How to check on line and print boarding pass
pusi kurac
Assuming you are using an iPad or iPhone, you would use Safari to navigate to the page where you find the boarding pass. However, the boarding pass must be in the PDF format. You can download Adobe Reader for free from the App Store. When you open it, there's a Help file which tells you how to open a PDF fie.
Similar Messages
-
How to check if file and printer sharing is on or off
Hi,
i want to evaluate if the windows file and printer-sharing is turned on or not with a script.
With regshot i found out that the DLL hgclp.dll is involved but not which registry-entry is the one set.i know it should be but on some machine it is not the case even if the domain-bind etc is fine.
Manual workaround is to look at each one by hand and set it to enabled. Gpupdate does not change something in these cases.
If i had a way to validate this setting via script it'd be faster. -
How do you get a list of your contacts nick names and their phone numbers on line and print them out? I've been trying to figure out how to get the list to print out but I can't even find a complete list to view on Verizon's web site. Does anyone know how to do this?
Log into your online account. In the, 'I want to', box type, Manage Contacts.
Place your cursor over any contact, a pop screen will appear with the option to print your contacts -
How to check plan line items for plan cost at network activity level?
Dear all,
How to check plan line items for plan cost at network activity level? The plan cost is done in network activity in CJ20N.
I am not able to check using CJI4 or CJI9 report.
Kindly advise.
Thanks and regards,
JessieHi Jess,
Have you checked the navigation part which is being displayed on left hand side of report S_ALR_87013565 and S_ALR_87013533.? There you have option to check transaction currency and object currency when you double click on it.
In case if it is not being displayed under navigation. Then you can bring them on from transaction code CJE2. For eg: Report group for S_ALR_87013533 is 12KST1C. Double click on it and it will open up to do changes in report layout and many more. There you also have options to bring on transaction currency too. Similarly, you can check for other report groups as well just by checking the report description.
But I am not sure if suits your requirements. Wait for other experts to comment on this.
Regards,
Amit -
How to print boarding pass from Safari?
I have a nagging problem I hope to find the answer to. I fly Southwest Airlines a lot and want to check-in online and print my boarding pass on my Mac. But the bottom half of the boarding pass page is covered with garish colored advertising that would empty my inkjet cartridges after one or two printings. Is there any way to print the top half containing the necessary boarding information and not print the bottom half, leaving it blank? I'd love to find an editing trick that would eliminate the ads. Thanks.
HI,
Go here and use the e-mail contact for help....
http://www.southwest.com/help/luvbook.html
There should be instructions for printing without the ads. I totally understand. Printing ads wastes ink.
Carolyn
Message was edited by: Carolyn Samit -
How to check the BW and BIA systems are up and working fine.
Hi friends,
how to check the BW and BIA systems are up and working fine. And also what is ICM, how to check whether it is working properly or not.
ANd what is name resolution and IP , how to check whether this is running fine.
regards, balu.Hi,
you can use process monitoring or the alert function in the standalone TREXAdmin tool.
ICM:
http://help.sap.com/saphelp_nw04/helpdata/EN/0a/a7903febb15a7be10000000a11405a/content.htm
name resolution
http://en.wikipedia.org/wiki/Domain_Name_System
IP:
http://en.wikipedia.org/wiki/IP
Please also have a look at the transactions TREXADMIN and RSDDBIAMON2.
I think it´s better if you use the forum search and google/wikipedia before you ask such questions.
Best Regards,
Jens -
How do I pull up ,and print files?
How do I pull up , and print files?
Hi prettyboyfloyd,
Are you referring to files saved in your Acrobat.com online account? If so, you can log in to your account at https://cloud.acrobat.com, and then select the file that you want to print. Click the Download link at the top of the file list. Once your file has downloaded, you can open and print it.
Best,
Sara -
How can I turn off Popup blocker to allow me to print boarding passes from Easyjet ?
How can I turn off Popup blocker to allow me to print boarding passes from Easyjet website ?
This helped greatly. However, some sites like banks now insist I use Chrome. How do I turn off pop ups in Chrome on my iPad ?
-
How to sync your mouse and key board to the desk top when both the indicators are flashing?
How to sync your mouse and key board to the desk top when both indicator lights are blinking? I changed the batteries and I dont know how to sync them when they both wont work to follow the step to sync them up...help!
The frozen was not clear in your first post…..
Have you turned the computer off and then back on (force quit if necessary by holding the power button)?
Try resetting the SMC:
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Press the power button to turn on the computer.
Barry -
How to check the memory and CPU usage on NPU
Hi expert ,
Could you tell me how to check the memory and cpu usage on NPU?
I think ASR1000 has this command (show platform hardware qfp active...) , but I coudn't find the same command on ASR9001.
I checked " show controllers np counters all" command, but I did not find it.
Platform: ASR9001
version: 4.3.2
NP: Tyhoon
Thanks,Hi Kanako,
understand your question, but something like that doesnt exist for the trident/typhoon NPU's for the asr9k.
in fact cpu usage is not really applicable for parallel/serialized hardware forwarders, but mainly the KPI is here
the PPS it handles.
The max pps it can handle is dependent on feature set.
What you could do is measure the rates on the PARSE_FABRIC_RECEIVE count (packets received from fabric, so egress direction), PARSE_ENET_RECEIVE count (packets received from the interface to the fabric, so ingress) and the LOOPBACK count, that is packets that are recirculated for extra processing. The sum of these 3 gives an idea of the PPS rate the NPU is working on.
Memory consumption is something tricky also, there are many memories attached to the NPU, notably:
TCAM used for vlan matching, ACL and QOS matching
Search memory for L2 and L3 (shared on Trident, separated on Typhoon)
Frame memory for packet bufferin in QOS
Stats memory, for all kinds of counters of QOS maps, interface stats etc
their usage is rather dynamic also.
The few things you want to verify on these are:
- ACL usage (in terms of Tcam entries)
- MAC table size (2M max on typhoon)
- FIB size (4M max on typhoon)
frame memory is dependent on the buffering, which is a sum of all the packets instant queue length and size of all pmaps attached to interfaces served by the same NPU. there is no good overview as to how much you have available of that, but it has a rather significant size 1G or 2G depending on the TR or SE cards (typhoon specific).
regards
xander
Xander Thuijs CCIE #6775
Principal Engineer
ASR9000, CRS, NCS6000 & IOS-XR -
Cannot view or print boarding passes from easy jet on ipad
cannot view or print boarding passes from easy jet which are viewed via Adobe Reader. Get a message to say Adobe Reader needed and it just goes round in a loop
Frankesca,
Please see Re: How do I find my easy jet boarding cards
It's best to get the easyJet app for iOS rather than trying to view or print the PDF version of your boarding pass. -
How to control the line number printed on check overflow
Dear All,
Our customer is on SAP2007A SP01 PL07, SQL2005, US localization. They don't have 3rd party add-on up and running when they print the checks. I have their database restored on PL08.
Administration >> System Initialization >> Print Preferences >> Per document >>
Print on: Check stock >> Overflow Blank Paper >> Maximum lines 10
Then if the check has more than 10 lines of invoices, SAP will print it on a blank paper.
However, the system print 12 lines on the blank paper ( < 1/2 of the paper) and go to the next page. How can we let the system print the invoice info on one page (One paper looks like could have over 40 lines).
I also reproduced this on SBODemo DB. May I have someone try it? Before I log SAP a tech support message, we would like to make sure if this is a SAP behavior.
Thanks in advance.
Regards,
Yuka
Edited by: Jie Jin on Feb 8, 2010 11:03 PMDear all,
I did more test today in their database.
1) Use stub-check-stub (system) PLD: Overflow is 12 lines per page (1/3 of the page)
2) Use stub-stub-check PLD: Overflow is 32 lines per page (2/3 of the page)
3) Use No stub-stub-check PLD: Overflow is 34 lines per page (2/3 of the page)
4) Use long stub-check PLD: Overflow is 30 lines per page (2/3 of the page)
5) Use check-stub-stub: Overflow is 48 lines per page (full page)
It looks like only check-stub-stub can print overflow invoices info on the full page. Other PLDs can only print overflow invoices info on the stubs. This can be reproduced on CA and US databases.
Is this a system behavior or a bug? If I cannot have an answer here, whom should I speak to? Thanks.
Regards,
Yuka
Edited by: Jie Jin on Feb 9, 2010 4:56 PM -
New owner here. I see that in printing I can select one page and print same. How do I select numerous pages from a document and print only those selected pages? I would not think that I can only select one page at a time. Thanks much
Just change the range as illustrated below. If you don't see that, click the Show Details button.
-
How to check schedule line PO text before PO saving.
How can i check the schedule line PO text before po saving. My idea is add a trigger in user exits. but i don't know how to check this data. I can't check the table stxh or stxl because those data are stored after PO saved. I think before that the data is stored in memory or somewhere. Could you give me some advise? thanks
Hi
Search for a correct user exit or BADI and you can check the text of the PO schedule line
Use the READ_TEXT fun module to fetch the text by passing the parameters OBJECT,OBJECTNAME,ID and LANGUAGE and fetch it and check it
<b>Reward points for useful Answers</b>
Regards
Anji -
Printing boarding passes, bar code coupons, and more
Please, I could really use some help,I never had this problem with my other pc's and printers. When I print a bar code coupon from my email only the restraunts logo prints, when printing a boarding pass the basic info is blank, when trying to print a statement from a hotel I downloaded only the logo prints-not the information. Map quest prints, seems like only more secure info doesn't. This is the first time I tried printing using this hp printer and a hp notebook pc .
Sorry that you all are having a problem printing barcodes. You can try to download an alternative driver to see if that will help.
(Shane_R) has a great post on how to download different drivers. Try the Deskjet 990c.
http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers-e-g-Windows-8/How-to-Assign-Alterna...
Let me know if this helps.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.
Maybe you are looking for
-
MPower with various issues (Bios, Volt, Heat)
Hello Good Morning & Good Evening readers from everywhere on the planet. I am having multiple issues with the newly assembled machine and i have 8 days left to "make it clean". This computer is not for me, it s a gift, a nice one. so i would like to
-
I am attempting to download the new update for my iPad. It gets approx half thru the process and then I get an error message. States that I cannot Download the update at this time. I have done this at least a dozen times. Still cannot complete the up
-
Problem with web service for document template
Hi, I am trying to set up a web service to use with a word template (I use the template designer). The problem is that when I press the 'Test Page' button in the web service tool, I get an error : "Error retrieving URL to Web service test page ...'.
-
Latest Flash continues to crash
I've spent the last hour trying to get either Firefox or Safari to run a flash site since I updated to the most recent Flash an hour ago. Your "5 easy steps" aren't working. I've uninstalled and reinstalled every bit of software pertaining to web use
-
ShellCreation -RFC destinations
When I run RFC Destinations I get only Control and sender system detail. Do we have to Add Central system and Receiver as well ? Thanks