How to check on which APs a wlan profile is activated on WLC4402

Hello,
we use a wlc4402 and several wlan profiles which are activated on different access-points (wlan override).
Does anybody know if there is a possibility to see a summary list of the aps on which a certain wlan profile is activated?
Best Regards,
Thorsten

Hello,
I tested it but did not get the output I am looking for.
What I am looking for is a list of all wlan profiles and for each wlan profile a list of all ap where it's activated, e.g.:
wlan profile 1
ap1
ap2
ap3
wlan profile 2
ap2
ap5
ap7
Does anybody further know how I can set the cli terminal length to 0 so that there is no page break (as term len 0 in ios)?
Regards,
Thorsten

Similar Messages

BI 4.1 How to easily find which APS is running a particular service?

I am trying to track down an error with BI4.1 version management (note 2008275)
and the correction says
"Ensure that only 1 APS server is defined with a "Lifecycle management service" and running across the entire cluster."
This led me this question, how can you determine which APS is running a particular service without having to hunt and peck through every APS?
I ran the 4.1 wizard and I have 20 APS.
Just curious if there is a better way for future reference.
Thanks
Lee Lewis

Hi Lee,
The BI Platform Support Tool would be the most productive/easiest way find and compare APS services,
See the wiki below:
http://wiki.scn.sap.com/wiki/display/BOBJ/SAP+BI+Platform+Support+Tool
~Valdrin

How to check from which table data is picking by datasource 0CDCY_ACT_ATTR

Hi Experts,
Could you please help me in finding out of the table from which datasource 0CDCY_ACT_ATTR is extracting.
As per my knowledge is should be extract from tables(infotypes) HRP5135 - 5141.If i am wrong please correct me.
Issue : My extractor(0cdcy_ACT_ATTR) is bringing wrong ACT_TYPE (Eg :5010) where as in table HRP5141 for that particular OBJID it is 9180( different).
Please help me why my extractor is bringing ACT_TYPE 5010.
This standard datasource and using Function Module : RCF_BIW_GET_ACTIVITY, How can i check from which table it is picking the data
Thanks in Advanve
Sree

Hi Sree,
In RSA3 on the first screen, you have the option to start debugging by marking the debug check box, once you put all the selections, click on execute and it will go to debug mode, then keep on pressing F5. It will debug your code line by line, then you can check for all the select statements.
Or once the debugging is started you will have the option to put break point on all the select statements in one shot, you can get in touch with your ABAP team.
Regards,
Durgesh.
Edited by: Durgesh Gandewar on Jul 24, 2011 8:20 PM

How to check to which sold-to a ship-to is linked to?

Hi experts,
I am new here. A simple question, how am I able to check to which sold-to ID a ship-to is linked to as all I have is the ship-to party ID only. Thank you in advance!

Hi,
Goto the table KNVP in SE16 ( partner function table) and enter the SHIP TO customer and execute the table
It will give all the Partners linked to the sold to
Please check and revet
regards,
santosh

HT1351 How to check iphone which country version is running

HOw to check which countary version running on my phone e.g austrailian us candian or indian etc

Hello jeet707,
Thanks for using Apple Support Communities.
Are you asking about changing the country your Apple ID is affiliated with? If so, directions on changing that can be found in the article below:
Change the country of your iTunes Store, App Store, iBooks Store, and Mac App Store account
http://support.apple.com/kb/HT6119
If that's not the issue, can you please clarify the issue you're experiencing?
Take care,
Alex H.

How to findout for which product category extended classic is activated?

Dear experts,
How to find out for which product category extended classic is activated? I am working in a test system. In spro settings, Cross aplication basic settings -> activate extended classic is unticked.
I see, the system allows me to create a Extended classic PO against a product category 001.
The product category has same ECC backend system as target and source system.
Is there any BADI implementation?
regards,
Ranjan

Hi
ECS - flag activated - means Extended classic scenario.
target determine badi - helps to create a PO in desired place.
source system and tatget system logical entry sjhown means
PRODUCT CATEGORY - created in Backend system and follow on docuemnts also created in ECC system - so it could be Classic .
as jay said determine log system badi used for DECOUPLE scenario ( Classic as well as ECS) .
some times unless we study the system in depth, hart to findout what is exact techniacl scenario.
or you can find out what type of POs are in BBP_PD for all PO means ECS.
This SRM tools can be used for many purposes.
some customers uses for Supplier registration only,
some one is using for only Bid invitation and Bid and selecting the vendor only
some one use for all non stock procurment only.
some one use for only free text - ....
taste vary in all business.
you must give more details like what are the Business docuement s are created in SRM
Muthu

How do you find out if the domain profile is active in the firewall?

A script needs to determine if a firewall profile is active. Does anybody know of a function to do this?
The problem I a trying to solve is when a server boots it may not activate the domain profile. It happens if the server is booted before a domain controller comes on line or if and adapter team is in use. To solve this, I run a script at boot
up that waits and then restarts the nla service and typically the domain profile will become active. However it isn't fool proof. I want to modify the script to verify that the domain profile has become active. However, I cannot find a function
to determine if the domain profile is active. Can someone help with this?

Are you using something with PowerShell 4.0 that has the NetSecurity module? The second part of that question will be based on the version of the Windows Operating System. To check, try this: Get-Module -Name NetSecurity. If you do, you can based your logic
around the Get-NetFirewallProfile and, perhaps, the Set-NetFirewallProfile cmdlet.
Get-NetFirewallProfile -Name Domain
Get-NetFirewallProfile -Name Domain | select Enabled
Get-NetFirewallProfile -Name Domain | select -ExpandProperty Enabled
(Get-NetFirewallProfile -Name Domain).Enabled
To enable (or, activate) the profile, you can pipe your Get- cmdlet to the Set- version of the cmdlet.
Get-NetFirewallProfile -Name Domain | Set-NetFirewallProfile -Enabled:True
Without access to this version of PowerShell and this module, you'll either need to use netsh and/or WMI. I haven't checked myself, but I wouldn't be surprised if you can find something in the
Gallery.

Snote, how to check in which notes have been implemented

hi guys,
how can i check which notes have been implemented in a particular system ?

Hi,
Go to SNOTE -> Click on SAP Note Browser (Ctrl+F9)
Here search all the notes in system
Regards,
Atish

How to check with which user id a request has been transported

Can anybody tell me how to find out with which id a request has been transported to a system?
Regards,
Sridevi

Hi,
To find who has moved the request.
In STMS, Go to import overview(F5). Select the system in which you want to see who has moved the request.
Then at the top menu, in GOTO select IMPORT HISTORY(Ctrl+F7).
Once you are in import history, at the top menu in EDIT select DISPLAY MORE(Ctrl + Shift + F1).
Then it will display the users list.
Hope this helps you.
Regards,
Ravi

How to Check files which is older than 14 days in particuler folder using IF condition in Batch script

Hi,
I have to check the zip files created before 14 days by using Batch script.
Any conditional statement needed ?
Thanks,
Jitu

But this script is failing if the files are not present in the same folder.
So I am thinking to loop the statement to check if files are not there exit from the loop.
The script does not fail - it reports that no files are found. You can detect this like so:
if %ErrorLevel% NEQ 0 echo "There are no zip files!"
There is no loop in your script that you can exit from.

How to check against which no GR done??

We allow IR to be done without GR. But this way, many PO accumulate in which no GR is appearing but IR is already done. We have no tracking mechnism to identify such POs. We look manually in each PO whether GR has been done or not. Is their any standard report which shows this?? Or can this be created thru abap??

hi
user tcode : ME2N
USE : SELECTION PARAMETER
RECHNUNG   Open invoices    : GOOD RECPIT BUT INVOICE NOT PASS.
WE101      Open goods receipt :
WE102      Goods receipt exists
WE103      Open goods receipt

How to check which is th best method to use in LSMw and the file

Hi all,
I am new to LSMW,
Can know me when i get the file , how to check the which is the Best method ( Batch input, Direct input,BAPI, IDOC) have to use in LSMW .
How to check the input file is completely filled and how to check whether it is correct and also how to Prevalidation check has to be done fior the file before uploading.
Can you provide any documents LSMW also Apprecited.
Regards,
Madhavi

Hi Madhavi,
To check Correctness & completeness of the file:
1. The input file structure should be same as source structure what you defined whicle creating LSMW.
2. Check the following steps to assure the field mapping is done correctly.
a) Maintain field mapping & conversion rule
b) Check 'Display Read data'
c) Check ' Display Converted data''
Please note LSMW is a tool, which will simply upload the data whatever you are providing. So you need to be careful while making your file and validate it outside SAP ( before upload start)
Pradeep D

How to check weather BI Objectu2019s are imported and exported

Hi to all,
Some one has created INFOCUBE, DSO, DTP, transformation.
My question is how I will check it, weather Objectu2019s are imported and exported or not.
How to check under which request number it have been saved.
Please can any one tell the step for that?
I SHALL BE THANKFULL TO YOU FOR THIS.
Regards
Pavneet Rana

Hello Pavneet,
If you goto trans SE09/SE10--> Enter your User ID or * under user & then click on Display.
You will be able to see all the TR's & if you drill it, you will be able to see all the objects collected under that TR.
Hope its helps!
Regards,
Pavan

How to check ms sql server instance resides on whch server ?

hi team,
i am new to ms sql server dba, i have ssms installed in one server and from there i am acceesing all ms sql server instances , how to check in which physical server these instances(databases) resides ? any views will help me ?
thanks
pgr

SELECT SERVERPROPERTY('ComputerNamePhysicalNetBIOS');
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

How to Check JMS Queue in BPEL

Hi All,
we have a case where SOA shows message is successfully sent to TIBCO, But it is not available in TIBCO queues.
We have the property file used by BPEL for different instances and the JMS queue mentioned are different for different instances.
So how to check to which TIBCO queue SOA sent message through BPEL.
Rgds,

Based on the JNDI look up used, you can determine the instance. Iam not sure this is the right way but you can try this.
Thanks,
Vijay

How to check on which APs a wlan profile is activated on WLC4402

Similar Messages

Maybe you are looking for