How to check oracle is running or not

Hi,
Can any one help me the command to check whether oracle is running or not, in UNIX flatform.How to check the Disk+Work proess is running or not.

Option1 :Logon to SAPDBA...U will be able to see whether Oracle is running or not.
Option 2:
Sqlplus /nolog;
connect / as sysdba;
startup;
If it is already running: you will get msg that Oracle is already running
Oprion 3: ps -eaf|grep ora
to determine whether disp+work is running or not:
Option 1: ps -eaf|grep sap
Option 2: dpmon pf = <path of instance profile>
Reward Points if helpful!

Similar Messages

How to check oracle properly installed or not?

Hello Friends,
How to check oracle properly installed or not. cause during installation time the person who installed faced many problems. we have RISK base IBM p5 Series server and Oracle 10g RAC.
i want to check installation made properly or not.
Thanks,
Nikunj Patel

Installation for RAC environments means you are not only talking about one single installation, but several installations, and the number of installations and checking processes depend on factors such as the clusterware you are using, if you are using the Oracle clusterware or the proprietary clusterware, if you are using a separate oracle home to install the ASM or if you are using the same oracle home for both, the ASM and the RDBMS.
First you must ensure you have installed all prerequisites according to your platform, i.e. patches, packages, kernel parameters, etc. which are listed at the install guide corresponding to your platform. Then you should use the cluvfy (cluster verifier tool) to check if the different install phases are properly installed
The most critical and most of the times, problematic installation phase is the clusterware. So you should specify if you installed the Oracle clusterware or the proprietary clusterware. In a RAC environment if your clusterware is not properly installed, most probably you won't have a running RAC, so if your environment is functional there you may have high probabilities that it is OK, but to make sure, launch the cluvfy tool.
The cluvfy tool verifies the process since the beginning and it ensures your environment meets the required minimum requirements to be at an operational level, it checks the pre/post install phases for the clusterware, pre/post install of the rdbms, and it is launched from the OS. It can be obtained as a standalone product or you can use the one found at the clusterware Oracle Home. For further references on this tool I suggest you to read this
Oracle® Database Oracle Clusterware and Oracle Real Application Clusters Installation Guide
10g Release 2 (10.2) for AIX
Part Number B14201-04
~ Madrid

How to check program is running or not

Hi,
Is it possible to check whether a program is running or not?
I know when you try to compile a package which is running, oracle does not allow you compile it, it hangs. That is, somehow, Oracle knows the program is running. How can we check this information?
Suppose procedure below. If i ran it in one session, how can check that procedure p is running in other session?
I searched the forum. There is one( checking if a package procedure is already running ) thread but noone has replied.
Thanks....
SQL> DROP TABLE T;
Table dropped
SQL> CREATE TABLE T AS SELECT DUMMY D FROM DUAL;
Table created
SQL> CREATE OR REPLACE PROCEDURE p IS
2    s VARCHAR2(12);
3 BEGIN
4    SELECT d INTO s FROM t;
5    LOOP
6      EXIT WHEN s = 'Y';
7      SELECT d INTO s FROM t;
8    END LOOP;
9 END p;
10 /
Procedure created
SQL> exec p;

I found the answer from another thread.( Package Compilation Hangs )
Answer is : http://www.ixora.com.au/scripts/sql/executing_packages.sql

How to check site is running or not

I want to check whether a particular site like xyz.com running or not from java
desktop application to perform action if it is not running .
Thanks

If you want to get more thorough you can use the HttpUnit library, which is designed for excercising a web site and testing the responses are as expected.
Try sourceforge.net

How to check table is creating or not

Hi,
I am creating only one table by running a table creation script(table.sql) which contain 366 partition.but I dont know whether table is creating or not.it is taking long time,sometimes I feel like script is hanging.even before running the script I have even spooled but spool file shows nothing. so how to check table is creating or not from background? can anyone please let me know abt this.this is bit urgent
sql>spool table.log
sql>@table_partition.sql

hi,
I am running the script table_partition which consist of 366 partition and 31 sub partition but the script is hanging.there is no hint in alert log file or anything wat might be the reason is it because of extent size? as extent size for this tablespace where table has to be create is 1mb,wat i suspect is do i need to set for higher value inorder to avoid this?
with regards;
Boo

How to check Reconcilliation has happened or not for a payment document

Hi,
How to check Reconcilliation has happened or not for a payment document? Payment doc ABCDEF was created on 2nd. Now i am not sure whethr RECON has happend ot not
Please help.

Dear,
If you have made payment to vendor and want to know whether reconciliation happened or not then check if this document exist in table BSIK then reconciliation has not been done.
Regards,
Chintan Joshi.

How to check table is NULL or not when a form load?

How to check table is NULL or not when a form load?
I want to make the form when it load it check the data in table, if there are no data in table other form will be load.
Sorry for bad English...

Maybe you can do this in form1's Form_Open event:
if dcount("*", "table1") = 0 then
Cancel = True
Docmd.Openform "form2"
end if
-Tom. Microsoft Access MVP

How to make oracle is case insentive ( not case sensitive)

SqlServer by default is NOT case sensitive (data content) while Oracle by default is case sensitive (data content).
please help me to give the solution
How to make oracle is case insentive ( not case sensitive)
if there is anyway to make Oracle behave like SqlServer changing NLS settings or any other Oracle settings?
I have solution for application level . it is working fine
Possible solutions:
1. You want to store data case insensitive: do an 'insert...
values(upper('Abcd'))...'.
This will put your data in upper case into the tables.
2. Your data will be mixed-case and you want to select them case
insensitive:
create 'function based indexes' on every column you want to use in
your where-clauses.
Then 'select ... where <column_name> = 'ABCD'.

What version of Oracle? Oracle 10g has a capability that can toggle this feature on and off at the session level. Prior versions do not.
For prior versions you usually have to make use of the upper and/or lower functions in your queries. Sometimes a function based index, FBI, is used to handle this.
HTH -- Mark D Powell --

How to check one table exist or not in SAP

Hi, Gurus:
How to check one table exist or not in the SAP.
Thanks,

Hi,
Query the table DD02L..
Select single * from DD02L where tabname = 'Your table name'
AND TABCLASS = 'TRANSP'. " For transparent tables.
Thanks
Naren

How to check internal table sorted or not

Hi all
I need to check internal table sorted or not which is without header line and having only one field and six values. please let me know how to check it is sorted or not because i need to display message if it is not sorted.
thanks,
Minal

Hi Minal,
Go through this info.
Sorted tables
This is the most appropriate type if you need a table which is sorted as you fill it. You fill sorted tables using the INSERT statement. Entries are inserted according to the sort sequence defined through the table key. Any illegal entries are recognized as soon as you try to add them to the table. The response time for key access is logarithmically proportional to the number of table entries, since the system always uses a binary search. Sorted tables are particularly useful for partially sequential processing in a LOOP if you specify the beginning of the table key in the WHERE condition.
Stable sort
The option
SORT <itab> ... STABLE.
allows you to perform a stable sort, that is, the relative sequence of lines that are unchanged by the sort is not changed. If you do not use the STABLE option, the sort sequence is not preserved. If you sort a table several times by the same key, the sequence of the table entries will change in each sort. However, a stable sort takes longer than an unstable sort.
Examples
DATA: BEGIN OF LINE,
        LAND(3) TYPE C,
        NAME(10) TYPE C,
        AGE      TYPE I,
        WEIGHT   TYPE P DECIMALS 2,
      END OF LINE.
DATA ITAB LIKE STANDARD TABLE OF LINE WITH NON-UNIQUE KEY LAND.
LINE-LAND = 'G'.   LINE-NAME   = 'Hans'.
LINE-AGE = 20.    LINE-WEIGHT = '80.00'.
APPEND LINE TO ITAB.
LINE-LAND = 'USA'. LINE-NAME   = 'Nancy'.
LINE-AGE = 35.    LINE-WEIGHT = '45.00'.
APPEND LINE TO ITAB.
LINE-LAND = 'USA'. LINE-NAME   = 'Howard'.
LINE-AGE = 40.    LINE-WEIGHT = '95.00'.
APPEND LINE TO ITAB.
LINE-LAND = 'GB'. LINE-NAME   = 'Jenny'.
LINE-AGE = 18.    LINE-WEIGHT = '50.00'.
APPEND LINE TO ITAB.
LINE-LAND = 'F'.   LINE-NAME   = 'Michele'.
LINE-AGE = 30.    LINE-WEIGHT = '60.00'.
APPEND LINE TO ITAB.
LINE-LAND = 'G'.   LINE-NAME   = 'Karl'.
LINE-AGE = 60.    LINE-WEIGHT = '75.00'.
APPEND LINE TO ITAB.
PERFORM LOOP_AT_ITAB.
SORT ITAB.
PERFORM LOOP_AT_ITAB.
SORT ITAB.
PERFORM LOOP_AT_ITAB.
SORT ITAB STABLE.
PERFORM LOOP_AT_ITAB.
SORT ITAB DESCENDING BY LAND WEIGHT ASCENDING.
PERFORM LOOP_AT_ITAB.
FORM LOOP_AT_ITAB.
LOOP AT ITAB INTO LINE.
    WRITE: / LINE-LAND, LINE-NAME, LINE-AGE, LINE-WEIGHT.
ENDLOOP.
SKIP.
ENDFORM.
************rewords some points if it is helpful.
Rgds,
P.Naganjana Reddy

Help! how to check the SQL run in Oracle?

Hi all,
I have a problem. the developer said the SQL written in Java code are not the one executed in Oracle DB. that mean the query is some how manipulated by some PL/SQL so the final query run in Oracle is different. So can someone teach me how to check the actual SQL run in Oracle?
Thanks a lot.
Regards,
Jason

Hi Michel Thanks. But it looks like the query stored in v$sqlarea is not the final executable SQL. for example, the code in application is "select column_A from default_table where column_A = ?" and this ? will be given some value in run time. the query stored in v$sqlarea will be like "select column_A from default_table where column_A = :1"... what is this :1?
Also if some PL/SQL procedure appends some condition to the SQL, is it possible to view the full query from database side?
ok, let me try trace and tkprof first.

How to check MAxl is running properly or not

Hi All,
i am working on ASO cube which has to implement Automation for dimension building and data loading. I am unable to execute even a single sample systax with out error. Is there any specific method to use Maxl in ASO cube or any precautions to be taken in ASO for Maxl scripts.
I don't know it is a foolish question or not to ask like "how to check the Maxl is working properly or not" bcoz it is raising me doubt by raising error for sample script also.
please help me out from this issue .
Regards

Can you log into Essbase through MaxL interactively.
If so, can you do it from a script? Something like:
login username password on servername ;
exit ;
If you can't do the first, yup, your MaxL client is hosed or you don't have a valid username/password. Or you don't know the servername.
If you can't do the latter, perhaps your client (could be the server itself, if you're running it from there) has a pathing issue when running batch files.
If both work, it is a syntax issue. Now you're just faced with your mistake(s). :) But at least you don't have to spin wheels trying to figure out if MaxL is working or not.
Regards,
Cameron Lackpour
P.S. You might want to try using the MaxL editor in EAS and see if your login code works there. I believe (not sure, but I think so) that EAS has its own flavor of MaxL as I know you can run code there without having the Essbase client installed on a local machine.

How to check whether MRP run has been executed for a sales order or not

Dear Experts,
In Strategy:20, Make to Order scenario, I have run MRP for sales order in T Code:MD50,
then how can I check whether MRP run has been executed for a sales order or not. Is there any report where I can find some indication?
Thanks and regards,
Vikas

Dear,
In MTO scenario with Planning strategy group 20 in material master .
After sales order is created, Run MRP , then planned order will be created then go to planned order details in MD04 or MD12 you will get sales order number in assigment tab.
or check the Table PLAF field PALTR ,and field name KDAUF its sales order, for all created planned order.
Regards,
R.Brahmankar

How to integrate Oracle Portal running on Oracle Application Server 10.1.2

I have an Oracle Portal running on a Oracle Application Server 10.1.2.
Portal is responsible ( along with OID ) for the users authentication and authorization.
There is a new JEE application that was developed recently, which the Portal users must have access to.
HOW can I put a link into a page of the Portal, that redirects the portal user to a new browser window displaying my new application?
HOW can this new application, running in a separate weblogic 11g (10.3.5) server, automatically authenticate with the same username/password previously authenticated when the user logged into the portal?
Any ideas?
I´ve already thought in a bunch of ways to do it:
- put a link into the portal with a sessionId, then when opening the new app, it automatically tries to use the same session. How can I configure this session id during the creation of the portal's page? How can I use it from the new app to use the same session?
- put a link into the portal with a userid, then when opening the new app, it automatically tries to authenticate using a different authentication provider configurated in WL, which points to Portal´s OID. In this situation, how can I ensure that the user is already logged in and the session has not timed out?
- Should I use OSSO?
- Should I use OAM?
Any help would be appreciated!
Murilo

Hi Murilo,
A portletized version of your J2EE app would probably have been ideal for your purpose as it would handle both authentication (through SSO) and session information (through Portal framework as the framework can pass session information to the provider/producer). This would require changes to the application however.
Easiest approach would be to use mod_osso to protect your J2EE application. SSO would then handle the authentication for your Portal and your J2EE application.
Thanks,
EJ

How to check patch level applied or not?

how can i check that bellow patches are applied or not as mentioned for patch no 7427746.
- FA.M mini-pack or later
or
- FIN_PF.E or later
and
-ATG H RUP4() or higher
thanks

Hi;
how can i check that bellow patches are applied or not as mentioned for patch no 7427746.
- FA.M mini-pack or later
or
- FIN_PF.E or later
and
-ATG H RUP4() or higherPlease check :
- How to check which Techstack patchsets have been applied [390864.1 ]
Regard
Helios

How to check oracle is running or not

Similar Messages

Maybe you are looking for