How to check owner for one interface in production system?
Hello All,
Please tell me the transaction were i can check owner for one interface in production system.
Client had created owner for one interface, so were can i check it.
Thanks and Regards,
Chinna
Thanks for the reply,
i dont want to check the developer name in IR /ID.
in production system one interface is running and i got mail to check the generic user and role for that interface.
iam also bit confused on it
If u have any idea let me know.
Thanks and regards,
chinna
Similar Messages
-
How to make JOB CONTROL setting for delta extraction in Production system .
Hello All,
We are in the process to transport our development to PD server in BI . We have transported the data sources to ECC production and now we are filling the setup table for " SD BILLING BW " . After filling Setup table data in full mode through infoPackage we have to load data in delta mode .
How we can set our Update mode(LBWE setting) in PD server ?
Is LBWE T.Code authorisation required in ECC PD server to make the setting of Update mode or We have to set all Job Control Paramater in Dev System at the time of transport the datasource request to ECC production . Is our time which is set in job control of ECC development will be reflected in ECC production ?
can any body tell me about how to make setting for delta extraction in Production system .
Thanks ...Hi,
How do you load the data in the development system?
- you set up the update mode in the infopackage. There you must customize "Initialization"
- you have to filled the setup table in the production system without laoding the data in the BW? then this step was for nothing. Filling the setup table and do the INIT in the BW, this must be together - during no changing will be done in your R/3 SD.
Sven -
How to check performance for Stored procedure or Package.
Hi ,
Can any one please tell me , how to check performance for Stored procedure or Function or Package
Thanks&Regards,
Sanjeev.user13483989 wrote:
Hi ,
Can any one please tell me , how to check performance for Stored procedure or Function or Package
Thanks&Regards,
Sanjeev.Oracle has provided set of Tools to monitor the Performance.
Profilers being one of them; If you wish to understand more on PL/SQL Optimization, please read PL/SQL Optimization and Tuning.
See example of DBMS_PROFILER.
See example of PLSQL Hierarchial Profiler -
My form has a list of yes or no questions. I want to use either cheboxes or radio buttons. Unfortunatly I can't make it work. When I check yes for one question, it marks all yes answers for all other questions. If I mark some radio buttons to answer, it unmarks later. Need immediate help!!!
Is it that you are using a PDF-based form? Did you copy and paste the Yes/No fields all the way down your form? If so, then all of the yes/no boxes are copies of each other and have the same name and properties in the PDF.
For example, if you had:
Question 1 and Question 1 Yes/No checkboxes
Question 2 and Question 1 Yes/No checkboxes
Question 3 and Question 1 Yes/No checkboxes
Question 4 and Question 1 Yes/No checkboxes
Then whatever answer you selected in Question 1 would populate down through the rest of the form.
Changing the Yes/No field properties in questions two through four would eliminate the problem.
I hope that helps,
Brian -
Reg:How to check Vendor for particular Asset
HI
How to check Vendor for particular Asset?
regards
JK raoHi,
Good morning and greetings,
It would be very difficult to go into each and every asset and display the asset...instead create a quick viewer query using SQVI and use the table ANLA and the field name is LIFNR for Vendor Code and for Asset Number it is ANLN1.
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan -
Quantity conversion check failed for one item; all qty lines deleted
Hi IS Oil Experts,
Iam using the BAPI "BAPI_GOODSMVT_CREATE_OIL" for posting goods movement. I filled the additional quantities and unit of measures also in the BAPI table, But when tried to execute, Iam getting the error, "Quantity conversion check failed for one item; all qty lines deleted"
Please anybody tell me what is the error from end for resulting this message.
Thanks in advance
PrathibDear you!
I also get the issue that you meet. Can you help me to process it, Please/
Best regards, Huy. -
How to put condition for one date range should not interfear with another ?
hi friends,
how to put condition for one date range should not interfear with another date range.
my data base table has two fields
from date
to date.
when we enter the date range in the data base , new date range means from date and to date should not interfear.
can anybody help me.
thanks &Regards,
Revanth
Edited by: rk.kolisetty on Jul 1, 2010 7:18 PMDo it the SAP way....
First entry...from is today, to is 99991231.
New dates entered, now we have two rows...:
from is original date to becomes yesterday.
From is today to is 99991231 -
How do I pay for one month subscription to convert a ms word file to excel file?
How do I pay for one month subscription to convert a ms word file to excel file?
Hi,
I need to know do you want to convert word PDF file into Excel file or something else?
Please elaborate.
Regards,
Florence -
How we can monitor while import request in production system?
dear friends,
will you please explain me
how we can monitor while import request in production system?
and
what are the things we have to monitor during the transport?
thanks
regards
zaheerHello Zaheer ,
I would always recommend to check that you have the latest transport tools, tp and R3trans in use in the system to avoid import errors.
Check with
tp -v
R3trans -v
if either are more than around 4 months old, I would strongly recommend to download the latest for your release from the SAP service marketplace. This avoids needlesly encountering issues that have been resolved in more recent patch lebels of these tools.
During the import, it is important to check the contents of the directories
usr/sap/trans/tmp
and
usr/sap/trans/log
that they are being continously updated which shows import is progressing.
Most important, keep checking the latest entries in the alog, uloag and slog to see which phases and trasnports are currently being imported.
If a transport fails, check these logs and the latest ones updated in usr/sap/trans/log for further details on the failure.
If there is an error please NEVER manual run any commands wihtout contacting SAP and having them analyse the issue.
When opening a message, be sure to include the latest alog, ulog and slog, along with the last few files most recently updated in usr/sap/trans/log and if possibel open an R3 connection to the import system.
Best regards,
Paul -
How can I get the number request's (count) for One interface
Hi Guru's,
I have a requirement,One interface say Hello world._How can I get the number request's (count) for this interface_.I thing with BAM it's possible.
But I have no idea about BAM.If is there any alternative please give directions and instruction how to achieve this task.
Can any body help.Thanks in advance.
Regards
ManiYou have to query the SOA_INFRA schema to get the answer.
Build a select query in cube_instance table.
Thanks,
Vijay -
Message splitting-- Queue stopped when no message created for one interface
Hi all,
I think you saw one post regarding this issue in SDN, but I can't find the post any more.
So, I have message splitting (it's multiple mappings to map one outbound msg to multip inbound msgs, not one mapping to map 1 to n. This is because of our own reason, but should not affect the analysis of the issue) to split one message to multiple. It works fine if the outbound message contains data for every inbound interface. However if the outbound message does NOT contain data for any one inbound message, there is an error in MONI and all subsequently splitted messages will not be passed in IE. The error in MONI says Split mapping created no messages, and Queue status turns to be Queue Stopped, and thus all the subsequently splitted messages are stuck in the queue.
Why this? and how to solve this problem?
Thanks
Jayson>
Jayson wrote:
> Hi all,
>
> I think you saw one post regarding this issue in SDN, but I can't find the post any more.
>
> So, I have message splitting (it's multiple mappings to map one outbound msg to multip inbound msgs, not one mapping to map 1 to n. This is because of our own reason, but should not affect the analysis of the issue) to split one message to multiple. It works fine if the outbound message contains data for every inbound interface. However if the outbound message does NOT contain data for any one inbound message, there is an error in MONI and all subsequently splitted messages will not be passed in IE. The error in MONI says Split mapping created no messages, and Queue status turns to be Queue Stopped, and thus all the subsequently splitted messages are stuck in the queue.
>
> Why this? and how to solve this problem?
>
> Thanks
> Jayson
Hi Jyson,
what i analyse from this is you may be using different maapings and different inbound interfaces
but your receiver is the same and hence you are using only one interface determination with all the interface mappings specified there...
if this is the case..i suggest you remove the "maintain order at runtime "
tick in that interface detemination and it will surely work
giving points is another way to say thanks
Edited by: Tarang Shah on Mar 20, 2009 7:18 PM -
How to keep logs for one week through sm36 jobs creation
Hi
As i define a job through sm36. Its logs removed next day , but its logs removed through sm37 through next days. But some of the job logs does not removed for even one week. can somebody be help me to sort it out . I want to keep job logs for one week then where i have to define it. If some job is defined which remove all these logs then where we have to define that these logs will remain for one week , because some of the job logs will remain there for one week.
Thanks in advance
Regards
Ravi Kant Arya
+91 9999530385Hello,
please check the variants of the report used in the job SAP_REORG_JOBS. With the report RSBTCDEL2 you can specify very detailed how long logs should be kept for which jobs (e.g. depending on the job name or job class).
Regards
Christian -
How to Make installer for one Computer ?
Hello All,
I want to make application installer only for one computer, like single license copy how it is possible in LabWindows/CVI ?
Is there any LabWindows build-in option or how it will possible ?
Regards
Umer
Solved!
Go to Solution.I don't think there is a bult-in capability to create an installer that will run on a single PC, but you can incorporate in your application instructions on some hardware item of the target system and create your own licensing algorithm on them.
This subject has already been discussed in this forum: you can look at this thread and this other one.
In the last page, I mention a sample of mine which is available on the Community: I have updated it to retrieve the disk serial number also, as it can be useful to get a unique sign for a specific PC; the sample uses WMI to get system infos: you can find the modified version attached to this message. You need full CVI version to run the sample.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?
Attachments:
CallWMI_2.zip 11 KB -
How many egift cards for one order?
I had emailed customer service asking how many egift cards could be used for one online order, and I was told you could use 5 per online order, and 10 in store. But then I saw this link in the customer service catagory, and it says you can use 10 gift cards per online order.
http://www.bestbuy.com/site/help-topics/gift-cards/pcmcat203400050004.c?id=pcmcat203400050004
Can I use 5 or 10 gift cards for a online order? I have 7 $100 gift cards I want to use to make a online purchase. Thank you.Hello stephanielynett,
Thank you for posting your concern on Best Buy Unboxed forum. Ready to use the e-gift cards that you have been saving from Birthdays and special occasions, and not sure on how many can be used in an order, can have an impact on how you place your order.
To the best of my knowledge, the most updated information is found on the link that you shared on this forum. You should be able to use to 10 e-gift cards per order.
Have a great day,
Karina|Social Media Specialist | Best Buy® Corporate
Private Message -
Installed ram, how to check it for faults?
I've ordered my first Mac, (27 inch iMac) and I've ordered some ram to install in the iMac when it arrives.
I was wondering, how do I check the installed ram for faults?
Is there a application etc with Mountain Lion that would allow me to do this?
Thanksshldr2thewheel wrote:
tal1971 wrote:
I was wondering, how do I check the installed ram for faults?
Is there a application etc with Mountain Lion that would allow me to do this?
the apple hardware test (AHT)
I've had a look at the link but couldnt see any mention if it checked ram for faults. Can you confirm that it does check ram for faults?
Thanks for the help, appreciate it.
Maybe you are looking for
-
Hello all, We are on 2004S and I have this question about the PDF funtionality. We are planning to roll out the BI Web queries with out using the EP. I know that Java Stack must be running on the BI Server. So, if the JAva stack is running on the ser
-
IPhoto 7.1.3: Can view and enlarge photos but cannot see them in edit mode
When selecting and attempting to edit photos, the photo does not appear in the "edit" window below the thumbnails. This "edit" window remains blank. Edit functions appear operable but I cannot see what is happening to the photo until the edit has bee
-
'''bold text'''
-
Satellite L50-B916 - wireless connection issue
Hello I bought my Toshiba Satellite L50-B916 less than 6 months ago, and had to download all the drivers myself because for some reason, the OS didn't come with it. Went to the TOSHIBA MEA website to download and install corresponding drivers. Downlo
-
Applet screen location for frame
Can anyone help me please? I would like to create a frame which appears in the center of the parent applet. How can I do this? Cheers Dave