How to check PDS after CIF
Hi All:
I activated a Intergration model with PDS and BOM, but how do I see them in APO.
I did try in SCE but couldnt find them.
Help requested. Thank you
Mono
hi mono
you can see it in the masterdata> PDS> display PDS
you cant see it in the SCE without assigning it to a model
Similar Messages
-
How to check data after mapping for BPM if the mapping done outside BPM ?
Hi.
I have simple scenario BPM. Proxy -
> JDBC. I have 1 message mapping in between PROXY and JDBC.
and i have put the mapping outside the BPM (i didn' use transformation step). In case error happen. how i can see the data after the mapping ? i am always got difficulty to check the data if i have mapping outside bpm.
Thank you
FernandHi
In case error happen. how i can see the data after the mapping ?
You have used mapping in interface determination of corresponding receiver determination. In transaction SXMB_MONI, open message corresponding to that receiver determination. There in left hand side you will see IS pipeline steps. There if you want to see message payload that is input to Mapping than see payload of any pipeline step before Request Message Mapping and test it in Design. If mapping fails you can see trace of the same step.
Request Message Mapping ---> SOAP Header ---> Trace
There you can see where your mapping failed.
And as rohit replied you can also get message from RWB.
For further clarification revert back to us.
Regards
Sami
Reward points if helpful. -
How to check version after i apply pacth
Hi
I'm going to apply patch with the ID# 9355677 - R12.1.2 UNABLE TO SAVE THE TAX CLASSIFICATION FOR A SUPPLIER TYPE EMPLOYEE
my question is
in the readme file
there is a portion that i need to check the version of the following file
$JAVA_TOP/oracle/apps/zx/schema/server/PartyTaxProfileEOImpl.class 120.17.12010000.4
$ZX_TOP/patch/115/sql/zxcptytaxprfileb.pls 120.9.12010000.4
$ZX_TOP/patch/115/sql/zxcptytaxprfiles.pls 120.3.12010000.2
how do I know the version?
do i need to execute command so that i can able to check version?
thanksHi,
Use adident or strings command to get the v ersion.
Use the strings command or adident to get the version and use the class file instead of the java file, thus:
$ strings -a <file name> | grep Header
You should find similar answer in old threads (search for: how to find file version).
File Versions
File Versions
Thanks,
Hussein -
How to check call duration for total dialled calls (after resting) on a particular day in iphone 4?
Is there a solution like iphone 5, i.e.Settings > Cellular.if the device is unlocked cellular is called mobile
-
How to check similarity between two Databases 9i & 10g after imp in 10g
Dear all,
Source
=======
OS server ==> HP-UX
Oracle version ==> Oracle 9.2.0.8
DB Name ==> MSST
DB total users ==> 320
Full export in ==> /u02/export/Jan09.dmp
Tablespaces ==> SC, SC_I, SA, SA_I, PP, PP_I, AC, AC_I, SD
Destination
============
OS server ==> HP-UX
DB Name ==> CHDB
Existg DB users ==> 20
Oracle version ==> Oracle 10.2.0.4
copied 9i dump file in ==> /u03/export
Tablespaces created same as Oracle 9i i.e;
Tablespaces ==> SC, SC_I, SA, SA_I, PP, PP_I, AC, AC_I, SD
I had run full import on Destination server i.e; Oracle 10g & following is the command i used:
imp system/pwd@conn_string file=/u03/export/Jan09.dmp log=/u03/export/Jan09_imp.log full=y ignore=y statistics=none
*=== Imported successfully with few errors like ====*
IMP-00017: following statement failed with ORACLE error 2299:
"ALTER TABLE "EMP_PROMOTIONS_ORD" ADD CONSTRAINT "EMP_PROMOTIONS_ORD_UK" UN"
"IQUE ("EMP_NO", "RANK_NO_FOLLOW") USING INDEX PCTFREE 10 INITRANS 2 MAXTRAN"
"S 255 STORAGE(INITIAL 65536 FREELISTS 1 FREELIST GROUPS 1) TABLESPACE "PP" "
"LOGGING ENABLE "
IMP-00003: ORACLE error 2299 encountered
ORA-02299: cannot validate (PP.EMP_PROMOTIONS_ORD_UK) - duplicate keys found
ORA-02299: cannot validate (PP.EMP_PROMOTIONS_ORD_UK) - duplicate keys found
. . importing table "EMP_PROMOTION_DETAILS" 13333 rows imported
. . importing table "EMP_PROMOTION_MAST" 725 rows imported
. . importing table "EMP_PUNISHMENT" 271 rows imported
. . importing table "EMP_REPORT_BOOKS" 60528 rows imported
. . importing table "EMP_SALARY_HISTORIES" 120871 rows imported
. . importing table "EMP_SALARY_HISTORIES_TEMP" 77044 rows imported
. . importing table "EMP_TRANSACTIONS" 96536 rows imported
IMP-00017: following statement failed with ORACLE error 2299:
"ALTER TABLE "EMP_TRANSACTIONS" ADD CONSTRAINT "TRANS_UK" UNIQUE ("EMP_NO","
" "DIR_NO", "DIR_DATE", "TRN_CODE") USING INDEX PCTFREE 10 INITRANS 2 MAXTRA"
"NS 255 STORAGE(INITIAL 65536 FREELISTS 1 FREELIST GROUPS 1) TABLESPACE "PP_"
"I" NOLOGGING ENABLE "
IMP-00003: ORACLE error 2299 encountered
ORA-02299: cannot validate (PP.TRANS_UK) - duplicate keys found
Now my question is
===================
How to check everything is same/similar like Oracle 9i database ( source ), for example ( i used this technique ):
Can anyone tell me how to check similarity between two Databases 9i & 10g after import in 10g.
MSST_DB>SHOW USER
MSST_DB>SA
MSST_DB>select object_type, count(*) from user_objects group by objects;
OBJECT_TYPE COUNT(*)
DATABASE LINK 2
FUNCTION 23
INDEX 1795
LOB 6
PACKAGE 8
PACKAGE BODY 8
PROCEDURE 30
SEQUENCE 67
SYNONYM 60
TABLE 644
TRIGGER 3
VIEW 20
CHDB_DB>SHOW USER
CHDB_DB>SA
CHDB_DB>select object_type, count(*) from user_objects group by objects;
OBJECT_TYPE COUNT(*)
INDEX 1794
PROCEDURE 30
TABLE 644
TRIGGER 3
VIEW 20
FUNCTION 23
SYNONYM 60
PACKAGE BODY 8
SEQUENCE 67
PACKAGE 8
LOB 6
Edited by: VIKHARAHMED on Jan 10, 2012 3:02 AM[url http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_export.htm#sthref67]Guide.
-
Apple iphone 4s get hot after playing high games,how to check Apple iphone real
Please tell how to check Apple iphone 4s is real.....?
Apple iphone is heating after playing high games
please tell me the details
after checking the details .how we ll find Apple iphone is realhello ,
After entering the serial no i can see the details are her below,pease give me the details of thi s ok
here your options
Here are your options.
Here are the support and service options available where you are.
Contact Apple Support
Give us a call when you’re ready and we’ll get you the help you need.
Take in for Service
Find a local Apple Authorized Service Provider or make a reservation at the Genius Bar.
cantact apple suport -
How to check JNDI contents after 9iAs startup?
Dear all:
How to check JNDI contens after 9iAs server startup ?
Does the 9iAs have JNDI tree can show all JNDI contents.Hi,
define ValueChange listeners on the component and when the user hits the command link or button to navigate off t he page, check if it has been changed (the listeners would set a bloolean variable). For this to work, the navigation action needs to be handled by the bean too.
Frank -
The database structure has been modified - how to check if it happend?
Hello,
I have a question. How to check if the database structure has been modified? I know that there is shown a messagebox after creating table and adding some fields, but sometimes this message appear after some seconds. The problem is that I want to create table and UDO for this table, and until database structure is not modified I got an error message. If I wait and DB strucuture modifies then UDO is creating correctly.
My question is - does anyone know how to check if database structure has been modified?
Regards,
HmgHi Szymon,
I guess you are stuck up in a kinda scenario, where in, you will be populating a form with values, before the structure modifies, if this is going to be your problem, I can help you out with a work around.
In the beginning of the process, before the creation of the UDO or tables, set a boolean value to false, and once all UDO's and Tables are created, only then, should you make it true and only after the boolean becomes true, you should proceed with populating the values from the screen.
I really ament sure what your problem is, but one of my guys faced this problem, I then, thought even you might have a similar problem.
Satish. -
How to check if all values from a dataset has come to an internal table
How to check if all values from a dataset has come to an internal table ?
Hi,
After OPEN DATASET statement check if sy-subrc = 0 if its success then proceed with split statement and save the dataset values into a internal table and while debugging the internal table you will find that whether all values get into internal table.
Checking sy-subrc after OPEN DATASET statement is must to fill up the values in the internal table.
For e.g.
OPEN DATASET p_inpfile FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
WRITE :/ 'No such input file' .
EXIT.
ELSE.
READ DATASET p_inpfile INTO loc_string.
IF sy-subrc NE 0.
EXIT.
ELSE.
CLEAR loc2.
*Spliting fields in the file-
REPLACE ALL OCCURRENCES OF '#' IN wa_string WITH ' '.
SPLIT wa_string AT const INTO loc2-pernr
loc2-werks
loc2-persk
loc2-vdsk1.
Hope you get some idea.
Thanks,
Sakthi C -
How to Check the report is Finished while calling a report from Forms 6i
Dear All,
I am Calling a report from oracle forms 6i, after runing report in " Run_Product(REPORTS,:fn_cntl.nb_report_name,ASYNCHRONOUS, RUNTIME, FILESYSTEM,pl_id, NULL);"
I need to copy the pdf to store it in another place once the report is generated.
My Problem is : that i want ot Check first the report has generated after " Run_Product(REPORTS,:fn_cntl.nb_report_name,ASYNCHRONOUS, RUNTIME, FILESYSTEM,pl_id, NULL);" is executed ? How to check the report is generated ot not?
As i tried to use the below procedure after "Run_Product(REPORTS,:fn_cntl.nb_report_name,ASYNCHRONOUS, RUNTIME, FILESYSTEM,pl_id, NULL);"" but his does not work... nothing happens
{code}
PROCEDURE FPC_COPY_REPORT (p_report_name varchar2) IS
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status varchar2(20);
lv_id varchar2(1000);
BEGIN
repid := find_report_object('AMTP_995.RDF');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
if rep_status = 'FINISHED' then
message('Report Completed'); message('Report Completed');
else
message('Error when running report.'); message('Error when running report.');
end if;
END;
{code}
Any Helpactually My code is this:
declare
ln_alert number;
pl_id ParamList;
lv_report_name varchar2(10000);
lv_path varchar2 (100) := 'C:\';
lv_shared_path varchar2(1000);
lv_copy_file varchar2(10000);
cursor cr_dir_path IS
select v_dir_path
from md_directory
where v_dir_code ='SHR';
lv_file_name varchar2(1000);
BEGIN
open cr_dir_path;
fetch cr_dir_path into lv_shared_path;
close cr_dir_path;
lv_report_name := lv_path||:fn_cntl.nb_ref_no||'_M08600000_'||to_char(sysdate,'YYYYMMDD-HHmmss')||'.pdf';
if ffn_check_fields THEN
pl_id := Get_Parameter_List('LAI');
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List( pl_id );
END IF;
pl_id := Create_Parameter_List('LAI');
if :fn_cntl.nb_report_name ='MMAT_REPORT'
then
if :fn_cntl.nb_report_desc ='EXPORT'
then
Add_Parameter(pl_id, 'PARAMFORM',TEXT_PARAMETER, 'NO');
Add_Parameter(pl_id, 'DESTYPE', TEXT_PARAMETER,'File');
Add_Parameter(pl_id, 'DESNAME', TEXT_PARAMETER, lv_report_name);
Add_Parameter(pl_id, 'DESFORMAT',TEXT_PARAMETER,'PDF');
Add_Parameter(pl_id, 'p_mat_no',TEXT_PARAMETER, :fn_cntl.nb_mat_no);
Add_Parameter(pl_id, 'p_ref_no', TEXT_PARAMETER, :fn_cntl.nb_ref_no);
Add_Parameter(pl_id, 'p_verified_by',TEXT_PARAMETER, user);
Run_Product(REPORTS,:fn_cntl.nb_report_name,ASYNCHRONOUS, RUNTIME, FILESYSTEM,pl_id, NULL);
DECLARE
repid REPORT_OBJECT; v_rep VARCHAR2(100); rep_status varchar2(20);BEGIN
/* REP_OBJ= REPORT OBJECT CREATED UNDER REPORT NODE AT FORM */
repid := find_report_object('MMAT_REPORT'); v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
if rep_status = 'FINISHED' then
message('Report Completed'); message('Report Completed');
--copy_report_object_output(v_rep,'c:\local.pdf');
-- host('netscape c:\tlocal.pdf');
else message('Error when running report.');
message('Error when running report.');
end if;
END;
end if;
end if;
if :fn_cntl.nb_report_desc ='EXPORT'
then
error_handler('This report will be Storde in ' ||lv_report_name||' and '||lv_shared_path|| ' Location',3);
lv_copy_file :='copy '||' "'||lv_report_name||'" "'||lv_shared_path||'"';
host(lv_copy_file,no_screen);
error_handler('Report Has been Generated Sucessfully.',3);
end if;
end if;
END;I will try first the another solution you have replied perviously... and will let you no the results... thanks a lot... -
In ecatt - how to check at database level using ABAP
Hi,
How to check at database level using ABAP in Ecatt tool.
say,for example I want to check a particular sales order is invoiced or not ,at the database level and if it is invoiced I have stop proceeding to invoicing of that sales order number.
Could anybody suggest on this with an example?
thanks.Hi,
you can use the command GETTAB to access single db records.
Full specified or partitial specified keys can be use at GETTAB. It will return always only one record, also if a couple could match your selection.
For more advanced scenarios you can also use eCATTs Inline ABAP. In a block between the commands ABAP. ENDABAP. you can code ABAP statements, e.g. SELECT ... INTO TABLE ...
eCATT script parameters of type 'V' defined in that script using ABAP/ENDABAP will be transfered into the ABAP block and back to script after ABAP perform.
Best regards
Jens -
How to check lock status of field in current document?
Hi,
How to check the status of field in current document(master agreement), that is whether its locked or not.
I locked "Publish to Supplier" checkbox after MA is saved first time. Now, I want to check the status whether this field is locked or not in the same document.
IsLockOwner( ) is not returning the correct value. Its not giving the current document field lock status.
Is there any way to get current document field status?
Thanks,
SaloniHi,
If I understand correctly, your requirement is to get the value of this field "Publish to Supplier on". It can be achieved by writing the below:
isVendorVisible = doc.getExtensionField("VENDOR_VISIBLE").get();
Meaning, if the box is checked, it will return a value = true and if not then false.
Hope this helps,
Regards,
Vikram Shukla -
How to check F110 - automatic payment transaction
Dear gurus,
I had to execute the T-code F110 ("automatic payment transaction).
I'd like to check/verify if I have correctly entering the datas.
Is there a mean to check?
After throwing the proposal and the payment I have the following message : "Posting orders: 2 generated, 2 completed".
What does it mean?
How can I check/verify the recision of my enteries? Is there a transaction that I can execute to verify?
Thanks,
Regards,
gulHi
For the 'Red' Line item in F110, check the proposal log & the payment log for the details of the error message.
The error may be due to these common problems:
- Bank data not maintained properly
- Vendor master not updated for payment method or house bank
- house bank settings & FBZP configuration improper (go thro the FBZP settings fully for that payment code - house bank combination)
For the other open items in FBL1N which are not processed in F110, it may be due to the foll reasons:
- Either they are not due as on the date mentioned in F110
- Parameters enetered in F110 don't fufil those documents (like house bank, payment method, etc).
Regards
Srini -
How to check message Holding capacity in PI 7.1
Hi All,
How to check message holding capacity in PI 7.1
Thanks
DayakarHi Stefan,
I placed the SDA file in the JSPM inbox directory and the JSPM could not detect this file as hotfix. I am getting the following error, it looks like i need to use the Netweaver developer stuido to deploy the SDA files.
I am getting the following error even after placing the sda file in the respective directory.
No applicable development component(s) found for deployment in Inbox directory
sappn5\sapmnt\trans\EPS\in.
Thanks,
Srini
Edited by: srinivas kapu on Oct 7, 2008 6:57 AM -
How to check a pdf uploaded for press in a website automatically ??
how to check a pdf uploaded for press in a website automatically ??
i am making a new website for a printer.. his client upload pdf online directly in his website, we want that in the case that the pdf is not
as the printer need it for printing , the site automaticly after checking the pdf profile uploaded open a window and write what is wrong with this pdf
and if possible fix what he can fix automaticly as pitstop software is doing offline.
PLEASE YOUR HELP
thank you in advanceAcrobat isn't available with a server license. You might like to look into PitStop Server.
Maybe you are looking for
-
How can I make a while loop wait 10 seconds before iterations​?
I am using labview to for an osmosis system that measures the amout of water lost from the reading on a scale. I currently have the program displaying the data from 3 scales every second. I also need to calculate the flux through the membrane over
-
"Sorry, a serious error has occurred that requires Premiere to be shut down. We will attempt to save your current project" Yep, that one. I get it every time I open up Premiere. The error box reappears after a couple of seconds, then it keeps reapp
-
All the attachments both in SRM and R/3 must be saved in IXOS database
Dear all, I am having the following requirements: We are creating Shopping Cart in SRM with attachments and these attachments are saving in the IXOS database. All these (same attachments) are relpicating to R/3 whenever system generates PR or PO auto
-
XFCE opening folders in Firefox instead of Thunar
If I do something like select Dropbox's "Open Dropbox Folder" or choose to "Open containing folder" of a downloaded file in Chromium, Firefox starts up and displays the folder contents (as a directory listing). This is baffling for a number of reason
-
I get it off with google and then it reappears, I bring it back to factory specs,