How to check Server Shutdown and Startup History in SAP

Hi guru's . One of the background job failed on saturday. And i want check the duration and the history when the server shutdown and startup. I can check the server startup time at ST02 t-code. But i want to check the entire history of server shut down. Please guide me through. Thanks.

Dear Ram,
You can see the System logs in SM21 . Background job failure can be viewed in SM37 .
As said before go through \usr\sap\TST\DVEBMGS00\work directory and see the logs. Files like dev_disp , dev_ms ,dev_rfc.trc ,stderr1,stderr2,stderr3,stderr4 will have the log information . These files will have the information after the last system start .
Anyway if want to see the old logs before server shutdown , see the old logs in old files like dev_disp.old,dev_ms.old .
Regards,
Nibu

Similar Messages

How to check server hardware and OS issue without offline DB server

Hi Experts,
For checking hardware issue, do we have any way to check server hardware and OS performance without offline server?
any way we could rule out bad hardware causing the problem without offline server?
Thanks
Jim

I think your answer depends on the nature of the hardware issue you think you may be having, whose hardware you have, and the OS your are running on that hardware. Such as on UNIX there are several error logs that record errors related to the system including detected hardware issues and you have numerous utilities like vmstat and iostat that can be used to measure performance. Some disk units linclude their own diagnostics modules you can run.
If you really want help I think you have to be a lot more specific about the problem you are facing.
HTH -- Mark D Powell --

Different ways to shutdown and startup instance in 10g

I have just installed 10g on my win2003 server. There seems to be 3 different ways to shutdown / startup an instance in 10g.
1. via SQLPLUS (how its always been) with shutdown and startup commands
2. via the new OEM Web interface
3. Start / Stop the NT Service for the instance
questions:
- Did I miss anything other methods?
- how come OEM ask for O/S login as well as DB login, when shutdown or startup? but via SQLPLUS I only have to login using as DBA? different level of security?
- When shutdown via either SQLPLUS or OEM, the NT service is still shown as "started"? so does this mean that the NT service is more than the oracle instance???
Thanks
Clo

how come OEM ask for O/S login as well as DB loginWith SQL*Plus, you are already logged into the Operating System. There is a OS session in progress. With OEM web interface, it has to first start a OS session and then connect to Oracle using Oracle credentials supplied to actually shutdown the DB.
the NT service is still shown as "started"? The difference between NT service started or not started (given that the database was already shutdown) will be:
When NT service is started but the DB is shutdown, your users will get this error message:
Enter user-name: scott
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Enter user-name:When NT service is stopped, your users will get this error message:
Enter user-name: scott
Enter password:
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name:The NT service needs to be running for you to be able to do a STARTUP or SHUTDOWN on the database. You will NOT be able to STARTUP if the NT service was not running (STARTUP will not start your NT service automatically).

How are Windows Server Backup and Command Line Tools used in vCSHB installation?

How are Windows Server Backup and Command Line Tools used during the installation of vCSHB? Is it required in all types of deployments (PtoV, VtoV, PtoP)? Is it used to create the files that are put in the file share for the second node to use during vCSHB installation or is it only used during a vCSHB clone operation of a Physical to Physical deployment? Are these tools not used in some deployments?

You need Windows Server Backup installed on source and destination, and during the installation of vCSHB the installer will invoke the wbadmin (Windows Server Backup Utility) and will backup configuration and application data (application data is optimal but can decrease the sync time after installation of secondary node). On the secondary node you will need only run the vCSHB installer and everything will be restored.
Check this blog entry for some more info about some problems in P2P deployment: http://www.vcoportal.de/2013/12/vmware-vcenter-server-heartbeat-restore-on-a-second-node-a-journey/

Scan to Email Error Message "cannot connect to server. check server name and address"

I have a HP Officejet Pro 8600 Plus.
I've been using this printer for several months. Now am getting an ERROR message when I try to scan to email that it "cannot connect to server. check server name and address"
I'm not sure how to check this. We can all still print remotely via the internet connection.
Anyone have any ideas?

Thanks for the info.,
Did you recently change your operating system or network router that started to cause this error?
Check out this thread - http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/Configuring-quot-Scan-To-E-mail-quot-on-HP-...
You may also need to change the printer DNS settings manually - http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/HP-8500-Scan-to-Email-setup-cant-conne...
Thanks

How to check the memory and CPU usage on NPU

Hi expert ,
Could you tell me how to check the memory and cpu usage on NPU?
I think ASR1000 has this command (show platform hardware qfp active...) , but I coudn't find the same command on ASR9001.
I checked " show controllers np counters all" command, but I did not find it.
Platform: ASR9001
version: 4.3.2
NP: Tyhoon
Thanks,

Hi Kanako,
understand your question, but something like that doesnt exist for the trident/typhoon NPU's for the asr9k.
in fact cpu usage is not really applicable for parallel/serialized hardware forwarders, but mainly the KPI is here
the PPS it handles.
The max pps it can handle is dependent on feature set.
What you could do is measure the rates on the PARSE_FABRIC_RECEIVE count (packets received from fabric, so egress direction), PARSE_ENET_RECEIVE count (packets received from the interface to the fabric, so ingress) and the LOOPBACK count, that is packets that are recirculated for extra processing. The sum of these 3 gives an idea of the PPS rate the NPU is working on.
Memory consumption is something tricky also, there are many memories attached to the NPU, notably:
TCAM used for vlan matching, ACL and QOS matching
Search memory for L2 and L3 (shared on Trident, separated on Typhoon)
Frame memory for packet bufferin in QOS
Stats memory, for all kinds of counters of QOS maps, interface stats etc
their usage is rather dynamic also.
The few things you want to verify on these are:
- ACL usage (in terms of Tcam entries)
- MAC table size (2M max on typhoon)
- FIB size (4M max on typhoon)
frame memory is dependent on the buffering, which is a sum of all the packets instant queue length and size of all pmaps attached to interfaces served by the same NPU. there is no good overview as to how much you have available of that, but it has a rather significant size 1G or 2G depending on the TR or SE cards (typhoon specific).
regards
xander
Xander Thuijs CCIE #6775
Principal Engineer
ASR9000, CRS, NCS6000 & IOS-XR

I'm unable to clear my search history after many attempts with the firefox instructions as I'm unable to check the "Form and Search History" box for some reason

I've tried several times to clear my search history without any success. I've been able to do so in the past, but this is the first time I've tried in a while and for some reason it will not let me check the box for "Form and Search History." Then sometimes it will let me check that box, but when I click "ok" to apply the clearing of the search history, nothing happens and it still remembers all my sites. At that point I try to clear it again and its back to not letting me check the "Form and Search history" box (I've gone through this cycle a few times). I tried looking through some of suggested articles that Firefox sent me too, but I don't know much about computers and just doing the things they seem talking about isn't working either. Please help, thanks!

It seems to have worked itself out. Thanks anyway!

How do SQL server 2000 and Oracle linked?

Hi,
How do SQL server 2000 and Oracle linked?
Thanks in Advance
Baloch.

use the like to setup ODBC and datasource
http://www.databasejournal.com/features/oracle/article.php/3442661/Making-a-Connection-from-Oracle-to-SQL-Server.htm
and then create link server in sql server after you test conenction with oracle

How to check the BW and BIA systems are up and working fine.

Hi friends,
how to check the BW and BIA systems are up and working fine. And also what is ICM, how to check whether it is working properly or not.
ANd what is name resolution and IP , how to check whether this is running fine.
regards, balu.

Hi,
you can use process monitoring or the alert function in the standalone TREXAdmin tool.
ICM:
http://help.sap.com/saphelp_nw04/helpdata/EN/0a/a7903febb15a7be10000000a11405a/content.htm
name resolution
http://en.wikipedia.org/wiki/Domain_Name_System
IP:
http://en.wikipedia.org/wiki/IP
Please also have a look at the transactions TREXADMIN and RSDDBIAMON2.
I think it´s better if you use the forum search and google/wikipedia before you ask such questions.
Best Regards,
Jens

How to check Server availability status in jsf?

how to check Server availability status in jsf ?

Do "something" that would cause the server to respond; fetch a webpage, call a webservice, whatever. If it doesn't work the server isn't there, or is in a broken state.

How to determine server host and server port

Dear Experts.
How to determine server host and server port where Webdynpro application is working.
If the url is following
http://sapr3dm:50500/webdynpro/dispatcher/local/ForecastingPowerProject2/NewObjectConnection?SAPtestId=6
How to receive sapr3dm and 50500

Hi,
May be of use
WDProtocolAdapter.getProtocolAdapter().getRequestObject().getServerName();
WDProtocolAdapter.getProtocolAdapter().getRequestObject().getServerPort();
Regards
Ayyapparaj

How to import seeburger adapter and mdm adapter in sap pi 7.3

Hi all,
how to import seeburger adapter and mdm adapter in sap pi 7.3

Hello
To import the Seeburger adapters, follow the instructions in the Master Installation guide and the individual guides for each of the adapters. These are available with the Seeburger software downloads.
Regarding the MDM adapter, this is the wrong forum for that question. Try the MDM forum (but first, try searching the forum as this is a very basic question).
Regards
Mark

How to shutdown and startup oracle 11g R1 from dbcontrol (EM)?

Dear All,
I have already installed oracle 11g R1. The database is running smooth including the dbcontrol / EM.
I have difficulty in shutdown and restart database from EM.
How to set EM, so that I can start and shutdown the database from EM?

Hi,
If you are in windows, this is a very common problem.
You can try setting the logon as batch job to the OS user from local security policy
1.Go Control Panel, Administrative Tools.
2. Click on Local Security Policy.
3. Local Policies, User Rights Assignment.
4. Double click, 'Log on as a batch job'
Here provide username along with domain name like co.uk\foo
Regards

What is the correct order to shutdown and startup RAC system

anyone please take a look if my order of shutdown and restart is correct.
This is two node RAC,
1) srvctl stop database -d db_unique_name
2)srvctl stop nodeapps -n node1
3)srvctl stop nodeapps -n node2
4)srvctl stop asm -n rac1
5)srvctl stop asm -n rac2
6)srvctl stop listener -n rac1
7)srvctl stop listener -n rac2
8) crsctl stop cluster all
when I restart RAC, use
1)crsctl start cluster all
2)srvctl start listener -n rac1
3)srvctl start listener -n rac2
4)srvctl start asm -n rac1
5)srvctl start asm -n rac2
6)srvctl start nodeapps -n node1
7)srvctl start nodeapps -n node2
8)srvctl start database -d db_unique_name

Hi,
1.) I would specify -o immediate. Otherwise your stop of the database can take quite a while.
2.) Actually nothing else (except the database) needs a clean shutdown. I would simply stop the cluster than with crsctl stop cluster all.
4.) Also note if you have Voting and OCR in ASM this step won't be successfull (since it can't stop ASM as long as the cluster is running).
8.) Note that crsctl stop cluster will leave the OHASD running (and also some other processes, check with crsctl stat res -t -init).
If you need to really stop everything you have to execute crsctl stop crs on each node (they are not clusterwide).
Startup:
CRSCTL start CLUSTER ALL should actually bring a lot of things up... but this depends also on what has been stopped (since this is recorded in the OCR).
But at least ASM and listener should startup automatically (even if they were stopped before).
So normally it is enough to start the database. But I would not start the database, I would startup the services (which the database services). Because this will bring up the database.
Otherwise you might end up with a running database, but with no active services.
Regards
Sebastian

How to check IGS version and procedure for upgrading IGS patch level

Hi all,
We are on BIW 3.5 .Iam not clear about how to check the version of IGS and its patch level .I went through various notes but still iam confused with tracing it , can someone plz help out?
Secondly want to upgrade IGS version i went through note 454042 but still confused with doing that , Can someone plz refer other notes or detailed procedure for upgrading IGS.
Our BIW Production and Test are on AIX and Development is on HP-Unix OS .
Points guaranteed for the same. Requested to revert at earliest as this is urgent .
Regards,
Saumya

Hi,
Check this link which may help u:
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/igs-upgrade-1455477
The installation/upgrade procedures for the integrated IGS are as follows:
Integrated Version Installation
The integrated IGS is automatically installed with the SAP Web Application Server.
Integrated Version Upgrade
You find the upgrade files for the integrated IGS version on the SAP Service Marketplace:
http://service.sap.com/swdc ® Download ® Support Packages and Patches ® Entry by ApplicationGroup ® SAP Frontend Components ® SAP IGS ® SAP IGS .
There, you find the IGS executables and libraries (igsexe_.sar) as well as the IGS folder structure (igshelper_.sar) containing among others font files.
With the upgrade files of the executables and libraries, proceed exactly like you would with kernel patches (for example, extract the Archive to the same location). More information about kernel patches can be found in the related note 19466 in the section Copying and Installing a Patch.
The upgrade files for the IGS folder structure must be extracted to the instance directory (DIR_INSTANCE). More information can be found in note 1028690.
After a restart of the Web AS the new IGS is up and running.
Information about finding out your IGS patch level is provided in note 931900.
For an upgrade of an integrated IGS please also check note 896400.
For more info check this SAP Help doc:
http://help.sap.com/saphelp_nw04s/helpdata/en/4b/72d43ac66e1f08e10000000a114084/frameset.htm
Hope these helps u...
Regards,
KK.

How to check Server Shutdown and Startup History in SAP

Similar Messages

Maybe you are looking for