How to check Temp/Power supply status like V210 in T2000

Hi
As I would like to know what is the command to check the Power Supply Status/Temp Status like V210 in T2000. I tried with /usr/platform/sun4v/sbin/prtdiag v command like V210 but it disaplys only below details.
System Configuration: Sun Microsystems sun4v Sun Fire T200
System clock frequency: 200 MHz
Memory size: 8184 Megabytes
================================ Virtual CPUs ================================
CPU ID Frequency Implementation Status
0 1000 MHz SUNW,UltraSPARC-T1 on-line
1 1000 MHz SUNW,UltraSPARC-T1 on-line
2 1000 MHz SUNW,UltraSPARC-T1 on-line
3 1000 MHz SUNW,UltraSPARC-T1 on-line
4 1000 MHz SUNW,UltraSPARC-T1 on-line
5 1000 MHz SUNW,UltraSPARC-T1 on-line
6 1000 MHz SUNW,UltraSPARC-T1 on-line
7 1000 MHz SUNW,UltraSPARC-T1 on-line
8 1000 MHz SUNW,UltraSPARC-T1 on-line
9 1000 MHz SUNW,UltraSPARC-T1 on-line
10 1000 MHz SUNW,UltraSPARC-T1 on-line
11 1000 MHz SUNW,UltraSPARC-T1 on-line
12 1000 MHz SUNW,UltraSPARC-T1 on-line
13 1000 MHz SUNW,UltraSPARC-T1 on-line
14 1000 MHz SUNW,UltraSPARC-T1 on-line
15 1000 MHz SUNW,UltraSPARC-T1 on-line
========================= IO Configuration =========================
IO
Location Type Slot Path Name Model
IOBD/NET0 PCIE IOBD /pci@780/pci@0/pci@1/network@0 network-pciex8086,105e
IOBD/NET1 PCIE IOBD /pci@780/pci@0/pci@1/network@0,1 network-pciex8086,105e
IOBD/PCIE PCIE IOBD /pci@780/pci@0/pci@9/scsi@0 scsi-pciex1000,56 LSI,1064E
IOBD/NET2 PCIE IOBD /pci@7c0/pci@0/pci@2/network@0 network-pciex8086,105e
IOBD/NET3 PCIE IOBD /pci@7c0/pci@0/pci@2/network@0,1 network-pciex8086,105e
IOBD/PCIE1 PCIE 1 /pci@7c0/pci@0/pci@8/network@0 network-pciex108e,abcd SUNW,pcie+
IOBD/PCIE1 PCIE 1 /pci@7c0/pci@0/pci@8/network@0,1 network-pciex108e,abcd SUNW,pcie+
IOBD/PCIE1 PCIE 1 /pci@7c0/pci@0/pci@8/network@0,2 network-pciex108e,abcd SUNW,pcie+
IOBD/PCIE1 PCIE 1 /pci@7c0/pci@0/pci@8/network@0,3 network-pciex108e,abcd SUNW,pcie+
IOBD/PCIX PCIX IOBD /pci@7c0/pci@0/pci@1/pci@0/isa@2 isa
IOBD/PCIX PCIX IOBD /pci@7c0/pci@0/pci@1/pci@0/usb@5 usb-pciclass,0c0310
IOBD/PCIX PCIX IOBD /pci@7c0/pci@0/pci@1/pci@0/usb@6 usb-pciclass,0c0310
IOBD/PCIX PCIX IOBD /pci@7c0/pci@0/pci@1/pci@0/ide@8 ide-pci10b9,5229
========================= HW Revisions =======================================
System PROM revisions:
OBP 4.25.12 2008/03/23 13:27
IO ASIC revisions:
Location Path Device Revision
IOBD/SAS-SATA-HBA /pci@780 SUNW,sun4v-pci 0
IOBD/SAS-SATA-HBA /pci@780/pci@0 pciex10b5,8532.bc 188
IOBD/SAS-SATA-HBA /pci@780/pci@0/pci@9 pciex10b5,8532.bc 188
IOBD/IO-BRIDGE /pci@7c0 SUNW,sun4v-pci 0
IOBD/PCI-SWITCH1 /pci@7c0/pci@0 pciex10b5,8532.bc 188
IOBD/PCI-BRIDGE /pci@7c0/pci@0/pci@1/pci@0,2 pciex8086,341.9 9
IOBD/GBE0 /pci@780/pci@0/pci@1/network@0 pciex8086,105e.108e.105e.6 6
IOBD/GBE0 /pci@780/pci@0/pci@1/network@0,1 pciex8086,105e.108e.105e.6 6
IOBD/GBE1 /pci@7c0/pci@0/pci@2/network@0 pciex8086,105e.108e.105e.6 6
IOBD/GBE1 /pci@7c0/pci@0/pci@2/network@0,1 pciex8086,105e.108e.105e.6 6
IOBD/SAS-SATA-HBA /pci@780/pci@0/pci@9/scsi@0 pciex1000,56.1000.1000.2 2
I am interested in getting the same o/p which also gives status on Fan Status/Power Supplies etc.
Please let me know do we need to upgrdae the OBP Version else ?
Thanks
Rajan

Hi
In thee same ref. I would like to know the comand from OS/Bash prompt so that I can write the script in which it will compare the values and alert me accordingly.
In case sc> prompt there is commnand "show environment" which give all details.
Thanks
Rajan

Similar Messages

How to check the power supply? iMac G3 233

How to do it?
Can i just take the case with the mainboard out and "short" the pins Power on (pin 8) with GND and check the voltages on the connector that comes out of the monitor case?
I know that the pin 8 is the power from articles about imac>atx case conversion.And i know that you can power up a normal ATX power supply by shortening two pins, and want to know if i can do the same with iMAc power supply. I don't want to fry anything.

Sounds like you have eliminated most of the possibilities, other than power supply board or motherboard. But it may also be the CPU daughter card that is faulty. I had one (233 MHz) that would run Mac OS 9 just fine, but it was unable to run Mac OS X reliably (crashes and freezes after a few minutes). I replaced it first with a 333 MHz G3 card off of eBay and later with a 467 MHz G4 card from the Fastmac booth at MacWorld San Francisco two years ago.
If you are comfortable disassembling the iMac to the point of removing the power supply board, you can layout the PS board and the carrier assembly (the thing you pull out with the motherboard, CPU card, and drives) on a table top. Then connect the power supply board to the carrier assembly, and connect the external power cord plug to the power supply board, and connect a keyboard with a power button to the carrier.
To measure the voltages, you can disconnect the 4-pin connector to the hard drive. If you turn it on using the power button on the keyboard, it will not start up with the hard drive not powered up (unless you use a bootable CD), but the system should be powered so that you can take your measurements.
Hope that works. Be careful with the exposed back end of the CRT. Keep any curious cats out of the room while you do this...
In case you don't have the PDF of the tray-loader iMac tech manual, it is downloadable here.
http://www.baconeggs.co.uk/manuals/index.htm

ASA 5512 - monitor power supply status via snmp oid

Device – ASA 5512 running 9.1(1).
Show version:
ASA-1# sh ver
Cisco Adaptive Security Appliance Software Version 9.1(1)
Device Manager Version 6.6(1)
Compiled on Wed 28-Nov-12 11:15 PST by builders
System image file is "disk0:/asa911-smp-k8.bin"
Config file at boot was "startup-config"
ASA-1 up 8 hours 38 mins
Hardware:   ASA5512-K7, 4096 MB RAM, CPU Clarkdale 2792 MHz, 1 CPU (2 cores)
            ASA: 2048 MB RAM, 1 CPU (1 core)
Internal ATA Compact Flash, 4096MB
BIOS Flash MX25L6445E @ 0xffbb0000, 8192KB
Issue: looking for a snmp OID to poll power supply status (Inbuilt Power Supply - no redundant power supply in this scenario). Possibly what we see in show environment.
CSE analysis:
I tried using the OIDs belonging to CISCO-ENTITY-FRU-CONTROL-MIB , like cefcFRUPowerOperStatus and cefcFRUPowerAdminStatus but it didn’t return anything.
NOTE: I have done all the snmp walks from the Linux server. Do I doubt it’s something to do from the snmp manager side.
Couple of observations. The CISCO-ENTITY-FRU-CONTROL-MIB talks about the field replaceable power supplies, so I doubt if it’s going to return the value for inbuilt power supply.
Second, I noticed that there are snmp traps supported for power supply and threshold setting. See configuration below. Is it that only traps works for power supply and environment related details?
Snmpwalk on cefcFRUPowerStatusEntry returns nothing:
[root@tonbenso-eagle bin]# ./snmpwalk -v2c -c public 172.16.169.29 1.3.6.1.4.1.9.9.117.1.1.2.1
SNMPv2-SMI::enterprises.9.9.117.1.1.2.1 = No Such Object available on this agent at this OID
Snmpwalk on cefcFRUPowerOperStatus returns nothing:
[root@tonbenso-eagle bin]# ./snmpwalk -v2c -c public 172.16.169.29 1.3.6.1.4.1.9.9.117.1.1.2.1.2
SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.2 = No Such Instance currently exists at this OID
Snmpwalk on cefcFRUPowerAdminStatus returns nothing:
[root@tonbenso-eagle bin]# ./snmpwalk -v2c -c public 172.16.169.29 1.3.6.1.4.1.9.9.117.1.1.2.1.1
SNMPv2-SMI::enterprises.9.9.117.1.1.2.1.1 = No Such Instance currently exists at this OID
[root@tonbenso-eagle bin]#
login as: root
I tried polling the ciscoEntityFRUControlMIB to see what all values it return. It just returned enterprises.9.9.117.1.3.1.0 = INTEGER: 2. Meaning cefcMIBEnableStatusNotification is FALSE (value 2). Meaning cefcModuleStatusChange, cefcPowerStatusChange, cefcFRUInserted, cefcFRURemoved, cefcUnrecognizedFRU and cefcFanTrayStatusChange are prevented from being sent.
Snmpwalk on ciscoEntityFRUControlMIB
[1]+ Stopped                 ./snmpwalk -v2c -c public 172.16.169.29
[root@tonbenso-eagle bin]# ./snmpwalk -v2c -c public 172.16.169.29 1.3.6.1.4.1.9.9.117
SNMPv2-SMI::enterprises.9.9.117.1.3.1.0 = INTEGER: 2
Object
cefcMIBEnableStatusNotification
OID
1.3.6.1.4.1.9.9.117.1.3.1
Type
TruthValue
Permission
read-write
Status
current
MIB
CISCO-ENTITY-FRU-CONTROL-MIB ; - View Supporting Images
Description
"This variable indicates whether the system
produces the following notifications:
cefcModuleStatusChange, cefcPowerStatusChange,
cefcFRUInserted, cefcFRURemoved,
cefcUnrecognizedFRU and cefcFanTrayStatusChange.
A false value will prevent these notifications
from being generated."
Found couple of bugs:
CSCty32558 – but then this is for 5585 and I see it is fixed in 8.4
CSCul90037 – New state
Show snmp-server oidlist:
http://www-tac.cisco.com/Teams/ks/c3/getLargeFile.php?srId=632222409&fileName=20141030-013905_ASA-show-snmp-server-oidlist.txt
Show tech:
Sh run | in snmp:
ASA-1# sh run | in snmp
snmp-server host asa 172.18.123.228 community *****
no snmp-server location
no snmp-server contact
snmp-server community *****
snmp-server enable traps entity power-supply-presence power-supply-temperature -----à I was talking about this trap above
any help will be appreciated.

Hi
I've got an ASA with redundant power supplies. An ASA5585. So I have the need to monitor them. :-) So how can we do it?
Also I've made a SNMP-Walk through the ASA v8.4(2)8 and it doesn't show up any ENV-MIB values. The
1.3.6.1.4.1.9.9.13 tree is not available. Are you shure it's available on the ASA?
Funny is also that the command "show snmp-server oidlist" from the 8.4 configuration guide is not available on the real CLI. I think the documentation guys were faster than the coders. ;-)
Kind regards
Roberto

Use SNMP to monitor the power supply status of stacked switches

Does anybody know how to use SNMP to monitor the status of the internal power supplies of a group of stacked Cisco 3750 switches?
The switch stack has three 3750-48PS-E switches inter-connected by Cisco StackWise cable. IOS ver 12.1(19)EAlc. A single IP address is used to identify the switch stack. Every time I poll the OID chassisPs1Status (1.3.6.1.4.1.9.5.1.2.4.0 in CISCO-STACK-MIB), I only got the status for the Master switch of the switch stack. Is there any way to poll the power supply status of other switches in the switch stack?
Thanks a lot!

Sorry to refresh such an old topic - but I am stuck with exactly this: Monitoring power supplies of a stacked Cisco Catalyst 3750-E.
I'm using the exact same OID's as described, but the problem is, the information shown on the SNMP output is not correct.
This morning, a power supply of the first switch failed and switched to RPS. Here the information I got on SNMP:
snmpwalk -v 2c -c public 192.168.1.50 1.3.6.1.4.1.9.9.13.1
SNMPv2-SMI::enterprises.9.9.13.1.1.0 = INTEGER: 13
SNMPv2-SMI::enterprises.9.9.13.1.3.1.2.1006 = STRING: "SW#1, Sensor#1, GREEN "
SNMPv2-SMI::enterprises.9.9.13.1.3.1.2.2006 = STRING: "SW#2, Sensor#1, GREEN "
SNMPv2-SMI::enterprises.9.9.13.1.3.1.3.1006 = Gauge32: 41
SNMPv2-SMI::enterprises.9.9.13.1.3.1.3.2006 = Gauge32: 40
SNMPv2-SMI::enterprises.9.9.13.1.3.1.4.1006 = INTEGER: 59
SNMPv2-SMI::enterprises.9.9.13.1.3.1.4.2006 = INTEGER: 59
SNMPv2-SMI::enterprises.9.9.13.1.3.1.5.1006 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.13.1.3.1.5.2006 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.13.1.3.1.6.1006 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.13.1.3.1.6.2006 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.13.1.4.1.2.1060 = STRING: "Switch#1, Fan#1"
SNMPv2-SMI::enterprises.9.9.13.1.4.1.2.2059 = STRING: "Switch#2, Fan#1"
SNMPv2-SMI::enterprises.9.9.13.1.4.1.3.1060 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.13.1.4.1.3.2059 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.13.1.5.1.2.1059 = STRING: "Sw1, PS1 Normal, RPS NotExist"
SNMPv2-SMI::enterprises.9.9.13.1.5.1.2.2060 = STRING: "Sw2, PS1 Normal, RPS NotExist"
SNMPv2-SMI::enterprises.9.9.13.1.5.1.3.1059 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.13.1.5.1.3.2060 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.13.1.5.1.4.1059 = INTEGER: 2
SNMPv2-SMI::enterprises.9.9.13.1.5.1.4.2060 = INTEGER: 2
As you see, both PS1 (for both switches) are appearing normal. It doesn't even recognize RPS:
SNMPv2-SMI::enterprises.9.9.13.1.5.1.2.1059 = STRING: "Sw1, PS1 Normal, RPS NotExist"
SNMPv2-SMI::enterprises.9.9.13.1.5.1.2.2060 = STRING: "Sw2, PS1 Normal, RPS NotExist"
The first switch's power supply died and now the cable is disconnected. LED's of the power supply are out. And still: The switch happily announces by SNMP it's power supplies are up.
Is this a known bug? If yes, has it been fixed?
Model WS-C3750E-48TD
Firmware 12.2(37)SE1
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}

Power Supply Status Changed

A while back our Xserve G5 went on UPS power for a few seconds. No big deal just a power blip.
Since then we get a "Power Supply Status Changed" message in the server log ever 12 seconds. I can't get it to go away. Server has been rebooted multiple times.
The OS Version is 10.4.1
Everything is functioning normally and there are no power problems. How do I stop this message?

We are also using the APC. Not sure which model, but we are also getting the same messages. We disconnected the cable early last week and the message is still going. We have been investigating all logs on our server for another problem which is where the server just stops being available on the network. To fix requires a restart using the power button to turn if off and then on again.
Then all is normal except for the "Power Supply Status Changed" error.
So far this is the only error we get that shows a problem exists.
Is anyone else also having the lockup problem?
X Serve G5 Mac OS X (10.4.3) RAID

How to check Internal, Concurrent Manager status in Oracle Apps R12 from fr

Step by step how to check Internal, Concurrent Manager status in Oracle Apps R12 from front end and how to start them.

Richa wrote:
Step by step how to check Internal, Concurrent Manager status in Oracle Apps R12 from front end Concurrent Processing - Concurrent Manager Generic Platform Questions and Answers [ID 105133.1]
and how to start them1) Using adcmctl.sh (from the backend)
2) Using Activate button (from the front-end) -- http://docs.oracle.com/cd/E18727_01/doc.121/e12893/T174296T174302.htm#4334248
Thanks,
Hussein

Power Supply Status Changed - every 12 seconds

Server Monitor shows all green for all components, but the log shows a red message every 12 seconds "Power Supply Status Changed". The power is coming through an APC UPS device, which also appears to be working fine. Any ideas?
Xserve G5 Dual Mac OS X (10.4.5)

Last night I got an Email:
Subject: Server Problem Notification
A problem has been detected on this server.
============================================================
Status Summary
Reason(s) for notification:
Power
Server:
Host : geekho
Model : RackMac3,1
Uptime : 17952 minutes
OS version : Mac OS X Server 10.4.6 (8I127)
Processor : 1 x 2000 MHz
Memory : 2048 MB
BootROM : $0005.17f2
Serial : QP6170FQSLX
Memory:
Memory Slot "DIMM0/J11" : 1024MB, ECC DDR SDRAM, PC3200U-30330
Memory Slot "DIMM1/J12" : 1024MB, ECC DDR SDRAM, PC3200U-30330
Drives:
Drive 1 (disk0) : Normal
Drive 2 (disk1) : Normal
Network:
en0 ( active) : Normal
Sensors:
CPU 1 Power : 12.55 watts
1.5v : 1.49 volts
3.3v Trickle : 3.30 volts
5v : 5.04 volts
12v Trickle : 12.06 volts
1.2v : 1.18 volts
Behind the DIMMs : 52.00 C
1.8v : 1.80 volts
System Bus IO VDD : 1.46 volts
PCI Slots : 45.00 C
DDR IO : 2.63 volts
DDR IO Sleep : 2.63 volts
3.3v : 3.30 volts
3.3v Sleep : 3.28 volts
5v Sleep : 5.07 volts
12v : 12.00 volts
System Controller Vcore : 1.71 volts
1.5v Sleep : 1.51 volts
1.2v Sleep : 1.18 volts
Between the Processors : 34.00 C
CPU 1 Internal : 46.02 C
CPU 1 12v : 0.94 amps
CPU 1 Vcore : 1.27 volts
CPU 1 Core : 9.89 amps
System Controller Internal : 55.75 C
CPU 1 Ambient : 38.00 C
System Controller Ambient : 44.00 C
CPU 1 Inlet : 30.00 C
CPU 2 Inlet : 27.50 C
Controls:
CPU A1 : 3973 RPMs
CPU A2 : 3988 RPMs
CPU A3 : 4002 RPMs
CPU B1 : 3992 RPMs
CPU B2 : 4017 RPMs
CPU B3 : 3982 RPMs
System Controller : 5585 RPMs
PCI Slot : 3890 RPMs
Clock Slew :
Security:
Enclosure Intrusion : No
============================================================
I don't see anything wrong (CPU power?), and the Server Monitor app shows all green lights and everything "Normal" except CPU Core amps at 7 amps peaking to 10.25 or so, which it calls "High".
What (if anything) is wrong, and what (if anything) should/could I do to fix it? Is this related to the original problem?
Thanks!

Display the power supply status in the IPS 4270

How to display the status of the power supply on the IPS 4270
since the IPS has two power supplies and one has failed, so i want to check what is causing this failure (i am looking for a message from the CLI describing that the IPS power were failed).

At this time, there is no method to display the status of the power supply from the CLI or IDM GUI of the IPS-4270. There is an open enhancement request to have this capability added in a future release of the IPS software.
Scott

How big of a power supply should I get? / ram question

Here's what I have
K7T266 Pro2-RU motherboard
Radeon 9800 pro
2 40gb hd's raided
1 20gb hd
cd burner
dvd drive
Audiophile sound card (forgot the model #)
and i'll soon have either 512 or 1024 of kingston hyper x pc2700 ram
right now my power supply is 300w and i'm pretty sure that's not good enough.
when i install the new ram, i'm also gonna install a new power supply. how many w should it be, and any recommendations on brands to get?

When I look for any part I always try to find the best deal, price/performance.
Are you in the UK?
I have the JSP sprite PSU 550W and I would recommend it to anyone.
Its a 550w PSU, the make is JSP.
http://www.jsp-tech.com/_english/2_products/2_detail.php?hMainTypeID=2&hSubTypeID=18&hProdID=50&PHPSESSID=e4f8f8d95cf38d9bd897cc82fb12a7ae
It cost me £26 on a special deal from http://www.aria.co.uk
Now look carefully at this PSU and tell me, does it look like the Levicom one.
http://www.aria.co.uk/ProductInfoComm.asp?ID=9628
http://www.aria.co.uk/ProductInfoComm.asp?ID=8823
they look the same, now have a look on levicom's website,
http://www.shopweezle-hosting.de/shop_levicom/login.php?caller=xlink&url=detail.php&sess=b4c1e20279ad56ad193ed0d344f76cd7&art_id=16&oldcaller=nav&startlimit=0&abt=8&itemgr=16
and finally pictures of my psu
http://www.holisticaroma.com/jsp.JPG
http://www.holisticaroma.com/jsp2.JPG

Mac Pro won't start up. What's the best way to check the power supply?

Hello. I'm having a severe problem with my 2007 Mac Pro. The symptoms are very easy to describe. The computer apparently shut itself off overnight, and when I press the power button to turn it on, absolutely nothing happens. No lights, no chime, no signs of any power whatsoever in the computer. I have never had major problems with the computer before. (Although I had recently noticed some minor skipping problems with streaming videos and Firefox had started hanging occasionally.)
So far, I have checked the power cable and the power outlet. I have also reset the SMC (holding in the Power button for 5 seconds with the unit unplugged). I am unable to see any light in the diagnostic LEDs (including LED 1) when I press the DIAG_LED button on the logic board.
While I welcome other suggestions, all I can figure is that this is either a power supply problem or a major logic board failure, but I don't know which. I have a multimeter and would like to test very directly if the power supply is the problem, because they are very expensive and obviously I do not want to order a replacement supply if it would not fix the computer. Does anyone know what the best way to test the supply directly is? What pins on what cable should I test, and what voltage should I look for?
Also: No the computer is not under any warranty. If at all possible, I would like to fix this myself. Thanks for any help you can give.

Well, I may have found the answer to my question as to why replacing the fuse dows not seem to be encouraged. I cut out the failed fuse (fast fuse, ceramic, 16 Amp 250V), and replaced it with another that was as close to it in spec as I could find (15 A instead of 16). Then I put the supply back in the case.
When I tried to plug it in, I got an immediate spark, followed by an acrid smell from the power supply. Later inspection revealed that the new fuse blew, as did another component nearby (not sure what it was) where I could see blackening and the smell was concentrated. At this point, I would consider myself lucky if the power supply didn't take anything else on the computer out with it.
Lesson learned; will try a new power supply and go from there.

How to change the power supply to the CD/DVD Drive so that it is off by default?

When running on battery I often use the "Safely Remove Hardware" icon from XP to "unplug" the Mat****a CD/DVD drive in order to safe some battery life.(Does it?) I use Fn+Tab to bring it back to life. I wonder if there is a way to make my Notebook (M400) boot with the power supply to the Drive off by default. By the way, any idea where I can find the extra battery for the CD/DVD-Drive slot and at which price?
Thanks in advance for your help.

Hello Robert
If you check start page you will see that this support forum is not any kind of Toshiba support directly but user-to-user forum. But you are not alone and many users expect that some Toshiba support team sit in the office and wait to write answers.
Anyway there are many Toshiba notebook users with very good knowledge and also enthusiasts who try to help other guys with different issues and also share own experience.
Professionalism is not forum but action when you need assistance because of hardware damage or something similar. If you need competent answers and help every authorized service partner should be able to give you info you need. But please dont mix service partner and Toshiba because it is not the same.
Anyway I have found info that you can use additional (second expansion battery) and it should be batteries with part numbers PA3510U-1BAL and PA3510U-1BRL. I can not tell you how much it costs but you can find it alone using Google.
Back to your first question: If I am understand you right you want to save more power and because of that you want to disconnect ODD. It is nice idea but you have obviously misunderstood something. "Safely Remove Hardware option is there to help operating system and say this hardware part will be removed and dont exist anymore but it does not mean physically disconnection from other hardware.
If you need more power use second battery and enjoy your life.
If you have more questions you are welcome. Many users here have M400 and I hope in the future some of them will participate a little bit more.
Have a nice day! :)

How to recognize fake power supply for iPhone?

Hello,
last year in August I purchased at Amazon a "original" power supply plus USB-Cable for my iPhone 3GS. Now this thing sometimes works and sometimes it doesn´t. I called the vendor but he sees no responsibility for the artivle because it is out of warranty.
I told him that to me (and by comparing with other Apple-Hardware) the article looks pretty fake and therefore it does not matter if it is out of warranty or not - he sold fake hardware with "original" labeling on it.
Now I would like to verify my guess and see if this thing is fake or not. Do you have any idea how I can do this or what I should do now?
Thank you
kcn

To some extent it depends where the OP lives. In the UK and the EU warranties are expected to be for two years (though Apple still advertises one year). There are however, different definitions about what a manufacturing fault is.
Apple (United Kingdom) - Legal - Apple Products and EU-wide Consumer Laws

How to create ground+ power supply in ultiboadr 13v

hi
anyone can help me... iam fresh in using this program .. ineed to put ground and power supply in my cricuit in ultiboad version 13 ?how?
and how can i export the file in to gerber file?
thanks all
plz help me

This is the LabVIEW board. You want to post to the Circuit Design Suite board for Multisimv questions.
http://forums.ni.com/t5/Circuit-Design-Suite/bd-p/370

How to control HV power supply (0-5V control voltage)?

Hey there,
I (LV newbie) wonder how to control my DELTA ELEKTRONIKA Powersupply with Labview. The control interface is a 0-5V analog input to set the power supply's output current.
Also I want to get some feedback of the set power supply current from an second (GPIB-controlled) instrument.
So how do I have to program a closed loop contol (application is not time critical), cause it would be mixed up of controlling by analog out (0-5V) and feedback loop driven on the GPIB-Card?
For a first step a simple control loop to set the current and monitor it on an analog input would also be an assistance .
THX for anyone helping

Look in the example finder for DAQmx functions for analog input and analog output.

How to read the power and status LEDs on cFP2020

Can the cFP2020 Power and Status LEDs be monitored by a host program? Also, can the Power and Ready LEDs be monitored from the other cFP Modules?

You can not directly read the Network Module Power or Status LED from a host program. Likewise, you can not directly read the Power and Ready LED of an IO module.
However, even though you can not directly ready the LED status, there are ways of finding out most of the information that the LEDs convey.
For the Network Module Power LED, you can infer the status of the Power LED by looking at the channel status for any/all items that are on the bank. If the items have errors indicating that a communication timeout has occured or an addressed item does not exist, then it is probable that the unit is offline (either because of no power or a fault). The Status LED indicates the current operating status of the Network module and in most cases, if it is flashing
, then a fault has occured that shutdown the processor. In most cases, you will not be able to determine that the Status LED is flashing, as the Status LED indicates a fault condition which will put the unit into a non-standard operating mode (e.g. firmware corruption, unassigned IP Address, or an OS fault).
For the IO modules, each channel on a module can report status, and based upon the status you can infer the state of the LEDs. If the module does not have the Power LED lit, the most likely status will be "Addressed item does not exist". If the module has the Power LED but no Ready LED, then the status will indicate that the "item is unconfigured". If the module has both a Power and Ready LED, than the channel should report either a good status, or a channel specific error (if applicable).
Regards,
Aaron

How to check Temp/Power supply status like V210 in T2000

Similar Messages

Maybe you are looking for