How to check that a time machine backup is ready for use?

Two of us share a time capsule via ethernet.
One machine has died and will need to be restored -- it's been recommended to me to format that machine's drive before reinstalling Leopard.
Now I know that my machine has faithfully backed itself up. I can assume that her machine has been backing itself up, but I don't know that for sure, for sure. Is there a way I can check out the capsule from my machine to confirm that it contains a backup set for the other machine before I format its hard drive and do the reinstall?
Chuck

chuckbo wrote:
Yes, I understand that part -- not quite what I'm asking, though.
Is there a way, from my machine, to confirm that her machine has been actively doing backups on the capsule that we share? If I can confirm it, I'll go ahead with the clean wipe on her machine and do the reinstall from time machine. But if I can't find her backup, then I'll have to do a different approach.
Yes. The TC has 2 sparse bundles, one for each Mac. Mount the sparse bundle for her Mac, and use the +Browse Other Time Machine Disks+ option. It will show, among other things, the timeline of backups on the right of the "Star Wars" display. Those are her backups.

Similar Messages

HT201250 How long should an initial time machine backup of tack for 675 GB?s with a USB external hard drive?

How long should an initial time machine backup of tack for 675 GB?s with a USB external hard drive?

Not much faster than 40 GBs-60GBs per hour. So, minimally, around 12 hours.

How does one SUCCESSFULLY transfer Time-Machine backup to a new (larger) hard disk drive using OSX 10.5.8

I have read a number of articles about how to transfer a complete Time-Machine backup to a new (larger) hard disk-drive. Some of these articles are specifically for OSX10.6 users, which are not applicable to me since I am operating with OSX 10.5.8.
However, I have tried several times to use the Disk Utility 'Restore' function, dragging my old time-machine volume into the 'Source:' box and my new volume into the 'Destination:' box. This works, of sorts, BUT the newly created volume on the new larger hard disk-drive remains the same size as the original volume on the old Time-Machine HDD, with no apparent way of increasing the new volume's size. So I am not really any better off:
E.g. the total capacity of my new HDD is stated by 'Disk Utility' to be 465.8 GB, of which I'm told 228.2 GB is used for the Backups.backdb folder, but only 4.6 GB of free space is actually available. Yet under the 'Partition' tab of 'Disk Utility' it tells me that there is still 236.4 GB of available space.
Does anyone know how to resolve this issue without upgrading to OSX 10.6?

First, how did you prepare your new drive? See:
Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
If you plan to partition this new drive then be sure you create a larger partition for TM than your old volume.
Next, clone your old TM volume:
Clone using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4.Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.

How Can I Migrate My Time Machine Backups To A New External Hard Drive?

I have a external hard drive that has 500 GBs left, but I want to buy a larger drive.

ivan wrote:
How Can I Migrate My Time Machine Backups To A New External Hard Drive?
I have a external hard drive that has 500 GBs left, but I want to buy a larger drive.
Hi iVain
Fire up *Disk Utility*, click the Restore tab, then drag your old and new TM drives into the Source and Destination fields. Click Restore, and a complete copy of your old TM files will be made on the new drive. Go to TM preferences and select the new drive, and it will continue backing up just as it left off.
Hope this answers your question. See:
http://discussions.apple.com/thread.jspa?threadID=2595485&tstart=0

How do I reformat my time machine backup disc

My time machine backup disc comes up with error:
Files can’t be copied onto the backup disk because it appears to be read-only.
Disc utility can't fix it and gives me the following message:
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
How do I reformat that drive?

Re: How do I reformat my time machine backup disc Oct 13, 2012 5:32 PM (in response to Jim Tee)
Hi again Niel:
Regarding "use the Erase option in disc utility to reformat my backup disc:
I tried the erase again and came up with the following fault messages.
"Mac OS X can’t repair the disk “Time Machine.
You can still open or copy files on the disk, but you can’t save changes to files on the disk. Back up the disk and reformat it as soon as you can."
Also
"Disc erase failed
Disk Erase failed with the error:
Couldn’t unmount disk."
Thanks for your patience
jt

How can I copy a time machine backup from one Time Capsule to another ?

How can I copy a time machine backup from one Time Capsule to another ? I bought a 1 Tb Time Capsule to replace my 512Mb Time Capsule. Now, I like to copy my time machine backup from the old Time Capsule to the new one so I can keep using my backup.

from this support article:
(click on image to enlarge)

I have already used time machine backup and I last used on june 2012 . Today when I tried to backup the time machine is still stuck on preparing my backup?What shallI do?

I have already used time machine backup and I last used on june 2012 . Today when I tried to backup the time machine is still stuck on preparing my backup?What shallI do?

See Section C here > http://pondini.org/TM/Troubleshooting.html
From Here > http://pondini.org

How might I move my Time Machine Backups.backupdb file to a partition on a different drive to enable reformatting the drive it is on, so that might put it back in place later?

I have an external drive I use as my Time Machine backup location.
Recently, I started getting an error on it. It tells me there is a problem, and to repair it with Disk Utility. Disk Utility cannot verify the disk, and needs me to repair it, but it cannot repair it. It advises me to copy all of the important files from this disk to another location, and then reformat the drive.
So, I have copied all of the files that were not part of the Backups.backupdb folder structure to a partition on another disk, and removed them from the defecting drive, leaving ~250GB of files in the Time Machine backups files.
I cannot seem to get this to copy to a ~350GB folder on another drive, formatted Journaled, Extended as recommended.
What do I do?

A Time Machine backup is owned by TM.. this is standard kind of issue.. the very fact that you cannot copy it suggests it is corrupt.. or you cannot change permissions on the whole file.. let me assure you the way TM works.. what you have so far copied is completely useless.
Have you run a verify of the backup??
The fact that disk utility is not working means something is wrong.. it should be able to fix a drive..
And the fact the drive is only 12-18months old is also not relevant.. the present state of the drive is too poor to be considered reliable.
What type of drive is it.. ie USB2 USB3 and what brand??
It is not just the disk that can go bad but the controller/power supply as well.. and some brands seem to have bad batches.. eg seagate USB drives I was seeing recently.
I prefer drives where I buy a shell and put the drive into it.. so I can move the drive to another shell without breaking warranty (or the case).
The actual command for terminal I always just look up when I want to do them.. I am getting old and I have no space left for command line stuff.. although it was all there in the past.
eg today I hit. http://www.cnet.com/au/news/using-the-os-x-terminal-instead-of-the-finder-to-cop y-files/
This includes the rsync command.. lets try this one..
I can copy my downloads directory to a time capsule disk. I start with login as super user just to make sure I don't have permissions issues.. you should definitely do this. running rsync is great as it will give you info when it fails and it will do incremental if you run it again later. You construct the command by simply dragging the folder from finder into terminal and slightly modifying it as per the article above.. So my actual command as I am copying deliberately to a new folder on the TC.. You don't want files to land on the root.. even if it creates another folder.
$ sudo su
Password:
sh-3.2# rsync -av /Users/Ray/Downloads/* /Volumes/DataTCgen3/downloads/
building file list ... done
#A 12v25v Descrip.doc
$T2eC16V,!)!E9s2fB+iqBQNKwsSzpQ~~60_3.JPG
$_12.JPG
0198f23d9wahwkzzsf20dk15czcy.pdf
0340039AINETCNCTKGS.PDF
I have 60GB or so in this folder and it is copying at about 20MB/s over ethernet.. so it is not super fast.. but there is probably some error checking going on at the same time.

HT201250 How can I migrate a Time Machine backup from an external hard drive to a new TimeCapsuls?

I just got a 2TB Time Capsule. I want to migrate my time machine backups on an external hard drive to the new Time Capsule. I have about 430Gb of files to back up; I don't want to wait 7-8 days for the backup, unless I have to. I am using OS 10.7.5 (forget which cat that is). I have mounted the TC drive as 10.0.1.1; I tried to drag and drop from old to "data" on TC, but I get the error "The volume is the wrong format for a backup." Any ideas how I can move my old files to the new, and bypass creating a brand new backup file?
Thanks.

Rather than do that, which means starting over from scratch, losing all your edits, organisation and so on, why not simply use iPhoto Library Manager to revert the Library to the older version? Easier, less destructive.
The instructions on that are here
If you really want to start over: you can access the Originals folder simply by going to your Pictures Folder and finding the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.

How do I restore a Time Machine backup to a new hard drive in an iMac 5.1?

Hi all,
I recently had a hard drive failure in my mid-2006 iMac 5.1 and have now installed a new drive. The iMac was previously running an up-to-date version of OSX 10.7 - Lion. However I've struggled to restore the machine from its Time Machine backup, trying using both Setup Assistant which has never allowed me to overwrite my startup files with the restore, and several attempts using Migration Assistant and following Pondini's Migration Problems tutorial, which worked partially, but has left me with a series of files/folders, many of which have Permissions problems.
The most recent attempt, using Migration Assistant is giving me a new error message:
You can't transfer from your other Mac to this one because your other Mac uses a newer version of Mac OS X. You must upgrade this Mac before you can transfer from your other Mac.
I'm getting it that the Time Machine data is more current (in terms of OSX) than my desktop machine - which I have prepared using my Snow Leopard start-up disc (but wonder why this is the first time that I'm getting told this on attempting to restore). But how do I get my iMac to a state whereby I can restore from the Time Machine?
I can't upgrade the Mac using Software Update as this will only get me to OSX 10.6.8 (which is where I currently am, although some applications don't seem to want to work in this state - App Store, Safari on occasion); I can't download OSX 10.7 from the App Store as it is no longer there, and I can't install OSX 10.8 as my iMac is not compatible with this release. I seem to be stuck in an infinite loop from which I don't seem to be able to get out of.
Can anyone help at all?
Many thanks in advance for any contributions & apologies if I've omitted any crucial information that might be needed to help me out.
Paul

Thanks den.thed,
Apologies for not replying back sooner - I've been away.
Although your suggestion helped me in getting a copy of Lion that I could use, it didn't help with the restore from Time Capsule issue. I had to download the Lion app onto my MacBook & then transfer it across but it wouldn't let me upgrade my OS for some reason, so I ended up wiping the iMac completely and restoring via my Snow Leopard install disk. For some reason, this time, it let me have the option of using Setup Assistant to access the Time Capsule for a complete restore.
Now, over a week later, with various bits of tweaking and reinstalling some apps that didn't seem to come across, I have my system back.
Thanks for the help anyway.
Cheers,
Paul

How do I copy the Time Machine backup folder to another folder? (Mac 10.7.5)

Short version: I like to make an initial backup of my Mac OS before I start installing stuff...just in case I need to get back to square one down the road. I travel as a freelancer for work, so every couple of months, I'm on a new rented system. But I need to move that initial backup folder to a sub-folder so that I can continue to run TM without ever deleting anything from that initial backup. When I go to move or copy it to another folder or drive, it tells me I don't have permission. How do I get permission to move it?
I've tried changing the permissions on the folder itself... It won't let me select any other users, and admins are not on the "write" list. No dice.
Any ideas?
I'm on a Mac Pro 8-core
MacPro3,1
OS 10.7.5
Thanks!

Yeah, sorry...but there doesn't seem to be a "Time Machine" forum anywhere, this was the closest I could find. I could have posted in OS 10.7 forum...but I was worried the traffic would be much lighter there. If I should move my question there, I will.
Ok, so my Time Machine has backed up to my external drive which I have split into two separate partitions. I do not have automatic backups on. I just ran it once to get the "footprint" before I start to alter things to my needs. I'd like to compress and put away the backup on that first partition as sort of a general "back to square one" backup. I chose to use Time Machine because I can literally restore it back to all the original settings, etc. This is just a fire plan, but I really want to lock it off.
Then, I want to set my second partition on that same drive as my incremental Time Machine backup. That way, once I run out of space and it begins deleting the old stuff (and I will run out of space...I export several hundred gigs of video files per day), I can always retain that initial backup.
The problem is, when I go to move that backup....AFTER I've pointed Time Machine to the new partition...or any other drive for that matter... It tells me that either the folder doesn't have "ownership rights" or it simply "cannot do that." (I'll snag you a screen grab next time I'm by it if you want.)
So, how do I get it to move where I want it so that I can make a new one?

How to repair a corrupt Time Machine Backup

I have been Googling & searching also here in the support community about how delicate Time Machine is. I think I've broken so many Time Machine "don'ts" that I NOW know what I did and where I need to do things differently. Moving forward.
I have a Time Machine backup on an external HD. I have also recently re-installed Mountain Lion and now need to restore my files from Time Machine.
This is where the problem starts. Time Machine won't restore, and when I (yes, I NOW know it's a no-no, please hold your foul comments) go into the Backups.backupdb folder manually, all the folders are now shortcuts, and they lead no where.
I have tried to no avail:
To repair permissions with Disk Utility
To repair the drive with DiskWarrior
Does anyone have any (constructive) suggestions? This backup contains the usual personal documents & photos that we can all agree are most important, but also I have stuff pertaining to legal matters that I can not lose under any circumstances. Having invested $99.95 on DiskWarrior just really burns me up at this point because that was the recommended fix for this problem.
Any advice or assistance I can get from anyone would be deeply appreciated!

When I go into the "star wars" Time Machine screen, all the backups are blank & black. My Backups.backupdb folder has gone from 483Gig, to 4.72TB on a 2TB drive. When I use the finder to manually look in the Backups.backupdb folder, all the folders inside are alias' and when I double-click them, they say that the alias is broken, do I want to delete it or fix it.
I know that all the Backups.backupdb is just a database that links to the files stored on the hard drive, and I need a utility that will repair the links to each file. If no one has something that does this, perhaps this is a great opportunity for someone to create such a utility.
I'm going to try using Data Rescue to just restore the drive completely and pick through it manually.

HT201250 How do you browse other time machine backups of other drives?

It seems to me that Time Machine used to display an option to "Browse other Time Machine backups."
For example, my iMac has its Time Machine external drives attached to it.
Both my iMac and my MacBook Pro back up to it, though my MacBook Pro does so wirelessly by connecting thru the iMac.
So how can I browse thru the backup of the MacBook Pro from my iMac, since the backup is actually located on the iMac's attached drive.
In Time Machine (or somewhere) it used to say "Browse other Time machine Backups."
I cannot seem to find that option any longer?

chaseholden wrote:
It seems to me that Time Machine used to display an option to "Browse other Time Machine backups."
[snip]
In Time Machine (or somewhere) it used to say "Browse other Time machine Backups."
I cannot seem to find that option any longer?
If you have TM in the menu bar or the Dock, hold down the option key as you choose the TM menu or the TM icon in the Dock.

HOW DO I GET A TIME MACHINE BACKUP OUT OF TRASH ???

I know this sounds like a really stupid question because to get things out of trash you just grab them and move them like you do with all the icons. BUT..... I accidentally put a vital time machine backup in the trash and then tried to move it back to the external disc and it wanted to go through the rigmarole of 'copying' which doesn't normally happen when you move things out of the trash.
Although I thought that was strange I thought it wouldn't matter if it was copied but what happened was it kept on saying it was 'preparing' the huge number of items and that number kept kept on climbing to 12 million before I stopped it. It should have been no more than about two million for the entire hard disc.
I tried this in several different ways but it did the same thing all the time, keeping the icon in the trash and saying it was copying but not actually doing it.
There must be a way of getting the thing out of trash and I need it because it has a year old backup on it I urgently need.
This really is a failure of the time machine software writers to write sensible software. Can anyone tell me how to sort this ?? ( if anyone is still left actually using this wrecked forums that is !)

You cannot just drag a Time Machine backup out of the Trash. It will always copy itself from the Trash to the location you chose to drag it to. What it won't do is copy itself back to where it was on the backup drive. The issue you have is not the fault of the authors of Time Machine. It's the fault of the user by trying to dump a Time Machine backup by putting it in the Trash instead of using the Time Machine application.

How do I retrieve my Time Machine backups and put them onto Tiger 10.4?

I recently got rid of my last computer that had Time Machine (Leopard) on it. Before getting rid of it I backed everything up as I usually did with my external HD. Now the computer I have only has Tiger 10.4 and I can't seem to be able to retrieve my iphoto and my itunes. I was wondering if the only way to access my iphoto/itunes off of my external HD is to upgrade this computer to Leopard or Snow Leopard? I don't want to lose all my pics and music, can anyone help?

Dan Ringuette wrote:
There is no way to get inside that backup package to browse the file contents. How does one do this? Can the AirPort Setup Assistant reconfigure the Time Capsule to allow Tiger computers to browse the backup files of a Time Machine backup from a Leopard computer?
Not on Tiger, I'm afraid. Time Machine uses a rather complex and unusual file structure to make it's "magic" work: doing only incremental backups of new and changed items, but having each one still be, in effect, a full backup. This is done by, among other things, using multiple "hard links" at both the file and directory level.
As I understand it, OSX had to be changed, effective with Leopard, to do this at the directory level; Tiger just doesn't understand it, so can't deal with it.
Your only option is to borrow the use of a Leopard or Snow Leopard Mac, and use the TM interface to restore the files to it (or an external disk attached to it).

How to check that a time machine backup is ready for use?

Similar Messages

Maybe you are looking for