How to check the current networks on receiver with SHAREit?
1. Launch SHAREit and click Receive; 2. The page will change to "Waiting to receive", and click the "Friends cannot find you?" button; 3. The "Current networks" will pop up, as follows: .lan .EjrpN-........etc.
For the most part, sender can find receiver automatically. Under narrow cases, sender may need to join the same network as receiver.
Similar Messages
-
How to check the current EHP stack level? in SAP
Dear All,
How to check the current EHP stack level? in SAP . i have checked forum before i am posting but still comfused .
same one said SAP_APPL , EA_Appl and SAP _HR is 60n if n=1.2.3.4. if n =1 is enhanced package 1 similarly 2,3,4 .
some one said SAP_BASIS 701,702,703,704 . according ehp1,2,3,4.
Pls check the details and confirm either is ehp1 or ehp4 .
Component version is simply shows SAP ECC 6.0 in system -> status.
Software Component - Release - SP level
SAP_ABA 701 0007
SAP_BASIS 701 0007
PI_BASIS 701 0007
ST-PI 2008_1_700 0003
SAP_BS_FND 701 0008
SAP_BW 701 0007
SAP_AP 700 0021
WEBCUIF 700 0008
SAP_APPL 604 0008
SAP_HR 604 0029
SAP_HRCAR 604 0029
SAP_HRCAT 604 0029
SAP_HRCAU 604 0029
SAP_HRCBE 604 0029
SAP_HRCBR 604 0029
SAP_HRCCA 604 0029
SAP_HRCCH 604 0029
SAP_HRCCL 604 0029
SAP_HRCCN 604 0029
SAP_HRCDE 604 0029
SAP_HRCDK 604 0029
SAP_HRCES 604 0029
SAP_HRCFI 604 0029
SAP_HRCFR 604 0029
SAP_HRCGB 604 0031
SAP_HRCHK 604 0029
SAP_HRCID 604 0029
SAP_HRCIE 604 0029
SAP_HRCIN 604 0029
SAP_HRCIT 604 0029
SAP_HRCJP 604 0029
SAP_HRCKR 604 0029
SAP_HRCMX 604 0029
SAP_HRCMY 604 0029
SAP_HRCNL 604 0029
SAP_HRCNO 604 0029
SAP_HRCNZ 604 0029
SAP_HRCPH 604 0029
SAP_HRCPT 604 0029
SAP_HRCRU 604 0029
SAP_HRCSE 604 0029
SAP_HRCSG 604 0029
SAP_HRCTH 604 0029
SAP_HRCTW 604 0029
SAP_HRCUN 604 0029
SAP_HRCUS 604 0029
SAP_HRCVE 604 0029
SAP_HRCZA 604 0029
SAP_HRGXX 604 0029
SAP_HRRXX 604 0029
EA-IPPE 400 0018
EA-APPL 604 0008
EA-DFPS 600 0018
EA-FINSERV 604 0007
EA-GLTRADE 604 0008
EA-HR 604 0029
EA-HRCAR 604 0029
EA-HRCAT 604 0029
EA-HRCAU 604 0029
EA-HRCBE 604 0029
EA-HRCBR 604 0029
EA-HRCCA 604 0029
EA-HRCCH 604 0029
EA-HRCCN 604 0029
EA-HRCDE 604 0029
EA-HRCDK 604 0029
EA-HRCES 604 0029
EA-HRCFI 604 0029
EA-HRCFR 604 0029
EA-HRCGB 604 0029
EA-HRCHK 604 0029
EA-HRCID 604 0029
EA-HRCIE 604 0029
EA-HRCIN 604 0029
EA-HRCIT 604 0029
EA-HRCJP 604 0029
EA-HRCKR 604 0029
EA-HRCMX 604 0029
EA-HRCMY 604 0029
EA-HRCNL 604 0029
EA-HRCNO 604 0029
EA-HRCNZ 604 0029
EA-HRCPH 604 0029
EA-HRCPT 604 0029
EA-HRCRU 604 0029
EA-HRCSE 604 0029
EA-HRCSG 604 0029
EA-HRCTH 604 0029
EA-HRCTW 604 0029
EA-HRCUN 604 0029
EA-HRCUS 604 0029
EA-HRCVE 604 0029
EA-HRCZA 604 0029
EA-HRGXX 604 0029
EA-HRRXX 604 0029
EA-PS 604 0007
EA-RETAIL 604 0007
FINBASIS 604 0008
ECC-DIMP 600 0018
ERECRUIT 604 0008
FI-CA 604 0008
FI-CAX 604 0007
INSURANCE 600 0018
IS-CWM 600 0018
IS-H 600 0024
IS-M 600 0018
IS-OIL 600 0018
IS-PS-CA 604 0007
IS-UT 600 0018
LSOFE 600 0018
SEM-BW 604 0008
ST-A/PI 01M_ECC600 0001
Regards
Edited by: satheesh0812 on Nov 17, 2011 7:57 AMHi Sateesh,
SAP_ABA 701 0007
SAP_BASIS 701 0007
PI_BASIS 701 0007
ST-PI 2008_1_700 0003
SAP_BS_FND 701 0008
SAP_BW 701 0007
SAP_AP 700 0021
WEBCUIF 700 0008
SAP_APPL 604 0008
Based on the component information provided by you, I can conclude that your system is ECC 6.0 EHP4.
EHP4 is derived from your component SAP_APPL 604.
In addition to this your EHP4 system has NW stack on NW 7.0 EHP1.
Hence your system is ECC 6.0 EHP4 with NW 7.0 EHP1.
Hope this answers your query.
Regards,
Deepak Kori -
How to check the current open period
Hello ABAP Gurus,
Could you help on how to check the current open period...
Sample would be
current date = may 1, 2009 but period for may is not yet open
so open would be april period
Thanks in advance....
Edited by: nanz ruiz on May 27, 2009 3:34 AMHi,
Check the fieldas FRYE2,FRPE2,TOYE2,TOPE2 of table T001B for a given varient.
Regards
Vishnu Gupta -
How to check the current time with a Stored time in string format
Hi All
I would like to compare the system time with an existing time values which is allready there in String format..
i mean i would like to check if the SysTime is inbetween 6:30 and 14:00
I accomplished this in Oracle ..
Select 'Y' from dual where to_date(to_char(sysdate,'HH24:MI '),'HH24:MI') between to_date('06:30','HH24:MI') and to_date('14:00','HH24:MI')
But instead of checking the DB each and every time , the perfomance would be better if we can do this in our java code..
Could some one provide me with a code to accomplish the above scenario..
Thanks in advance..,.,import java.util.Calendar;
Calendar rightNow = Calendar.getInstance(); // gets the current date and time to millisec
Calendar earlyTime = Calendar.getInstance().set(Calendar.HOUR_OF_DAY, 6).set(Calendar.MINUTE, 30);
Calendar lateTime = Calendar.getInstance().set(Calendar.HOUR_OF_DAY, 8).set(Calendar.MINUTE, 0);
if (rightNow.compareTo(earlyTime)> 0 && rightNow.compareTo(lateTime) < 0){
// do something
}Try this. -
How to check the checkbox of Adobe Installer with the Aplescript??
Hi All,
am trying to Install Adobe Flash Player thru stand alone Installer, I want to check the check box and need to click on Install button,
Whem am trying to get the entire contents of window thru UIElementInspector, am unable to get the contents of checkbox and Install buttons..
I just tried myself with the below script to click the checkbox, but did not succeed, error saying unable to get the checkbox.. Pls suggest how to check..
tell application "System Events"
tell process "Adobe Flash Player Install Manager"
set frontmost to true
click the checkbox "I have read and agree to the terms of the Flash Player License Agreement" of window "Adobe Flash Player 11.5 Installer."
end tell
end tell
Pls check the below link to view the image of the Adobe Flash Player Installer.
https://docs.google.com/document/d/1yzyBTrvi94QxjlEAlcbudOBpXiTGPEI2LA3D1iEo8Gw/ editI'm working on a similar script, but when I execute the script, I run into this error:
error "System Events got an error: Can’t make {563, 234} into type list." number -1700 from {563, 234} to list
Any ideas? Here's the background: I'm trying to click the search box on this page: http://www.alexa.com/siteinfo/payeasenet.com
Here's my UI Inspector results of said element:
<AXGroup>
<AXScrollArea: “”>
<AXWebArea: “”>
<AXGroup: “”>
<AXGroup: “”>
<AXTextField: “Enter a search query”>
Attributes:
AXRole: “AXTextField”
AXSubrole: “AXSearchField”
AXRoleDescription: “search text field”
AXChildren: “<array of size 0>”
AXHelp: “”
AXParent: “<AXGroup: “”>”
AXPosition: “x=550 y=212”
AXSize: “w=214 h=30”
AXTitle: “Enter a search query”
AXDescription: “”
AXValue (W): “”
AXFocused (W): “1”
AXEnabled: “1”
AXWindow: “<AXWindow: “Payeasenet.com Site Info”>”
AXSelectedTextMarkerRange (W): “(null)”
AXStartTextMarker: “<AXTextMarker 0x60800024af80 [0x7fff758b4eb0]>{length = 24, bytes = 0xbd040000000000006024c514010000000000000001000000}”
AXEndTextMarker: “<AXTextMarker 0x600000248a30 [0x7fff758b4eb0]>{length = 24, bytes = 0xbf0400000000000040420c17010000000100000001000000}”
AXVisited: “0”
AXLinkedUIElements: “(null)”
AXSelected: “0”
AXBlockQuoteLevel: “0”
AXTopLevelUIElement: “<AXWindow: “Payeasenet.com Site Info”>”
AXNumberOfCharacters: “0”
AXSelectedText (W): “”
AXSelectedTextRange (W): “pos=0 len=0”
AXVisibleCharacterRange (W): “pos=0 len=0”
AXInsertionPointLineNumber: “0”
AXTitleUIElement: “(null)”
AXAccessKey: “(null)”
AXRequired: “0”
AXInvalid: “false”
AXPlaceholderValue: “”
AXARIABusy: “0”
Actions:
AXPress - press
AXShowMenu - show menu
AXScrollToVisible - AXScrollToVisible -
How can I check the current cost and budget in SAP?
Dear experts,
How can I check the current cost and budget in SAP for the PR approval?
Table:COEP, COBK, COSS COSP can not find below information:Tender_budget,Working_budget,reconciliation,Additional,Adjustment,variation
Best regards,
MerryDear expert,
I need below information:Project_id,Cost_code,Nature_code,Section_code,Work_type,Work_code,Cost_type,Suffix,item_desc,Tender_budget,Working_budget,reconciliation,Additional,Adjustment,variation
Can you tell me which table and filed can find them?
Many thanks.
best regards,
Merry -
Q: How to retrieve the current URL with PL/SQL
I've got a pair of dynamic page portlets on a page. The first is simply an input text box and a submit button, the second is an inventory 'report' based on what is entered in the text box. When a value is entered and the button pressed, there is javascript behind the button that takes the current URL, adds '&ITEM=XXXXXXXX' (removing it first if this is not the first invocation of the page), and redirects to the new page.
The second portlet uses the &ITEM parm to list a bill of materials for the item. If one of the items possesses a sub-assembly, I want to display the item# in an <a href= manner to make it so the user can simply click on the link to see the BOM of the subassembly.
To do this, I believe I need to capture the current url and modify it as required to pass the new &ITEM value. I'm having a lot of trouble trying to figure out how to get the current page url. Any help would be greatly appreciated!
GeoffHello
I have a similar problem I have developed a pl/sql portlet and put it into a page, this portlets display a dynamic page. This dynamic page have a search functionality, what I am trying to do is that when I click the search button on the dynamic page it recall the whole page and pass the paremeter that the user wrote on the search box, then the portlet that contains the dynamic page recieve the parameter and recall the dynamic page with the parameter that was received. The problem that I have is that the portlet receive the parameter but when I pass the parameter to the dynamic page it doesn't get it. This is the way the I am calling the dynamic page inside my portlet into the show procedure:
EXECUTE IMMEDIATE
'begin
APP_NAME.PG_DYN_DIR_ALFABETICO.show (
p_arg_names => PORTAL30.wwv_standard_util.string_to_table2(''url_page'',''search_param''),
p_arg_values => PORTAL30.wwv_standard_util.string_to_table2(:1,:2));
end;'
using url_pg,p_text1;
The dynamic page receive the first parameter(url_page) but not the second one(p_text1), I have checked that the p_text1 has a value on my portlet before I send it to the dynamic page so I really don't understand why my dynamic page doesn't work.
Please HELP ME. I am desperate
Ana Lasprilla -
How to check the format (PAL or NTSC) of a DVD?
I wonder if someone can tell me how to check the format (PAL or NTSC) of DVD’s that I receive from my friends around the world. Many of them have no marking as to the format... Is there some software that can do this?
Hello Peace Freak,
have a look at myDVDedit (http://www.mydvdedit.com). It's actually designed to do postproduction on a DVD, but will also display a lot of info, such as TV standard, 16:9 vs. 4:3, etc.
Insert your DVD, then launch myDVDedit and open the VIDEO_TS folder contained in your DVD. Click the IFO tab to find the information you're looking for.
hope this helps
mish -
How to get the current logical system?
Dear Abapers:
I can't find the logical system value from the table SYST, pls tell me how to get the current logical system name, Thanks!Hi,
Check with the table T000, the Logical system field name is LOGSYS.
Regards
Thiru -
How to get the current week from sysdate?
Hi sir,
i want to know how to get the current week from sysdate?
thanksHi Nicolas
It seems you like to check my post and also make commend ;) thanks for your attention
Have you ever read the posts above and given solutions ?Yes, I did
Have you read the docs ? Yes, I checked
What's the added value here ?Did youYou shared doc with solution(long one), I shared short one which point same solution(Check what Joel posted)..So what is benefit, As you can guess oracle docs are sometimes become so complicated as specialy for beginner...(At least it was like that for me and Belive me somedocs are still sooo complicated even for oracle coworkers ) But for you I dont know ;)
=> Why writting the PS in bold ?Why.. Let me think... Ohh Maybe I am looking some questions(many) and even user get answer they should not changed status so I am reading some posts and try to get problem and loosing time..
So I am putting that PS wiht BOLD because I dont wanna lose time my friend ;) Because While I am trying to help ppl here In same time I am trying to giving support to my customer prod systems. Which mean time is very important for me...
Hope my answer could satisfy you..
One important PS for you.. You may not like my posts (or someone) but my friend I become tired to read&answer and make commend to on your comment which is about my posts.
I am not newbie in forum(At least I fell like that) and I belive I know how I should make post..
Thank you
Regards
Helios -
How to Get the Current Workitem id at runtime
Hi All,
I have a scenario, where request pending with a user who has already resigned the organization. The requirement is that we need to provide a report
of the request and with whom it is pending with along with the workitem id with a forward push button.
So that if the user identifies that a request is pending with someone he can click the record and press for the forward button and a pop-up to be showed where he can enter the userid to whom he needs to forward it.
In this scenario can anyone tell me how to get the current workitem id at run time and to save it to a custom table.
I tried with method before workitem execution, but here i am not getting the current workitem id.
Can you please suggest a good solution for this.
Thanks and Regards,
BalajiKarri,
I think i can explain you with an example.
Here is my Scenario.
A user has raised a Gate pass and it went to all approval's and got approved and the material is also sent out from the plant. Lets take the date as 1.1.2013 (A Warehouse person have done the checking and sent out of the plant).
On 1.3.2013 some of the material has been returned and a material inward request has been raised and now the warehouse person has to do a inward checking and to sent it back for the initiator for the approval, but the warehouse person has resigned the organization on 1.2.2013, now the workitem is pending with the warehouse person who has already resigned.
My scenario is once the material inward request is created and before the workitem is delivered to the warehouse person i need to get the workitem id and to store the workitem some where.
So that in future if any warehouse dept head wants to forward the workitem which are lying in the person inbox who has already resigned he can do it via a report using this workitem id.
So, can anyone help how to get the dialog workitem id before the workitem creation or execution. I tried with "method before workitem execution" but my break point is not triggering at this point.
Thanks and Regards,
Balaji -
Hello!
I'm trying to create a kind of a navigation tree for my application.
It should represent some elements of an XML structure and some other nodes for other options.
The binding with the context is not a problem, I can create the tree up to all the levels I want to.
The problem now is, that I don't know, how to get the "current tree element", when there is any action.
For example:
public void onActionSelect(...) {
String test = wdContext.currentTreeNodeElement().getText();
wdThis.wdGetContext().currentContextElement().setSelectedElement(test);
With this method I can get the text of the "first level nodes". If I want to get the "second level node", I can do
String test = wdContext.currentTreeNodeElement().currentChildElement.getText();
..and for the next levels so on.
Isn't there any general method to get the information of the selected element without knowing before, whether it is a nodeElement or a nodeElement.currentChildElement or a nodeElement.currentChildElement.currentChildElement, ...?
Greetings,
RamóHi,
if you following that pdf ,
i think your not implemented the below code in DomodifyView method
if (firstTime) {
IWDTreeNodeType treeNode = (IWDTreeNodeType) view.getElement("TheNode");
/* The following line is necessary to create parameter mapping from parameter "path" to parameter "selectedElement".
Parameter "path" is of type string and contains the string representation of the tree element (its corresponding context element to be exact)
that raised the onAction event. Parameter "selectedElement" is of type IWDNodeElement (or extends it) and is defined as parameter in the event handler
that handles the onAction. The parameter mapping defined here translates the String "path" into the corresponding context element that then can
be accessed within the event handler
treeNode.mappingOfOnAction().addSourceMapping("path", "selectedElement");
/* The following line is necessary to create parameter mapping from parameter "path" to parameter "element".
Parameter "path" is of type string and contains the string representation of the tree element (its corresponding context element to be exact)
that raised the onLoadChildren event. Parameter "element" is of type IWDNodeElement (or extends it) and is defined as parameter in the event handler
that handles the onLoadChildren. The parameter mapping defined here translates the String "path" into the corresponding context element that then can
be accessed within the event handler
treeNode.mappingOfOnLoadChildren().addSourceMapping("path", "element");
please cross check once.
Thanks,
Ramesh -
How to get the current month value for a customer exit variable?
How to get the current month value for a customer exit variable?
And also if we have an InfoObject with date value (including date, month, year), then how to derive the month value from this date type of Char.?
Thanks!Hi Kevin,
Check here........
Re: Customer Exist for "From Current Date To Month End"
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/25d98cf6-0d01-0010-0e9b-edcd4597335a
Cal month
Regards,
Vijay. -
How to cooperate the current mail system with Sun Java Commnication Suite 5
Dear all and Shane,
Excuse me for bothering you again.
Due to time limited, I would like to know how to cooperate the current mail system with Sun Java Commnication Suite 5. I mean I would like to use current mail system (mailscanner + postfix + courier-IMAP + clamav + spamassassin + webmail) and use the outlook connector to connect to Sun Java COMMS 5 to share the calendar, contacts only.
Right now I have done the testing by using outlook, mac mail, thunderbird to share calendar,contacts via Sun Java COMMS 5 in Centos Linux 5.
My plan is as following
1. Sun Java Communication suites 5 server ( I called it comms5 ) will be in DMZ zone and will open the necessary ports in firewall.
2. I will create more than six sub domain name in Sun Delegate server and the necessary accounts within these domain names.
3. All messages will be transmitted via Postfix and clients will retrieve from Courier-IMAP
4. All Clients included other branch offices will use different mail clients to share their calendars, contacts via COMMS5 ( But how will COMMS handle the messages such like invitation ? )
Any suggestions will appreciate.
PS: Is it possible to classify the contacts in outlook address book ?
For example, when user click the receiver, it will show like as following
GLOBAL ADDRESS BOOK
--Director
--and so on
----CN.BRANCH OFFICE
-----------CN01 EMAIL ADDRESS
-----------CN02 EMAIL ADDRESS
-----------CN03 EMAIL ADDRESS
and so on
----JP.BRANCH OFFICE
-----------JP01 EMAIL ADDRESS
-----------JP02 EMAIL ADDRESS
-----------JP03 EMAIL ADDRESS
and so on
----TW.BRANCH OFFICE
and Due to the user account is located in CN.BRANCH OFFICE, it will extend the CN.BRANCH OFFICE contacts level.
Excuse me for bad English, hope you can understand it.
Best Regards,
BruceDogz wrote:
Due to time limited, I would like to know how to cooperate the current mail system with Sun Java Commnication Suite 5.
I mean I would like to use current mail system (mailscanner + postfix + courier-IMAP + clamav + spamassassin + webmail) and use the outlook connector to connect to Sun Java COMMS 5 to share the calendar, contacts only.Getting your current mail system to 'co-operate' in this way will require more time then simply migrating the accounts of users on the current mail system to the comm-suite-5 installation and making use of UWC for Webmail access and ClamAV/SpamAssassin integration within the messaging MTA.
Also the use of Outlook Connector with a non-Sun IMAP backend isn't supported, nor is the use of a non-Sun IMAP backend possible with UWC.
Right now I have done the testing by using outlook, mac mail, thunderbird to share calendar,contacts via Sun Java COMMS 5 in Centos Linux 5. Once again I should remind you that CentOS is not a supported platform for comm-suite-5
Regards,
Shane. -
Dear All,
My testing engineers are checking the application from front end, i have to find the current SQL (What SQL queries are used in the application) statements in the back end.
Please let me know how to find the current executing SQL stements.
Thanks in advance
MahiYou need to join this query with one more table - v$sqlstats. There are many statistics in particular cpu_time, elapsed_time etc stored in that table for each sql statement.
You can join v$sqlstats by sql_id until you have multiple child cursors for single statement.
Or you can just join to v$sql and get statistics from there and in this latter case you include child_number column to distinguish child cursors from each other.
Best Regards,
Alex
Maybe you are looking for
-
No Multi-tasking No motion sensor games this is no...
I bougt this mobile 3 month ago of 6620 rs only . . . In this range android way is better . . . There is no multi tasking there is a motion sensor but no games available for it NOKIA ASHA 311 PROBLEMS: .No options when sending a message .No groups in
-
How to retrieve message history on iMac
I noticed that when I switched on my iMac, previous messages handled by iPhone and iPad didn't show up. Does anyone know how to retrieve (synchronise) history?
-
Problem creating schema/tables on sybase
Running the schematool or using the SynchronizeSchema feature, I get the following exception on sybase: com.sybase.jdbc.SybSQLException: The 'CREATE TABLE' command is not allowed within a multi-statement transaction in the 'MEDIA' database. The same
-
Msql 5.0.18-standard/mysql prefpane???
Hi, I installed the 64bit version of the MAC OS X package (MYSQL) (on my G5) including the system prefpane; I disabled the startupitem in /etc/hostconfig (MYSQLCOM=-NO-) I have set a root password for the mysql root account; /usr/local/mysql/data/ lo
-
Relocating Many original files at once
Hello, I am using itunes v 6 and with all of my music locates in the same itunes music folder on an external hard drive. Since installing the latest version of itunes, I have received the following error code; "original file could not be found, would