How to check the messages in solution manager?

hai experts !
how to check the messages in solution manager?
in which transaction do we see them?

Hi Kiran,
From what I gather from your brief question, you are perhaps looking for CRM_DNO_MONITOR that would display all queries created from Satellite/SolMan system itself, as support messages.
If you are looking for Notifications underlying those messages, please look for DNOTIFWL.
For more specific answers, please provide more description of what you are looking for.
Trust this helps.
Regards,
Srini

Similar Messages

  • How to send support message in solution manager?

    Dear All:
    I need a guilde or document can show me how to configure the service desk in solution manager ...like how to set up a support team and how to send the sopport mesage to SAP and role setting
    thanks
    Regards
    Jack Lee

    Dear Expert:
    I tried to finished these document below:
    Service Desk: Support team determination
    /people/dolores.correa/blog/2007/10/06/service-desk-support-team-determination
    Service Desk Implementation Guide
    /people/bruyneel.guillaume/blog/2008/05/02/service-desk-implementation-guide-part-i
    /people/bruyneel.guillaume/blog/2008/06/13/service-desk-implementation-guide-part-ii
    but I found out that there were something different with my solution manager,
    my solution manager is version 7.
    is there any other documents can clearly guide me how to set up the service desk service on solution manager 7?
    actually i'm not get the whole picture of the concept.
    and i still can't send out the message to SAP~@@
    Regards
    Jack Lee

  • How to check the messages stuck up in the queues.

    hi experts,
    i have implemented the message queues in the EOIO form. if any message is stuck up in the inbound or the outbound queue. where would i will be able to check it.
    i have the answers of checking it up in SXMB_MONI and runtime workbench.
    is there any other way where i can get info about where the message has stuck up
    regards,
    Alpa.

    Hi,
    you could use transactions SMQ1 and SMQ2.
    For more information:
    XI Asynchronous Message Processing: Understanding XI Queues -Part I
    http://help.sap.com/saphelp_nw04/helpdata/en/7b/94553b4d53273de10000000a114084/frameset.htm
    Regards
    Patrick
    Edited by: Patrick Koehnen on Oct 22, 2008 2:51 PM

  • How to handling the SLA in Solution Manager

    Hi Experts,
    I am Workfiow consultant. Presently working on solution manager SLA .Timings for SLA is already maintained in CRMD_SERV_SLA for response and resolution times based on priority.  Now the requirement is to  notify the users when the SLA is breached and SLA clock should be stopped for some of the statuses like SEND TO SAP , Customer Action Etc.
    But by coding / workflow it seems be difficult to handle the this requirement. So is there any configuration apart from CRMD_SERV_SLA that can notify the users when the SLA breached and for stopping the SLA clock on specified status.
    Any good document on Solution manager SLA configuration is  appreciated. I searched in SDN but images in links not displaying properly.
    Waiting for the valuable suggestion.
    Thanks,
    Ramu

    Hi Ramu,
    Please refer SLA Configuration in Solution Manager .
    regards,
    Nibu Antony

  • When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

    Please help. My ipod classic could not be recognised by itunes when I connect my ipod to PC. Previously it has been recognised before I updated. This was a while ago now and so I removed all apple files and re installed the latest itunes but am having the same problem.
    When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

    Some anti-virus programs (e.g., McAfee) have this rule that can be invoked under the "maximum protection" settings: PREVENT PROGRAMS REGISTERING AS A SERVICE. If that rule is set to BLOCK, then any attempt to install or upgrade iTunes will fail with an "iPod service failed to start" message.
    If you are getting this problem with iTunes, check to see if your anti-virus has this setting and unset it, at least for as long as the iTunes install requires. Exactly how to find the rule and turn it on and off will vary, depending upon your anti-malware software. However, if your anti-virus or anti-malware software produces a log of its activities, examining the log may help you find the problem.
    For example, here's the log entry for McAfee:
    9/23/2009 3:18:45 PM Blocked by Access Protection rule NT AUTHORITY\SYSTEM C:\WINDOWS\system32\services.exe \REGISTRY\MACHINE\SYSTEM\ControlSet001\Services\iPod Service Common Maximum Protection:Prevent programs registering as a service Action blocked : Create
    Note that the log says "Common Maximum Protection: Prevent programs registering as a service". The "Common Maximum Protection" is the location of the rule, "Prevent programs registering as a service" is the rule. I used that information to track down the location in the McAfee VirusScan Console where I could turn the rule off.
    After I made the change, iTunes installed without complaint.

  • How do you create a graph in the blueprint of solution manager?

    Hi,
    Does anyone know how to create a graph in the blueprint of solution manager?

    Is a graphic, i´m gonna to summarize you in a chart what i´m doing ....i hope you understand and can help me....
    i sinchroniced Solution Manager with Aris for Netweaver and i want to see the graphics that
    were created in ARIS for netweaver in Solution Manager but can not be .
    I have been researching and not have to see if the Web service??
    Thanks!!!
    Edited by: Mariana Lavastida on Aug 14, 2008 2:33 AM

  • How to check Debug messages in the server

    Hi All,
    I am working on extensions and in my java controller file i have certain System.out.println messages. I would like to know how to check these messages from the server for debugging purpose.
    Kindly help me in the same.
    Thanks
    Deeksha

    11i - log file location - $APACHE_TOP/Jserv/logs/jserv.log
    r12 - log file location - $INST_TOP/logs/ora/10.1.3/opmn/oacore_default_group_1/oacorestd.out
    You can prepend your SOP with some text and search for the text in the log files.

  • How to Check the report is Finished while calling a report from Forms 6i

    Dear All,
    I am Calling a report from oracle forms 6i, after runing report in " Run_Product(REPORTS,:fn_cntl.nb_report_name,ASYNCHRONOUS, RUNTIME, FILESYSTEM,pl_id, NULL);"
    I need to copy the pdf to store it in another place once the report is generated.
    My Problem is : that i want ot Check first the report has generated after " Run_Product(REPORTS,:fn_cntl.nb_report_name,ASYNCHRONOUS, RUNTIME, FILESYSTEM,pl_id, NULL);" is executed ? How to check the report is generated ot not?
    As i tried to use the below procedure after "Run_Product(REPORTS,:fn_cntl.nb_report_name,ASYNCHRONOUS, RUNTIME, FILESYSTEM,pl_id, NULL);"" but his does not work... nothing happens
    {code}
    PROCEDURE FPC_COPY_REPORT (p_report_name varchar2) IS
         repid REPORT_OBJECT;
         v_rep VARCHAR2(100);
         rep_status varchar2(20);
         lv_id varchar2(1000);
    BEGIN
    repid := find_report_object('AMTP_995.RDF');
    v_rep := RUN_REPORT_OBJECT(repid);
    rep_status := REPORT_OBJECT_STATUS(v_rep);
         if rep_status = 'FINISHED' then
         message('Report Completed'); message('Report Completed');
         else
              message('Error when running report.');           message('Error when running report.');
         end if;
    END;
    {code}
    Any Help

    actually My code is this:
    declare
         ln_alert          number;
         pl_id               ParamList;
         lv_report_name varchar2(10000);
         lv_path  varchar2 (100) := 'C:\';
         lv_shared_path  varchar2(1000);
         lv_copy_file varchar2(10000);
      cursor cr_dir_path IS
      select v_dir_path
      from md_directory
      where v_dir_code ='SHR';
      lv_file_name varchar2(1000);
    BEGIN
      open cr_dir_path;
      fetch cr_dir_path into lv_shared_path;
      close cr_dir_path;
    lv_report_name :=  lv_path||:fn_cntl.nb_ref_no||'_M08600000_'||to_char(sysdate,'YYYYMMDD-HHmmss')||'.pdf';
      if ffn_check_fields  THEN
         pl_id := Get_Parameter_List('LAI');
             IF NOT Id_Null(pl_id) THEN
                 Destroy_Parameter_List( pl_id );
              END IF;             
              pl_id := Create_Parameter_List('LAI');
           if :fn_cntl.nb_report_name ='MMAT_REPORT'
                then
                     if :fn_cntl.nb_report_desc ='EXPORT'
                          then
                         Add_Parameter(pl_id, 'PARAMFORM',TEXT_PARAMETER, 'NO');
             Add_Parameter(pl_id, 'DESTYPE',  TEXT_PARAMETER,'File');
            Add_Parameter(pl_id, 'DESNAME',  TEXT_PARAMETER, lv_report_name);
            Add_Parameter(pl_id, 'DESFORMAT',TEXT_PARAMETER,'PDF');
            Add_Parameter(pl_id, 'p_mat_no',TEXT_PARAMETER, :fn_cntl.nb_mat_no);   
            Add_Parameter(pl_id, 'p_ref_no',     TEXT_PARAMETER, :fn_cntl.nb_ref_no);
            Add_Parameter(pl_id, 'p_verified_by',TEXT_PARAMETER, user);
                     Run_Product(REPORTS,:fn_cntl.nb_report_name,ASYNCHRONOUS, RUNTIME, FILESYSTEM,pl_id, NULL);
          DECLARE     
               repid REPORT_OBJECT;     v_rep VARCHAR2(100);     rep_status varchar2(20);BEGIN
                         /* REP_OBJ= REPORT OBJECT CREATED UNDER REPORT NODE AT FORM */
             repid := find_report_object('MMAT_REPORT');      v_rep := RUN_REPORT_OBJECT(repid);
                        rep_status := REPORT_OBJECT_STATUS(v_rep);          
          if rep_status = 'FINISHED' then
              message('Report Completed');          message('Report Completed');
             --copy_report_object_output(v_rep,'c:\local.pdf');
             -- host('netscape c:\tlocal.pdf');     
         else          message('Error when running report.');
                                          message('Error when running report.');     
         end if;
                 END;
         end if;
      end if;
           if :fn_cntl.nb_report_desc ='EXPORT'
                then
                  error_handler('This report will be Storde in ' ||lv_report_name||' and '||lv_shared_path|| ' Location',3);
                     lv_copy_file :='copy '||' "'||lv_report_name||'" "'||lv_shared_path||'"';
                     host(lv_copy_file,no_screen);
                  error_handler('Report Has been Generated Sucessfully.',3);
           end if;
        end if;
    END;I will try first the another solution you have replied perviously... and will let you no the results... thanks a lot...

  • How to download support packs from solution manager

    Hi Experts ,
    Please tel me the process for down loading support packages from solution manager.iam very new to this process
    How can get an approval in solution manager to down load support packages in step by step process
    Regards

    Please check: http://service.sap.com/solutionmanager -> SAP Solution Manager in Detail -> Maintenance Optimizer -> Links and Downloads.
    Kind regards,
    Mark

  • How to add a system into Solution Manager directory.

    Hi!
    Can anybody tell me how to add a system into Solution Manager directory before generating license key for ECC installation .
    Also,
    How to connect the XI in same box with SolMan and ECC in defferent server to SolMan 3.2 .
    I am going to install SolMan and than XI in and box and after that ECC in a seperate box.
    AM I right?
    regards,
    Pratip Bhattacharyya

    Hi Bratip Bhattacharyya,
    SolMan 3.2 needs SLD only for automatic data gathering of the sap landscape; you can choose between SLD and LIS in transaction SMSY_SETUP (which simply uses the TMS-domain controllers for information gathering).
    XI needs SLD, but XI needs also a netweaver04 (s) system (Abap WAS 6.40). SolMan 3.2 isn't a netweaver04 system (Abap WAS 6.20). So you have to install XI as an own central instance (Abap + Java) on the same windows server, if you like. In this case you have to install for XI an own SLD. Different SLDs can create bridges between themselves. Please look at the SLD configuration guide (quicklink /netweaver -> installation guides).
    But don't ask me how to install two sap systems on one server on windows (on Linux it's easy I have done so); basically it will have an own SID and own "service" numbers (which means own tcp port numbers).
    If you can't dedicate to XI an own server, it's only a question of hardware sizing. For the different combinations of netweaver components you should study the master guide for netweawer.
    Bye
    Message was edited by: Riccardo Escher

  • How to check the availability of a SCS-Instance

    Hi.
    We want to use HP serviceguard for our HA solution - but we do not want to pay so much money for the SAP serviceguard extensions. So we do it ourselves...
    My question: how to check the availability of the SCS-Instance on regular basis on os level?
    - is it enough to check the enqueue and message server process? I don't think so :o)
    - is it enough to check the latest entry of this file?
    /usr/sap/<SID>/SCS<SYSNR>/work/available.log
    some typical entry of this file looks like these:
    Unavailable 30.04.2009 17:03:07 - 04.05.2009 11:32:33
    Available   04.05.2009 11:33:33 - 05.05.2009 17:33:05
    Available   05.05.2009 17:35:36 - 05.05.2009 17:35:36
    Available   05.05.2009 17:37:51 - 06.05.2009 08:49:11
    Other ideas?
    Thanks for your help!
    Martin

    Hi,
    what type of script you want to run at OS level, u can check the status in MMC itself if you are using windows or u can check the status in index.html informaiton page or u can use JCMON at OS level to check the status.
    -Srini

  • How to Customize the Message "No Row Returned" from a Report

    Hi,
    I've been trying to customize the Message "No Row Returned" from a Report.
    First i followed the instructions in Note:183131.1 -
    How to Customize the Message "No Row Returned" from a Report
    But of course the OWA_UTIL.REDIRECT_URL in this solution did not work (in a portlet) and i found the metalink document 228620.1 which described how to fix it.
    So i followed the "fix" in the document above and now my output is,..
    "Portlet 38,70711 responded with content-type text/plain when the client was requesting content-type text/html"
    So i search in Metalink for the above and come up with,...
    Bug 3548276 PORTLET X,Y RESPONDED WITH CONTENT-TYPE TEXT/PLAIN INSTEAD OF TEXT/HTML
    And i've read it and read it and read it and read it and can't make heads or tails of what it's saying.
    Every "solution" seems to cause another problem that i have to fix. And all i want to do is customize the Message "No Row Returned" from a Report. Please,...does anyone know how to do this?

    My guess is that it only shows the number of rows it has retrieved. I believe the defailt is for it to only retrieve 50 rows and as you page through your report it retrieves more. So this would just tell you how many rows was retireved, but probably not how many rows the report would contain if you pages to the end. Oracle doesn't really have a notion of total number of rows until the whole result set has been materialized.

  • How to check the verity version in our PeopleSoft Installation?

    How to check the verity version in our PeopleSoft Installation? I am not sure if the verity is installed or not and also if installed what is the version?

    yes. it says the version is 5.0.1
    Is there any difference in installation or configuration when the app and web server are in same machine and when the app and web server are installed in different servers?
    ============================================
    D:\fs840\webserv\peoplesoft>mkvdk
    mkvdk - Verity, Inc. Version 5.0.1 (_nti40, Jul 23 2004)
    Usage: mkvdk [<option>...] <filespec>...
    Where <option> can be a VDK switch, or any of:
    -about Show the collection's about resources
    -autodel Delete bulk insert file when no longer needed
    -backup <dir> Specify collection backup location
    -bulk Submit bulk insert file(s)
    -charmap <name> Specify the character map to VDK
    -collection <path> Specify the collection (required)
    -create Create the collection
    -credentials <user> Specify user[:passwd][:domain][:mailbox]
    -datapath <path> Specify VDK datapath
    -datefmt <fmt> Specify date format to VDK
    -debug Enable debugging output
    -delete Delete documents
    -description <desc> Set the collection's description
    -diskcache <num> Set VDK's disk cache size (kbytes)
    -extract Extract field values from text
    -help Print this usage information
    -insert Insert documents (default)
    -locale <locale> Specify the locale to VDK
    -logfile <file> Save output in a log file
    -loglevel <num> Set the VDK output level for the log
    -mailboxes This option is depracated. Use the credentials option inste
    ad
    -maxfiles <num> Set VDK's maximum number of open files
    -maxmemory <num> Set VDK's maximum memory usage (kbytes)
    -mode <mode> Set the indexing mode
    -modify Modify fields using field/value pairs from a bulkfile
    -nohousekeep Disable housekeeping
    -noindex Disable indexing
    -nolock Turns off locking (dangerous)
    -nooptimize Disable optimizations
    -nosave Don't save collection work list
    -noservice Prevents servicing of submitted work
    -nosubmit Don't submit work to VDK
    -numdocs <num> Number of documents to insert from bulk insert file(s)
    -numpages <num> Synonym for diskcache for backward compatibility
    -offset <num> Specify offset into bulk insert file(s)
    -online Flag for online Bulk Modify
    -optimize <spec> Optimize the collection
    -outlevel <num> Set the VDK output level
    -persist Service the collection forever
    -purge Remove all documents from collection
    -purgeback Purge in the background
    -purgewait <secs> Specify delay before purge
    -quiet Suppress all non-error messages
    -repair Repair the collection
    -servlev <spec> Advanced option for overriding service level
    -sleeptime <secs> Interval between service calls for persist
    -style <dir> Specify style directory for create
    -submit Synonym for noservice for backward compatibility
    -synch Perform work synchronously
    -topicset <path> Specify VDK topic set
    -update Update documents
    -vdkhome <path> Specify VDK home
    -verbose Output more information
    -words Build word assist list
    -wordindex Build word assist index
    The <spec> for -optimize is a hyphenated string of:
    maxmerge Perform maximal merging of partitions
    squeeze Recover space from deleted documents
    vdbopt Build optimized VDB's
    spanword Create word list spanning all partitions
    ngramindex Create ngram index into spanning word list
    maxclean Really clean (not for read-write)
    readonly Make the collection read-only
    tuneup Fully optimize for read-write use
    publish Fully optimize for read-only use
    The <spec> for -servlev is a hyphenated string of:
    search Enable search and retrieval
    insert Enable adding and updating documents
    optimize Enable opportunistic collection optimization
    assist Enable building of word list
    housekeep Enable housekeeping of unneeded files
    delete Enable document deletion
    backup Enable backup
    purge Enable background purging
    repair Enable collection repair
    dataprep Same as search-index-optimize-assist-housekeep
    index Same as insert-delete
    Error: must specify collection
    mkvdk done
    D:\fs840\webserv\peoplesoft>

  • An error occurred while sending mail. The mail server responded: Administrative prohibition. Please check the message and try again.

    An error occurred while sending mail. The mail server responded: Administrative prohibition. Please check the message and try again.
    Somtimes it says it spam also......

    The error message is being generated by your email provider's server. Best to ask them what they do not like about your messages and how to solve the problem.

  • Error submitting a support message to Solution Manager

    I get an error when try to submitting a message to solution manager via portal. Can anyone explain why this error occur.
    An exception occurred while processing a request for :
    iView : pcd:portal_content/com.bc.SuperRoles/com.bc.role.solutionmanager/com.bc.rolefolder/com.bc.iview.solman
    Component Name : com.sap.portal.epsolman.EPSolman
    The exception was logged. Inform your system administrator..
    Exception id: 12:56_22/03/05_0012
    See the details for the exception ID in the log file

    Hi Ramesh. We are facing the same problems at a customer. Did you ever get an answer to your problem:
       Error submitting a support message to Solution Manager  
    Posted: Mar 22, 2005 1:59 PM       Reply      E-mail this post 
    I get an error when try to submitting a message to solution manager via portal. Can anyone explain why this error occur.
    An exception occurred while processing a request for :
    iView : pcd:portal_content/com.bc.SuperRoles/com.bc.role.solutionmanager/com.bc.rolefolder/com.bc.iview.solman
    Component Name : com.sap.portal.epsolman.EPSolman
    The exception was logged. Inform your system administrator..
    Exception id: 12:56_22/03/05_0012
    See the details for the exception ID in the log file 
    Kind regards Thomas

Maybe you are looking for

  • How do I rename a printer on MacBook Pro 10.6.8?

    How do I rename a printer on my MacBook Pro 10.6.8?

  • How to extract data from MS-Access

    Hi Experts, I have a scenario where I have to extract data from MS-Access. I'm developing a ABAP component. I looking for help in writing query for data extraction. I have no idea of extracting data form MS-Access. Have worked on BAPI and SAP tables

  • OS Upgrade for MacBook Pro 10.4.11

    Hello Apologies if this question has been asked before but I'm unsure as to the specifics of how much I'm able to upgrade my OS on my MacBookPro at the moment.  My friend's been able to download an OS upgrade from yourselves for around £26, which one

  • Adobe indesign and retina display incompatible?

    The type in my Indesign documents look fuzzy. Did some searching and found out that Indesign is not yet upgraded to meet the needs of retina display. Does anyone know if I buy a external monitor, would that solve the problem temporarily? Also, does a

  • Cursor 'HAND'

    Please help to solve the problem in forms 9i when mouse enter on a text item the cursor should be hand in forms 6i it is working fine and in 9i its not working please give me step step by guide to solve this issue. Thank you MNH