How to check the OSS note in SAP Client system ?
Hi all
I just have a small question ... how do we check whether an OSS note is applied in the SAP client System or not ?
Please let me know..
Thanks
Mallikarjun
Hi
1) One way is checking the version and support pack applied.I.e,
On the main SAP screen > Systems > Status > Check details of the "Component version".
2) STMS > Double click on the system you need to check > Check the status of your request.
Nadini
Similar Messages
-
How to check the Idocs sent from SAP system
How to check the outbound Idocs sent from SAP system to target systems.
How to know the message types and target systems.Hi,
In Addition with the above mentioned transaction code(WE02), u can check out idocs in these table - EDIDC, EDID4, EDIDS. Depending on different status you can differentiate them as Inbound or Outbound Idocs...
Cheers...
Santosh.
<i><b>Mark All Usefull Answers...</b></i> -
Need to know how to check the outbound queue in SAP for data flow into CRM
Hi Specialist's,
I have changed an entry in Customer Master Data in Sap r/3 and this change has come fine to CRM system.I checked the inbound BDOC in CRM ( Trn:SMW01) and it has come fine into CRM system.I am also able to see the affected field in CRM with new value.
I need to know how to check this from SAP side i.e. I have checked the outbound IDOC list (WE02) but could not find the record.
Is there any other way in SAP that i can check?
Also please let me know if there is any other way except IDOC in SAP to send data from R/3 to CRM?
Usefull answers will definitely be rewarded with points .
Thanks,
Abhinav.Hi Abhinav,
There are no IDOCs generated in R/3 for replication. R/3 system calls BAPI and Function modules remotely on CRM system which are part of the Adaptors provided for middleware.
Try to deregister the outbound queues in R/3 (Transaction SMQS) and see if you get an entry in the Outbound Queue (Transaction SMQ1). I have not tried this.
If you don't get any entry in the outbound queue then definitely there would be some FM at R/3 end which would be calling CRM system remotely.
<b>Reward points if it helps.</b>
Regards,
Amit Mishra -
How to Checked The Object Not Locked by Others in Transport
Hi all,
I have problem in transporting workbook to production, the question is:
a. How to Solve Object that is locked by other transport requests
b. How to Check Object Not Locked by Others Request before doing transport.
Thanks in advance
supriatnaHi Supriatna,
In the same screen where you have been 'Search for Objects in Requests/Tasks' place your cursor in one of the empty fields (the second column, eg. PROG) and look up for XLWB. You have increase the number of displayed entries in the look up screen to atleast 1000 to find the R3TR XLWB entry (Excel workbook entry).
Hope this helps.
Thanks -
How to check the ALE settings in SAP
Hello everybody,
I have a question about ALE setups.
Through ALE,a lot of data flows from one SAP system to another.Hence all these various SAP systems are maintained as logical systems and the appropriate RFC destinations are in place.
1.Now,if I wish to disable some of these recipient SAP systems ,how to go about it?
2.More importantly, I have a list SAP boxes(you can say,recipient logical systems),for which I need to check if they are still active or if they have already been disabled.
Basically,my problem is that I have a number of SAP programs which have got variants maintained ,containing these SAP boxes as partner recipient numbers as part of their variant data.Now,these variants are used to run a lot of batch jobs and I need to verify whether these mentioned partner recipient numbers are still up and active or they have been disabled while the variants never got rectified.
Please let me know as how this complete check can be made.
If any clarification regarding the problem is required,please do not hesitate to ask.
Regards
PapriHello Papri,
See below a fast overview for Application Link Enabling settings to check:
1- Are logical systems with which you want to exchange data defined ?
If not, you cannot have a RFC connection to those systems.
2- Do you have RFC R/3 connections for your logical systems (SM59) ?
If not, no transactional RFC port can be created for those RFC connections.
3- Do you have a transactional RFC port for your RFC connections (WE21) ?
If not, no parner profile can be generated for your parner type (Logical System).
4- Do you have a distribution model between systems (BD64) ?
If not, no data exchange via IDoc is possible as no partner profiles LS (WE20) are generated and no model view is distributed.
So, according to your point:
1- only one logical system can be reached by RFC connection. It is not possible for others,
2- that's why you have partner profile not being active,
3- so, RFC connection is no longer active for logical system is this situation.
Just one thing regarding those sentences from your first post:
>(...)
> Basically,my problem is that I have a number of SAP programs which have got variants maintained ,containing these SAP boxes as partner recipient numbers as part of their variant data.
>Now,these variants are used to run a lot of batch jobs and I need to verify whether these mentioned partner recipient numbers are still up and active or they have been disabled while the variants never got rectified.
> (...)
As those partners (logical systems) are not defined, you should have a DUMP for those jobs.
It is not the case ?
Regards.
Laurent. -
How to check ip address of concurrent SAP users?
Hi All,
I can check the host name of concurrent user at MS SQL Server Management Studio 2005 \ Management \ SQL Server Logs \ Activity Monitor
Anybody knows how to check the ip address of SAP concurrent users?
Thanks in Advance,
Vivian ChanYou may try run SP_who2 under you query manager to see.
Thanks,
Gordon -
How to export &import the OSS note?
Hi Team?
How to export &import the OSS note?Dear Jagadish,
Download SAP Notes from the SAP Service Marketplace and upload them in Note Assistant.
Start Note Assistant (transaction SNOTE).
Download the SAP Note from SAPNet - R/3 Frontend. To do this, choose "SAP Note Download" (Ctrl + F8) and enter the relevant SAP Note number. The downloaded SAP Note appears in your worklist under the category New.
Read the SAP Note!
Check whether the SAP Note entails manual activities. (See also answers to questions concerning ABAP Dictionary objects and messages.)
If this is the case, first perform the manual activities.
Implement the SAP Note. To do this, choose Implement SAP Note. During implementation, Note Assistant may download prerequisite SAP Notes that must be implemented before.
Also read and check the prerequisite notes! This is necessary, since they may also contain manual activities. If you don´t do this, the syntax check can bring up an error of the relevant field of the function module, for example.
Reward points if it helps.
Regards,
Naveen. -
How to open a trouble ticket/OSS note with SAP - Very Urgent
Hi Gurus,
I have the Logon and the password.
1)How to open a trouble ticket/OSS note with SAP.
Thanks
SimmiHi,
You could login to service.sap.com/inbox and then create a customer message using message wizard and send this to SAP. You can prioratize the ticket accordingly.
Sriram -
Can anyone tell me how to check the balance on an iTunes gift card that is not yet scratched?
Can anyone tell me how to check the balance on an iTunes gift card that is not yet scratched or activated?
If it's not printed on the card, then you'll need to check the receipt from the purchase of the card. There's no way to check the value from the card itself without redeeming it.
Regards. -
How to check the current EHP stack level? in SAP
Dear All,
How to check the current EHP stack level? in SAP . i have checked forum before i am posting but still comfused .
same one said SAP_APPL , EA_Appl and SAP _HR is 60n if n=1.2.3.4. if n =1 is enhanced package 1 similarly 2,3,4 .
some one said SAP_BASIS 701,702,703,704 . according ehp1,2,3,4.
Pls check the details and confirm either is ehp1 or ehp4 .
Component version is simply shows SAP ECC 6.0 in system -> status.
Software Component - Release - SP level
SAP_ABA 701 0007
SAP_BASIS 701 0007
PI_BASIS 701 0007
ST-PI 2008_1_700 0003
SAP_BS_FND 701 0008
SAP_BW 701 0007
SAP_AP 700 0021
WEBCUIF 700 0008
SAP_APPL 604 0008
SAP_HR 604 0029
SAP_HRCAR 604 0029
SAP_HRCAT 604 0029
SAP_HRCAU 604 0029
SAP_HRCBE 604 0029
SAP_HRCBR 604 0029
SAP_HRCCA 604 0029
SAP_HRCCH 604 0029
SAP_HRCCL 604 0029
SAP_HRCCN 604 0029
SAP_HRCDE 604 0029
SAP_HRCDK 604 0029
SAP_HRCES 604 0029
SAP_HRCFI 604 0029
SAP_HRCFR 604 0029
SAP_HRCGB 604 0031
SAP_HRCHK 604 0029
SAP_HRCID 604 0029
SAP_HRCIE 604 0029
SAP_HRCIN 604 0029
SAP_HRCIT 604 0029
SAP_HRCJP 604 0029
SAP_HRCKR 604 0029
SAP_HRCMX 604 0029
SAP_HRCMY 604 0029
SAP_HRCNL 604 0029
SAP_HRCNO 604 0029
SAP_HRCNZ 604 0029
SAP_HRCPH 604 0029
SAP_HRCPT 604 0029
SAP_HRCRU 604 0029
SAP_HRCSE 604 0029
SAP_HRCSG 604 0029
SAP_HRCTH 604 0029
SAP_HRCTW 604 0029
SAP_HRCUN 604 0029
SAP_HRCUS 604 0029
SAP_HRCVE 604 0029
SAP_HRCZA 604 0029
SAP_HRGXX 604 0029
SAP_HRRXX 604 0029
EA-IPPE 400 0018
EA-APPL 604 0008
EA-DFPS 600 0018
EA-FINSERV 604 0007
EA-GLTRADE 604 0008
EA-HR 604 0029
EA-HRCAR 604 0029
EA-HRCAT 604 0029
EA-HRCAU 604 0029
EA-HRCBE 604 0029
EA-HRCBR 604 0029
EA-HRCCA 604 0029
EA-HRCCH 604 0029
EA-HRCCN 604 0029
EA-HRCDE 604 0029
EA-HRCDK 604 0029
EA-HRCES 604 0029
EA-HRCFI 604 0029
EA-HRCFR 604 0029
EA-HRCGB 604 0029
EA-HRCHK 604 0029
EA-HRCID 604 0029
EA-HRCIE 604 0029
EA-HRCIN 604 0029
EA-HRCIT 604 0029
EA-HRCJP 604 0029
EA-HRCKR 604 0029
EA-HRCMX 604 0029
EA-HRCMY 604 0029
EA-HRCNL 604 0029
EA-HRCNO 604 0029
EA-HRCNZ 604 0029
EA-HRCPH 604 0029
EA-HRCPT 604 0029
EA-HRCRU 604 0029
EA-HRCSE 604 0029
EA-HRCSG 604 0029
EA-HRCTH 604 0029
EA-HRCTW 604 0029
EA-HRCUN 604 0029
EA-HRCUS 604 0029
EA-HRCVE 604 0029
EA-HRCZA 604 0029
EA-HRGXX 604 0029
EA-HRRXX 604 0029
EA-PS 604 0007
EA-RETAIL 604 0007
FINBASIS 604 0008
ECC-DIMP 600 0018
ERECRUIT 604 0008
FI-CA 604 0008
FI-CAX 604 0007
INSURANCE 600 0018
IS-CWM 600 0018
IS-H 600 0024
IS-M 600 0018
IS-OIL 600 0018
IS-PS-CA 604 0007
IS-UT 600 0018
LSOFE 600 0018
SEM-BW 604 0008
ST-A/PI 01M_ECC600 0001
Regards
Edited by: satheesh0812 on Nov 17, 2011 7:57 AMHi Sateesh,
SAP_ABA 701 0007
SAP_BASIS 701 0007
PI_BASIS 701 0007
ST-PI 2008_1_700 0003
SAP_BS_FND 701 0008
SAP_BW 701 0007
SAP_AP 700 0021
WEBCUIF 700 0008
SAP_APPL 604 0008
Based on the component information provided by you, I can conclude that your system is ECC 6.0 EHP4.
EHP4 is derived from your component SAP_APPL 604.
In addition to this your EHP4 system has NW stack on NW 7.0 EHP1.
Hence your system is ECC 6.0 EHP4 with NW 7.0 EHP1.
Hope this answers your query.
Regards,
Deepak Kori -
In iphoto how to get the gold you delete a photo warning message when you check the box not ask
in iphoto how to get the gold you delete a photo warning message when you check the box not ask
Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7 or later: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101. -
Despite checking the "Do not import suspected duplicates"box, Lr4 still did re-import hundreds of photos from the same exact card they were imported from originally. Anyone know what I should do differently next time?
The problem with duplicate detection is that, as far as I can tell, Lightroom is using details it discovers about the file being imported (examining EXIF data and file stats) and what is already in the catalog. Unless it finds an exact match for all parameters, the file is not considered a duplicate. From my own experience, if Lightroom decides a file is a duplicate it is nearly always correct. However, when it misses, it really misses. I have not read anywhere that Lightroom is building and storing a hash count which would make the process more accurate. I also suspect that the search for duplicates is when you are importing a set of photos from one location (a memory card for example) and storing them into the same folder all the time. So, if you take a memory card and import all the photos into Folder_X and then later try and import the same photos into Folder_X again, Lightroom will catch that they are duplicates. But, if you were to import that same group of photos into Folder_Y, Lightroom will not catch it indicating the comparison is not catalog wide. I am not sure how to influence this behavior and it is not anything you did wrong or failed to do. It just is the way it is...
-
How to check the DTP status (i.e in active mode or not) for the Prior days.
Hi SAP gurus,
How to check the DTP status whether it was in active mode or inactive mode for the prior days ?Hi Aditya,
Kindly have a look into below links,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00dbbfa9-dba2-2d10-bc80-9d6489e4b1c7?QuickLink=index&overridelayout=true
DTP request Overall status
Hope this helps.
Regards,
Mani -
How to check the Customizing setting in Different SAP CRM System
Hello Guru's
I want to know how to check the Customizing setting in Different system i.e (Sandbox,Development,Quality,Production)
I mean to say that i was to check all the 4 system are in same line in all the aspects or sink with each orther
Thanks in advance
With Regards
Sreeramhi
to synchronise all the clients in the CRM,u need to structure ur transport request,that is whenever a request has been made,the same has been transported to all the clients or not
Go to T-Code -SE09 and copy all released transport request from each client from Sandbox,Development,Quality,Production and match all request manually.
this is just a way other may be to see manually all the settings in all the clients
best regards
ashish -
How to implement an OSS Note if you only know the key??
Hi,
I wanted to know if we can implement an OSS NOte if we only know the SSCR key.
Any help will be appreciated.Hi,
You can implement an OSS note through transaction SNOTE.
Just download the OSS note from SNOTE and it will automatically be inserted in the standard code.
If you are not able to download the note check for the note correction given.
Implement the note correction in the standard program after getting access key.
Regards,
Subhashini
Maybe you are looking for
-
After 3 Palm PDAs, I was excited to get a Palm Centro. In the first 30 days it became obvious battery life was horrible. Best Buy swapped first the battery, then the entire device. After that they referred me to AT&T who swapped the phone and at l
-
N95(not 8G) KEEPS ASKING TO REMOVE MEMORY CARD
I bought my N95(not 8G) about 4 months ago(second hand) and about 2 months after I bought it I started getting a message saying ,please remove memory card and press ok. It didn't come with a memory card so I fitted one from my old Nokia 6110(1gig)
-
Hie experts, i got a very confusing error that i still unable to solve. I've tried to read some of the threads in here but i already try most of them but still does not work.. Anyone know how to explain actually what happen with this error and how i
-
Portlets for e-mail integration?
During OOW2000, Oracle-staff giving presentations mentioned the development of portlets for integration with e-mail systems (like Lotus Notes and Microsoft Exchange). Technical staff at the campgrounds said that this functionality was close to releas
-
Just trying to install the google ecom tracking code supplied by google. It does some nice things like the actual ROI depending on pay per click word chosen. Ive never had to output cold fusion varibles beofre within javascript. Do i need to use use