How to check the rebate settlement in detail?

if I have three billing documents
A billing should pay 3EUR for rebate
B billing should pay 3EUR for rebate
C billing should pay 3EUR for rebate
and I settle 6EUR
where can I find that A and B had been settled and C stilk can be settled later?

Hi zhang,
First of all the rebates will be settled based on the accruals, which comes after generating billing document. The accruals we can see in condition record( vbo2) , in that click on pay there u will find the max. amount accrued, in that u can settle the amount what ever u want. Make ensure that in agreement type u maintained partial settlement document .
regards,
ram.

Similar Messages

How to check the sales orders that have been created with an Rebate Agreeme

Dear Experts,
Do you know how to check the sales orders that have been created with an Rebate Agreements?
Thanks!!

Hi Hoo Laa,
I have one way but little lengthy.
Rebate condition always appears in the billing document.
So 1st you extract the sales order list from Table VBAK.
once you have the sales order list then you can put your order list in Table VBFA --> Extract the billing document list.
Now put that list in the table VBRK.
In VBRK you will get the "Doc. condition" --> put that doc condition in table KONV with your rebate condition type.
It will show the result.
Later, through VLOOKUP you can identify in which order you have given rebate to your customer.
Already said, Little lengthy
Regards,
MT

How to check the current EHP stack level? in SAP

Dear All,
How to check the current EHP stack level? in SAP . i have checked forum before i am posting but still comfused .
same one said SAP_APPL , EA_Appl and SAP _HR is 60n if n=1.2.3.4. if n =1 is enhanced package 1 similarly 2,3,4 .
some one said SAP_BASIS 701,702,703,704 . according ehp1,2,3,4.
Pls check the details and confirm either is ehp1 or ehp4 .
Component version is simply shows SAP ECC 6.0 in system -> status.
Software Component - Release - SP level
SAP_ABA     701     0007
SAP_BASIS     701     0007
PI_BASIS     701     0007
ST-PI     2008_1_700     0003
SAP_BS_FND     701     0008
SAP_BW     701     0007
SAP_AP     700     0021
WEBCUIF     700     0008
SAP_APPL     604     0008
SAP_HR     604     0029
SAP_HRCAR     604     0029
SAP_HRCAT     604     0029
SAP_HRCAU     604     0029
SAP_HRCBE     604     0029
SAP_HRCBR     604     0029
SAP_HRCCA     604     0029
SAP_HRCCH     604     0029
SAP_HRCCL     604     0029
SAP_HRCCN     604     0029
SAP_HRCDE     604     0029
SAP_HRCDK     604     0029
SAP_HRCES     604     0029
SAP_HRCFI     604     0029
SAP_HRCFR     604     0029
SAP_HRCGB     604     0031
SAP_HRCHK     604     0029
SAP_HRCID     604     0029
SAP_HRCIE     604     0029
SAP_HRCIN     604     0029
SAP_HRCIT     604     0029
SAP_HRCJP     604     0029
SAP_HRCKR     604     0029
SAP_HRCMX     604     0029
SAP_HRCMY     604     0029
SAP_HRCNL     604     0029
SAP_HRCNO     604     0029
SAP_HRCNZ     604     0029
SAP_HRCPH     604     0029
SAP_HRCPT     604     0029
SAP_HRCRU     604     0029
SAP_HRCSE     604     0029
SAP_HRCSG     604     0029
SAP_HRCTH     604     0029
SAP_HRCTW     604     0029
SAP_HRCUN     604     0029
SAP_HRCUS     604     0029
SAP_HRCVE     604     0029
SAP_HRCZA     604     0029
SAP_HRGXX     604     0029
SAP_HRRXX     604     0029
EA-IPPE     400     0018
EA-APPL     604     0008
EA-DFPS     600     0018
EA-FINSERV     604     0007
EA-GLTRADE     604     0008
EA-HR     604     0029
EA-HRCAR     604     0029
EA-HRCAT     604     0029
EA-HRCAU     604     0029
EA-HRCBE     604     0029
EA-HRCBR     604     0029
EA-HRCCA     604     0029
EA-HRCCH     604     0029
EA-HRCCN     604     0029
EA-HRCDE     604     0029
EA-HRCDK     604     0029
EA-HRCES     604     0029
EA-HRCFI     604     0029
EA-HRCFR     604     0029
EA-HRCGB     604     0029
EA-HRCHK     604     0029
EA-HRCID     604     0029
EA-HRCIE     604     0029
EA-HRCIN     604     0029
EA-HRCIT     604     0029
EA-HRCJP     604     0029
EA-HRCKR     604     0029
EA-HRCMX     604     0029
EA-HRCMY     604     0029
EA-HRCNL     604     0029
EA-HRCNO     604     0029
EA-HRCNZ     604     0029
EA-HRCPH     604     0029
EA-HRCPT     604     0029
EA-HRCRU     604     0029
EA-HRCSE     604     0029
EA-HRCSG     604     0029
EA-HRCTH     604     0029
EA-HRCTW     604     0029
EA-HRCUN     604     0029
EA-HRCUS     604     0029
EA-HRCVE     604     0029
EA-HRCZA     604     0029
EA-HRGXX     604     0029
EA-HRRXX     604     0029
EA-PS     604     0007
EA-RETAIL     604     0007
FINBASIS     604     0008
ECC-DIMP     600     0018
ERECRUIT     604     0008
FI-CA     604     0008
FI-CAX     604     0007
INSURANCE     600     0018
IS-CWM     600     0018
IS-H     600     0024
IS-M     600     0018
IS-OIL     600     0018
IS-PS-CA     604     0007
IS-UT     600     0018
LSOFE     600     0018
SEM-BW     604     0008
ST-A/PI     01M_ECC600     0001
Regards
Edited by: satheesh0812 on Nov 17, 2011 7:57 AM

Hi Sateesh,
SAP_ABA 701 0007
SAP_BASIS 701 0007
PI_BASIS 701 0007
ST-PI 2008_1_700 0003
SAP_BS_FND 701 0008
SAP_BW 701 0007
SAP_AP 700 0021
WEBCUIF 700 0008
SAP_APPL 604 0008
Based on the component information provided by you, I can conclude that your system is ECC 6.0 EHP4.
EHP4 is derived from your component SAP_APPL 604.
In addition to this your EHP4 system has NW stack on NW 7.0 EHP1.
Hence your system is ECC 6.0 EHP4 with NW 7.0 EHP1.
Hope this answers your query.
Regards,
Deepak Kori

Sap isu-cic(how to check the output)

HI to all......
In isu-cic how to check the output,i have done all the assign ments like framewrk creation etc...i defined the organizational structure with assign hoder...after that wats the next steps?
can anybody plz reply....
Cheers..
sateesh

Hello satish
Step 1:
Create Framework Id( assign hidden & visible components)
Step 2: Create CIC profile
Step 3: create Org unit and assign person
Step 4: Assign CIC profile to Org. unit (or) person
Path : Easy access screen
Logistics>Customer service>Customer Interaction center>Adminstration>CIC structure>Org.Structure(Change,T.code-PPOMW)>select Org. unit
In this screen on the top i.e menu bar find Go To
Go To>detail Object>Enchanced object description
Now u r in Maintain object page(T code-PP01)
Now in the Active tab page select CIC profile
Now in menu bar Edit>create infotype
Again u r in new page(T code-PP01)
Enter the CIC profile Id which u have created in customizing
Run T code- CIC0
I hope u r able to see the screen now
Rgds
Madhusudhan

How to check the unused users in portal.

Hi Guru,
We are doing auditing in Portal server.Can any tell us
How to check the unused users in portal?.
Regards,
Vivek

Use portal activity reporting for monitoring the users. This way you can monitor the users in the portal who logged on to the portal.
Below are things you can monitor from portal activity report iview
1) number of users logged on during the period of time.
2) Details of the users who logged on
3) monitoring particular iview/page
Check the below threads for more help
http://help.sap.com/saphelp_nw04s/helpdata/en/47/87329cc84a199ce10000000a42189d/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/47/87346dc84a199ce10000000a42189d/frameset.htm
Raghu

How to check the progress of statistics gathering on a table?

Hi,
I have started the statistics gathering on a few big tables in my database.
How to check the progress of statistics gathering on a table? Is there any data dictionary views or tables to monitor the progress of stats gathering.
Regds,
Kunwar

Hi all
you can check with this small script.
it lists the sid details for long running session like
when it started
when last update
how much time still left
session status "ACTIVE/INACTIVE". etc.
-- Author               : Syed Kaleemuddin_
-- Script_name          : sid_long_ops.sql
-- Description          : list the sid details for long running session like when it started when last update how much time still left.
set lines 200
col OPNAME for a25
Select
a.sid,
a.serial#,
b.status,
a.opname,
to_char(a.START_TIME,' dd-Mon-YYYY HH24:mi:ss') START_TIME,
to_char(a.LAST_UPDATE_TIME,' dd-Mon-YYYY HH24:mi:ss') LAST_UPDATE_TIME,
a.time_remaining as "Time Remaining Sec" ,
a.time_remaining/60 as "Time Remaining Min",
a.time_remaining/60/60 as "Time Remaining HR"
From v$session_longops a, v$session b
where a.sid = b.sid
and a.sid =&sid
And time_remaining > 0;
Sample output:
SQL> @sid_long_ops
Enter value for sid: 474
old 13: and a.sid =&sid
new 13: and a.sid =474
SID SERIAL# STATUS OPNAME START_TIME LAST_UPDATE_TIME Time Remaining Sec Time Remaining Min Time Remaining HR
474 2033 ACTIVE Gather Schema Statistics 06-Jun-2012 20:10:49 07-Jun-2012 01:35:24 572 9.53333333 .158888889
Thanks & Regards
Syed Kaleemuddin.
Oracle Apps DBA
Mobile: +91 9966270072
Email: [email protected]

How to check the success/failure of e-mail sending from Sharepoint?

Dear Expert,
I connect Exchange 2010 and SharePoint 2010. When user create workflow in sharepoint, it will send the email to confirm. if it's done. but I checked from user they didn't get the email. I would like to know how to check the success/failure of e-mail
sending from Sharepoint?
Thank you

By default, there is no logging mechanism in SharePoint for outgoing mails.
Mails in SharePoint are sent by giving an SMTP sever IP address in Central Administration. SharePoint never sends email directly. It relays or routes mails to the SMTP server. So, logging should be done in the SMTP server itself.
There is also another way of doing it. You can enable SMTP service of IIS for sending emails from SharePoint, which would also just relay the mails to an SMTP Server. But in this case, you can enable logging in your IIS SMTP Service. Please visit this blog
for more details.
In your case you need to check your exchange server for any failure for relaying mails.
Regards, Vikas Patel

How to check the performance of process chain.

Hi experts,
Can any one suggest me the process how to check the performance of the process chain in a graphical presentation (need detailed info on this)??
Thanks in advance.

Have a look ath this:
Process Chains Performance
Hope it helps.
Regards

CIN: How to check the material document posted without excise invoice

Hi Guru,
Please advise how to check the material document posted without excise invoice.
I have tried tcode J1I7 but it seems start to collect the excise invoice first and then material document.
But my case is to find the material document WITHOUT excise invoice for internal tracking purpose.
At the moment we start from tcode MB51 to get the list of material document and check in J_1IEXCHDR / J_1IEXCDTL
Best regards,
Pakorn

Hi,
Try creating a Query in Tcode SQVI by combining tables MKPF and J_1IEXCHDR/J_1IEXCDTL for your requirement.
Check these threads how to create Query.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6018c1ae-8c44-2d10-6ea9-c3fad2c82880?QuickLink=index&…
http://ptgmedia.pearsoncmg.com/images/9780672329029/samplechapter/0672329026_CH03.pdf
Regards
Binoy

How to check the messages in solution manager?

hai experts !
how to check the messages in solution manager?
in which transaction do we see them?

Hi Kiran,
From what I gather from your brief question, you are perhaps looking for CRM_DNO_MONITOR that would display all queries created from Satellite/SolMan system itself, as support messages.
If you are looking for Notifications underlying those messages, please look for DNOTIFWL.
For more specific answers, please provide more description of what you are looking for.
Trust this helps.
Regards,
Srini

How to check the verity version in our PeopleSoft Installation?

How to check the verity version in our PeopleSoft Installation? I am not sure if the verity is installed or not and also if installed what is the version?

yes. it says the version is 5.0.1
Is there any difference in installation or configuration when the app and web server are in same machine and when the app and web server are installed in different servers?
============================================
D:\fs840\webserv\peoplesoft>mkvdk
mkvdk - Verity, Inc. Version 5.0.1 (_nti40, Jul 23 2004)
Usage: mkvdk [<option>...] <filespec>...
Where <option> can be a VDK switch, or any of:
-about Show the collection's about resources
-autodel Delete bulk insert file when no longer needed
-backup <dir> Specify collection backup location
-bulk Submit bulk insert file(s)
-charmap <name> Specify the character map to VDK
-collection <path> Specify the collection (required)
-create Create the collection
-credentials <user> Specify user[:passwd][:domain][:mailbox]
-datapath <path> Specify VDK datapath
-datefmt <fmt> Specify date format to VDK
-debug Enable debugging output
-delete Delete documents
-description <desc> Set the collection's description
-diskcache <num> Set VDK's disk cache size (kbytes)
-extract Extract field values from text
-help Print this usage information
-insert Insert documents (default)
-locale <locale> Specify the locale to VDK
-logfile <file> Save output in a log file
-loglevel <num> Set the VDK output level for the log
-mailboxes This option is depracated. Use the credentials option inste
ad
-maxfiles <num> Set VDK's maximum number of open files
-maxmemory <num> Set VDK's maximum memory usage (kbytes)
-mode <mode> Set the indexing mode
-modify Modify fields using field/value pairs from a bulkfile
-nohousekeep Disable housekeeping
-noindex Disable indexing
-nolock Turns off locking (dangerous)
-nooptimize Disable optimizations
-nosave Don't save collection work list
-noservice Prevents servicing of submitted work
-nosubmit Don't submit work to VDK
-numdocs <num> Number of documents to insert from bulk insert file(s)
-numpages <num> Synonym for diskcache for backward compatibility
-offset <num> Specify offset into bulk insert file(s)
-online Flag for online Bulk Modify
-optimize <spec> Optimize the collection
-outlevel <num> Set the VDK output level
-persist Service the collection forever
-purge Remove all documents from collection
-purgeback Purge in the background
-purgewait <secs> Specify delay before purge
-quiet Suppress all non-error messages
-repair Repair the collection
-servlev <spec> Advanced option for overriding service level
-sleeptime <secs> Interval between service calls for persist
-style <dir> Specify style directory for create
-submit Synonym for noservice for backward compatibility
-synch Perform work synchronously
-topicset <path> Specify VDK topic set
-update Update documents
-vdkhome <path> Specify VDK home
-verbose Output more information
-words Build word assist list
-wordindex Build word assist index
The <spec> for -optimize is a hyphenated string of:
maxmerge Perform maximal merging of partitions
squeeze Recover space from deleted documents
vdbopt Build optimized VDB's
spanword Create word list spanning all partitions
ngramindex Create ngram index into spanning word list
maxclean Really clean (not for read-write)
readonly Make the collection read-only
tuneup Fully optimize for read-write use
publish Fully optimize for read-only use
The <spec> for -servlev is a hyphenated string of:
search Enable search and retrieval
insert Enable adding and updating documents
optimize Enable opportunistic collection optimization
assist Enable building of word list
housekeep Enable housekeeping of unneeded files
delete Enable document deletion
backup Enable backup
purge Enable background purging
repair Enable collection repair
dataprep Same as search-index-optimize-assist-housekeep
index Same as insert-delete
Error: must specify collection
mkvdk done
D:\fs840\webserv\peoplesoft>

Can anyone tell me how to check the balance on an iTunes gift card that is not yet scratched?

Can anyone tell me how to check the balance on an iTunes gift card that is not yet scratched or activated?

If it's not printed on the card, then you'll need to check the receipt from the purchase of the card. There's no way to check the value from the card itself without redeeming it.
Regards.

How will check the space taken by a single table in a tablespace ?

How will check the space taken by a single table in a tablespace ?
dba_segments is giving the same values even if I truncate the table?
Pls reply

I need to know how can we find out the size of the table in the tablespace.use user_segments (bytes) column.
How much bytes it has taken ?value from user_segments, bytes column
If u delete records will the space be used for another table in same tablespace?No, it keep the space in the same table for future usage.
How can we free that space ?truncate or drop the table and reduce the size from tablespace, if you want to reclaim the space from the tablespace, OS level.
Jaffar

How to check the resolution of a pdf file using Acrobat 9 pro?

How to check the resolution of a pdf file using Acrobat 9 pro?

PDF files don't have one resolution, but may have none or many different resolutions, one per image. You can check the maximum/minimum resoluion with preflight in Acrobat Pro, but not in Adobe Reader.

How to check the format (PAL or NTSC) of a DVD?

I wonder if someone can tell me how to check the format (PAL or NTSC) of DVD’s that I receive from my friends around the world. Many of them have no marking as to the format... Is there some software that can do this?

Hello Peace Freak,
have a look at myDVDedit (http://www.mydvdedit.com). It's actually designed to do postproduction on a DVD, but will also display a lot of info, such as TV standard, 16:9 vs. 4:3, etc.
Insert your DVD, then launch myDVDedit and open the VIDEO_TS folder contained in your DVD. Click the IFO tab to find the information you're looking for.
hope this helps
mish

How to check the rebate settlement in detail?

Similar Messages

Maybe you are looking for