How to check the tran code for specific activity.
Hello friends ,
could you please let me know how to check the tran code for specific activity . AS in table , i can check , what transaction does what ? But now i need to check the transaction for specific activity .
E.g , For Administrator workbench , there is transcation like RSA1 .
thanks in advance
Regards
Hi,
try the TSTC table with SE16.
Hope it helps,
MG
Similar Messages
-
How to display the 'language code' for language dependent 'Short text' ?
Hi,
I am new to BW.
Can somebody help me with the following issue?
I have an attribute 'Material category description' and I chose short text exists and made it language dependent. I had loaded the master data successfully.
Now I want to know how to check the 'language code' for this material category description. When I display the data, will the language code display by defalult?
I had checked the text table using SE11
It displays the following fields over there.
/BIC/TS1_MCT_DS [ /BIC/TS1(InfoObject name) ]
LANGU
TXTSH
I appreciate your help!
Thank you
SekharDinesh,
I went to RSD1 -> info-object -> Master Data/text tab. It shows my language selections there (Short text selected, language time dependent etc.) with everything grayed out.
In SE16, I could display the data in the following format.
/BIC/ST_PRID TXTSH TXTMD
P01 umbrella rainyday
P02 tent waterproof
etc.
I want to see the 'language code' as one of the columns in this table.
Can you help me do that?
Thank you,
Sekhar -
I need to know the differnece between the Numeric Limit Test between the TestStand version 3.0 to 3.1. If there is any differnec in the source code how to find it out? If somebody has the code can you share it?
Thanks,
JeyanHi,
I don't believe there are any differences between the two versions. But you can check the source code for the Numeric Limit Test in TestStand\Components\NI\StepTypes\CommonSubsteps. But the main part of the step is the Code Module and this bit the users supplies this.
What has prompted this question?
Regards
Ray Farmer
Regards
Ray Farmer -
How to view the source code for Native Method
hi
i am using some native methods in to my code ;
can anybody tell me how to view the source code for the same ;
nikBuy/acquire a C/C++/assembly code disassembler and run the shared library through it.
-
How to check the Statistics generated for a table through DBMS_STATS.
Hi,
How to check the statistics generated for a Table through DBMS_STATS.GATHER_TABLE_STATS procedure ?
Please let me know.
Thanks !
Regards,
RajasekharRajasekhar wrote:
Hi,
How to check the statistics generated for a Table through DBMS_STATS.GATHER_TABLE_STATS procedure ?
Please let me know.
Thanks !
Regards,
Rajasekharquery ALL_TABLES -
How to write the dynamic code for RadioGroupByKey and Check Boxes?
Hi,
Experts,
I have created a WD ABAP application in that i have used RadioGroupByKey and CheckBox Ui elements but i want how to write the dynamic code to that i want to display male and female to RadioGroupByKey and 10 lables to check boxs.
Please pass me some idea on it and send any documents on it .
Thanks in advance ,
Shabeer ahmed.Refer this for check box:
Do check :
bind_checked property is bind to a node with cardinality of 1:1
CHECK_BOX_NODE <---node name
-CHECK_BOX_VALUE <--attribute name of type wdy_boolean
put this code under your WDDOMODIFYVIEW:
DATA:
lr_container TYPE REF TO cl_wd_uielement_container,
lr_checkbox TYPE REF TO cl_wd_checkbox.
get a pointer to the RootUIElementContainer
lr_container ?= view->get_element( 'ROOTUIELEMENTCONTAINER' ).
lr_checkbox = cl_wd_checkbox=>new_checkbox(
text = 'WD_Processor'
bind_checked = 'CHECK_BOX_NODE.CHECK_BOX_VALUE'
view = view ).
cl_wd_matrix_data=>new_matrix_data( element = lr_checkbox ).
lr_container->add_child( lr_checkbox ).
Refer this for Radiobutton :
dynamic radio button in web dynpro abao
Edited by: Saurav Mago on Jul 17, 2009 10:43 PM -
How to delete the region code for country in T005U
Hello,
The region code for XX country are changed, So I have deleted all entries for that country in transaction code "OVK2" and updated the new region code which should be updated in Table T005S and T005U.
But in table T005U there are few region code for language other then EN. Now I need to delete the entries T005U for other language.
Now region code in OVK2 = Table T005S, but not equal to T005U
How language can be selected to delete the region code (TABLE T005U), please advise.
Thanks in advance.
PraveenHi Praveen,
In order to delete the entries from the language table T005U, you will have to maintain in T005S.
It means that, suppose in table T005U, you have a region appearing in two languages danish and german and the corresponding entry does not exist in T005S, then follow the steps below.
1. Maintain Region XX in EN in T005S.
2. Log on in language Danish, and in table T005U, only delete the text and log off.
3. Log on in Language German, and in table T005U, delete the text only and log off.
4. Now your T005U table is clear, log on in language EN and delete from table T005S.
5. Check both tables T005S and T005U for the region XX. they both should be empty.
Regards,
SAPFICO -
How to check the Datasource name for Virtual cube
Hello Experts,
I have a report which is built on one multiproviider for which we are getting balance sheet data reporting on company code,enduser told us that he wanted to see the data on plant level...
The problem here is that I have checked the data flow for the multiprovider,It is showing as getting data from virtual cube.
So,from there It is not showing the datasource and infosource under it(under virtual cube)..so how can I check the datasource name for it,so that I can go and enhance the datasource in case the plant(WERKS) is not there
thanks
reddyHi Friend,
go virtual cube lavel and see the data flow with "downward & upward" option in RSA1
Go to RSA1
Select the Virtual cube> right click > display data flow> select "downward & upward"
it may help you -
How to write the ABAP code for Datasource Enhancment
Hi Team,
Can you please help me how to write the code for the enhancement i have made to the standard datasource
i have added the fields ZZPayer and ZZPayer_access.
I just wanted to know how to write the ABAP code to populate the data for these fields.
Regards,
Pradeep P.Hi
From a performance point of view would like to suggest a few changes :
WHEN '<DS name>'.
select zzfields from <table> into itab
for all entries in c_t_data where <condition>.
If sy_subrc = 0.
loop at c_t_data assiging f_c_t_data.
read itab into wa_itab where key = f_c_t_data-key.
f_c_t_data-zzfield = wa-itab-zzfield.
endloop.
refresh itab.
regards,
aparna
endif. -
How to check the access right for a specific SAP object like MaterialMaster
Hi!
How can I check if I have the right to change a specific object like a material or document in SAP vie RFC. I need a remote able function which tells me, if I have enough rights! Or, if such a function does not exist, how can I write my own ABAP code to do this?
Thanks,
KonradHi,
When initiating a transaction, a system program performs a series of checks to ensure the user is authorized.
1. The program checks whether the transaction code exists in table TSTC.
2. The program checks whether the transaction code is locked by the administrator (transaction code SM01).
3. The program checks whether the user has the authority to start the transaction. Authorization object S_TCODE (transaction start) contains the authorization field TCD (transaction code). The user must have the appropriate authorization for the transaction code to be started (for example, FK01, Create Vendor).
4. The program checks whether an authorization object is assigned to the transaction code. If this is the case, the program checks whether the user has an authorization for this authorization object. The transaction code/authorization object assignment is stored in table TSTCA.
Note: An SAP program controls steps 1 through 4. It displays an automatic message to the user if an authorization attempt fails in the step.
5. The system performs authorization checks in the ABAP program using the ABAP statement AUTHORITY-CHECK.
Regards
Sudheer -
How to find the t-code for table (SM30 or SE16)
Once I create a t-code though SE93. And I choose type: Transaction with parameters. Then the Transaction is SM30,
But I forget the t-code, how do I find this t-code base on the table name.
ep:Hi
Use database table TSTCP and search for tcode with below selection criteria.
Enter *tablename* in param filed and execute.
Thanks -
How to find the transaction code for the particular program or include
Dear All,
Please help me on this queary.
1) How to find what is the transaction assigned for the particular Report
2) How to find the particular include is used in which programs and also transaction codes
I have one ZProgram that contains only includes no selection screen, I have to find where this program is used, in that one include is ther I would like to know in which program and in which transaction that is used,
They have given ME9F, ME21N/22n, wheren this includle is calling.
Please kinely help on this.
Thanks and Regards,
MuralikrishnaHI
1. you can find the transaction for your report by opening in se80. On the left side window it will show the transaction if there is any.
2. to find in which programs particular inclue is called , just open include in se38 and press where used list icon. in the pop up window select programs.
regards
vijay
reward points if helpful -
How to check the ALV output for the background job
Hi Guru,
We are having a cutomized report which will display the result like a ALV report.
We configured it as an background job, after the completion of the background job, it will send the result to the SPOOL, and we can use SP02 to check the output,
But it is not easy for user to directly check the result easily, is there an method we can save it as an spreadsheet and send the output to a specific location or mailbox and then user can check it easily
thanks,In SM37 ,select the Job > Spool > Select Spool No > Display Contents > Here it will show you the Output of the Report.Now select Ctrl +Shift + F12 , it will ask you to save the Spread sheet in specified location.
Best Regards,
Ankur -
How to view the source code for a Native Method
hi
i am using a Native method Math.pow() ;
but since it is a native method it is taking more time to execute ;
since this method i had to call at least 700 times it is affecting the performance of the application ;
so i am thinking to write the user defined method based on the logic which has been implemented in the pow() method ;
for that i need to know in which .c file this method has been written ;
or else it can not be viewed at all ( if it is in the .dll)
can u help me out
nikHi!
Here is part of StrictMath.java code.
* The class <code>StrictMath</code> contains methods for performing basic
* numeric operations such as the elementary exponential, logarithm,
* square root, and trigonometric functions.
* <p>
* To help ensure portability of Java programs, the definitions of
* many of the numeric functions in this package require that they
* produce the same results as certain published algorithms. These
* algorithms are available from the well-known network library
* <code>netlib</code> as the package "Freely Distributable
* Math Library" (<code>fdlibm</code>). These algorithms, which
* are written in the C programming language, are then to be
* understood as executed with all floating-point operations
* following the rules of Java floating-point arithmetic.
* <p>
* The network library may be found on the World Wide Web at:
* <blockquote><pre>
* http://metalab.unc.edu/
* </pre></blockquote>
* <p>
* The Java math library is defined with respect to the version of
* <code>fdlibm</code> dated January 4, 1995. Where
* <code>fdlibm</code> provides more than one definition for a
* function (such as <code>acos</code>), use the "IEEE 754 core
* function" version (residing in a file whose name begins with
* the letter <code>e</code>).
* @author unascribed
* @version 1.9, 02/02/00
* @since 1.3 -
How to display the source code for this friggin' file.
Below is a rather lengthy bit of code that provides the behavior and attributes of a web server for OpenCyc. I need to know if I can enter some java to have the HTML source code displayed in a separate text file whenever this class returns some resulting webpage. If you have any ideas it will be greatly appreciated.
-"Will code for foo."
package org.opencyc.webserver;
* Class WebServer is simple multithreaded HTTP server
* with CGI limited to a Cyc connection on default port 3600.
* <p>
import java.net.*;
import java.io.*;
import java.util.*;
import java.util.jar.*;
import java.text.*;
import org.opencyc.util.*;
public class WebServer extends Thread {
* Singleton WebServer instance.
public static WebServer current;
* Default HTTP port.
protected static int DEFAULT_PORT = 80;
* Default Cyc base port.
protected static int DEFAULT_CYC_PORT = 3600;
* Default directory to serve files from on non-Windows OS.
protected static String DEFAULT_DIR = "/";
* Default directory to serve files from on Windows.
//protected static String DEFAULT_WIN_DIR = "C:\\";
protected static String DEFAULT_WIN_DIR = "k:\\opencyc\\run\\httpd\\htdocs";
* File cache capacity.
protected static final int CACHE_CAPACITY = 100;
* File cache to improve file serving performance.
protected static Hashtable fileCache = new Hashtable(CACHE_CAPACITY);
* Number of files served from this web server.
protected static long nbrFilesServed = 0;
* Number of files served from this web server that were found in the cache.
protected static long nbrCacheHits = 0;
* Server socket for accepting connections.
protected ServerSocket server;
* Directories to serve files from.
protected ArrayList dirs;
* Map from String (jar root) to JarFile[] (jar class path).
protected HashMap map;
* Webserver HTTP port.
protected int port;
* Cyc HTML host.
protected String cycHost = "localhost";
* Cyc HTML port.
protected int cycPort;
* Expand jar tress.
protected boolean trees;
* Requests flag.
protected boolean traceRequests;
* Constructs a WebServer object.
* @param port the port to use
* @param directories the directory to serve files from
* @param trees true if files within jar files should be served up
* @param traceRequests true if client's request text should be logged.
* @exception IOException if the listening socket cannot be opened, or problem opening jar files.
public WebServer() throws IOException {
getProperties();
server = new ServerSocket(port);
processDirectories();
* Class Task processes a single HTTP request.
protected class Task extends Thread {
* Socket for the incoming request.
protected Socket sock;
* Client socket to the Cyc KB HTML server.
protected Socket cycHtmlSocket;
* Output tcp stream.
protected DataOutputStream out;
* Contains the file request path for a not-found error message.
protected String notFoundPath;
* Contains the first line of a request message.
protected String methodLine;
* Contains the body of a POST method.
protected String bodyLine;
* Constructs a Task object.
* @param sock the socket assigned for this request.
public Task(Socket sock) {
this.sock = sock;
* Processes the HTTP request.
public void run() {
if (traceRequests)
Log.current.println("connection accepted from " + sock.getInetAddress());
notFoundPath = "";
try {
out = new DataOutputStream(sock.getOutputStream());
try {
getBytes();
catch (Exception e) {
Log.current.println("file not found: " + notFoundPath);
try {
out.writeBytes("HTTP/1.1 404 Not Found\r\n");
out.writeBytes("Server: Cyc WebServer\r\n");
out.writeBytes("Connection: close\r\n");
out.writeBytes("Content-Type: text/html\r\n\r\n");
out.writeBytes("<HTML><HEAD>\n");
out.writeBytes("<TITLE>404 Not Found</TITLE>\n");
out.writeBytes("</HEAD><BODY>\n");
out.writeBytes("<H1>404 - Not Found</H1>\n");
out.writeBytes("</BODY></HTML>");
out.flush();
catch (SocketException se) {
catch (Exception e) {
Log.current.printStackTrace(e);
finally {
try {
sock.close();
catch (IOException e) {
* Reads the HTTP request and obtains the response.
* @exception IOException when HTTP request has an invalid format.
private void getBytes() throws IOException {
// Below logic is complex because web browsers do not close the
// socket after sending the request, so must parse message to find
// the end.
BufferedReader in = new BufferedReader(new InputStreamReader(sock.getInputStream()));
ArrayList inBytes = new ArrayList(200);
int ch = 0;
boolean postMethod;
methodLine = in.readLine();
//if (traceRequests)
// Log.current.println("methodLine=" + methodLine);
bodyLine = "";
if (methodLine.startsWith("POST /"))
postMethod = true;
else
postMethod = false;
//if (traceRequests)
// Log.current.println("postMethod=" + postMethod);
int ch1 = -1;
int ch2 = -1;
int ch3 = -1;
int ch4 = -1;
// Read the HTTP request headers.
while (true) {
ch = in.read();
inBytes.add(new Integer(ch));
ch1 = ch2;
ch2 = ch3;
ch3 = ch4;
ch4 = ch;
if (ch1 == '\r' && ch2 == '\n' && ch3 == '\r' && ch4 == '\n')
break;
if ((! postMethod) &&
(! in.ready()) &&
ch1 == -1 &&
ch2 == -1 &&
ch3 == '\r' &&
ch4 == '\n') {
inBytes.add(new Integer('\r'));
inBytes.add(new Integer('\n'));
break;
byte[] byteArray = new byte[inBytes.size()];
for (int i = 0; i < inBytes.size(); i++) {
Integer ich = (Integer) inBytes.get(i);
byteArray[i] = ich.byteValue();
String headers = new String(byteArray);
if (postMethod) {
String lcHeaders = headers.toLowerCase();
int i = lcHeaders.indexOf("content-length: ");
String contentLength = lcHeaders.substring(i + 16);
int j = contentLength.indexOf("\r\n");
contentLength = contentLength.substring(0, j);
int bodyLen = (new Integer(contentLength)).intValue();
for (int k = 0; k < bodyLen; k++) {
bodyLine = bodyLine + (new Character((char) in.read())).toString();
String line = methodLine + "\r\n" + headers + bodyLine;
if (traceRequests)
Log.current.println(line);
if (postMethod)
processHttpPost();
else
if (line.startsWith("GET /"))
processHttpGet(line.substring(4));
else {
Log.current.println("Invalid request = " + line);
throw new IOException();
* Processes an HTTP GET method.
* @param httpGetPath the path of the file to get.
* @exception IOException if the file is not found.
private void processHttpGet(String httpGetPath) throws IOException {
int i = httpGetPath.indexOf(' ');
if (i > 0)
httpGetPath = httpGetPath.substring(0, i);
Log.current.println(methodLine + " from " + sock.getInetAddress().getHostName());
i = httpGetPath.indexOf("cg?");
if (i > 0) {
cycHtmlRequest(httpGetPath.substring(i + 3));
return;
notFoundPath = httpGetPath;
i = httpGetPath.indexOf('/');
if (i < 0 || map == null) {
if (map == null || httpGetPath.endsWith(".jar")) {
for (int j = 0; j < dirs.size(); j++) {
String dir = (String) dirs.get(j);
String nativePath = dir + httpGetPath;
nativePath = nativePath.replace('/', File.separatorChar);
if (fileCache.containsKey(nativePath)) {
writeDataBytes((byte[]) fileCache.get(nativePath));
Log.current.println("...cached");
nbrCacheHits++;
nbrFilesServed++;
return;
try {
File f = new File(nativePath);
byte[] fileBytes = getBytes(new FileInputStream(f), f.length());
writeDataBytes(fileBytes);
if (fileCache.size() >= CACHE_CAPACITY)
fileCache.clear();
fileCache.put(nativePath, fileBytes);
Log.current.println("...from " + nativePath);
nbrFilesServed++;
return;
catch (IOException e) {
throw new IOException();
String jar = httpGetPath.substring(0, i);
httpGetPath = httpGetPath.substring(i + 1);
JarFile[] jfs = (JarFile[]) map.get(jar);
if (jfs == null)
throw new IOException();
for (i = 0; i < jfs.length; i++) {
JarEntry je = jfs.getJarEntry(httpGetPath);
if (je == null)
continue;
writeDataBytes(getBytes(jfs[i].getInputStream(je), je.getSize()));
nbrFilesServed++;
return;
throw new IOException();
* Processes an HTTP POST method.
* @exception IOException if the file is not found.
private void processHttpPost() throws IOException {
Log.current.println("POST " + bodyLine + " from " + sock.getInetAddress().getHostName());
cycHtmlRequest(bodyLine);
* Reads the specified number of bytes and always close the stream.
* @param in the file to be read for subsequent downloading.
* @param length the number of bytes to read from the file.
* @return An array of bytes from the file.
* @exception IOException if an error occurs when processing the file.
private byte[] getBytes(InputStream in, long length) throws IOException {
DataInputStream din = new DataInputStream(in);
byte[] bytes = new byte[ (int) length];
try {
din.readFully(bytes);
finally {
din.close();
return bytes;
* Sends the HTML request to Cyc.
* @param cycPath the portion of the URL which is given to the Cyc HTML server.
private void cycHtmlRequest(String cycPath) {
String request = sock.getInetAddress().getHostName() + "&" + cycPath + "#";
System.out.println("request=" + request);
ArrayList bytes = new ArrayList(10000);
try {
cycHtmlSocket = new Socket(cycHost, cycPort);
System.out.println("cycHost=" + cycHost + " cycPort=" + cycPort);
BufferedReader cycIn = new BufferedReader(new InputStreamReader(cycHtmlSocket.getInputStream()));
PrintWriter cycOut = new PrintWriter(cycHtmlSocket.getOutputStream(), true);
cycOut.println(request);
cycOut.flush();
int ch = 0;
while (ch >= 0) {
ch = cycIn.read();
bytes.add(new Integer(ch));
catch (Exception e) {
Log.current.printStackTrace(e);
byte[] byteArray = new byte[bytes.size()];
for (int i = 0; i < bytes.size() - 1; i++) {
Integer ich = (Integer) bytes.get(i);
byteArray[i] = ich.byteValue();
try {
writeTextBytes(byteArray);
catch (Exception e) {
Log.current.println(e.getMessage());
* Responds to the HTTP client with data content from the requested URL.
* @param bytes the array of bytes from the URL.
* @exception IOException if there is an error writing to the HTTP client.
public void writeDataBytes(byte[] bytes) throws IOException {
out.writeBytes("HTTP/1.1 200 OK\r\n");
out.writeBytes("Server: Cyc WebServer\r\n");
out.writeBytes("Connection: close\r\n");
out.writeBytes("Content-Length: " + bytes.length + "\r\n");
String prefix = (new String(bytes)).toLowerCase();
if (prefix.indexOf("<html>") > -1)
out.writeBytes("Content-Type: text/html\r\n\r\n");
else
out.writeBytes("Content-Type: application/java\r\n\r\n");
out.write(bytes);
out.flush();
* Respond to the HTTP client with text content from the requested URL.
* @param bytes the array of bytes from the URL.
* @exception IOException if there is an error writing to the HTTP client.
public void writeTextBytes(byte[] bytes) throws IOException {
out.writeBytes("HTTP/1.1 200 OK\r\n");
out.writeBytes("Server: Cyc WebServer\r\n");
out.writeBytes("Connection: close\r\n");
out.writeBytes("Content-Length: " + bytes.length + "\r\n");
out.writeBytes("Content-Type: text/html\r\n\r\n");
out.write(bytes);
out.flush();
* Gets properties governing the web server's behavior.
private void getProperties() {
port = DEFAULT_PORT;
String portProperty = System.getProperty("org.opencyc.webserver.port", "");
if (! portProperty.equalsIgnoreCase(""))
port = (new Integer(portProperty)).intValue();
Log.current.println("Listening on port " + port);
cycPort = DEFAULT_CYC_PORT;
String cycPortProperty = System.getProperty("org.opencyc.webserver.cycPort", "");
if (! cycPortProperty.equalsIgnoreCase(""))
cycPort = (new Integer(cycPortProperty)).intValue();
Log.current.println("Cyc connections directed to port " + cycPort);
String dirsProperty = System.getProperty("org.opencyc.webserver.dirs", "");
dirs = new ArrayList(3);
StringTokenizer st = new StringTokenizer(dirsProperty, ";", false);
while (st.hasMoreTokens()) {
String dir = st.nextToken();
dirs.add(dir);
trees = false;
String treesProperty = System.getProperty("org.opencyc.webserver.trees", "");
if (! treesProperty.equalsIgnoreCase(""))
trees = true;
traceRequests = false;
String traceRequestsProperty = System.getProperty("org.opencyc.webserver.traceRequests", "");
if (! traceRequestsProperty.equalsIgnoreCase("")) {
traceRequests = true;
Log.current.println("tracing requests");
* Adds transitive Class-Path jars to jfs.
* @param jar the jar file
* @param jfs the list of jar files to serve.
* @param dir the jar file directory.
* @exception IOException if an I/O error has occurred with the jar file.
private void addJar(String jar, ArrayList jfs, String dir) throws IOException {
Log.current.println("Serving jar files from: " + dir + jar);
JarFile jf = new JarFile(dir + jar);
jfs.add(jf);
Manifest man = jf.getManifest();
if (man == null)
return;
Attributes attrs = man.getMainAttributes();
if (attrs == null)
return;
String val = attrs.getValue(Attributes.Name.CLASS_PATH);
if (val == null)
return;
dir = dir + jar.substring(0, jar.lastIndexOf(File.separatorChar) + 1);
StringTokenizer st = new StringTokenizer(val);
while (st.hasMoreTokens()) {
addJar(st.nextToken().replace('/', File.separatorChar), jfs, dir);
* Administrative accessor method that obtains list of directories from which files are served.
public ArrayList getDirs() {
return dirs;
* Administrative method that updates the list of directories from which files are served.
public synchronized void setDirs(ArrayList dirs) throws IOException {
this.dirs = dirs;
fileCache.clear();
processDirectories();
* Administrative accessor method that obtains number of files served.
* @return The number of files served.
public long getNbrFilesServed() {
return nbrFilesServed;
* Administrative accessor method that obtains number of files served from cache.
* @return The number of files served from the cache.
public long getNbrCacheHits() {
return nbrCacheHits;
* Administrative method that clears the file cache.
public synchronized void clearFileCache() {
Log.current.println("Clearing file cache");
fileCache.clear();
nbrFilesServed = 0;
nbrCacheHits = 0;
* Processes the directories from which files are served, expanding jar trees if
* directed.
* @exception IOException if problem occurs while processing the jar files.
private void processDirectories() throws IOException {
if (dirs.size() == 0)
if (File.separatorChar == '\\')
dirs.add(DEFAULT_WIN_DIR);
else
dirs.add(DEFAULT_DIR);
Iterator directories = dirs.iterator();
while (directories.hasNext())
Log.current.println("Serving from " + directories.next());
if (trees) {
map = new HashMap();
for (int j = 0; j < dirs.size(); j++) {
String dir = (String) dirs.get(j);
String[] files = new File(dir).list();
for (int i = 0; i < files.length; i++) {
String jar = files[i];
if (!jar.endsWith(".jar"))
continue;
ArrayList jfs = new ArrayList(1);
addJar(jar, jfs, dir);
map.put(jar.substring(0, jar.length() - 4), jfs.toArray(new JarFile[jfs.size()]));
* Provides the command line interface for creating an HTTP server.
* The properties are:
* <pre>
* org.opencyc.webserver.port=<HTTP listening port>
* </pre>
* which defaults to 80.
* <pre>
* org.opencyc.webserver.cycPort=<Cyc connection port>
* </pre>
* which defaults to 3600.
* <pre>
* org.opencyc.webserver.dirs=<path>;<path> ... ;<path>
* </pre>
* with the argument enclosed in quotes if any path contains an
* embedded space.
* The default directory on Windows is C:
* and the default on other systems is / the default
* can be overridden with this property. By default, all files
* under this directory (including all subdirectories) are served
* up via HTTP. If the pathname of a file is <var>path</var> relative
* to the top-level directory, then the file can be downloaded using
* the URL
* <pre>
* http://<var>host</var>:<var>port</var>/<var>path</var>
* </pre>
* Caching of file contents is performed.
* <pre>
* org.opencyc.util.log=all
* </pre>
* If the all value is given, then all attempts to download files
* are output.
* <pre>
* org.opencyc.webserver.traceRequests
* </pre>
* If this property has any value, then the client HTTP requests are
* output.<p>
* <pre>
* org.opencyc.webserver.trees
* </pre>
* This property can be used to serve up individual files stored
* within jar files in addition to the files that are served up by
* default. If the property has any value, the server finds all jar files
* in the top-level directory (not in subdirectories). For each
* jar file, if the name of the jar file is <var>name</var>.jar, then any
* individual file named <var>file</var> within that jar file (or within
* the jar or zip files referenced transitively in the Class-Path manifest
* attribute, can be downloaded using a URL of the form:
* <pre>
* http://<var>host</var>:<var>port</var>/<var>name</var>/<var>file</var>
* </pre>
* When this property has any value, an open file descriptor and cached
* information are held for each jar file, for the life of the process.
* @param args an unused array of command line arguments.
public static void main(String[] args) {
Log.makeLog();
System.out.println("OpenCyc Web Server");
try {
// Launch thread to accept HTTP connections.
current = new WebServer();
current.start();
catch (IOException e) {
e.printStackTrace();
* Just keep looping, spawning a new thread for each incoming request.
public void run() {
try {
while (true) {
// Launch thread to process one HTTP request.
new Task(server.accept()).start();
catch (IOException e) {
e.printStackTrace();JLundan,
I want to thank you for responding to the thread I started on the forum at java.sun.com. Your solution to my problem of needing to print the code of the html pages that the file I included generates was just what I was looking for. However, I have some further questions to ask, if you don't mind. To clarify my task I should say that your rephrasing of the problem is accurate: "You wan't to display the contents of the HTML file that the web server produces in response of client's request?"
Yes, this is what I need to do, but also it needs to display the source code of that html file that the server produces in response to the client's request. Also, in this case, I am the client requesting that the server return some html file, and I'm not sure where the server is. But the webserver.java file that I shared on the forum is on my local machine. I was wondering if I could modify this webserver.java file at my home so that any html file the server returns to me would automatically display the source code. This is a school project of mine and I am stuck on this one thing here.
Further, where would I put the "foo.html" file so it can be written to?
FileOuputStream fos = new FileOutputStream("foo.html");
fos.write(bytes);
fos.close();
Thanks so much for your help. I look forward to your response, at your convenience.
Regards
Maybe you are looking for
-
How do i clear the qRFC queue in a R/3 sandbox
Hi All, I just built a R/3 4.7B sandbox and we are going to perform an upgrade on it. But before we do that we need to clear the qRFC queue. Can anyone please let me know as to how i go about in clearing the qRFC queue. Thanks Anil
-
Every time I try to use pages I cloud is "off" in settings. I turn it on and go to pages only to find it turned "off" again.
-
Easier Keyboard Tab Switching...
So I've read this: http://discussions.apple.com/thread.jspa?messageID=6886495� Now, while CmdShift [ (or ]) is really neat as a way to switch tabs I would really prefer something I can do with one hand to leave my right free for the mouse (or
-
Re: How to play the remote shared audio file by JMF?
did u connect from the client host to the remote host.(use ping to test it)? if the test is ok, test the palyer by playing file in ur client host?
-
When I plug in my I-pod Nano I get an error message
My I-pod will not charge and there is an error mesaage saying "Unsupported Accessory is not supported"