How to check the VXML Port utilisation in CVP
Hi,
Currently we are using 300 VXML Ports but while monitoring the Active Call in Operational Console
it is showing 300 + Active calls in the VXML Server.
Please kindly help me to findout why Active calls status is showing mor than 300 +.
Regards,
A.Pravin Raj
You can check VXML port Utilization by running status.bat file , it will show you the exact ports usage & it will also displays on which application how many callers are.
c:/Cisco/CVP/VXMLServer/admin
Similar Messages
-
How to check the port status in IPSec VPN
Hi Experts,
Is there any way by which we can find that the UDP port 500 is blocked at ISP side.
My IPSec VPN configured between two cisco router in production network is not coming up and experts are saying that the ISP has blocked the port 500 somewhere in between, however ISP denying and saying that they dont block any port.
kindly suggest what whould be the best wayout?
ThanksThanks Marvin,
How could I capture the traffic from initiating peer so that I can figure out that UDP port 500 is blocked or not, with the help of wireshark...
In my network ONT/Modem (having four ethernet port) is installed at both the end and from one of its port the router is connected at each side and IPSec VPN is configured between the router. to check the UDP port status, my question is, should i connect my laptop (running with wireshark) with one of the port of ONT and capture the traffice or is there any other way and how that traffice will tell me that port 500 is blocked or not? -
How to set the debug port for Eclipse for OracleAS 10g Enterprise
Hello All,
I am using OracleAS 10g Enterprise, and using dcmctl to startup the server.
But i do not know how to set the debug port in the startup script for debugging with Eclipse.
I have tried to add the following options to the dcmctl.bat, but still failed:
-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=4000
i.e in the dcmctl.bat script:
set jvmargs=-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=4000
set ex=%ohome%\jdk\bin\java -Djava.net.preferIPv4Stack=true %jvmargs%
Do anyone know how to configure the debug port setting?
Thank you for your great help!.Hi, have you double checked that your oc4j is started with Sun's JVM or any other JVM that recognizes the kind of remote debug option as above? You can find the JVM used by oc4j in the ORACL_HOME/opmn/conf/opmn.xml.
To double check that your oc4j is started in debug mode, you can test with another remote debugger. Say, with the jdb in sun's jdk jdb -connect com.sun.jdi.SocketAttach:hostname=yourHost,port=4000 (Personally, I also use Jdeveloper or Jswat to double check.) If you can connect with jdb, then you have to check your Eclipse. Can its remote debugger connect to any java application at all? -
How to open the comm ports?
Hi,
im using javacomm to detect my comm ports.i have two serial
and a parallel port (com1,com2 and LPT1) but it found no ports and throws
as follows,
found: javax.comm.CommPortEnumerator@e83912
found: 0 open ports
i placed .properties file in ..\jdk1.5.0\jre\lib
comm jar file in ..\jdk1.5.0\jre\lib\ext
and WIN32COM.DLL in ..jre\bin
am i doing right?
Here is the code,
import javax.comm.CommPortIdentifier;
import javax.comm.SerialPort;
import javax.comm.PortInUseException;
import java.util.Enumeration;
import java.util.Vector;
public class TestEnumeration {
public static void main(String args[]) {
Vector portslist = TestEnumeration.getAvailableSerialPorts();
System.out.println("found: "+portslist.size()+" open ports");
public static Vector getAvailableSerialPorts() {
CommPortIdentifier pId=null;
SerialPort sPort=null;
Enumeration pList=null;
boolean foundport=false;
pList = CommPortIdentifier.getPortIdentifiers();
String port=null;
Vector ports=new Vector();
if(!pList.hasMoreElements()) {
System.out.println("found: "+pList);
return ports;
while (pList.hasMoreElements()) {
pId = (CommPortIdentifier) pList.nextElement();
if (pId.getPortType() == CommPortIdentifier.PORT_SERIAL) {
foundport=true;
try {
sPort = (SerialPort)pId.open("serialport", 1000);
} catch (PortInUseException e) {
foundport=false;
System.out.println(pId.getName()+ " is closed");
} finally {
if(sPort!=null) {
try { sPort.close(); } catch(Exception e) {}
if(foundport) {
ports.add(pId.getName());
System.out.println(pId.getName()+ " is open");
return ports;
please help me on how to open the comm ports..Try this, It workd for me. Before doing this make sure you have serial ports on you r computer by following these steps:
open "regedit"
go to "HKEY_LOCAL_MACHINE" > HARDWARE > DEVICEMAP
and check if there is any serial ports. If htere is any, then use following program to enumerate throught the ports:
class SimpleRead() {
portList = CommPortIdentifier.getPortIdentifiers();
while (portList.hasMoreElements()) {
portId = (CommPortIdentifier) portList.nextElement();
if (portId.getPortType() == CommPortIdentifier.PORT_SERIAL) {
if (portId.getName().equals(defaultPort)) {
System.out.println("Found port: "+defaultPort);
portFound = true;
SimpleRead reader = new SimpleRead();
if (!portFound) {
System.out.println("port " + defaultPort + " not found.");
} -
How to check the load balancing in Oracle 11gR2 2 node RAC
Dear All,
Can any one please assist me how to check whether the incoming connections are evenly distributing across the nodes..?
We have two nodes, when we check the sessions counts in both nodes, Most of the time we could see node -1 has more no of sessions than node-2..? So just wanted to know whether load balancing is happening or not ...? If not how to enable it and distribute the incoming connections evenly..?
Oracle 11gR2 / RHEL5SQL> select inst_id,count(*) from gv$session where username is not null group by inst_id;
INST_ID COUNT(*)
1 43
2 40
Not sure how to check the users are connecting through scan or not ..? But below are scan setttings...
SQL> !srvctl config scan_listener
SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521
SCAN Listener LISTENER_SCAN2 exists. Port: TCP:1521
SCAN Listener LISTENER_SCAN3 exists. Port: TCP:1521
SQL> !srvctl status scan_listener
SCAN Listener LISTENER_SCAN1 is enabled
SCAN listener LISTENER_SCAN1 is running on node za-rac-prd-02
SCAN Listener LISTENER_SCAN2 is enabled
SCAN listener LISTENER_SCAN2 is running on node za-rac-prd-01
SCAN Listener LISTENER_SCAN3 is enabled
SCAN listener LISTENER_SCAN3 is running on node za-rac-prd-01
SQL> !srvctl config scan
SCAN name: rac_prd.abc.local, Network: 1/10.100.130.0/255.255.255.192/eth6.64
SCAN VIP name: scan1, IP: /rac_prd.abc.local/10.100.130.55
SCAN VIP name: scan2, IP: /rac_prd.abc.local/10.100.130.54
SCAN VIP name: scan3, IP: /rac_prd.abc.local/10.100.130.53
SQL> -
How to find the listener port on windows?
Hi Friends,
We have a client who is still using Oracle 8.0.6 on NT 4.0
I have a laptop with oracle client 10g.
I want to connect to the NT database to check it.
How do I know what port does the listener used ? what is the command to run at the c:\ command prompt?
I tried> c:\ lsnrctl stat but the command is not recognized
I tried to find the lsnrctl and bin but there is not.
Please help
Thanks a lotytterp2009 wrote:
Please help.. and please do NOT post [duplicate posts|http://forums.oracle.com/forums/thread.jspa?threadID=935282&tstart=0]
How to find the listener port on windows?The Internet Protocol stack comes with a number of utilities - one of these, called netstat, is very useful to determine which processes are doing what to which IP ports on that platform. Unfortunately, different flavours are implemented. So the Windows one does not support the parameters and output than the Unix/Linux one.
You can use the following on Windows (run it via a command console) to see what processes are listening on what address and port number:
c:\> netstat -n -a -p tcp
-n = display IP addresses and ports in numeric format
-a = list all ports (including ones used for listening
-p tcp = only display protocol entries for TCP An Oracle listener entry should look something as follows:
Proto Local Address Foreign Address State
TCP 0.0.0.0:1521 0.0.0.0:0 LISTENINGSeeing IP +0.0.0.0+ means that the Listener is accepting connections on all your network interfaces - which is standard. The port number is typically 1521. The foreign address is meaningless for a port in listening state.
PS. Why not simply check the listener.ora configuration file? Because what is actually happening may not be what you thought you configured to happen.. -
How to change the default port of webdispatcher
Hello Everyone,
We wish to know to how to change the default port of SAP webpatcher port from 81$$ to 80.
Appreciate your response.
Thanks,
VadiHello Vadi
you have to change the PORT value in your profile parameter from 81$$ to 80
icm/server_port_0 = PROT=HTTP,PORT=81$$ to
icm/server_port_0 = PROT=HTTP,PORT=80
Also, in SMICM, then change http service port and activate it and above parameter will require SAP restart
$$ is used generally to accomodate multiple port services running in SMICM and so as to avoid the parameter setting according to instance number of any system.
thanks
Bhudev -
CIN: How to check the material document posted without excise invoice
Hi Guru,
Please advise how to check the material document posted without excise invoice.
I have tried tcode J1I7 but it seems start to collect the excise invoice first and then material document.
But my case is to find the material document WITHOUT excise invoice for internal tracking purpose.
At the moment we start from tcode MB51 to get the list of material document and check in J_1IEXCHDR / J_1IEXCDTL
Best regards,
PakornHi,
Try creating a Query in Tcode SQVI by combining tables MKPF and J_1IEXCHDR/J_1IEXCDTL for your requirement.
Check these threads how to create Query.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6018c1ae-8c44-2d10-6ea9-c3fad2c82880?QuickLink=index&…
http://ptgmedia.pearsoncmg.com/images/9780672329029/samplechapter/0672329026_CH03.pdf
Regards
Binoy -
How to check the messages in solution manager?
hai experts !
how to check the messages in solution manager?
in which transaction do we see them?Hi Kiran,
From what I gather from your brief question, you are perhaps looking for CRM_DNO_MONITOR that would display all queries created from Satellite/SolMan system itself, as support messages.
If you are looking for Notifications underlying those messages, please look for DNOTIFWL.
For more specific answers, please provide more description of what you are looking for.
Trust this helps.
Regards,
Srini -
How to check the verity version in our PeopleSoft Installation?
How to check the verity version in our PeopleSoft Installation? I am not sure if the verity is installed or not and also if installed what is the version?
yes. it says the version is 5.0.1
Is there any difference in installation or configuration when the app and web server are in same machine and when the app and web server are installed in different servers?
============================================
D:\fs840\webserv\peoplesoft>mkvdk
mkvdk - Verity, Inc. Version 5.0.1 (_nti40, Jul 23 2004)
Usage: mkvdk [<option>...] <filespec>...
Where <option> can be a VDK switch, or any of:
-about Show the collection's about resources
-autodel Delete bulk insert file when no longer needed
-backup <dir> Specify collection backup location
-bulk Submit bulk insert file(s)
-charmap <name> Specify the character map to VDK
-collection <path> Specify the collection (required)
-create Create the collection
-credentials <user> Specify user[:passwd][:domain][:mailbox]
-datapath <path> Specify VDK datapath
-datefmt <fmt> Specify date format to VDK
-debug Enable debugging output
-delete Delete documents
-description <desc> Set the collection's description
-diskcache <num> Set VDK's disk cache size (kbytes)
-extract Extract field values from text
-help Print this usage information
-insert Insert documents (default)
-locale <locale> Specify the locale to VDK
-logfile <file> Save output in a log file
-loglevel <num> Set the VDK output level for the log
-mailboxes This option is depracated. Use the credentials option inste
ad
-maxfiles <num> Set VDK's maximum number of open files
-maxmemory <num> Set VDK's maximum memory usage (kbytes)
-mode <mode> Set the indexing mode
-modify Modify fields using field/value pairs from a bulkfile
-nohousekeep Disable housekeeping
-noindex Disable indexing
-nolock Turns off locking (dangerous)
-nooptimize Disable optimizations
-nosave Don't save collection work list
-noservice Prevents servicing of submitted work
-nosubmit Don't submit work to VDK
-numdocs <num> Number of documents to insert from bulk insert file(s)
-numpages <num> Synonym for diskcache for backward compatibility
-offset <num> Specify offset into bulk insert file(s)
-online Flag for online Bulk Modify
-optimize <spec> Optimize the collection
-outlevel <num> Set the VDK output level
-persist Service the collection forever
-purge Remove all documents from collection
-purgeback Purge in the background
-purgewait <secs> Specify delay before purge
-quiet Suppress all non-error messages
-repair Repair the collection
-servlev <spec> Advanced option for overriding service level
-sleeptime <secs> Interval between service calls for persist
-style <dir> Specify style directory for create
-submit Synonym for noservice for backward compatibility
-synch Perform work synchronously
-topicset <path> Specify VDK topic set
-update Update documents
-vdkhome <path> Specify VDK home
-verbose Output more information
-words Build word assist list
-wordindex Build word assist index
The <spec> for -optimize is a hyphenated string of:
maxmerge Perform maximal merging of partitions
squeeze Recover space from deleted documents
vdbopt Build optimized VDB's
spanword Create word list spanning all partitions
ngramindex Create ngram index into spanning word list
maxclean Really clean (not for read-write)
readonly Make the collection read-only
tuneup Fully optimize for read-write use
publish Fully optimize for read-only use
The <spec> for -servlev is a hyphenated string of:
search Enable search and retrieval
insert Enable adding and updating documents
optimize Enable opportunistic collection optimization
assist Enable building of word list
housekeep Enable housekeeping of unneeded files
delete Enable document deletion
backup Enable backup
purge Enable background purging
repair Enable collection repair
dataprep Same as search-index-optimize-assist-housekeep
index Same as insert-delete
Error: must specify collection
mkvdk done
D:\fs840\webserv\peoplesoft> -
Can anyone tell me how to check the balance on an iTunes gift card that is not yet scratched?
Can anyone tell me how to check the balance on an iTunes gift card that is not yet scratched or activated?
If it's not printed on the card, then you'll need to check the receipt from the purchase of the card. There's no way to check the value from the card itself without redeeming it.
Regards. -
How will check the space taken by a single table in a tablespace ?
How will check the space taken by a single table in a tablespace ?
dba_segments is giving the same values even if I truncate the table?
Pls replyI need to know how can we find out the size of the table in the tablespace.use user_segments (bytes) column.
How much bytes it has taken ?value from user_segments, bytes column
If u delete records will the space be used for another table in same tablespace?No, it keep the space in the same table for future usage.
How can we free that space ?truncate or drop the table and reduce the size from tablespace, if you want to reclaim the space from the tablespace, OS level.
Jaffar -
How to check the resolution of a pdf file using Acrobat 9 pro?
How to check the resolution of a pdf file using Acrobat 9 pro?
PDF files don't have one resolution, but may have none or many different resolutions, one per image. You can check the maximum/minimum resoluion with preflight in Acrobat Pro, but not in Adobe Reader.
-
How to check the current EHP stack level? in SAP
Dear All,
How to check the current EHP stack level? in SAP . i have checked forum before i am posting but still comfused .
same one said SAP_APPL , EA_Appl and SAP _HR is 60n if n=1.2.3.4. if n =1 is enhanced package 1 similarly 2,3,4 .
some one said SAP_BASIS 701,702,703,704 . according ehp1,2,3,4.
Pls check the details and confirm either is ehp1 or ehp4 .
Component version is simply shows SAP ECC 6.0 in system -> status.
Software Component - Release - SP level
SAP_ABA 701 0007
SAP_BASIS 701 0007
PI_BASIS 701 0007
ST-PI 2008_1_700 0003
SAP_BS_FND 701 0008
SAP_BW 701 0007
SAP_AP 700 0021
WEBCUIF 700 0008
SAP_APPL 604 0008
SAP_HR 604 0029
SAP_HRCAR 604 0029
SAP_HRCAT 604 0029
SAP_HRCAU 604 0029
SAP_HRCBE 604 0029
SAP_HRCBR 604 0029
SAP_HRCCA 604 0029
SAP_HRCCH 604 0029
SAP_HRCCL 604 0029
SAP_HRCCN 604 0029
SAP_HRCDE 604 0029
SAP_HRCDK 604 0029
SAP_HRCES 604 0029
SAP_HRCFI 604 0029
SAP_HRCFR 604 0029
SAP_HRCGB 604 0031
SAP_HRCHK 604 0029
SAP_HRCID 604 0029
SAP_HRCIE 604 0029
SAP_HRCIN 604 0029
SAP_HRCIT 604 0029
SAP_HRCJP 604 0029
SAP_HRCKR 604 0029
SAP_HRCMX 604 0029
SAP_HRCMY 604 0029
SAP_HRCNL 604 0029
SAP_HRCNO 604 0029
SAP_HRCNZ 604 0029
SAP_HRCPH 604 0029
SAP_HRCPT 604 0029
SAP_HRCRU 604 0029
SAP_HRCSE 604 0029
SAP_HRCSG 604 0029
SAP_HRCTH 604 0029
SAP_HRCTW 604 0029
SAP_HRCUN 604 0029
SAP_HRCUS 604 0029
SAP_HRCVE 604 0029
SAP_HRCZA 604 0029
SAP_HRGXX 604 0029
SAP_HRRXX 604 0029
EA-IPPE 400 0018
EA-APPL 604 0008
EA-DFPS 600 0018
EA-FINSERV 604 0007
EA-GLTRADE 604 0008
EA-HR 604 0029
EA-HRCAR 604 0029
EA-HRCAT 604 0029
EA-HRCAU 604 0029
EA-HRCBE 604 0029
EA-HRCBR 604 0029
EA-HRCCA 604 0029
EA-HRCCH 604 0029
EA-HRCCN 604 0029
EA-HRCDE 604 0029
EA-HRCDK 604 0029
EA-HRCES 604 0029
EA-HRCFI 604 0029
EA-HRCFR 604 0029
EA-HRCGB 604 0029
EA-HRCHK 604 0029
EA-HRCID 604 0029
EA-HRCIE 604 0029
EA-HRCIN 604 0029
EA-HRCIT 604 0029
EA-HRCJP 604 0029
EA-HRCKR 604 0029
EA-HRCMX 604 0029
EA-HRCMY 604 0029
EA-HRCNL 604 0029
EA-HRCNO 604 0029
EA-HRCNZ 604 0029
EA-HRCPH 604 0029
EA-HRCPT 604 0029
EA-HRCRU 604 0029
EA-HRCSE 604 0029
EA-HRCSG 604 0029
EA-HRCTH 604 0029
EA-HRCTW 604 0029
EA-HRCUN 604 0029
EA-HRCUS 604 0029
EA-HRCVE 604 0029
EA-HRCZA 604 0029
EA-HRGXX 604 0029
EA-HRRXX 604 0029
EA-PS 604 0007
EA-RETAIL 604 0007
FINBASIS 604 0008
ECC-DIMP 600 0018
ERECRUIT 604 0008
FI-CA 604 0008
FI-CAX 604 0007
INSURANCE 600 0018
IS-CWM 600 0018
IS-H 600 0024
IS-M 600 0018
IS-OIL 600 0018
IS-PS-CA 604 0007
IS-UT 600 0018
LSOFE 600 0018
SEM-BW 604 0008
ST-A/PI 01M_ECC600 0001
Regards
Edited by: satheesh0812 on Nov 17, 2011 7:57 AMHi Sateesh,
SAP_ABA 701 0007
SAP_BASIS 701 0007
PI_BASIS 701 0007
ST-PI 2008_1_700 0003
SAP_BS_FND 701 0008
SAP_BW 701 0007
SAP_AP 700 0021
WEBCUIF 700 0008
SAP_APPL 604 0008
Based on the component information provided by you, I can conclude that your system is ECC 6.0 EHP4.
EHP4 is derived from your component SAP_APPL 604.
In addition to this your EHP4 system has NW stack on NW 7.0 EHP1.
Hence your system is ECC 6.0 EHP4 with NW 7.0 EHP1.
Hope this answers your query.
Regards,
Deepak Kori -
How to check the format (PAL or NTSC) of a DVD?
I wonder if someone can tell me how to check the format (PAL or NTSC) of DVD’s that I receive from my friends around the world. Many of them have no marking as to the format... Is there some software that can do this?
Hello Peace Freak,
have a look at myDVDedit (http://www.mydvdedit.com). It's actually designed to do postproduction on a DVD, but will also display a lot of info, such as TV standard, 16:9 vs. 4:3, etc.
Insert your DVD, then launch myDVDedit and open the VIDEO_TS folder contained in your DVD. Click the IFO tab to find the information you're looking for.
hope this helps
mish
Maybe you are looking for
-
Need help in merging two database
Dear All, Can any one please let me know the methodology/Best practices for merging two databases. We are having two oracle Database A and B, the data from Database A has to be migrated to Database B using PL/SQL scripting. it will be a great help,Th
-
(nQSError:10018) Access for the requested connection is refused
Hi Techies, Good Afternoon!!! Recently I faced a problem when I tried to view the data of my table in PHYSICAL LAYER (nQSError:10018) Access for the requested connection is refused (nQSError: 43037) Invalid Catalog, SupplierSales, specified. I did ch
-
Inscrease the decimal Places in Tcode QA32(UD)
Hi Guys, I want to increases decimal point in Tcode QA32 . My user requirement is to increases the decimal places from 3 to 4 in Inspection lot stock / to be posted. We maintain 3 decimal places & I want 5 decimal places at the time of Usage Decision
-
Passing parameter to the external process like notepad, calc etrc.
Dear Experts, Can anyone help me, to find out how can we pass the value parameter, during calling external process like Notepad, Calculator etc. I want to fetch other data related to the parameter from the other ERP. Eg. If I pass 'Hi ' as a paramete
-
Requirement on perticular day of the week.
Dear All, I have a query, I have raw material with "VB" consumption base planning. But i dont want the PR of every day, only on Monday i start the purchase acivity, so PR should be only on MOnday and not any other day. I need to run MRP every day, wh