How to check trunk port on 3548 xl switch

Hi all,
i have 3548 xl switch i know on other switches i can use command
sh int trunk but on this switch it does not work.
do anyone knows which command we can use to check trunk ports other then this
sh int fa switchport???????????
thanks
mahesh

Similar Messages

SG-300 CLI How to display trunk ports

Hello
I have a very simple question about CLI on SG-300. How to display trunk ports via cli? I have switch with 28 ports and I wanted to see what switchport mode is applied to every port - or simply we can just focus on trunk ports. On Cisco Catalysts there is "show trunk" command in order to get list of ports in Trunk mode. Is there any way to do it on SG-300?
srv-sw-1#show version
SW version    1.3.0.62 ( date 02-May-2013 time 14:55:01 )
Boot version    1.1.0.6 ( date 11-May-2011 time 18:31:00 )
HW version    V02
thank you
michal

Hi,
I remember something at least that works port by port:
>#sh int switchport fa 1
Port : fa1
Port Mode: Trunk
Gvrp Status: disabled
Ingress Filtering: true
Acceptable Frame Type: admitAll
Ingress UnTagged VLAN ( NATIVE ): 1
Port is member in:
Vlan               Name               Egress rule Port Membership Type
1                  1                  Untagged          System
Displays detailed info about each port, range command will not work, but it's something.
You can check for vlans and or tags with:
sh vlan
sh vlan tag 1.
NTex

How to check the port number of a particular ip?

One usaer askingme this question see below please
I need to know what port is being used from for IP 130.52.8.3.How to check please suggest me gurus

You need to ask the user that which port he is looking for and for what program.Netstat can be used to see the ports used at the moment in your pc.See here for example on a Winxp box running 11gr1(11106)
c:\>netstat
Active Connections
Proto Local Address          Foreign Address        State
TCP    Oracle:1025            localhost:1742         TIME_WAIT
TCP    Oracle:1025            localhost:1744         TIME_WAIT
TCP    Oracle:1025            localhost:1746         TIME_WAIT
TCP    Oracle:1025            localhost:1748         ESTABLISHED
TCP    Oracle:1025            localhost:1750         TIME_WAIT
TCP    Oracle:1025            localhost:1752         TIME_WAIT
TCP    Oracle:1025            localhost:1754         TIME_WAIT
TCP    Oracle:1025            localhost:1755         TIME_WAIT
TCP    Oracle:1025            localhost:1757         TIME_WAIT
TCP    Oracle:1025            localhost:1760         TIME_WAIT
TCP    Oracle:1025            localhost:1762         TIME_WAIT
TCP    Oracle:1025            localhost:1763         TIME_WAIT
TCP    Oracle:1025            localhost:1765         TIME_WAIT
Aman....

Configure trunk port between 2 SG500 switches

Hi all,
I'm trying to do what seems to be a simple task but cannot get it to work. I've very familiar with the Cisco commands on 2900 all the way up to 6500 series switches. The SG500 has me stumped. I have 3 switches, sw1, sw2, sw3. sw1 and sw2 are stacked. sw3 is standalone and in a different part of the building, maybe 25ft away. All I want to do is set up a trunk port between the stack and the standalone. In going by past experience, I would set the port as :
- switchport mode trunk
- switchport trunk allowed vlan 2,3,4
The SG makes me specify tagged or untagged - which is fine. So any vlan I want to move across the trunk i tag, obviously. I do everything as I've done for years and it doesn't work. VLAN1 is untagged, all VLANs I want to flow are allowed and tagged.
I'm quickly realizing I should have bucked up and just bought what I'm used to but I didn't have a choice in the matter.
Any help would be great!
Shawn

Hi Shawn, something is the matter if the switch is asking you for tagged or untagged. The only reason it should be requesting a tag or untag statement is from a general port mode.
The command syntax for the function is exactly the same as an IOS switch
switchport mode trunk
switchport trunk allowed vlan add 2,3,4
Just like a Catalyst, if you use switchport trunk allowed vlan x,x,x it won't take the command as insufficient privilege or whatever the error it gives, suffice it say it doesn't really do anything without the add(or remove).
-Tom
Please mark answered for helpful posts

Windows NDIS filter - how to check if port is used by operating system

Hi,
I am writing a windows NDIS filter driver (for versions 6.0,6.2.6.3) and would like to be able to query from inside the kernel about the status of a tcp port (is it in use?).
The function: FilterReceiveNetBufferLists is called when I receive a packet. Afterwards the tcp header of the packet is extracted. I want to check if the destination port which I've extracted from the header is being used on the local machine.
Can I use WSK Network API, WFP or some other API to check if a port is being used by the operating system? and if so how do I do it?
Thanks in advance!

This won't be easy, but you can get the address table by sending IOCTL_TCP_QUERY_INFORMATION_EX to \Device\TCP as documented
here. You'll need to spend some time looking at TCPIOCTL.H in the SDK, too. If you search the Internet for IOCTL_TCP_QUERY_INFORMATION_EX, you'll find some hints on how to use it.
-Brian
Azius Developer Training www.azius.com Windows device driver, internals, security, & forensics training and consulting. Blog at www.azius.com/blog

How to check the port status in IPSec VPN

Hi Experts,
Is there any way by which we can find that the UDP port 500 is blocked at ISP side.
My IPSec VPN configured between two cisco router in production network is not coming up and experts are saying that the ISP has blocked the port 500 somewhere in between, however ISP denying and saying that they dont block any port.
kindly suggest what whould be the best wayout?
Thanks

Thanks Marvin,
How could I capture the traffic from initiating peer so that I can figure out that UDP port 500 is blocked or not, with the help of wireshark...
In my network ONT/Modem (having four ethernet port) is installed at both the end and from one of its port the router is connected at each side and IPSec VPN is configured between the router. to check the UDP port status, my question is, should i connect my laptop (running with wireshark) with one of the port of ONT and capture the traffice or is there any other way and how that traffice will tell me that port 500 is blocked or not?

How to check silent switches for adobe reader installation ?

Hi All,
We are working on one project where we have to install adobe remotely and silently on around 5K machines. I am wondering how to check all adobe reader silent installation switches.
Any help would be great
Thanks And Regards
Vaibhav Singh
[personal info removed by moderator]

What do you mean by "check" the silent switches? Do you mean you want the documentation for enterprise deployment?
(Worth mentioning just in case: you will need a deployment license from Adobe).

TRUNK PORTS (HELP URGENT)

Dear all
Last night I configured the trunk ports between all my switches, Its a redundant circuit. I did the last one that plugs back into the core switch and it took all of my building out, I could not get to any other switch, For some reason spanning tree blocked the trunk ports that I set up on the last switch !!!!
When setting up trunks between switches I presume you have to set 2 trunks per switch ? i.e 1 trunk to previous switch and another to the next switch !!!!
I have never been so scared !!!!

here are the configs,
here is the backbone
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
hostname TK-BACKBONE-3550
enable secret xxxx
enable password xxx
ip subnet-zero
spanning-tree mode pvst
spanning-tree extend system-id
interface GigabitEthernet0/1
switchport mode dynamic desirable
interface GigabitEthernet0/2
switchport mode dynamic desirable
interface GigabitEthernet0/3
switchport mode dynamic desirable
interface GigabitEthernet0/4
switchport mode dynamic desirable
interface GigabitEthernet0/5
switchport mode dynamic desirable
interface GigabitEthernet0/6
switchport mode dynamic desirable
interface GigabitEthernet0/7
switchport trunk encapsulation dot1q
switchport mode dynamic desirable
interface GigabitEthernet0/8
switchport mode dynamic desirable
interface GigabitEthernet0/9
switchport mode dynamic desirable
interface GigabitEthernet0/10
switchport mode dynamic desirable
interface GigabitEthernet0/11
switchport mode dynamic desirable
interface GigabitEthernet0/12
switchport mode dynamic desirable
interface Vlan1
ip address 10.1.2.30 255.0.0.0
interface Vlan200
no ip address
ip default-gateway 10.1.1.1
ip classless
ip http server
snmp-server community public RO
line con 0
line vty 0 4
password xxx
login
line vty 5 15
password xxx
login
end
here is the last switch in the circuit
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
hostname BCR-2950-2
enable secret xxxx
enable password xxx
ip subnet-zero
no ip finger
interface FastEthernet0/1
interface FastEthernet0/2
interface FastEthernet0/3
interface FastEthernet0/4
interface FastEthernet0/5
interface FastEthernet0/6
interface FastEthernet0/7
interface FastEthernet0/8
interface FastEthernet0/9
interface FastEthernet0/10
interface FastEthernet0/11
interface FastEthernet0/12
interface FastEthernet0/13
interface FastEthernet0/14
interface FastEthernet0/15
interface FastEthernet0/16
interface FastEthernet0/17
interface FastEthernet0/18
interface FastEthernet0/19
spanning-tree portfast
interface FastEthernet0/20
interface FastEthernet0/21
interface FastEthernet0/22
interface FastEthernet0/23
interface FastEthernet0/24
interface GigabitEthernet0/1
interface GigabitEthernet0/2
interface Vlan1
ip address 10.1.2.24 255.0.0.0
no ip route-cache
ip default-gateway 10.1.1.1
no ip http server
snmp-server engineID local xxxx
snmp-server community private RW
snmp-server community public RO
line con 0
exec-timeout 0 0
transport input none
line vty 0 4
password parker2710
login
line vty 5 15
password parker2710
login
end
hope this helps
Carl

How to check apache pl/sql listener port

hai
can any tell me how to check apache pl/sql listener port
Thanks
BhanuChander

You may get it by searching the portlist.ini file in the ORACLE_HOME of the product you use.....
So , for instance the following , are the ports those of Dev_Suite_Home:
Oracle Developer Suite HTTP port = 8889
Oracle Developer Suite JMS port = 9240
Oracle Developer Suite RMI port = 23910
Oracle HTTP Server Diagnostic port = 7200
Reports Services bridge port = 14011
Reports Services discoveryService port = 14021But ... note that these ports are valid only at the time of installation....!!!!
Greetings...
Sim

How to check status of a particular port by using netstat command?

How to check status of a particular port by using netstat command?
I want to check port 443 in my server is open or not, is there any other way to check port via commandline?

Hi,
You can run the below command in an administrator command prompt on the server:
netstat -ano|findstr ":443"
-TP

How to check the VXML Port utilisation in CVP

Hi,
Currently we are using 300 VXML Ports but while monitoring the Active Call in Operational Console
it is showing 300 + Active calls in the VXML Server.
Please kindly help me to findout why Active calls status is showing mor than 300 +.
Regards,
A.Pravin Raj

You can check VXML port Utilization by running status.bat file , it will show you the exact ports usage & it will also displays on which application how many callers are.
c:/Cisco/CVP/VXMLServer/admin

How to configure a port channel with VLAN trunking (and make it work..)

We're trying to configure a port channel group with trunked ports to connect a NetApp HA pair. We want to create two data LIFs and connect them to the switch stack. We are trying to create 2 data lifs, one for cifs and one for nfs that are on different vlans.
We want the same ports to be able to allow multiple vlans to communicate. (trunked)
These data lifs should be able to fail over to different nodes in the HA pair and still be able to communicate on the network.
What this means is that we have to connect 4 ports each for each node in the NetApp HA Pair to the switches and create a port channel of some type that allows for trunked vlans. When we configure the ports, the configuration is as follows (below):
We are only able to configure an IP on one of the vlans.
When we configure an IP from another vlan for the data lif, it does not respond to a ping.
Does anyone have any idea what I'm doing wrong on the Cisco switch?
interface GigabitEthernet4/0/12
description Netapp2-e0a
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10,20,511,519
channel-protocol lacp
channel-group 20 mode active
end
interface GigabitEthernet4/0/13
description Netapp2-e0c
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10,20,511,519
channel-protocol lacp
channel-group 20 mode active
end
interface GigabitEthernet6/0/12
description Netapp2-e0b
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10,20,511,519
channel-protocol lacp
channel-group 20 mode active
end
interface GigabitEthernet6/0/13
description Netapp2-e0d
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10,20,511,519
channel-protocol lacp
channel-group 20 mode active
end
interface Port-channel20
description Netapp2-NFS
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10,20,511,519
spanning-tree portfast
spanning-tree bpduguard enable
end

Our problem was fixed by the storage people. They changed the server end to trunk, and the encapsulation / etherchannel.
I like all the suggestions, and they probably helped out with the configuration getting this to work.
Thanks!
interface Port-channel20
description Netapp2-NFS
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10,20,511,519
switchport mode trunk
interface GigabitEthernet4/0/12
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10,20,511,519
switchport mode trunk
channel-protocol lacp
channel-group 20 mode active
interface GigabitEthernet4/0/13
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10,20,511,519
switchport mode trunk
channel-protocol lacp
channel-group 20 mode active
interface GigabitEthernet6/0/12
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10,20,511,519
switchport mode trunk
channel-protocol lacp
channel-group 20 mode active
interface GigabitEthernet6/0/13
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 10,20,511,519
switchport mode trunk
channel-protocol lacp
channel-group 20 mode active

How to find which port on the switch that it connected with Mac address?

Hi,
I am trying to find which port of the switches it connected to thru mac-address?
I am able to get the mac-address from the ip address when i do
"show ip dhcp binding snooping" at the core switch.
But when I move on to the Edge switch to check which PC with this Mac address connected to the port,i returned with no result.(onli trunk port result)
I use sh ip arp | inc 000d.60cb.445d
but didn't give me which port it connected to.
How to solve this problem?
thanks!
KL

Hi KL,
If you are already on the edge switch you can run a command "sh mac-address-table address " and it will give you the port number.
Incase you get a port which is a trunk port that means the end device does not exist on this switch and exist on some downstream switch. So you can just find out the ip address of the downstream switch with "sh cdp neigh detail" command and connect to that downstream switch and then again issue the command "sh mac-address-table address " and check the port number and follow the above steps till the time you get the switch on whcih end host is connected.
HTH, if yes please rate the post.
Ankur

How do I do port forwarding on my airport extreme for my IP camera (foscam)?

Hi,
I've been working on this for what seems like a week. I purchased a wireless security camera to put in my house and to see from my laptop (or IPAD2) when I'm away. I am able to see it from either device when I'm here at home, but not when I'm out on the road.
According to the instructions for a mac setup, I needed to set up a DDNS service and get a free account at DynDNS, which I did. They also told me to use a different port than 80, suggesting 8081 as the http port which I plugged in to the camera device setting.. The next step is to do PORT FORWARDING and then I should be able to use my DDNS domain name and port number to login to my camera anywhere...
I'm stuck in how to do this with my airport extreme. I see where I have to go into utilities and click on airport utility, and then manual set-up..
Right now when I click on the Internet tab at the top I see the connection sharing is off (Bridge Mode), and that I have to change it to share a public IP address to get DHCP and NAT to appear in the tabs..
when I go to NAT, the box for enable NAT port mapping protocol is checked and then there is a tab I can click on that says Configure Port Mapping.
I know that I'm supposed to click the plus button + to enter a service and a port and here's where I get stuck
when I click the + button I can either click on the choose a service tab, which then drops down a list of services like Personal File Sharing, Window Sharing, Personal Web Sharing, Remote Login SSH , etc, or just keep it where it says choose a service and not choose one of the services.
Then there are some boxes to fill in for Public UDP Port(s), Public TCP Port(s), PRIVATE IP address-where the only numbers I can change are the last ones and I don't know if I'm supposed to put the IP address of the camera or what? and then the boxes for Public UDP and PUBLIC TCP.
I tried a few times to fill out the port numbers to 8081 (the one I selected for the IP camera) but I don't know what to do for the private IP address. When I changed the last numbers to the IP address of my camera, and went to update, it told me that I had to correct the 2 problems before updating:
DHCP beginning address, and dhcp ending address...as the DHCP range you have entered conflicts with the WAN IP address of your Airport wireless device. So I cancel and am stuck.
Sorry this is so long.. but I really can't get anyone to help me figure this out.. The camera company isn't answering ..
Thanks!!
Barry

Thanks for the info. I checked the model number on the Westell site to get info on the device. From Westell's info.....
1. Product Description
This ADSL modem is a NAT router with a four port 10/100BaseT Ethernet switch, a USB port and 802.11g wireless interface.
So, while you might refer to it as a "modem" ( a modem will only have one Ethernet port), you have a router or gateway. A gateway is simply a modem and router in the same box.
With the AirPort Extreme, you have 2 routers on the network. Basic networking rules dictate that when there are 2 routers, the first....your Westell.....must handlde DHCP and NAT, and the second router....in this case the AirPort Extreme....must be configured to operate in Bridge Mode so that it will function correctly on the network. That's why the AirPort Extreme is in Bridge Mode. That is the correct setting on your network.
That's also why you were getting the error messages when you tried to configure the Extreme as a second router.
As I mentioned before, any port mapping or port forwarding is going to have to be set up on the "main" router....your Westell. It cannot be set up on the AirPort Extreme.

How can I encrypt my data links between switch uplink ports ? I'm unable to use "cts Manual" command in C3560X switch.suggest me

How can I encrypt my data uplinks between switch trunk ports ? I'm unable to use "cts Manual" command in C3560X switch.suggest me as I want to encrypt my switch-to-switch link with Cisco TrustSec.

Hi
Login to switch & go to interface..
There you can give tags.. (ISL & DONT1Q)
Command switch-port mode trunk
Switch-port trunk encapsulation ssl or dot1Q

How to check trunk port on 3548 xl switch

Similar Messages

Maybe you are looking for