How to check wheather the project is having 'AUC' or not.

Hi friends,
How to check wheather the project is having 'AUC' or not.
Regards,
Safiq.

Hi Basha ,
as per my knowledge , WBS will have AUC ,Settlement rules etc, so u need to check asset tables based on the WBS element .
regards
Prabhu

Similar Messages

How to check whether the Application Server directory exits or not

Hi,
I have a selection screen in which I give the Application server file name(UNIX file) as input. Here, I would like to check whether the Server directory exists or not.
Let us say, the path I gave in the selection screen is /usr/sap/tmp/testfile.txt . Here, the file name is testfile.txt and the server directory is /usr/sap/tmp . I would like to check whether this directory /usr/sap/tmp exists in the server or not. I am not bothered about the file name as I am going to write data into the file. I am mainly concerned about whether the directory exists in the server or not. and one more thing... this is the Application Server path not the Local path.
Can anyone help me on the same how to check whether the server directory exists or not.
Thanks in advance.
Best Regards,
Pradeep.

Also you can use the FM EPS_GET_DIRECTORY_LISTING for this purpose.
Store the directory name
    l_dpath = p_file+0(l_no).
Validate the directory of the application server
    CALL FUNCTION 'EPS_GET_DIRECTORY_LISTING'
      EXPORTING
        dir_name               = l_dpath
      TABLES
        dir_list               = l_i_dlist
      EXCEPTIONS
        invalid_eps_subdir     = 1
        sapgparam_failed       = 2
        build_directory_failed = 3
        no_authorization       = 4
        read_directory_failed = 5
        too_many_read_errors   = 6
        empty_directory_list   = 7
        OTHERS                 = 8.
If any problem occurs with the directory then display proper
error message
    IF sy-subrc <> 0.
    Display error message
      MESSAGE e018 WITH 'Problem with directory entered'(008).
    ENDIF. " sy-subrc <> 0
Regards,
Joy.

How to check whether the user has a certificate or not?

Hi everyone.
We're currently finishing a web project and the last step is to check whether users accessing the application have a valid certificate or not.
Users with a valid certificate can access all the data. Users without any certificate installed on their browsers may still proceed, but they won't be able to see all data. Please note that the lack of a certificate doesn't mean an error - it's just another use case.
Is there any way to check whether users have a certificate installed on their browsers?
Thanks in advance.
Edit: sorry, I forgot to post some tech details. We're using Struts 1.2 on a Tomcat 5 app server.
Message was edited by:
advaca

I am not sure how Tomcat handles this, but you need to use two-way (mutual authentication) request but not enforce SSL between Tomcat and the client browser. This will make the browser prompt the user for the cert they want to send. Then you'll need to tackle the other part of your problem, getting the correct content displayed depending on whether the user sent a cert or not. I'm even less help there than I was on the first part of your question.
So, yeah - good luck with that
Lee

How to check whether the report is being called or not

Iam using srw.run_report.for calling another report. I have registered both the report in oracle apps11.0.3. When i run the master report in oracle apps I want to see whether the second report is called or not. How to check this.
Thanks.

try to check it in C:\Reports6i\Bin
C:\Reports6i\Bin <-- this may varry depending on the location of your reports.
btw, are you generating a pdf file?

How to check if the Companian CD is istalled or not ??

Hi All,
I Have a 10g Oracle Database running on a Solaris 10g machine.I m not sure if the Companian CD is installed or not.My question is How can I check if it is installed or not.If not installed can I installed even after I have created my databases.
Best Regards.

In 10g, the base software for db comes in the first cd itself. So if have that, you can go ahead to create database and so on. Companion cd is just for the installation of hte additional products like APEX and so on.
For the completion of it, you may want to review the installation log.. That should help,
http://download.oracle.com/docs/cd/B19306_01/install.102/b15708/app_ts.htm#sthref561
HTH
Aman....

How to check whether the new records are inserted or not in SSIS

Hi All,
I have a SSIS package which insert data from Table A to Table B . I need to insert only new records to Table B. If any record is not there it should insert the record if not ignore that record.
I used Lookup Transformation but it doesn't works from me, which tab should i need to select? Like in General tab we have ignore failure, Fail Component,Redirect rows to no match output, Redirect rows to error output?
Please help me on this issue.
Thanks, Shyam Reddy.

On what basis you're doing the lookup? Are you using correct column for the lookup? It should be based on common columns based on which tables are related (mostly primary key column)
Can you also show the column tab to see how you've done the mapping ?
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to check whether the Workflow event is triggered or not ?

Hello All,
My scenario is like this :
1. Go to MM02
2. Change a material of any view other than the classification.
3. Save it.
4. Go to transaction SWEL and check there .
5. An entry has been created in that across the object type Y01BUS1001.
6. Now I can check in the Transaction CFG1 the Log details.
7. This is correct.
8. Now the same procedure is not working when I change the material for the classification View.
9. Do i need to check something else ?
10. When the classification data is changed for a material the Object type Y01BUS1003 has to be triggered.
Can any one help me out ?
Regards,
Deepu.K

Hi,
If you are using the Event collector, you can check in from RSA1-> Tools-> Event collector. You cannot trace whether that event was raised from anywhere I think
Regards

How to check if the accounting Document is cleared or not. Need a FM

Hi Gurus,
I have a requirement which I need to know if an accounting document is cleared or not.
My requirement is: from an invoice (VBRK-VBELN), I need to know the correspondent accounting document number which I can get from table BKPF (accounting doc number - BELNR). After that I can go to table BSEG to check the status, then I will know if the document is cleared or not... But this will take a lot of time, and the performance will not be good. I need to implement this functionality in a program.. And I would like to know if I can get all this information using some Function Module.
Thanks

Hi again,
IF you have the invoice document + BUKRS + GJAHR, try this:
Search in the BKPF with the following:
BKPF-BUKRS = VBRK-BUKRS
GJAHR = Fiscal Year (get from the dates)
BKPF-AWKEY = (INVOICEDOC Concatenated with GJAHR. Example 54002230392009)
I tried that on my system and it was pretty fast.
PD. I have checked with a trace and SAP works the same way, it uses the fields described before + AWTYP (If you know it, In my case I used RMRP) to obtain the Accounting Doc.
Regards,
Gilberto Li
Edited by: Gilberto Li on Mar 10, 2009 5:37 PM

How to check weather a queue is having any corruption.

Hi,
Can any bodu let me know how to check weather a queue is having corruption or not.
Thanks,
Aditya.

these are the contentents of the xml file
<?xml     version="1.0"?>
<!DOCTYPE exceptioninfo [
     <!ELEMENT exceptioninfo (exception+) >
     <!ELEMENT exception (expname,messagecode,loggingtype,handlerclass) >
     <!ELEMENT expname (#PCDATA)>
     <!ELEMENT messagecode (#PCDATA)>
     <!ELEMENT loggingtype (#PCDATA)>
     <!ELEMENT handlerclass (#PCDATA)>
     ]>
<exceptioninfo>
     <exception >
          <expname>NoAreasFoundException</expname>
          <messagecode>expError.noAreasFound</messagecode>
          <loggingtype>nologging</loggingtype>
          <handlerclass>Handler1</handlerclass>
     </exception>
     <exception>
          <expname>ServiceActiveAtStoresException</expname>
          <messagecode>expError.serviceActiveAtStores</messagecode>
     <loggingtype>nologging</loggingtype>
          <handlerclass>Handler2</handlerclass>
     </exception>
     <exception>
          <expname>UniqueConstraintException</expname>
          <messagecode>expError.uniqueconstraint</messagecode>
          <loggingtype>nologging</loggingtype>
          <handlerclass>Handler3</handlerclass>
     </exception>
</exceptioninfo>
In this file exception is a node which is having some child nodes like <messagecode>...... now within my java program i am going to parse the given xml file there i am going to check what are the nodes which are having child nodes using hasChildNodes() method which is there in org.w3c.dom.Node this method will returns true if there are any childNodes for the node if not this will return false but when i am trying to use in my program for every node this method is returning false
can u help me now
Thanks
Rajesh

How to check if the user has only the display authority of a message

hi,
How to check if the user has only the display authority of a message but does not have the change authority for a certain message?
Best regards,

hi blake
though i am an application consultant and for authorisation u need to have help of BASIS person if u r not the one but still i can guide u regarding the same,
Basically Authorization Management
Use
You can use the following authorization objects to control the authorizations for maintaining business partner data:
        Authorization objects for the Business Partner:
             B_BUPA_GRP
             B_BUPA_ATT
             B_BUPA_FDG
             B_BUPA_RLT
Authorization objects for relationships:
             B_BUPR_BZT
             B_BUPR_FDG
In addition, you can assign an authorization group to a business partner in the dialog. The authorization group controls which users may maintain data for this business partner.
You can also define authorizations for fields and field groups using the Business Data Toolset (BDT). Depending on the settings you have made, the system carries out the relevant authorization checks.
In the dialog in the SAP GUI, you can display an overview of the authorizations assigned to you by pressing the button Settings.
For more information on authorization management, see the Implementation Guide (IMG) of the Business Partner, as well as in the Developers Handbook for the BDT under Authorizations.
IntegrationAuthorization management for the Business Partner forms part of the SAP authorization concept.
Prerequisites
You have made the necessary settings in Customizing of the Business Partner under Basic Settings--> -Address Management.
Moving over
AS ABAP Authorization Concept
The ABAP authorization concept protects transactions, programs, and services in SAP systems from unauthorized access. On the basis of the authorization concept, the administrator assigns authorizations to the users that determine which actions a user can execute in the SAP system, after he or she has logged on to the system and authenticated himself or herself.
To access business objects or execute SAP transactions, a user requires corresponding authorizations, as business objects or transactions are protected by authorization objects. The authorizations represent instances of generic authorization objects and are defined depending on the activity and responsibilities of the employee. The authorizations are combined in an authorization profile that is associated with a role. The user administrators then assign the corresponding roles using the user master record, so that the user can use the appropriate transactions for his or her tasks.
Authorization Checks
To ensure that a user has the appropriate authorizations when he or she performs an action, users are subject to authorization checks.
The following actions are subject to authorization checks that are performed before the start of a program or table maintenance and which the SAP applications cannot avoid:
        Starting SAP transactions (authorization object S_TCODE)
        Starting reports (authorization object S_PROGRAM)
        Calling RFC function modules (authorization object S_RFC)
        Table maintenance with generic tools (S_TABU_DIS)
Checking at Program Level with AUTHORITY-CHECK
Applications use the ABAP statement AUTHORITY-CHECK, which is inserted in the source code of the program, to check whether users have the appropriate authorization and whether these authorizations are suitably defined; that is, whether the user administrator has assigned the values required for the fields by the programmer. In this way, you can also protect transactions that are called indirectly by other programs.
AUTHORITY-CHECK searches profiles specified in the user master record to see whether the user has authorization for the authorization object specified in the AUTHORITY-CHECK. If one of the authorizations found matches the required values, the check is successful.
Starting SAP Transactions
When a user starts a transaction, the system performs the following checks:
        The system checks in table TSTC whether the transaction code is valid and whether the system administrator has locked the transaction.
        The system then checks whether the user has authorization to start the transaction.
The SAP system performs the authorization checks every time a user starts a transaction from the menu or by entering a command. Indirectly called transactions are not included in this authorization check. For more complex transactions, which call other transactions, there are additional authorization checks.
             The authorization object S_TCODE (transaction start) contains the field TCD (transaction code). The user must have an authorization with a value for the selected transaction code.
             If an additional authorization is entered using transaction SE93 for the transaction to be started, the user also requires the suitable defined authorization object (TSTA, table TSTCA).
If you create a transaction in transaction SE93, you can assign an additional authorization to this transaction. This is useful, if you want to be able to protect a transaction with a separate authorization. If this is not the case, you should consider using other methods to protect the transaction (such as AUTHORITY-CHECK at program level).
        The system checks whether the transaction code is assigned an authorization object. If so, a check is made that the user has authorization for this authorization object.
The check is not performed in the following cases:
You have deactivated the check of the authorization objects for the transaction (with transaction SU24) using check indicators, that is, you have removed an authorization object entered using transaction SE93. You cannot deactivate the check for objects from the SAP NetWeaver and HR areas.
This can be useful, as a large number of authorization objects are often checked when transactions are executed, since the transaction calls other work areas in the background. In order for these checks to be executed successfully, the user in question must have the appropriate authorizations. This results in some users having more authorization than they strictly need. It also leads to an increased maintenance workload. You can therefore deactivate authorization checks of this type in a targeted manner using transaction SU24.
             You have globally deactivated authorization objects for all transactions with transaction SU24 or transaction SU25.
             So that the entries that you have made with transactions SU24 and SU25 become effective, you must set the profile parameter AUTH/NO_CHECK_IN_SOME_CASES to Y (using transaction RZ10).
All of the above checks must be successful so that the user can start the transaction. Otherwise, the transaction is not called and the system displays an appropriate message.
Starting Report Classes
You can perform additional authorization checks by assigning reports to authorization classes (using report RSCSAUTH). You can, for example, assign all PA* reports to an authorization class for PA (such as PAxxx). If a user wants to start a PA report, he or she requires the appropriate authorization to execute reports in this class.
We do not deliver any predefined report classes. You must decide yourself which reports you want to protect in this way. You can also enter the authorization classes for reports with the maintenance functions for report trees. This method provides a hierarchical approach for assigning authorizations for reports. You can, for example, assign an authorization class to a report node, meaning that all reports at this node automatically belong to this class. This means that you have a more transparent overview of the authorization classes to which the various reports are transported.
You must consider the following:
              After you have assigned reports to authorization classes or have changed assignments, you may have to adjust objects in your authorization concept (such as roles (activity groups), profiles, or user master records).
              There are certain system reports that you cannot assign to any authorization class. These include:
              RSRZLLG0
              STARTMEN (as of SAP R/3 4.0)
              Reports that are called using SUBMIT in a customer exit at logon (such as SUSR0001, ZXUSRU01).
              Authorization assignments for reports are overwritten during an upgrade. After an upgrade, you must therefore restore your customer-specific report authorizations.
Calling RFC Function Modules
When RFC function modules are called by an RFC client program or another system, an authorization check is performed for the authorization object S_RFC in the called system. This check uses the name of the function group to which the function module belongs. You can deactivate this check with parameter auth/rfc_authority_check.
Checking Assignment of Authorization Groups to Tables
You can also assign authorization groups to tables to avoid users accessing tables using general access tools (such as transaction SE16). A user requires not only authorization to execute the tool, but must also have authorization to be permitted to access tables with the relevant group assignments. For this case, we deliver tables with predefined assignments to authorization groups. The assignments are defined in table TDDAT; the checked authorization object is S_TABU_DIS.
You can assign a table to authorization group Z000. (Use transaction SM30 for table TDDAT) A user that wants to access this table must have authorization object S_TABU_DIS in his or her profile with the value Z000 in the field DICBERCLS (authorization group for ABAP Dictionary objects).
please See also:
        SAP Notes 7642, 20534, 23342, 33154, and 67766
guess this info will help you,there is one graphic which actually explain the hierarchy of authorisation,i will find some time out to let u know more info about the authorisation
but if u sit with ur BASIS guy then u can learn lot of things in PFCG
i guess u r a basis guy,then its not a problem
best regards
ashish

Could not contact the agent. check wheather the url connected to the agent.

i am having the problem with the error message " could not contact the agent. check wheather the url connected to the agent is null". This error occurs while login with credentials, and because of this i cant open the em page, please help me to solve this problem

Hi,
Can you please confirm the following:
1. Are you trying to login to Grid Control, when you are getting this error?
2. If yes, what was the version of Grid Control?
3. Provide the output of commands:
./emctl status oms -details
./emctl status agent
Best Regards,
Venkat

R12.1.1 staging complete! How to check whether the stage is Good

Hi Gurusl,
I have completed staging R12.1.1 for Hp unix B.11.31. I want to know how to check whether the stage is good for installation or whether it is corrupted. Is there any metalink note or script from where we can check it. Ur help will be highly appreciated. Thanks in advance
regards,

Hi,
Please refer to (Note: 802195.1 - MD5 Checksums for R12.1.1 Rapid Install Media).
Regards,
Hussein

I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?

I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?
I have a sony handicam and I imported the clips to iMovie and they lost quality and converted the audio to stereo. I want to import the project to final cut X and import the AVCHD in 1080p and surround sound and export the movie in bluray. Can I relink the clips without editing everything again?
thanks!

Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view.
Photos that were synced from a computer are deleted by moving/removing/de-selecting them from where they were synced from and then re-syncing. If you want to remove them all then normally you could just sync an empty folder (in terms of photos) to the iPad, but as you don't want to sync at the moment you can't do that.
You can reset the iPad back to factory settings and start from scratch with it : Settings > General > Reset > Erase All Content And Settings

How to check if the retro period is from 01 or earlier in PCR

Dear All,
How to check in the PCR if the retro for the employee is starting from the previous year or from the period 01 of this year. The PCR in the system is as below:
I wanted to execute some PCR only if the retro period is from 01 of current year or from the previous year. How do i check this condition in PCR.. Can you please send some sample code of PCR..
Regards,
Vidya..

Hi Vidya,
Please check us out to get answers to all your SAP knowledge needs. We are launching shortly.
http://www.linkedin.com/e/gis/889747
http://www.twitter.com/spinact
Best,
Monty

How to check for the sub folder in the document library Is already Exist using CSOM?

Hi,
My requirement is to create the folder and sub folder in SharePoint document library. If already exist leave it or create the new folder and the subfolder in the Document library using client side object model
I able to check for the parent folder.
But cant able to check the subfolder in the document library.
How to check for the sub folder in the document library?
Here is the code for the folder
IsFolder alredy Exist.
private
string IsFolderExist(string InputFolderName)
string retStatus = false.ToString();
try
ClientContext context =
new ClientContext(Convert.ToString(ConfigurationManager.AppSettings["DocumentLibraryLink"]));
            context.Credentials =
CredentialCache.DefaultCredentials;
List list = context.Web.Lists.GetByTitle(Convert.ToString(ConfigurationManager.AppSettings["DocumentLibraryName"]));
FieldCollection fields = list.Fields;
CamlQuery camlQueryForItem =
new CamlQuery();
            camlQueryForItem.ViewXml =
string.Format(@"<View Scope='RecursiveAll'>
<Query>
                                        <Where>
<Eq>
<FieldRef Name='FileDirRef'/>
<Value Type='Text'>{0}</Value>
                                            </Eq>
</Where>
</Query>
                            </View>",
@"/sites/test/hcl/"
+ InputFolderName);
            Microsoft.SharePoint.Client.ListItemCollection listItems = list.GetItems(camlQueryForItem);
            context.Load(listItems);
            context.ExecuteQuery();
if (listItems.Count > 0)
                retStatus =
true.ToString();
else
                retStatus =
false.ToString();
catch (Exception ex)
            retStatus =
"X02";
return retStatus;
thanks
Sundhar

Hi Sundhar,
According to your description, you might want to check the existence of sub folder in a folder of a library using Client Object Model.
Please take the code demo below for a try, it will check whether there is sub folder in a given folder:
public static void createSubFolder(string siteUrl, string libName, string folderServerRelativeUrl)
ClientContext clientContext = new ClientContext(siteUrl);
List list = clientContext.Web.Lists.GetByTitle(libName);
CamlQuery camlQuery = new CamlQuery();
camlQuery.ViewXml =
@"<View Scope='RecursiveAll'>
<Query>
<Where>
<Eq>
<FieldRef Name='FSObjType' />
<Value Type='Integer'>1</Value>
</Eq>
</Where>
</Query>
</View>";
//camlQuery.FolderServerRelativeUrl = "/Lib1/folder1";
camlQuery.FolderServerRelativeUrl = folderServerRelativeUrl;
ListItemCollection items = list.GetItems(camlQuery);
clientContext.Load(items);
clientContext.ExecuteQuery();
Console.WriteLine(items.Count);
if (0 == items.Count)
//create sub folder here
Best regards
Patrick Liang
TechNet Community Support

How to check wheather the project is having 'AUC' or not.

Similar Messages

Maybe you are looking for