How to Check whether laptop is OEM or Not ?

I had bought a Envy 15 notebook through flipkart. But due to technical problem I had refreshed my pc using HP recovery. At last I cant activate windows 8. When I contacted Microsoft technical support I had given my product ID and they told me that it was not a product of OEM. Whats the solution for this problem ?

Hi,
It will blow air out. You can use you hand or a piece of tissue to check. Normally fan will only work when machine is getting warmer. You may run machine for 10 or 15 mins then check. BUT making beeping noise at startup is not a good news, what is the actual noise ? How many times ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

How to check whether portal user exists or not using UM API.

Hi Experts,
Let us say i need to create an user account "PortalUser",i know how to create an user,setting first name,lastname,password for that.
but here before creating the portal user, i need to check whether that user exists or not.If user already exists ,then i need to skip the below for creating the user.
IUserFactory userFact = UMFactory.getUserFactory();
IGroupFactory groupFact = UMFactory.getGroupFactory();
IRoleFactory roleFact = UMFactory.getRoleFactory();
IUser tuser = userFact.getUserByLogonID("PortalUser");
IUserMaint newUser = userFact.newUser("PortalUser");
newUser.setFirstName("PortalUser");
newUser.setLastName("Test");
newUser.setEmail("PortalUser.Testatgmaildotcom");
//Locale PortalLanguage = new Locale(Lang.toLowerCase(), "");
Locale PortalLang=new Locale("en");
newUser.setLocale(PortalLang);
newUser.save();
newUser.commit();
IUserAccount userAcc = UMFactory.getUserAccountFactory().newUserAccount("PortalUser", newUser.getUniqueID());
userAcc.setPassword("test1test$");
userAcc.save();
userAcc.commit();
Thanks in advance.
Thanks
Sony.

Hi,
Try this code,
IUserFactory factory = UMFactory.getUserFactory();
IUser user = factory.getUserByLogonID(userId);
lastName = user.getLastName();
firstName = user.getFirstName();
refer this pdf,its very helpful
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/webinars-nw-rig/using%20the%20user%20management%20api%20with%20ep%20applications%20-%20webinar%20powerpoint.pdf
Regards,
Sunaina Reddy T

How to check whether a Record Exists or not in Ztable

Hi all,
I have Req like this
In ZTable i have 2 fields * Legacy System , Legacy Material No*
Environment Value is coming in one of the field in Idoc
The logic is if the Environment Value is UK and a Record Exists on the ZTable for Legacy Sysyetm = Leg1 means i have send Legacy Material No , else Send 01
Please suggest me the process for this
REgards
Vamsi
Edited by: Vamsi Krishna on May 19, 2009 5:31 PM

Hi Michal / Aamir,
Thanks for your replies.
The ZTable is at R/3 side only, iam using RFC Lookup for this, but iam bit confuse on how to construct the logic to check whether there is a record Exists or not on Ztable
Logic shld be If the Environment value is UK and a record exists on the Ztable for Legacy system "ABC" means then send Legacy material number else send 01
In Table we will have the fields Legacy System Legacy Material No & Environment value is coming from Idoc itself( Ex: UK or US)
Regards

How to check whether a file exists or not

i am in an image uploading utility. i hav succesfully uploaded the image to the server directory (say /uploads). but when displaying the uploaded image, i wanna show the picture only if the image exits (bcoz for some records there is no image). so i hav used this code
if(new File("uploads/1.jpg").exists())
out.print("image exists");
but its not working for me. i got it working fine when i give the full path "D:/Tomcat/webapps/diary/admin/uploads/1.jpg". but i think giving this absolute path is not an efficient method bcoz its a web application, bcoz i may not be able get the absolute path always. so how can i do this by specifieing the relative path
help me ASAP if u can
aleens

Haii ameen
This is one way to rectify your problem..
if(new File("uploads/1.jpg").exists())
out.print("image exists");
instead of this u can write like
<%
ServletConfig cf=getServletConfig();
ServletContext c=cf.getServletContext();
if(new File(c.getRealPath("uploads")+"/test.txt").exists())
out.print("image exists");
%>If u are not clear of what it is done let me know..i will xplain to you furthur...
Happy New Year
Shanu

How to check whether Output ES is working or not.

I am able to see Output ES in the services list of the admin console of my server. Please let me know how to check whether this is working or not.
Regards,
Shabeer

LiveCycle ES2 (and LiveCycle ES) ship with three undersold and unadvertised web applications that are VERY useful. Each is referred to as an Installation Verification Sample (or IVS) but they are great testing tools you can use during development and QA. There is
1) Assembler IVS,
2) Forms IVS, and
3) Output IVS
Output IVS looks like this...
The pattern for deploying and using all three IVSs is very similar as what I am about to describe for Output IVS. The following directions apply to the JBoss turnkey on Windows.
1) go to C:\Adobe\Adobe LiveCycle ES2\deploy and locate adobe-output-ivs-jboss.ear
2) copy adobe-output-ivs-jboss.ear to C:\Adobe\Adobe LiveCycle ES2\jboss\server\lc_turnkey\deploy
3) if necessary, start LiveCycle
4) open a browser and go to http://localhost:8080/OutputIVS/
5) click Check/Change your preferences
6) add Admin Credentials
7) click Save
8) click Test your form designs
9) Select an .xdp from Form designs
10) Click Use EJB (or Use Web Service if you feel so inclined) to invoke LiveCycle Output ES2
Steve

How to check whether stock cover MRP requirements

Hi Everybody,
Could you please tell me how to check whether stock cover MRP requirements?
My user hope to block GR for PO. Because before GR, customer decrease their order qty. However, it is difficult if buyer decrease the PO qty manually. So, they hope SAP can calculate and block GR.
I know we can add the control in user exit of MIGO. However, I dont know how to check the stock whether cover MRP requirements. anybody can tell me what is the standard function? of course, it is okay if you have other solution such as via standard configurations.
Thank you in advanced.
Regards
Henry

Hello Ravi,
Thank you for your reminder.
We have double confirmed with our client. It is very difficult to using Scheduling Agreements instead of PO. because lots of job have to be changed such as
1. Share our Scheduling Agreements with suppliers on a new system such as Internet.
2. PO release strategy will be put into Scheduling Agreements. I dont know how to to reach this.
Customer may random decrease their order Qty even if they have sent formal order to us. So, we have to block GR for our supplier even if sent PO already. In OEM industry, it is truth already.
Hello BK,
I know in MD04, we can manually list. But, please tell me which function (SE37) can identify. We hope can call the function in user exit of MIGO.
Regards
Henry

R12.1.1 staging complete! How to check whether the stage is Good

Hi Gurusl,
I have completed staging R12.1.1 for Hp unix B.11.31. I want to know how to check whether the stage is good for installation or whether it is corrupted. Is there any metalink note or script from where we can check it. Ur help will be highly appreciated. Thanks in advance
regards,

Hi,
Please refer to (Note: 802195.1 - MD5 Checksums for R12.1.1 Rapid Install Media).
Regards,
Hussein

How to check whether transport path exist between two systems in sld??

Hi,
I have two systems namely 'A' and 'B' and created business systems for both of them.Then i created transport path between the two systems.How i check whether what i have done is right in SLD.

<b>WRT to CMS</b>
am not sure with this but u can try:
1. Start CMS: http://<host>:<J2EE Engine http port>/webdynpro/dispatcher/sap.com/tcSLCMS~WebUI/Cms.
2. Goto lansdscape configurator and check there
Message was edited by:
Prabhu S

How to check whether follow on document is created for sc or po,is there any table or fm available?

How to check whether follow on document is created for sc or po,is there any table or fm available?

Hello Venu
Check FM: BBP_PD_SC_GETDETAIL and BBP_PD_PO_GETDETAIL table E_HEADER_REL
Check this: SRM Shopping cart and PO tables link
Regards

How to check whether there r new txt files in a folder n file creation date

How to check whether there r new text files in a specified folder and what is the date of creation of the text file.........?

Hi
I have been searching for a solution to find the date of creation of a file for over 6 months now but haven't found it. So I presume that it is not possible though I havent found any authentication of my assumption in any document.
Cheers!
Shailesh

I wanted to know how to check my laptop's (hp pavillion g-6) on internet??

i wanted to know how to check my laptop's (hp pavillion g-6) on internet??

Hi,
There are dozens things you can check, which one do you want to check ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to check whether calendar is being used in any of the sap application

Hello All,
We are having few factory calendars. However some of the calendar having valid to year 2010. Can you please let me know how to check whether these calendar is being used in any of the sap application/module
kindly reply as early as possible
Regards
Girish

Hi RKS
yesterday BLOG by our SUMMER WANG helps every SRM consultant to debug the PO error
/people/summer.wang/blog/2010/05/11/trouble-shooting-of-srm-po-transfer-error
Good work Summer wang !!
Muthu

How to check Whether the File is in Progress or used by some other resource

Hi All,
I am retrieving a file from the FTP server using Apache commons FTP.
I need to check whether the file is fully retrieved or in progress.
for now i can able to use the file which is partially retrieved. it is not throwing any file sharing exception or i am unable to find whether it is in progress.
How to check whether the file is in progress ? or The file is accessed by some other resource ?
Pls Help me.
Thanks,
J.Kathir

Hi Vamsi,
Explicitly such kind of requirement has not been catered and i dont think you would face a problem because any application that is writing to a file will open the file in the read only mode to any other simultaneous applications so i think your concerns although valid are already taken care off .
In the remote case you still face a problem then as a work around. Tell the FTP administrator to set the property to maximum connections that can be made to ftp as one. I wonder if you have heard of the concept of FTP handle , basically the above workaround is based on that concept itself. This way only one application will be able to write.
The file adapter will wait for its turn and then write the files.
Regards
joel
Edited by: joel trinidade on Jun 26, 2009 11:06 AM

How to check whether my sol man installation is on sol man 7.0 or?

Hellol All,
Can anyone help me How to check whether my sol man installation is on sol man 7.0 or sol man 7.0 EHP1.
Thank you,
Srihari

Hi,
Your system status should tell you that. Any logged in screen of your solution manager system --> Status. Component Version should be as "SAP EHP 1 for SAP Solution Manager 7.0" to be Ehp1 or "SAP Solution Manager 7.0"
Hope this answers your question.
Feel free to revert back.
-=-Ragu

How to check whether the Application Server directory exits or not

Hi,
I have a selection screen in which I give the Application server file name(UNIX file) as input. Here, I would like to check whether the Server directory exists or not.
Let us say, the path I gave in the selection screen is /usr/sap/tmp/testfile.txt . Here, the file name is testfile.txt and the server directory is /usr/sap/tmp . I would like to check whether this directory /usr/sap/tmp exists in the server or not. I am not bothered about the file name as I am going to write data into the file. I am mainly concerned about whether the directory exists in the server or not. and one more thing... this is the Application Server path not the Local path.
Can anyone help me on the same how to check whether the server directory exists or not.
Thanks in advance.
Best Regards,
Pradeep.

Also you can use the FM EPS_GET_DIRECTORY_LISTING for this purpose.
Store the directory name
    l_dpath = p_file+0(l_no).
Validate the directory of the application server
    CALL FUNCTION 'EPS_GET_DIRECTORY_LISTING'
      EXPORTING
        dir_name               = l_dpath
      TABLES
        dir_list               = l_i_dlist
      EXCEPTIONS
        invalid_eps_subdir     = 1
        sapgparam_failed       = 2
        build_directory_failed = 3
        no_authorization       = 4
        read_directory_failed = 5
        too_many_read_errors   = 6
        empty_directory_list   = 7
        OTHERS                 = 8.
If any problem occurs with the directory then display proper
error message
    IF sy-subrc <> 0.
    Display error message
      MESSAGE e018 WITH 'Problem with directory entered'(008).
    ENDIF. " sy-subrc <> 0
Regards,
Joy.

How to Check whether laptop is OEM or Not ?

Similar Messages

Maybe you are looking for