How to check which software pack I am running on UC560?

I need to figure out if my UC560 needs a software pack upgrade. The show version on the device console shows following. What software pack does it map to?
Cisco IOS Software, UC500 Software (UC500-ADVIPSERVICESK9-M), Version 15.1(4)M5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 04-Sep-12 20:45 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)XA3, RELEASE SOFTWARE (fc1)
dcVAST-UC560 uptime is 6 weeks, 3 days, 14 hours, 56 minutes
System returned to ROM by power-on
System restarted at 17:32:32 CST Thu Feb 20 2014
System image file is "flash:/uc500-advipservicesk9-mz.151-4.M5"
Last reload type: Normal Reload
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected]
Cisco UC560-T1E1-K9 (MPC8378) processor (revision 0x100) with 497664K/26624K bytes of memory.
Processor board ID <Removed>
MPC8378 CPU Rev: Part Number 0x80C4, Revision ID 0x21
64 User Licenses
4 Gigabit Ethernet interfaces
24 Serial interfaces
2 terminal lines
1 Channelized T1/PRI port
1 Virtual Private Network (VPN) Module
4 Voice FXO interfaces
4 Voice FXS interfaces
1 Voice MoH interface
1 cisco service engine(s)
256K bytes of non-volatile configuration memory.
250880K bytes of ATA CompactFlash (Read/Write)

Refer to this: https://supportforums.cisco.com/document/36746/uc-500-software-packs
You are one software pack behind up to date.

Similar Messages

  • How to identify which service pack is installed in BO XI R2

    Hi,
    I am currently workng in BO XI R2. Can any one please let me know how to find which service pack is installed ?
    Below is the version number mentioned in metrics under Central management server in CMC.
    Version: 11.5.10.1263
    Thanks
    Anand

    Hi,
    take this Version Number and post it into the "Help & Support" are of the SAP Service Marketplace.
    If all of your Servers have Version 11.5.10.1263 you are running on SP4.
    For more Information check SAP Note -  1318289.
    Regards
    -Seb.

  • How to check which version of hyperic is installed , hyperic 32 bit or 64 bit version on solaris

    how to check which version of hyperic is installed , hyperic 32 bit or 64 bit version on solaris

    If you have only a single home, the quickest/easiest way is probably just to check the properties of %ORACLE_HOME%\odp.net\bin\2.x\oracle.dataacess.dll
    Or are you asking how to check it at runtime?
    If you want to see externally what is actually loaded by an app you can use process explorer
    http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
    If you want to check it in the app itself:
    http://stackoverflow.com/questions/383686/how-do-you-loop-through-currently-loaded-assemblies
    Hope it helps,
    Greg

  • How can check which patch install in oracle 10g

    hi experts,
    i have use oracle 10g , i hv patch information but how can check which patch install ?

    Run following command , it will give you list of patches installed on Oracle Home
    cd ORACLE_HOME/OPatch
    opatch lsinventory
    For patchset and CPU patch , check/query DBA_REGISTRY_HISTORY
    Virag

  • How to check which version of Jdk installed on the machine?

    How to check which version of Jdk installed on the machine?
    & Which version of Oracle Insatlled on my machine?

    String version = System.getProperty("java.version"); %

  • How to Check MRP/MPS ASCP planning manager running or not

    Hi Team,
    How to Check MRP/MPS ASCP planning manager running or not.
    Could you please navigation for the same.
    Regards
    Jagadeesh

    Hi Jagadeesh,
    You can check whether the planning manager is running or not from the following navigation:
    Material Planner (R)  -> Setup -> Planning Manager
    You can get more information on planning manager from the below note:
    11.5 - Planning Manager Related Issues - A Complete Troubleshooting Guide (Doc ID 131051.1)
    Hope that helps!!
    Regards,
    Mohan Balaji
    NOTE: Please mark the post as Helpful or Answered if the update has really helped you. This would also bring the thread to logical conclusion and will be helpful for the viewers.

  • How to check which PSA is having more data

    Hi,
    I want to delete the PSA, and check which PSA is having huge space is occupied, from table RSTSODS we can check the availble psa`s how can we check PSA database.
    we have to configure in db02 ?
    Regards,
    Vamsi

    For checking the which PSA having more data then run ST14 tcode for getting top 30 objects which has PSA also
    in that case you have set a procedure to overcome that...by inlcuding those things in Process chain so that deletion will happen if the data gets older by certain days...if not you can go with any program where you can use FM's given SAP .. so that your system wont go into oversize...

  • How to check  which column data differs from master table and archive table

    Hi All,
    i have two tables, table a (a1 number,a2 varchar2,a3 varchar2) and table b (b1 number,b2 varchar2,b3 varchar2).
    how to check the data in both the table are same( including all columns).
    data in a.a1 is same as b.b1 and a.a2 is same as b.b2 like that.
    if they not same , i need to know which field differs.
    Kindly Share ur ideas.

    887268 wrote:
    thanks Sven W. ,
    above reply clearly shows what my question is.
    one column must be primary key, based on that key i need to find out which are the fields having different data..
    im strugling with this, i tried the following already, but not able to get.
    select the columns from a MINUS select the columns from b.
    -- from this i can find whether the difference occurred or not.
    but i cant able to get which are the fields value changed.Good. Then you would match the rows using the PK column and need to compare the columns
    Instead of a MINUS + UNION ALL + MINUS we can now use a FULL OUTER JOIN
    It is a little task to write out all column names, but 40 columns can be handled.
    This statement would show you both tables with matching rows on the same line.
    select a.*, b.*
    from a
    FULL OUTER JOIN b on a.id = b.idNow filter/check for mismatches
    select case when a.col1 != b.col1 then 'COL1 value changed'
                    when a.col2 != b.col2 then 'COL2 value changed'
                    when a.col3 != b.col3 then 'COL3 value changed'
             end as compare_result
            ,a.*, b.*
    from a
    FULL OUTER JOIN b on a.id = b.id
    /* return only non matching columns */
    where (a.col1,a.col2,a.col3) != (b.col1,b.col2,b.col3) You might need to add nvls to take care of null values. Test this!
    Another way could be to group upon the primary key
    select *
    from (
      select id 
               ,count(distinct col1)-1 cnt_col1
               ,count(distinct col2)-1 cnt_col2
               ,count(distinct col3)-1 cnt_col3
       from
         select 'A' source, a.*
         from a
         UNION ALL
         select 'B' source, b.*
         from b)
       group by ID
    /* only records with differences */
    where 1 in (cnt_col1, cnt_col2, cnt_col3)
    ;The count columns will hold either 1 or 0. If it is 1 then this column has a difference.

  • How to check which administrator had modified the AD Group properties

    Dear Sir,
    Some one had modified a Distribution group (removed email address). I checked it in group properties and last modified was on 22/09/14. How to find which administrator had modified.
    I dont have access to domain controller. Is there any way to find it?
    thanks in advance.
    Karan

    Hello,
    this will be logged on DCs and also auditing must be configured correct that this will show up in the event viewer from a DC.
    Without access to the DC contact your administrators and let them find out.
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://blogs.msmvps.com/MWeber
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
    Twitter:  

  • How to check which query is consuming most resources....

    Hi guys how can i check which query is consuming most resources , run by which user and how to kill that....
    Khurana

    1)     At the first stage, login to the server and at the OS level I run commands like TOP and see the overall performance of the Server. From this one can know the Total CPU Memory, CPU Usage, Memory Available, and Swap Memory Available and how busy the CPU is.
    2)     Once you identify the top processes in the CPU, relate them to ORACLE using V$PROCESS.SPID = OS Process ID to get the V$PROCESS.ADDR and join this with the V$SESSION.PADDR to get the V$SESSION.SID and SERIAL# columns.
    3)     Then enable the Session Trace using DBMS_SYSTEM.SET_SQL_TRACE_IN_SESSION.
    4)     look on the Trace File using the TKPROF. During this sort the Trace File using various options like EXEELA/DSK, PRSELA/DSK, FCHELA /DSK.
    5)     Once you identify the expensive SQL statements, inform the user about it and KILL the respective job.

  • How to check which is th best method to use in LSMw and the file

    Hi all,
    I am new to LSMW,
    Can know me when i get the file , how to check the which is the Best method ( Batch input, Direct input,BAPI, IDOC)  have to use in LSMW .
    How to check the input file is completely filled and how to check whether it is correct and also how to Prevalidation check has to be done fior the file before uploading.
    Can you provide any documents LSMW also Apprecited.
    Regards,
    Madhavi

    Hi Madhavi,
    To check Correctness & completeness of the file:
    1. The input file structure should be same as source structure what you defined whicle creating LSMW.
    2. Check the following steps to assure the field mapping is done correctly.
    a) Maintain field mapping & conversion rule
    b) Check 'Display Read data'
    c) Check ' Display Converted data''
    Please note LSMW is a tool, which will simply upload the data whatever you are providing. So you need to be careful while making your file and validate it outside SAP ( before upload start)
    Pradeep D

  • How to check which table is used

    After creating RFQ , i want to check which table is used  in creating RFQ.
    how can i see that data has gone or not into the database table.

    Hi
    See the Table EKKO and EKPO only
    with EKKO-BSTYP = A
    Regards
    Anji

  • How to check which function was used in a function based index.

    Hi how can i check which function was used in a function based index created on a column.
    Thanks

    Hi,
    What is your requirement... !!
    Bascially performing a function on an indexed column in the where clause of a query guaranteed an index would not be used. From Oracle 8i onwards introduced Function Based Indexes to counter this problem.
    Any how check this..you will get an idea..
    http://www.akadia.com/services/ora_function_based_index_2.htm
    http://www.oracle-base.com/articles/8i/FunctionBasedIndexes.php
    -Pavan Kumar N

  • How to check which user has the privilege to execute a stored procedure?

    I am using Oracle 7 and I would like to check which user has the privilege to execute a stored procedure. How can I check it? Is there any view I can query for?
    Alex Hung

    Please check DBA_SYS_PRIVS.
    SQL> select * from dba_sys_privs
    2 where grantee='HARY';
    GRANTEE PRIVILEGE ADM
    HARY EXECUTE ANY PROCEDURE NO
    ....

  • How to check which table is using my table

    Hi,
    I have a table say Temp_Rd.
    How do I check which table is using my table Temp_Rd??
    Which table is using my Temp_Rd as the dependencies in the sql database?
    Thank you very much.

    Oops, pardon me for asking the questions unclearly.
    Its like some table Foreign Key is references to my this table Temp_Rd.
    Eg,
    CONSTRAINT "FK_SomeTable" FOREIGN KEY ("ID")
         REFERENCES "Temp_Rd" ("ID")
    How do I know which are the some table?
    I hope I explain it better this time.
    Sorrie about it.

Maybe you are looking for