How to check which table is used
After creating RFQ , i want to check which table is used in creating RFQ.
how can i see that data has gone or not into the database table.
Hi
See the Table EKKO and EKPO only
with EKKO-BSTYP = A
Regards
Anji
Similar Messages
-
How to check which table is using my table
Hi,
I have a table say Temp_Rd.
How do I check which table is using my table Temp_Rd??
Which table is using my Temp_Rd as the dependencies in the sql database?
Thank you very much.Oops, pardon me for asking the questions unclearly.
Its like some table Foreign Key is references to my this table Temp_Rd.
Eg,
CONSTRAINT "FK_SomeTable" FOREIGN KEY ("ID")
REFERENCES "Temp_Rd" ("ID")
How do I know which are the some table?
I hope I explain it better this time.
Sorrie about it. -
How to check which function was used in a function based index.
Hi how can i check which function was used in a function based index created on a column.
ThanksHi,
What is your requirement... !!
Bascially performing a function on an indexed column in the where clause of a query guaranteed an index would not be used. From Oracle 8i onwards introduced Function Based Indexes to counter this problem.
Any how check this..you will get an idea..
http://www.akadia.com/services/ora_function_based_index_2.htm
http://www.oracle-base.com/articles/8i/FunctionBasedIndexes.php
-Pavan Kumar N -
How to check which app is using my network, how to check which app is using my network
I find my net very slow on my mac. so when i open the activity monitor i find network being used but no app seemes to be open which is using the net. so how do i check which app is using the network?
Download Little Snitch
-
How to check which Table & Field is populating Data source
Hi,
My requirment is to check from which Table and Which field the data is extracted in the data source
Data Source : 0MAT_PLANT_ATTR
Field in Data Source : MINBE
Now i want to check from where (Table/Field) in R/3 is populating the Field MINBE in Data source 0MAT_PLANT_ATTR
How can i do thatHi,
Since you have the extract structure and the extractor, you can try Extractor Checker RSA3.Execute ST05 (activating SQL Trace), switch on the trace and execute the extractor checker. Once the extractor checker presents the results
switch off trace. The clcik on Display trace and you will see all the tables that were hit by the extractor checker to retrieve data and present it to you.
Note: Set the break point in the Extractor Function module.
View the ST05 Extended Trace list. The Object name shows the Tables accessed.
Hope this helps.
Thanks,
JituK -
Hi Gurus,
Need some advice. In SM69, I could see a list of jobs define by SAP and also by the customer. SM69 refers to table SXPGCOTABE. When I view the table from SE16, it only shows the jobs define by SAP not by the customers. Could anyone tell me where is the job listed by customers define.
Thanks in advance,
IA.Hi aRs,
Table TBTCO refers to list of job schedule in SAP which is not something I wanted.
SM69 refers to external command. However when I went to table SXPGCOTABE (for SM69) it only refes to SAP define command.
Anyway, thanks. -
How to check small table scan full table scan if we will use index in where clause.
How to check small table scan full table scan if i will use index column in where clause.
Is there example link there i can test small table scan full table if index is used in where clause.Use explain plan on your statement or set autotrace traceonly in your SQL*Plus session followed by the SQL you are testing.
For example
SQL> set autotrace traceonly
SQL> select *
2 from XXX
3 where id='fga';
no rows selected
Execution Plan
0 SELECT STATEMENT Optimizer=ALL_ROWS (Cost=13 Card=1 Bytes=16
5)
1 0 PARTITION RANGE (ALL) (Cost=13 Card=1 Bytes=165)
2 1 TABLE ACCESS (FULL) OF 'XXX' (TABLE) (Cost=13 Card
=1 Bytes=165)
Statistics
1 recursive calls
0 db block gets
1561 consistent gets
540 physical reads
0 redo size
1864 bytes sent via SQL*Net to client
333 bytes received via SQL*Net from client
1 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
0 rows processed -
How to find which datasource are using tables AFRU ,CAUFV and AUFM
*how to find which datasource are using tables AFRU ,CAUFV and AUFM*
Hi,
You can enter your table names in SE11 transaction and click "Display" and again click "Where -Used-List". Then it will show all the places where these tables are used(Datasources)
Hope this helps.....
Regards,
SUman -
How to find which datasource is using table JCDS?
How to find which datasource is using table JCDS?
Hi,
Please find the below link and identify whether will it meet your requirement or not ... If it meets your requirement then I can provide you more documents related to the same which we have in our project. We were using the same for Plant Maintanance project...
For this report the required information is gathering from the different data sources from the ECC system. This report requires object status functional location attributes, Equipment attributes and some specific information apart from normal transaction data for an order.
u2022 Main feeding data sources for this report are 2LIS_17_ORDER and 2LIS_18_ORDER.
u2022 Requires the object status data (system status, number object status and un-number system status) is feeding from different DSO where the status data is staging with different data flow.
u2022 Requires the Order planned end date which is dependent on the operation planned completion date. so we are feeding this field from Operationu2019s DSO where the planned date is staging with different data flow.
u2022 Required characteristic data and attributes of the Functional location is getting from the master data .The 0FUNCT_LOC is updating by master data data sources
u2022 Required standard class of the functional location is updating from other DSO where the classification data is staging with the help of different data flow.
2LIS_17_ORDER and 2LIS_18_ORDER Data flow Details : No enhancement was done for these data sources .
Status Data Flow Details:
The status data is staged because ,this dat is required for the reports based on the Orders, Operations , Notifications, Functional Location and Equipment.
To load suitable data to different DSOs from the Status DSO we maintain the Filters for status profile and status at DTP level.
Required status change dates are deriving based on changed on date ,system status while loading from status DSO to Order DSO.
The system status ,Number object status and un- numberd object status are feeding from status DSO only.The status DSO is updating by u20180TE_OBJ_STATUS_HISTu2019.This Is based on the tables JCDS,JSTO and T000.
JCDS MANDT = JSTO MANDT
JCDS OBJNR = JSTO OBJNR
T000 MANDT = JCDS MANDT
This DS has enhanced for the below two fields
1. Order Number
2. Operation/Activity Number
The Logic to populate the above two fileds is as below.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e4/1522bae6aa46b8802dca454e846d58/frameset.htm
regards
BVR -
In ecatt - how to check at database level using ABAP
Hi,
How to check at database level using ABAP in Ecatt tool.
say,for example I want to check a particular sales order is invoiced or not ,at the database level and if it is invoiced I have stop proceeding to invoicing of that sales order number.
Could anybody suggest on this with an example?
thanks.Hi,
you can use the command GETTAB to access single db records.
Full specified or partitial specified keys can be use at GETTAB. It will return always only one record, also if a couple could match your selection.
For more advanced scenarios you can also use eCATTs Inline ABAP. In a block between the commands ABAP. ENDABAP. you can code ABAP statements, e.g. SELECT ... INTO TABLE ...
eCATT script parameters of type 'V' defined in that script using ABAP/ENDABAP will be transfered into the ABAP block and back to script after ABAP perform.
Best regards
Jens -
how to check which version of hyperic is installed , hyperic 32 bit or 64 bit version on solaris
If you have only a single home, the quickest/easiest way is probably just to check the properties of %ORACLE_HOME%\odp.net\bin\2.x\oracle.dataacess.dll
Or are you asking how to check it at runtime?
If you want to see externally what is actually loaded by an app you can use process explorer
http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
If you want to check it in the app itself:
http://stackoverflow.com/questions/383686/how-do-you-loop-through-currently-loaded-assemblies
Hope it helps,
Greg -
How to check the tables we have created in JDBC??
I have created a table called COFFEE2 in a datasource called temp which is in SQL server...How to check the table values??
i went into administrative tools and odbc cource then i could see the data source i have created but how to see the table??
Can anyone help??
thanxHmm.. not sure that I understand the problem.
Call getConnection on the DataSource, and then execute the select query on the connection.
Kaj -
How to check with table for cursor..?
How to check with table for cursor..?
Here I have Table temp_final_plan
Here i want to update if already exit...below is the procedure....
CREATE OR REPLACE PROCEDURE spu_final_profit_plan
AS
-- Constant declarations
ln_errnum number := 0;
-- Variable declarations
ls_errmsg app_errors.err_msg%TYPE;
ls_appmsg app_errors.app_msg%TYPE;
ls_appid app_errors.app_id%TYPE;
-- Cursor declaration for final_update_el
CURSOR cur_final_update_el IS
select '910' ent,
'9127316' center,
post_acct,
sum(avg_mtd_01) sum_avg_mtd_01,
sum(avg_mtd_02) sum_avg_mtd_02,
sum(avg_ytd_01) sum_avg_ytd_01,
sum(avg_ytd_02) sum_avg_ytd_02
from mon_act_cypy
where rec_type = 'A'
and sum_flag = 'D'
and yr = '2008'
and substr(ctr_or_hier, 1, 2) = 'el'
and ent || sub_ent in
(select ent || sub_ent
from ent_ref
where roll_ent || roll_sub_ent = '999100')
group by post_acct
having sum(avg_mtd_01) <> 0
or sum(avg_mtd_02) <> 0
or sum(avg_ytd_01) <> 0
or sum(avg_ytd_02) <> 0;
-- Cursor declaration for final_update
CURSOR cur_final_update IS
select b.plan_ent b_plan_ent,
b.plan_ctr b_plan_ctr,
a.post_acct a_post_acct,
sum(a.avg_mtd_01) sum_avg_mtd_01,
sum(a.avg_mtd_02) sum_avg_mtd_02,
sum(a.avg_ytd_01) sum_ytd_mtd_01,
sum(a.avg_ytd_02) sum_ytd_mtd_02
from mon_act_cypy a,
plan_unit_tbl b
where a.ent || a.ctr_or_hier = b.ent || b.ctr_or_hier
and a.rec_type = 'A'
and a.sum_flag = 'D'
and a.yr = '2008'
and b.hier_tbl_num = '001'
and a.ent || a.sub_ent in
(select ent || sub_ent
from ent_ref
where roll_ent || roll_sub_ent = '999100')
group by b.plan_ent, b.plan_ctr, a.post_acct
having sum(a.avg_mtd_01) <> 0
or sum(a.avg_mtd_02) <> 0
or sum(a.avg_ytd_01) <> 0
or sum(a.avg_ytd_02) <> 0;
-- Begin the procedure body
BEGIN
-- Insert / Update final profit plan for final_update query using cursor
FOR rec_final_update_el IN cur_final_update_el
LOOP
EXIT WHEN rec_final_update_el%NOTFOUND;
IF rec_final_update_el. THEN
UPDATE temp_final_plan
SET sum_avg_mtd_01 = rec_final_update_el.sum_avg_mtd_01,
sum_avg_mtd_02 = rec_final_update_el.sum_avg_mtd_02,
sum_avg_ytd_01 = rec_final_update_el.sum_avg_ytd_01,
sum_avg_ytd_02 = rec_final_update_el.sum_avg_ytd_02,
WHERE ent = rec_final_update_el.ent
AND center = rec_final_update_el.center
AND post_acct = rec_final_update_el.post_acct;
ELSE
INSERT INTO temp_final_plan VALUES(rec_final_update_el.ent,
rec_final_update_el.center,
rec_final_update_el.post_acct,
rec_final_update_el.sum_avg_mtd_01,
rec_final_update_el.sum_avg_mtd_02,
rec_final_update_el.sum_avg_ytd_01,
rec_final_update_el.sum_avg_ytd_02);
END IF;
END LOOP;
-- Insert / Update final profit plan for final_update query using cursor
FOR rec_final_update IN cur_final_update
LOOP
EXIT WHEN rec_final_update%NOTFOUND;
IF rec_final_update. THEN
UPDATE temp_final_plan
SET sum_avg_mtd_01 = rec_final_update.sum_avg_mtd_01,
sum_avg_mtd_02 = rec_final_update.sum_avg_mtd_02,
sum_avg_ytd_01 = rec_final_update.sum_avg_ytd_01,
sum_avg_ytd_02 = rec_final_update.sum_avg_ytd_02,
WHERE ent = rec_final_update.b_plan_ent
AND center = rec_final_update.b_plan_ctr
AND post_acct = rec_final_update.a_post_acct;
ELSE
INSERT INTO temp_final_plan VALUES(rec_final_update.b_plan_ent,
rec_final_update.b_plan_ctr,
rec_final_update.a_post_acct,
rec_final_update.sum_avg_mtd_01,
rec_final_update.sum_avg_mtd_02,
rec_final_update.sum_avg_ytd_01,
rec_final_update.sum_avg_ytd_02);
END IF;
END LOOP;
-- EXCEPTION handling section
EXCEPTION
-- Fire OTHERS Exception case by default
WHEN OTHERS THEN
-- ROLL BACK Transaction, if any failure
ROLLBACK;
ln_errnum := SQLCODE;
ls_errmsg := SUBSTR(SQLERRM, 1, 100);
-- Log the ERRORS into APP_ERRORS table using SPU_LOG_ERRORS procedure
spu_log_errors(ln_errnum, ls_errmsg, ls_appid, ls_appmsg);
-- End of the stored procedure
END spu_final_profit_plan;
[\pre]I'm not sure what you mean by, 'How to check with table for cursor..?' but I'll offer a comment on your Code Snippet. I think you want to know how to check if a record exists so you know if you need to perform an INSERT or an UPDATE.
Here is a snippet of your code. I'll put my comments in "Comment" style in your code.
-- Insert / Update final profit plan for final_update query using cursor
FOR rec_final_update_el IN cur_final_update_el
LOOP
/* There is no need to test for %NOTFOUND since you are using Cursor FOR Loop!
** This construct automatically exits when the last record is processed. */
EXIT WHEN rec_final_update_el%NOTFOUND;
/* Is this where you would like to know how to Check if the record already exist??
** I asked this because, 'rec_final_update_el.' is not valid syntax. Are you looking for
** an Cursor Attribute or Method you can check here?
** I would suggest a Primary Key or Unique Index on ENT, CENTER, and POST_ACCT
** on the TEMP_FINAL_PLAN table. Then simply perform an INSERT and code an
** Exception to UPDATE when you get a DUP_VAL_ON_INDEX exception. Otherwise,
** you will need to simply run an Implicit or Explicit Cursor to test if the row exists and
** use this return value to determine if you should INSERT or UPDATE. */
IF rec_final_update_el. THEN
UPDATE temp_final_plan
SET sum_avg_mtd_01 = rec_final_update_el.sum_avg_mtd_01,
sum_avg_mtd_02 = rec_final_update_el.sum_avg_mtd_02,
sum_avg_ytd_01 = rec_final_update_el.sum_avg_ytd_01,
sum_avg_ytd_02 = rec_final_update_el.sum_avg_ytd_02,
WHERE ent = rec_final_update_el.ent
AND center = rec_final_update_el.center
AND post_acct = rec_final_update_el.post_acct;
ELSE
INSERT INTO temp_final_plan VALUES(rec_final_update_el.ent,
rec_final_update_el.center,
rec_final_update_el.post_acct,
rec_final_update_el.sum_avg_mtd_01,
rec_final_update_el.sum_avg_mtd_02,
rec_final_update_el.sum_avg_ytd_01,
rec_final_update_el.sum_avg_ytd_02);
END IF;
END LOOP;I hope I've answered your question, but if I haven't please provide more details so we can better understand your request.
Craig... -
How to check & unzip zip file using java
Dear friends
How to check & unzip zip file using java, I have some files which are pkzip or some other zip I want to find out the type of ZIp & then I want to unzip these files, pls guide me
thanksHow to check & unzip zip file using java, I have
ve some files which are pkzip or some other zip I
want to find out the type of ZIp & then I want to
unzip these files, pls guide meWhat do you mean "other zip"? Either they're zip archives or not, there are no different types. -
How to check does my notebook use integrated or AMD graphic card?
How to check does my notebook use integrated or AMD graphic card? Some games show me that they use integrated card: http://img849.imageshack.us/img849/4125/98ab1c28dc9f4b51b537435.png ?
This question was solved.
View Solution.Hello,
First click in Start Menu, Control Painel in the up right side click in Category and left in Small Icons.
Search Device Manager.
Display Adapters.
Which is your Operation System ?
Windows 7?
If yes.
Click with the right clickpad in the desktop and select Display.
Screen Resolution you can see how graphic your used or change if you want to.
Att Cristian
If this answer help you click in Kudos to tanks.
Tanks
If this answer help you click in Kudos to tanks.
If you don't have more question click in Accept as Solution to close this case.
Best Regards Cristian Derick.
Senior Support Analyst.
Maybe you are looking for
-
My friend bought on my advice a macbook pro. He has no internet connection at home. Getting started with the macbook pro, we can't skip the internet connection information box. This may seem a little strange in a www organised world, but he only want
-
ADOBE AIR INSTALLATION PROBLEM win7 x64
hi , i have a problem since i formated my computer to windows 7 x64 .. i can't install adobe AIR i have this error : windows cant find 'C:/users/PC/appdata/local/temp/AIREB40.tmp/adobe air installer.exe' verifiy that you intered the right name , and
-
Need help with configuring a Printer Driver in Oracle apps
Hi, We have set of interfaces/concurrent jobs which are programed to send the output file to file location1. Now we need to direct the output for all these jobs to file location2. The idea is to not modify the existing code, but have configuration in
-
Setting dynamic recipient for a publication is failing
I have a publication which has the dynamic recipient set up as a crystal report template. I am trying to change this dynamic recipient template using the below code. However, it does not work- string newPublicationQuery = @"SELECT * FROM CI_INFOOBJEC
-
Registering for Apple Care Problem
I tried to register for the applecare protection plan. when i got to the 2nd step, "Agreement & Shipping Information", there's a drop down box for "Select Agreement Type". but the drop down box was blank. so it wouldn't let me me continue and kept as