How to chnage the text in an emial
My workflow is sending emails via extended notification.
What do I need to change(I assume somewhere in swnconfig???) in order to change the text in the emails that it sends out?
Specifically I want to add a sentence along the lines of "This is a system generated message - please do not reply to this email" at the end.
Any suggestions?
Hello,
More links, but a bit more applicable to your problem (I hope) :
Where the standard texts are stored:
http://help.sap.com/saphelp_nw04/helpdata/en/26/0b0b404b2b1e07e10000000a1550b0/content.htm
An SDN thread about problems with changing the texts:
Re: Error while trying to save general setting using SWNADMIN
regards
Rick Bakker
Hanabi Technology
Similar Messages
-
How to print the text in points wise in sap script
hi friends,
how to print the text in points wise in sap script.
ex: if suppose paragraph consists of 15 lines. then according to one sentence or one fullstop (.) it should give point 1. like that...
1. hai how ru.
2. what r u doing.
3.where r u.
like this i want numbering.. waiting for ur replys.
thanks,
kirandeclare a counter
data : cnt type char 4.
print :
cnt = cnt + 1.
&cnt& &text&
cnt = cnt + 1. and so on.
or.
if the data is in an internal table
loop at internal_table.
cnt = cnt + 1.
write form.
in script -&cnt& &text&
endloop.
Edited by: NIKHILKUMAR POOJARI on Nov 17, 2008 11:18 AM -
How to print the text in only last but one page in sapscripts
hiiiiiiiiiii,
explian how to print the text in only last but one page in sapscripts? wher to write the code? plz if possible explain in detail with an example?Hello,
The total no pages is given by &SAPSCRIPT-FORMPAGES& command.
So u can handle the situation in ur form like this
/: if &PAGE& = &SAPSCRIPT-FORMPAGES&
p1 TEXT
/: endif
Try in this way it may help u.
Regards -
Did you know how to link the text in two or more text boxes?
Did anyone know how to link the text in two or more text boxes in Pages 5.0? Thanks for your answer.
Qualcuno sa come collegare il testo in due o più caselle di testo nella versione 5.0 di Pages. Grazie per le vostre risposte.It's just one of the many, many features that have been eliminated or changed. Leave feedback for the Pages team using the link in the Pages menu and review & rate the new versions in the Mac App Store.
If you previously had iWork '09, those apps are still in your Applications folder in a folder named iWork '09. You can continue to use them to get things done. -
I cannot figure out how to make the text larger in a received email. The finger method doesn't work and I can find no tool bar as I can for composing emails. I can find nothing in settings. Please help and thank you in advance.
Hi there,
Download a piece of software called TinkerTool - that might just solve your problem. I have used it myself to change the system fonts on my iMac. It is software and not an app.
Good wishes,
John. -
How to use the text module in script
hi,
i script how to use the text modules and how to write the code in layout of the script?Hi,
You canr use text modules in script. You have to use standard texts .
Standard text are maintained in SO10 transaction.
you can create translation text for other languages also . So based on logon language it will print translation text.
go to SO10
give textname it say Ztextname id as ST and language as EN
say create, then you will get editor there maintain your text and save it . then come back . Now change language (say for german DE) say create and eneter translation text and save it.
so now you have created a text called ztextname which you can use in your script.
Inorder to insert the texts in your script do as below
go to any window editor and select path
Insert->texts->symbols->standard symbols
then you will get popup in which you have to mention all the parameters that you have created earlier.
after inserting just change language EN to sy-langu
Reward points if useful
About text elements Sravan already given some informatiomn
Regards,
Nageswar -
How to clear the text in the Text Editor
Hi all,
I created a Text editor and also i am having language field in the screen.
whenever i change the language auomatically the text has to change when the text exists for that
language.
this is working fine, but when the Text exist , the text editor should be blank.
But it is carrying the Previous editor text itself into it .
How to clear the text in the Editor.
Regards,
MadhaviHello Madhavi
The simple report ZUS_SDN_TEXTEDIT_CONTROL shows how to switch the texteditor contents when changing the language.
*& Report ZUS_SDN_TEXTEDIT_CONTROL
*& Thread: how to clear the text in the Text Editor
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1145272"></a>
*& By default the itab GT_OUTTAB contains texts in DE and EN.
*& To switch the language directly enter into the command window:
*& LANGU=DE, LANGU=EN or LANGU=FR
REPORT zus_sdn_textedit_control.
TYPE-POOLS: abap.
TYPES: ty_t_text TYPE TABLE OF as4text
WITH DEFAULT KEY.
TYPES: BEGIN OF ty_s_outtab.
TYPES: language TYPE spras.
TYPES: text TYPE ty_t_text.
TYPES: END OF ty_s_outtab.
TYPES: ty_t_outtab TYPE STANDARD TABLE OF ty_s_outtab
WITH DEFAULT KEY.
DATA: gt_outtab TYPE ty_t_outtab,
gs_outtab TYPE ty_s_outtab.
DATA: gd_language TYPE spras.
DATA: go_docking TYPE REF TO cl_gui_docking_container,
go_textedit TYPE REF TO cl_gui_textedit.
DATA: gd_okcode TYPE ui_func,
gd_repid TYPE syst-repid.
START-OF-SELECTION.
PERFORM fill_texts.
gd_language = syst-langu.
PERFORM init_controls.
* Link the docking container to the target dynpro
gd_repid = syst-repid.
CALL METHOD go_docking->link
EXPORTING
repid = gd_repid
dynnr = '0100'
* CONTAINER =
EXCEPTIONS
OTHERS = 4.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM set_text_editor.
* NOTE: dynpro does not contain any elements
" ok-code => GD_OKCODE
CALL SCREEN '0100'.
* Flow logic of dynpro (does not contain any dynpro elements):
*PROCESS BEFORE OUTPUT.
* MODULE STATUS_0100.
*PROCESS AFTER INPUT.
* MODULE USER_COMMAND_0100.
END-OF-SELECTION.
*& Module STATUS_0100 OUTPUT
* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'. " contains push button "DETAIL"
* SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE user_command_0100 INPUT.
TRANSLATE gd_okcode TO UPPER CASE.
CASE gd_okcode.
WHEN 'BACK' OR
'EXIT' OR
'CANC'.
SET SCREEN 0. LEAVE SCREEN.
WHEN 'LANGU=DE' OR
'LANGU=EN' OR
'LANGU=FR'.
PERFORM get_text_editor.
SPLIT gd_okcode AT '=' INTO gd_okcode gd_language.
PERFORM set_text_editor.
WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form FILL_TEXTS
* text
* --> p1 text
* <-- p2 text
FORM fill_texts .
* define local data
DATA: ld_string TYPE string.
gs_outtab-language = 'EN'. REFRESH: gs_outtab-text.
ld_string = 'Good morning'.
APPEND ld_string TO gs_outtab-text.
APPEND gs_outtab TO gt_outtab.
gs_outtab-language = 'DE'. REFRESH: gs_outtab-text.
ld_string = 'Guten Morgen'.
APPEND ld_string TO gs_outtab-text.
APPEND gs_outtab TO gt_outtab.
gs_outtab-language = 'FR'. REFRESH: gs_outtab-text.
ld_string = space.
APPEND ld_string TO gs_outtab-text.
APPEND gs_outtab TO gt_outtab.
ENDFORM. " FILL_TEXTS
*& Form INIT_CONTROLS
* text
* --> p1 text
* <-- p2 text
FORM init_controls .
CREATE OBJECT go_docking
EXPORTING
parent = cl_gui_container=>screen0
* repid =
* dynnr =
* side = dock_at_left
* extension = 50
* style =
* lifetime = lifetime_default
* caption =
* metric = 0
ratio = 90
* no_autodef_progid_dynnr =
* name =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_textedit
EXPORTING
* max_number_chars =
* style = 0
* wordwrap_mode = wordwrap_at_windowborder
* wordwrap_position = -1
* wordwrap_to_linebreak_mode = false
* filedrop_mode = dropfile_event_off
parent = go_docking
* lifetime =
* name =
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
gui_type_not_supported = 5
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " INIT_CONTROLS
*& Form SET_TEXT_EDITOR
* text
* --> p1 text
* <-- p2 text
FORM set_text_editor .
BREAK-POINT.
CLEAR: gs_outtab.
READ TABLE gt_outtab INTO gs_outtab
WITH KEY language = gd_language.
CALL METHOD go_textedit->set_text_as_stream
EXPORTING
text = gs_outtab-text
EXCEPTIONS
error_dp = 1
error_dp_create = 2
OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " SET_TEXT_EDITOR
*& Form GET_TEXT_EDITOR
* text
* --> p1 text
* <-- p2 text
FORM get_text_editor .
CLEAR: gs_outtab.
CALL METHOD go_textedit->get_text_as_stream
EXPORTING
only_when_modified = cl_gui_textedit=>true
IMPORTING
text = gs_outtab-text
* is_modified =
EXCEPTIONS
error_dp = 1
error_cntl_call_method = 2
OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
MODIFY gt_outtab FROM gs_outtab
TRANSPORTING text
WHERE ( language = gd_language ).
ENDFORM. " GET_TEXT_EDITOR
Regards
Uwe -
HOW TO DISPLAY THE TEXT ON A PARTICULAR PAGE IN SAPSCRIPTS
HI,
HOW TO DISPLAY THE TEXT ON A PARTICULAR PAGE IN SAPSCRIPTS?in ur script main window
/: IF &TTXSY-PAGE& = 15.
ur text or standard text
/: ENDIF.
use this.
hope it helps if any issues revert back -
How to enlarge the text in the "email subject/header plane"
in Thunderbird email, the subject of the email and the email message are in to different planes. No problem enlarging the "message text, words" in the "body" of the email. How to enlarge the "text, font or words" of the "subject" in the subject/header plane? Don't want to open email if I'm not sure of it, and can't be sure of opening emails if I can't SEE the subject of the email. Surely I'm not the only one with this problem.
Thanks! Works great!
-
How to Insert the Text in Selected Text Frame-Reg.
Dear all,
I am using the SnipperRunner - SDK, and create the TextFrame, but I can't insert the Text in the Particular Frame. so please give me the soultions,
(*) Create TextFrame is ok,
(*) Select TextFrame is also ok,
(*) now, my Query ->
How to Insert the Text in the Selected Frame?. (or)
How to Link the Selectable Frame and my Text.? (or)
How come to know the TextFrame is select?.
Please any one can suggest me through the Coding....I will appreciate you...
Thanks & Regards,
T.R.Harihara SudhaNHi,
you have to get the TextModel associated with the textframe. Once you got that, ITextModel has an Insert()-method. You could also process kInsertTextCmdBoss - there are quite a few examples around. I believe WriteFishPrice also inserts text into a frame, just as an example. Good luck ...
Bernt -
How to wrap the text in column headers?
Hi Friends,
Can anyone please suggest how to wrap the text in column headers of a Java WebDynpro table?
I believe that caption is the only UI element that a column header can have and it does not allow wrapping of the text.
My original requirement is as follows,
In a table I need to dynamically set the width of the columns according to the width configured by the user in some other view. All the columns of the table are dynamically rendered.
Now what happens is when the user sets the width of the column to a rather low value, say 15 pixels, then the column is displayed like
Supplier Catalog Name
Sheila
Catalog
Name
Dropdown
As you can see it looks rather odd.
Supplier Catalog Name is the header of the column and I use IWDCaption for header.
Sheila Catalog Name Dropdown is the value of a particular row at the specified column. I am using a TextView as the TableCellEditor.
I think what is happening here is that the framework wraps the text in the TextView according to the width specified (15px) and then the column width is extended because it can not accommodate the text (Supplier Catalog Name ) of the column header.
We are using SAP NetWeaver Development Studio 7.0.12 as the IDE.
I searched some forums and many people have suggested using scrollable columns but I don't understand how it will help in wrapping the text in a column header.
Any help would be of great advantage.
Thanks
AmitHi Deepti,
Thanks a lot for the answer but the option that you have specified does not wrap the text. Instead it truncates the text being displayed and only the substring of the text which could be displayed in the given pixels is displayed.
I need to show the whole text wrapped (Meaning if the width of the column is not sufficient then the text goes into the next line).
Ayyapparaj,
Thanks to you too for an helpful answer. It seems that the Netweaver has finally come up with a way to wrap the text in the column headers but as Manoj pointed out, I do not see the property headerTextWrapping for a table column, Can you please specify which version of netweaver supports it?
We are using SAP NetWeaver Development Studio 7.0.12 as the IDE.
Thanks
Amit Kapoor -
How to print the texts retrived by using READ_TEXT fun module in Smartform
Please tell me how to print the text which is rertrived by using the READ_TEXT function module in smartform.
I have coded all things in the program lines and in that i am retriveing the long texts.
I am getting the text lines in my internal table clearly, the thing is that I am not able to pass these lines to the text.
I have to print the trouble ticket. in that the notes log I have to pass.
its urgent. Points will be rewarded for any type of clue. whether it will work or not.There are a few ways to do it. If you need to take all of the text in the text type, in your SF text element choose "Include Text".
Populate the fields with the data that corresponds to the text type. It is similar to the interface to the FM "Read_Text.
Text Name
Text Obje
Text ID
Language
Encase any variables with the "&" symbol.
If you have already coded the call to the FM "READ_TEXT" and loaded the text into an internal table, create a loop and loop through the itab. Inside of the loop create a text element and add a variable in the text element for the field you are looking to output. -
How to color the text elements in script?
how to color the text elements in script?
byeeeee
plz send the answersHi,
Please go through my blog to know how to do color printing in SAP scripts.
White Paper on 'Color Printing in SAP Scripts'
Regards,
Sireesha Ch -
How to encrypt the text in password field in Oracle Forms version 6i
Need help!
How to encrypt the text in password field in Oracle Forms version 6i?
one way is to change the settings in the property palette. Can somebody provide me some script to be run while the form is running which will enable the password to be encrypted?
Thanks!Hello,
Do you mean "hidden" (replaced with stars) or encrypted (that needs to be decrypted ?
Francois -
How to get the Text name to pass in the parameter header in save_text
Hi,
I am trying to change the long text of operation for historical order by using the flat file.I am using the save_text to do this.I would like to know how to get the text name in order to pass the parameter header in save_text.
I went to the tcode iw62 to get the header information of the long text.300100000009200000001
i would like to know what this 1000000092 indicates and where is this value updated in the table so that i can link it thru the order no to get the link and pass it in the text_name.
can anyone help me out?
krishnanHi,
Your query is.
I went to the tcode iw62 to get the header information of the long text.300100000009200000001
i would like to know what this 1000000092 indicates
In above number
300 - Client
1000000092 - AUFPL - Routing number of operations in the order (You can fetch this from table HIVG)
00000001 - APLZL - General counter for order ( You can fetch this from table HIVG).
BR,
Vijay
Maybe you are looking for
-
Report with Standard price / MAP price
Hi Is their are standard report where i can run the MAP / Stand price. No extraction from table please. Thanks N
-
So recently, a new graphic design that i hire out for freelance design work and myself were collaborating on some work for a client. When i got the .Ai file that she was working on, i get this prompt, everything was in clipping masks, all gradients w
-
Dead Power Inverter on MacBook
Hello everyone, this is my first post. I am 22, stationed in Osan, South Korea with the USAF. Anyway, before I left the states my MacBook display stopped workin, initially I thought it was because it suffered a short slow descent to the ground when i
-
How can i set a background of JTextPane ?
I want to set background of JTextPane or JTextComponent with an image. Help me with source or method to do . Thanks
-
How to know while a class doesnt compile
Hi, I'm loading some classes in to oracle but for some reason some of them wont compile and I dont know why, when I run 'ALTER JAVA CLASS SIMAC."com/ibm/mq/MQSESSIONClient$3" COMPILE' I just get this message: 'Warning: compiled but with compilation e