How to chnage videos correctly

What is the method to change the videos on the Iphone to send properly, as they are always sideways, thanks.

There is no such thing as calibration of a Lithium-Ion battery as there used to be with NiCad batteries. The only thing that can be calibrated is the charge reporting circuitry. Repeated discharge to shutdown is actually damaging to the battery, and independent studies show that discharge to 50% and then charge will result in three to four times the battery life vs full discharge. You are far better off following a frequent recharge procedure than discharging to shutdown as a regular thing.

Similar Messages

I still don't understand how to get video on my iPhone-HELP!

I have an iPhone and a iPod Classic and I just can't figure out how to get video on my either device, nothing I do works. I'm not talking about buying movies, etc from iTunes, I'm referring to videos I already have on my computer, converting them to the appropriate file extension (which I still have no idea what that is) and then where do I put these videos on my computer in order for iTunes to recognize them and pull them in?
I wish these devices were simplier to work with, where they acted as hard drives and you could just drag and drop what you wanted where and play them. But of course it has to be more complicated then this because Apple wants to control the users experience (sound familiar?)...I'm an advanced computer user and I have to admit that I'm embarrassed by the fact that I can't figure this out.
If anyone can give me SIMPLE instructions and a program to use to do video converstions I would appreciate it.
Thanks.

Im not going to be a great help as im on OS X, bit Ill have a go:
For a number of reasons, iTunes and the iPod/iPhone only support a handful of types of video file. Mainly a file type called .mp4 which is normally h.264 with embeded metadata. This isnt a special Apple video file, and as long as it doesnt have DRM, can be played on many modern devices such as the Xbox360, PSP, PS3 etc.
The only limiting thing you have to watch out for is the resolution of the video as some devices will not be able to play the higher resolution content such as a 1080p HDTV stream on an iPhone, it just wont play!
So what you need to do, if you have videos in many different file types such as realplayer, wmv, and avi etc, you need top convert them to mp4, and then optionally add cover art and tag the file with show name etc.
None of this is built in, partly because Apple wants you to buy content rather than get it elsewhere, and partly as itts a little more complicated than making an mp3 at the moment.
On my Mac I use a program called Handbrake (free) that can rip from DVD to an iphone version, and a program called VisualHub that can convert just about any video type to iphone format. After encoding the video, i use a program called MetaX to correctly tag the video fiels so that they are easy to find in iTunes and so that I can make smart playlists etc. Do this and the files in iTunes act just like if you had purchased them from the store.
Now, I dont know whats good for Windows, but I did a google search and found this which is free and for Windows:
http://www.videora.com/en-us/Converter/iPod/
For tagging, this may be ok:
http://tvtagger.wordpress.com/
Also, I just found this guide which goes into more detail if you want it:
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-managin g-itunes-videos/
Good luck!
<Edited by Moderator>

How to transfer video from macbook to ipad2

How to transfer video from macbook to ipad2

Haryati-
I found your question while researching another one on the same topic. I found it hard to believe that iPad videos could not be transfered to a computer!
I made a short video on my iPad 2. It showed up in the Photos camera roll.
Running iPhoto and connecting the iPad to my Mac Pro, I selected the iPad under DEVICES. The video was at the end of the photos, I selected it and clicked on "Import Selected". I then dragged the imported video to my desktop and it played in QuickTime Player when I double-clicked it.
Then I tried it with Aperture. The dragged copy appeared to play in QuickTime Player, but the screen was black. However an Exported Version played correctly.
Fred

How to install video Integration component

Dear Experts
Link how to install video Integration component
https://websmp106.sap-ag.de/~sapidb/011000358700000739542010E/index.htm
Regards
Carlos Farías

It says
To install this component, just drag the File "XviD_Codec 1.0 alpha.component" into Library/QuickTime. The Library directory can be found either at your home directory (to install just for the actual user) or at the top-level of your startup volume (this needs an administrator account). DO NOT PUT IN: /System/Library/QuickTime.
Sounds normal to me. The "~/Library/QuickTime" folder is the standard location for user and application installed QT components which are used globally by all account users. On the other hand, the "~/System/Library/QuickTime" folder is where QT components installed by the operating system installer are placed for global use. These instructions appear to be correct.
It is possible that the QuickTime directory does not yet exists. In that case you can create it yourself. Pay attention to capital letters if you use a case sensitive file system (i.e. UFS).
I do not have Library/Quicktime.
Highly unlikely if you are running Mac OS X V10.5.8 as indicated in your posting. As you can see here, when the startup drive is opened at the root level, you should find a minimum of four folders—the "Applications" folder, the "Library" folder, the "System" folder, and the "Users" folder. Without these folders, your computer would be little more than an electrified paperweight.
I do not have Library/Quicktime.
Either you are looking in the wrong place or someone has been playing around on your system (e.g., in the Console app) and made the folder invisible.

How to use video conference with life messenger, how to use video conference with life messenger

how to use video conference with life messenger, how to use video conference with msn life messenger

Hi,
Do you mean Window Live Messenger or it's Mac equivalent MSN for Mac ?
Actually the app comes with Office
In the Microsoft Office X (2001 version) it was still called MSN Messenger
In Office 2008 it was called Microsoft Messenger.
The current one that can also be downloaded as a standalone app also comes with Office 2011 is also called Microsoft Messenger.
This is version 8 and this version is the only one that can Video Chat as a standalone app.
Version 7 required you were in a mixed environment (with PCs) connected to the correct sort of Windows Server.
This page may help you further.
8:20 PM Saturday; June 11, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously.

How to change video resolution in Flash CS5

Hi, I've made a small app that captures and displays the camera feed. But the problem i'm having is that the app only displays a fraction of what the camera is showing (top left part of the corner), is there a way to shrink the resolution in Flash CS5 so that the app can show the full picture??
Many thanks.

I think I found the solution to my problem..... but dont know how to implement it correctly.
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/display/StageScal eMode.html#SHOW_ALL
I believe I need to use the SHOW_ALL constant, but there isn't an example of how to do it
Heres my code, it compiles without errors, but when I publish it as .exe I get the 'Error 1037: Package cannot be nested':
package
          import flash.display.StageScaleMode
          import flash.media.Camera;
          import flash.media.Video;
          public class ScaleMode
                    public static const SHOW_ALL:String = StageScaleMode.SHOW_ALL;
                    var camera:Camera = Camera.getCamera();
                    if (camera != null) {
                              videoTwo.attachCamera(camera);
                    } else {
                              trace("You need a camera.");
          stop();
Any ideas??

Need Help Viewing Videos Correctly

I added my movie/video correctly to itunes, converted it to the correct format and synced it correctly to my ipod. It appeared on my ipod but when i press play on the video it does not play. It appears like it is playing music. With the name and album art. The album art is the screen at the start of the video. Can anybody help plase?

I just started having this same problem. I press play to play a movie and it will say loading but the movie never loads and will even go back to the list of movies. All of my movies do this now. I am getting to the movies through videos then movies. How can this problem be fixed? Would resetting my Ipod fix it? I would like to solve this problem without resetting but am close to attempting resetting my Ipod. Please can anyone help with this problem?
hp pavilion d1000y Windows XP

How to import video frames as layers in Photoshop?

How to import video as layers in PhotoshopCS3. When I press "Import Video Frames To Layers", an error message pops up: Could not complete the Video Frames to Layers command because the QuickTime version 7.1 or later is required." I've already installed and updated QuickTime Player, but this message persists. I'm currently running QuickTime version 7.7.5. Thank you for your help.

Thank you R_Kelky for your reply.
I'm running Windows 8.1. I do see the QuickTimeGlue.dll file as you stated.
I have actually found a solution to my question. Since QuickTime 7.7.5 might be too new, I tried installing QuickTime 7.1 and the message went away. But now I run into a new problem: only .avi and a few .mov files can be uploaded correctly. When I try to upload other common video formats like .mp4, .m4v, etc, then the layers just come out as black, white, and sometimes green layers. The preview window where I drag the range length of video I want to import as layers is also blank as black, white, or sometimes green. You have any ideas what's causing this? At times, I cant even see the preview, I just get a new error message: "Could not complete the Video Frames to Layers command because the file name was not valid."
Thank you for your help.

How to add video in oracle froms ?

can any one suggest me how to add videos in oracle forms ..
and the video should also be played in output..
like the video played in you tube ..

If you are under form 10g you can use webutil functions.
Have a look here:
http://sheikyerbouti.developpez.com/webutil-docs/Webutil_store_edit_docs.htm
Hope it helps you,
Fabrizio
If this answer is helpful or correct, please mark it. Thanks.

How do you video chat when you can't attach an iSight?

Just curious. I was thinking of getting one a bit later and I do video chat a lot. How do you video chat when they don't produce the iSight anymore? Last I checked the displays don't have a built in iSight.

I use an iSight hanging upside down from one of the metal brackets that hold my shelf in place. I then use a program called iGlasses to rotate the image so the output is the correct side up. But if you can't get a hold of an iSight, there are plenty of other USB webcams out there that are compatible with Mac, and may or may not have solutions to attaching to monitors. I may have to buy one as my iSight no longer picks up sounds (dead microphone).
Message was edited by: marokero

IMac can't read usb card, says need correct codec, how do I get correct codec?

iMac can't read usb card, says need correct codec, how do I get correct codec?

What Mac OS are you running (from "About this Mac" in your Apple menu).
Codecs are usually required for viewing videos and should not affect whether the USB drive mounts. Can you tell us what kind of file your are trying to run from the USB drive? The pre-2006 iMacs this forum covers are no longer supported by most modern codecs
http://en.wikipedia.org/wiki/Codec

How to delete video from iTunes library? del and shift+del are not working - no any reaction

how to delete video from iTunes library? del and shift+del are not working - no any reaction.

seb963 wrote:
Hi
Currently, iMatch is turned off on my computer, as I do not want to upload any more songs. If I turn it on, will it upload all songs that are currently in my library? Is there another way that deleting them one by one?
You must enable iTunes Match on the new computer. The best way to accomplish what you want to do is to create a new, empty library by launching iTunes while holding down the Option key (Shift on Windows) and choosing "new library." Do not let iTunes scan for new content, but do enable iTunes Match on the empty library. Once the scan is finished you may delete tracks from the cloud. When you are done switch back to the main iTunes library.

How to delete video from iTunes library

Hello, I've only had my ipod for a few weeks now. I've finaly figured out how to rip dvds/encode them, etc. During this trial and error period I was putting all kinds of junk in my itunes library.
My question is how to remove videos from my itunes library.
..one more question.
I've been using a dvd ripper and video converter made by Xilisoft. After I import the movie from my pc to itunes video library and ipod, I've noticed that the audio doesn't match up with the video. Its like watching a poorly dubbed kung fu movie. Has anybody used Xilisoft software and had the same problems? If so, what did you do to recify the problem?
Thanks in advance for any help.
self-built Windows XP Pro

OK, I finally figured it out. I still don't have the clear option available. I had to double click on video, highlight, then press delete.
I'm curious why I don't have a clear option like I do in library.
Oh well, at least I can delete old files from my itunes now.
Thanks for the quick responses.

When I forward an e-mail from my iPad or iPhone, the pictures in the signature and sent as attachments. How can this be corrected?

When I forward an e-mail from my iPad or iPhone, the pictures in the signature are sent as attachments. How can this be corrected?

See [[Blank messages in Hotmail]]

How to put Video/DVD/games/eBook to Nokia

Nokia phone still the NO.1 of all the phones, As a fan to Nokia phone, I want to share with you some tips to play Nokia. Only some experience of play Nokia phone, just enjoy it.
This guide will show you how to put videos to Nokia, DVD to Nokia, games to Nokia and eBook to Nokia.
1 How to convert DVD/Video to Nokia
2 How to free download games to Nokia
3 How to put eBook to Nokia
1 How to convert Video/DVD to Nokia
After you download [url=http://www.daniusoft.com/dvd-to-nokia-suite.html]Daniusoft DVD to Nokia Suite[/url], you may find there are two options for you to choose for DVD to Nokia or Video to Nokia.
1 Run “DVD to Nokia Converter” to load Daniusoft DVD to Nokia Converter.
Insert your DVD disc into your DVD-Rom. Click “Load DVD” button to add the DVD file. You can also click “Load File” to add DVD/IFO from your hard disk.
[img]http://www.daniusoft.com/article-image/nokia/dvd-nokia.jpg[/img]
A regular DVD movie has several titles, by default, this software will merge all the DVD chapters into one video clips, you can check the click box before the title list to select any DVD clips you want to rip. Then just check the box “Merge into one file” to join file.
2 Open the drop download list to choose the Audio and Subtitle you like, you can also change the output files location.
3 Click on “Start” button to start the conversion.
Video to Nokia
Click “Video to Nokia Converter” to load the Daniusoft Video to Nokia Converter.
The convert video to Nokia is similar with the operation of convert DVD to Nokia
“Add” button to load video -> Choose output “format” -> “Start” Convert
This software supports batch conversion, so you can add several video clips at one time.
Tips:
Cut off the black edge of DVD- Click on “Effect” button. Move your mouse cursor to a box on the frame around the video to cut off black edge.
Control file size- You also click on the “Settings” button to customize the resolution, such as: video bit rate, encoder, frame rate, audio bit rate, channel, etc. This program also lets you create a profile and save it, then you can use different settings for each video clips.
With the “trim” function, you can trim any segment of videos to convert as you want:
Edit video effect – Click on “Effect” button. You can Adjust Brightness, Contract, Saturation of the video and the adjust the volume of music.
2 How to download games to Nokia (Free Nokia Java Games Installation guide)
Step 1 Download one of the Free Nokia Java Game files to your computer, and unzip the contents to a folder called 'Games' on your desktop.
Step 2. Download and install Nokia PC Suite
Step 3. Connect your Nokia to your computer with a cable or Bluetooth Dongle or infra-red cable
Step 4. Launch the Application Installer and continue. (Tutorial is based on the Nokia 7210)
Click the Install Application Icon Pictured
Here is a webpage which contains the games and themes list for Nokia, you may find many useful information here:
http://www.daniusoft.com//nokia-resource-list.html
How to transfer between Nokia and computer
Bluetooth - To send a game to your mobile via Bluetooth. You simply right click the desired theme on your desktop, select Send To/Bluetooth/Nokia 6600
A new message will arrive on your phone, open it and you will be able to install the new game. Once installed, delete the message and press the menu button and your game will have been added.
infra red connection cable - Firstly you will need an infra red connection cable. Download the SIS file to your computer. Enable infrared port in your phone. Select your sis file on PC, press right mouse button and select "Send to -> Infrared". The file will arrive as new message. Open Messaging application, then open the message. Installer will be started automatically.
[img]http://www.daniusoft.com/article-image/nokia/game-nokia.jpg[/img]
Then go to the folder where your files have been downloaded and unzipped into, and select a game folder. For this tutorial we are going to install Blackjack, because we have a gambling problem Double click the Blackjack folder.
Now you will see the all important Blackjack.jad file double click it to download it to your Nokia 7210
Wait until the installation process has finished (indicated below). Blackjack is now installed and you can gamble to your hearts content
3 How to read eBook on Nokia
1 Download and install the Ebook for Nokia to use as your eBook reader.
2 Download the Doc or TCR version of an eBook (perhaps Frankenstein).
3 Transfer the downloaded file to your phone in the standard way.
Recommended eBooks:
1 eReader http://www.ereader.com/product/detail/18841?refid=45377
Formats: eReader, Doc.
2 MicroReader http://home.c2i.net/thvoslef/midlets/mrinfo.html
For java-enabled Siemens mobile phones.
Formats: Doc, TCR, text. Freeware.
3 ReadM http://my-symbian.com/7650/applications/applications.php?faq=18&fldAuto=347
Formats: Doc, TCR, and gzipped text files. Freeware.
4 eBook for Nokia http://www.geocities.com/ebooknokia/
Formats: Doc, TCR, text, and HTML. Freeware.
5 iSilo http://www.isilo.com/
iSilo reads Doc eBooks in addition to its own iSilo format, and it's very easy to convert text, HTML, or DOC files into an iSilo document using free desktop tools.
Formats: Doc and iSilo.

Re: Ebooks
Your explanation for adding ebooks to the phone:
"3 How to read eBook on Nokia
1 Download and install the Ebook for Nokia to use as your eBook reader.
2 Download the Doc or TCR version of an eBook (perhaps Frankenstein).
3 Transfer the downloaded file to your phone in the standard way."
Well the only way I know how to put ANYTHING on there is ZOON and ZOON DOES NOT HAVE AN OPTION IN IT FOR EBOOKS THAT I CAN SEE.
How is "IN THE STANDARD WAY" supposed to be of any use or help to me whatsoever when STANDARD WAY FOR EBOOKS IS NOT EVIDENT TO ME???

How to chnage videos correctly

Similar Messages

Maybe you are looking for