How to choose between two subscriptions

I have Office 365 World Minutes AND a 60 minute subscription to landlines in Brazil. When I call a number in Brazil, from Dallas TX, where I am now, I want to choose that subscription and use those minutes instead of the world minutes. I only want to use the World Minutes when I call a landline number here here in the States or another country. Because now, I ran out of World Minutes, but I still have 60 minutes to Brazil, and still Skype doesn't let me call a Brazil number!

BIG DEAL getting a new status! What about the question I posted yesterday? I have a subscription with minutes I can't use because there's no way to choose which subscription minutes to consume while calling. I've been clicking all over this Skype Community looking for HELP, for an answer to what I posted yesterday, but nothing yet! What is this community for anyway? There are plenty of chats around, what I need is help, answers to a Skype issue! I'm paying for Skype service, I demand answers, I can't wait around for someone to see my posting and decide to help me!

Similar Messages

ADF BC: Choosing between two identical DB schemas on application startup

Hi,
We want to provide users with capability to choose between two identical db schema.
Anu idea how to do this ?

Cvele wrote:
Thanks a lot ! My pleasure.
One question: datasource name entered by the user (on the login form) is a JDBCDataSource property value for the Application module Configuration (which connect trough JDBC DataSource), correct ?Yes.
If so, then, we still must define two different sets of App Module Configurations, one for each DB schema, correct ?No. I'm not suggesting that you implement your UI like the demo that I forwarded. It might not be appropriate for your user to type in the datasource name, but the same code would be required to make the datasource name change work. Rather than getting the datasource name from the HTTPRequest and setting on the session where the custom sesison cookie impl and env info provider access you, for your solution that datasource value might come from some other place that the end-user doesn't directly type in.
Otherwise:
1. we cannot have two different datasource names, correct ?The example I forwarded should allow you to enter different JNDI names, so those would be different datasources.
2. in case of one Configuration – what is a way to define (at deployment time) username/password for each of those two schemas ? Is this correct ?The username/password information is encapsulated inside the Java EE container when you define the datasource. The application doesn't know that information and doesn't have to provide it when you are using a JDBC datasource by JNDI name.
On the other hand, what confuses me, is a fact that you say:
“You wouldn't use different configurations” And really, you example attached to me have just one App module Configuration (datasource name = jdbc/scottDS), which connect through dataSource.
Wondering what a user can enter as datasource name, except jdbc/scottDS ?I forget whether in my example I configured another datasource, but the user could enter the name of any available JNDI name for the datasource on the Java EE container.
Again, I don't suggest necessarily that you let the end-user type it in, that was just how I built the demo since I quickly evolved it from the other dynamic credentials demo that accepted the username and password from the end-user.

Can any one tell me how to talk between two controller.....

Hi,
Can any one tell me how to talk between two controller.....
Help will be awarded.
Regards,
Gurprit Bhatia

Hi Gurpit,
If you want to share data between 2 controllers then you can simply do that by providing a data link between the controllers in your data modeler.
If you want to use some methods of one controller in another then you can do it using
wdThis.wdget<controller name>().<method name>();
If your question is something different than this then please elaborate your requirement.
Regards,
Murtuza

How to switch between two query in Web templete.

Hi all,
Here i am facing problem to switch between two query in web template by using one 'table' web item. is there any way to use hyperlink 'SAP_BW_URL' and we can switch to query. here i am using these HTML code..
<table><tr><td class="SAPBEXBtnStdBorder" cellspacing="0" cellpadding="0" border="0"><tr><td>
<table><tr><td class="sapbexbtnstd" ><A href="<SAP_BW_URL cmd='reset_item' item='table_data' query_ID='ZSD_ZSD_M01_Q20' apply_cmd_on_target= "X">" >Switch to other query</A></td></tr></table>
but i am not getting correct functionality.
please help me to solve this problem.
I know the best way to say thanks in SDN.
thanks
Kiran Patel

Kiran,
Use the web api reset_data_provider as links or in select option in HTML.
   Onchange event of this select option should call JAVASCRIPT method and
   this in turn resets the current dataprovider to your concerned one.
   How to change graphs:
   The graph item has the default data provider:
   <object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="CHART_1"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_CHART"/>
         <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
         <param name="TMP_CHART_DATA_HANDLE" value="IIP_49MOXB0UVNOMM6JOZMZU7QO21"/>
         ITEM:            CHART_1
   </object>
So if you change the DATAPROVIDER_1 using RESET_DATA_PROVIDER to your concerned DP, this changes chart as well !!
   Please use this method and refer to sample code for Onchange Event on SELECT OPTION:
<HTML>
<HEAD>
<script>
function callDP() {
     if(document.forms[0].dp.value == "1") {
        //form your URL here..
       url = SAP_BW_URL_Get() + "&CMD=RESET_DATA_PROVIDER&DATA_PROVIDER_1=..&...";
        SAPBWOpenURL(url);
        //or docuemtn.location.href = url..
        //etc..
</script>
</HEAD>
<BODY>
<form>
<select name="dp" onChange="javascript:callDP();">
<option value="1">1</option>
<option value="2">2</option>
</select>
</form>
</BODY>
</HTML>
HOPE THIS HELPS !!!

How to compare between two versions of template project???

Dear All,
We are doing some cleanup activity in our solution manager system. For this actually we have created the replica of this project from production system to a sandbox system. We can do the cleanup of this project and can transport this new project to our production system and can move on.
But the pbm we are facing now is, how do we bring in the data captured or added to the production system after we have copied it to the sandbox system?
Can anybody throw in some light into this issue?
We tried the option of creating different version for the template and using the sa_project_upgrade transaction to compare between two versions of the template using "Current Version in Project" option. Not sure whether this will work out.
{{We thought that if we try in this way, we can find the difference between the two versions of the template project, and from there, might be we can bring in the new changes into our new project manually. We do agree that this is not the right approach.}}
But the end result we got was like we got the information regarding where all there is the difference between the current version in the template project to that of the original(in our case it checked against BPR as we selected the scenarios from BPR for this template). But what we expected was a difference between two versions of the template.
Pls help. Pls make a try to help. Any thoughts in this direction will help us to move forward.
Any info will be suitably rewarded.
best regards,
Krishna.

Hi Andreas,
Thanks a lot for your immediate reply.
I too had that doubt that my appraoch will not work. But wanted to get confirmation that it will not work. Also wanted to know about any other approach. Thank you for providing me with some alternative approach.
I tried the option suggested by you. But while running the comparison report for the newly copied project with the option "New Version of Original", I am getting the below error. I do agree that this approach should work. But for some reason I am getting the below error. Can you pls look into the same and help me out.
Internal error
Message no. AI_COMPARE006
Diagnosis
An unexpected error has occurred in:
           program CL_SA_PROJECT_UPGRADE_ONLINE==CP
           include CL_SA_PROJECT_UPGRADE_ONLINE==CM002
           line                                                  102
Procedure
Restart the transaction. If the problem persists, check if a SAP note is existing for this problem. If not please send a message to the SAP hotline.
Thanks a lot in advance.
best regards,
Krishna.

How change information between two Web Applications?

Hi,
Has anyone any code sample or article how to build
a "bridge" that would change data stored into session and servletcontext
between two separete web application in same servlet engine?
What I have understood is that they can not normally share same
session or servletcontext data...
Thanks,

Hmm...
Text in this Sun's tutorial says:
"This lesson, however, shows you what to do if your servlet requires a resource available from its own server"
The actual problem is following:
- In Web Application 1 servlets/jsps stores data into session object and servletcontext
- then user can request a page in Web Application 1 which should "activate/launch" Web Appilication 2 and
pass some session objects or objects stored into servletcontext from Web Application 1 to Web Application 2.
How to do this, it's the problem.

How exchange messages between two user-bean instances?

Hi,
I would like to let several user to log-in my web site (I'm using tomcat) and then let them exchange some messages until they are logged-in. Is there a way using JSF?
I was thinking about implementing a list of messages inside each user-bean. The user should know that other users are logged-in, that could be listed in a table, and click on its name. I would like that the click action create an item in the list valiable of the selected user. Is that possible using JSF? I didn't find any of such kind of communication between two user-bean instances.
Do you have any hints? Is that the right way or is there other possibilities?
Thanks

You could get hold of a map of sessions in the application scope. Make use of HttpSessionListener to add/remove sessions to/from the map.
JSF is just another component based MVC framework on top of JSP/Servlet. Everything which you can do in JSP/Servlet is just still possible. You only need to understand how JSF works under the hood.

How to choose between different audio output in different programs

I want to choose between the audio outputs in different programs.
For example; I want to hear spotify/iTunes with my plugged-in speakers and skype with the build-in/intern speakers.
It is possiple to control this on Windows but can I do it on Mac?
Does anyone know an app for this problem?
Thanks for help!

I'd assume you'd want to set the sequence to "slur" notes and then just calculate the notes between a top & bottom value based on a float and generate NOTE_ON messages appropriately.
The pitch bend is designed to emulate / support the bend wheel found on sound keyboards...and it just modifies the pitch associated with a given note. A pitch bend of +2 would turn an A into B, etc...
So, you'd want to do...
SET_SLUR (however you do that, I'm not a MIDI expert)
pitch = bottom_pitch + ((top_pitch-bottom_pitch) * sliderValue);
NOTE_ON(pitch)

Can I set FIREFOX to choose between two different homepages or websites?

I know that Firefox will open any number of web sites when you start it. I want to have the ability to choose between opening a preset number of sites and just one. For instance at the beginning of the day I want all my banking sites available when I start. Later in the day I want to open only say, Google. Is there any way to have Firefox do that?

Morning Coffee: https://addons.mozilla.org/firefox/addon/2677

How to Differntiate between two instances of the same class ????

I don't even know if my question makes sense or not ??
I don't have any code written for it yet.. but its the most critical task for me..
Q ??
say i have multiple objects running of the same class on the same box.
sth like a CPU can have multiple ports. The port class is intantiated
to create every new port for CPU as required.
Now i have to differntiate multiple ports on that box and give
accordingly its statistics back to CPU. sth like how many acces to
ports, how much bandwidth available, how many bits.. i know how to
calculate statistics of ports but i don't know how to differentiate
between multiple ports ??
Eg: Number of sessions created on oneport is 14 and other is 25. Then i
have to give differnt statistics of these 2 ports back to CPU.
I hope all this made some sense ???
Thank youuuuu....reply back if u need some more details....
Edited by: javanewbie83 on Jun 16, 2008 4:28 PM

javanewbie83 wrote:
I don't even know if my question makes sense or not ??
I don't have any code written for it yet.. but its the most critical task for me..
Q ??
say i have multiple objects running of the same class on the same box.
For an example: (its just a correlation to my project.. its actually not CPU and port numbers.. sorry if u misunderstand...)
sth like a CPU can have multiple ports. The port class is intantiated
to create every new port for CPU as required.
Now i have to differntiate multiple ports on that box and give
accordingly its statistics back to CPU. sth like how many acces to
ports, how much bandwidth available, how many bits.. i know how to
calculate statistics of ports but i don't know how to differentiate
between multiple ports ??
Eg: Number of sessions created on oneport is 14 and other is 25. Then i
have to give differnt statistics of these 2 ports back to CPU.
I hope all this made some sense ???
Thank youuuuu....reply back if u need some more details....Simply repeating your unclear original post does not magically make it clear.

How to choose between CBR and 2-Pass VBR ?

Hi,
I know alot of virtual ink has flowed about this topic, but I couldnt find the answer I need.
I'm compressing an 83minute feature film to DVD. Source material is 10bit Uncompressed YUV from PAL DigiBeta, sent directly from FCP to Compressor. Compressor is at version 2.0.1, and all ProApp and QT updates are applied.
Compressing at a CBR (ie: 1pass) with a data rate of 7.4Mbps gives a .m2v file size of about 3.3GB and takes about 3hours.
Compressing at 2-Pass VBR with a max data rate of 7.4Mbps gives a file size of about 3.9GB and takes 12 hours+.
Shouldnt the two pass be smaller given the same max data rate?
When I compare the two visually, I cannot tell any difference between them. I'm looking at areas with alot of motion, or with fine detail, or camera movement, but they look about the same.
How to decide which to use?
Many thanks....
G5 Dual2.0 (PCI-X), 4.5GB RAM, 23" Cinema Display, PB G4 Mac OS X (10.4.6)

Hi There
CBR compression is generally better quality - especially out of Compressor 2 - but usually a higher file size that VBR - can't explain your result there. Check fades, dissolves, small text and camera movement for comparsion between the two mpegs. If you still can't tell the difference then use the bigger one if you have the room, if you don't use the smaller one. If the larger file is better but you're worried about disc space then build your disc using the lager one anyway. If after your created the VIDEO_TS file it still too big use DVD2ONE or DVD Remaster to shrink it back down - I doubt you'd see any visiual difference.
Hope that helps
Cheers
B

How share directory between two Linux nodes?

Dears,,
I am trying to install Oracle RAC on two Linux nodes . . .
But i need to make directory shared between the both nodes
directory is /ocfs/clusterware
I need to make this directory shared between them
I mean , if create file in this directory in the first node , I must see it from the second node.
As example:
On first node:
[root@rac1 clusterware]# touch test
On second node:
[root@rac2 clusterware]# ll
Should find test file
How can i make this please?
Edited by: M o h a m m e d on Apr 29, 2010 3:44 AM
Edited by: M o h a m m e d on Apr 29, 2010 3:44 AM

Dear,,
I already followed steps located in the following link . . .
[http://www.docstoc.com/docs/4603014/Install-Oracle-RAC-10g-on-Oracle-Enterprise-Linux-Using-VMware-Server/]
and i created the following in my lap top drive J:\
J:\RAC Virtual Machine\RAC\RAC 1
J:\RAC Virtual Machine\RAC\RAC 2
and J:\RAC Virtual Machine\RAC\Shared Storage
that contain the following:
asmdisk1.vmdk , asmdisk1-flat.vmdk , asmdisk2.vmdk , asmdisk2-flat.vmdk ,
asmdisk3.vmdk , asmdisk3-flat.vmdk , ocfs2disk.vmdk , ocfs2disk-flat.vmdk
I executed the following command in RAC 1
*[root@rac1 ~]#mount -t ocfs2 -o datavolume,nointr /dev/sdb1 /ocfs*
Succeded
But in RAC 2
*[root@rac2 ~]#mount -t ocfs2 -o datavolume,nointr /dev/sdb1 /ocfs*
ocfs2_hb_ctl: OCFS2 directory corrupted while reading uuid
mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not per mitted"
How solve this please ?

How to distinguish between two publish services

Hi,
I have two instances on a published service plugin, but how can I distinguish between them. Currently, I'm accessing the publish service via
activeCatalog:getPublishServices( _PLUGIN.id ) which returns just an array. So far so good. But when I change some settings in the Publishing Manager for "instance-A" everything in "instance-B" is changed to the same values as well.
What I'm doing wrong? Please help!
Thanks,
Lars

It is definitely possible to maintain separate sets of settings for two or more
publish connections of the same publish plug-in.
Without more detail on what exactly your code looks like, it is difficult to say what's not working right.
The contents of 'exportPresetFields' should be maintained on a per-connection basis.

BMM Logic to choose between two logical sources

Hi All - I am new to OBIEE and hope you can help me out with this problem.
I have a dim table (dimA) and an alias of dimA (dimB). Both of these tables are snowflakes off of two seperate "lookup" tables that join to the fact. I want to use dimA versus dimB based on logic, such as if the key to lookuptable1 does not exist, then use lookuptable2. I want to combine both tables into the same BMM logical table and presentation table. Is there way to build this in the BMM ( to choose dimA versus dimB)??
Any ideas is much appreciated!! Thank you!

What is lookup table here? is it lookup in 11g?
~ http://cool-bi.com

Looking for simple instructions on how ARD works between two wireless units

My Admin computer for ARD is on a wireless network at home. I need to control another computer of mine at the office which is also on a separate and wireless network. Two computers, both connecting to the Internet from behind wireless routers feeding off of cable modems. How do I do it? I need someone to explain to me, in simple terms how I establish the connections...what settings I need to make in ARD on the administrative computer, and what needs to be done (if anything) on the remote unit I'm trying to access and control. Thanks

Please search the discussions before posting. The topic of connecting to ARD over the internet has been asked and answered many many times.
This page may help but you might have to refer to your router's documentation for specifics on opening and forward ports in that particular unit.
http://www.starkpr.com/ard.htm

How to choose between two subscriptions

Similar Messages

Maybe you are looking for