How to choose connector and cable of NI PCI-7342

I want to buy NI PCI-7342 motion controller card of NI but i don't know How to choose connector and cable of NI PCI-7342. My objective is just control the servo motor. What 're connector and cable I need to buy together ?

Hi bkk -
The choice of accessory equipment will depend on the drive and feedback method you plan to use. If you would like to use an NI servomotor drive (the MID-7652 would be appropriate for your controller), the cable that will connect your controller and drive is the SHC68-C68-S. If you plan to use a third-party motor drive, you'll need a breakout unit to make the appropriate connections with your controller. The UMI-7772 is our two-axis breakout unit, and the same cable will connect to it.
David Staab, CLA
Staff Systems Engineer
National Instruments

Similar Messages

How to choose addons and plugins to be active always

I want the choice to turn all plugins on and off in Aurora/Firefox because if i can't do that i can't use Aurora/Firefox anymore.
If my plugins are turned off by default my Webplayers stops working all the time and Adobe Flashplayer won't work before I turn a few of my plugins on.
I wan't Aurora/Firefox to aks me if I want to turn any plugins/addons off.
I know all about the security risk the plugins have u don't care I can't use Aurora/Firefox if i don't have a choice to make about this.
I wan't my plugins/addons to run always but there might also be other people that wan't them turned off so i don't see any problems in giving the user a choice to make when they open their browser.

I wan't Aurora/Firefox to aks me if I want to turn any plugins/addons off. I know all about the security risk the plugins have I don't care I can't use Aurora/Firefox if i don't have a choice to make about this.
[Ups I spelled a few words wrong sorry]

How do I scan and detect the NI PCI devices present in the system like 4060 DMM and PCI 6511 etc?

Hi there,
I would like to scan the devices present in the system every time when the software starts.
This will help me to prompt user if a particular device is not present or is bearing a different device number than the one used in the software.
For this system I'm using PCI4060, PCI 6511 and DIO96. I am using LV7.0 and Win 2K & XP.
Thanks in advance for your help.
_Deepu

Hi,
you can make a scan of all the Daq devices by using the function: Get DAQ Device Information.vi that you find under the: Traditional Daq - calibration configuration palette.
See BD image attached. It scans for 16 devices and return a list of the found.
This seems to work only for Traditional Daq-compatible devices, no problem for PCI 6511 and DIO96.
I don't know if it works for the multimeter also; if not, you can make a basic call to the device at the beginning of the program and check for errors.
Alberto
Attachments:
devices.jpg ‏8 KB

How can I connect the output of a force transducer unit(BNC cable) to the PCI-6036E DAQ card via the SCB-68 block connector?

I m using the 404A force transducer unit by Aurora Scientific and i want to connect the (converted to Volt) output, which is a BNC cable, to the PCI-6036E DAQ card via the SCB-68 connector block, facing difficulties in choosing the correct input mode for my signal(couldn t clear this using the manual), setting the switches and which channel shall i use in the block connector in order to configure ot with LABVIEW

Hi MSc Student,
Connecting your transducer to the 6036E card via the SCB-68 connector block should be pretty straight forward. You have 2 choices of input mode, Referenced Single Ended (RSE) this is where you will connect the screen of the BNC cable to a ground connection for the DAQ card in the SCB-68 and the other to any analogue input channel . These are listed in the device pinouts in the help section of MAX, under the 68 pin devices section. The terminal block numbers correspond to the DAQ card's pin numbers. Another method, which avoids ground loop problems would be to use the Differential connection and connect the signal and ground connections of the BNC cable to a differential analogue input, these are listed in the 6036E manual and in th
e MAX help section again. the disadvantage to using this method is 2 analogue input channels are used and you must use the lowest 8 analogue input channels for differential inputs.
The switch settings that you need can be found in the manual for the SCB-68 in table 2-1, the manual can be found here : http://www.ni.com/pdf/manuals/320745b.pdf
The switches are for power to extra signal conditioning and the cold junction compensation for thermocouples which in your case you do not need so set the switches to the positions in the first box ie Direct feedthrough, with temperature sensor disabled and accessory power disabled. The channel you use should not matter the only ting to remember will be that if you use differential mode measurement that you will be connecting the signals to AI(n) and AI(n+8) so differential input 0 is across the connectors for AI0 and AI(8). The channel numbers corespond to the analogue input number for the card.
I hope this information helps,
Chris M
App
lications Engineer, National Instruments

I bought the iPad and got it home and when I turned it on, all I see is the iTunes logo w/ a usb connector and arrow. How do I clear that and go to the home screen??? HELP!

i bought the iPad and got it home and when I turned it on, all I see is the iTunes logo w/ a usb connector and arrow. How do I clear that and go to the home screen??? HELP!

You need to Set Up the iPad... Connect it to iTunes...
See here for Getting Started...
http://www.apple.com/support/ipad/
and here...
iPad User Guide iOS 5
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf

How do I scan and email documents on my canon mx870? I have a MAC OS X 10.7.5 and it is connected with a usb cable to the printer. Thank you so much!

How do I scan and email documents on my canon mx870? I have a MAC OS X 10.7.5 and it is connected with a usb cable to the printer. Thank you so much!

Hi, I have 10.6.8 and an HP printer so it may be slightly different but I'll give it my best shot:
Go to System Preferences.
Click on "Print & Fax"
Near the top of that page you should see "Print" and "Scan" options. Click "Scan"
A button appears that says "open scanner"
The settings are different between the different scanner models so I'm not sure what the next window will look like, but it should be pretty straightforward from there. It will scan to a JPEG image which you can attach to an email. I hope that helps! Let me know if there's anything ense I can help with.

A phantom folder with the name of a folder that held photos has appeared in my finders places list. I can't choose it to delete it. it won't move. It can't be found in a search. How can I choose it and delete it?

a phantom folder with the name of a folder that held photos has appeared in my finders>places list. I can't choose it to delete it. it won't move. It can't be found in a search. How can I choose it and delete it?

Can you drag it off holding down the CMD key?
Do a search for it with EasyFind (try different settings in "Operator")
http://www.devontechnologies.com/products/freeware/

HT4644 How do I get an image on a Samsung TV via HDMI adapter and cable. Currently get only a static imgae of desktop and gray grainy screen for everything else.

How do get an image on a Samsung HD TV via HDMI adapter and cable?
Currently get a static image of the desktop and then a grainy gray picture.

If it's like mine, I used another post's advice. Go to system preferences, then display and click on "mirror". Then in system preferences go to sound and click on "HDMI". I did this while I was connected to my Samsung TV and it worked then.

How to get Connector information and WebAS Info for System

HI,
How can we get the info for the Connector and WebAs to create the system?
Thanks,

Hi
Check the following threads for input
1.[Using SAP Java Connector to Generate ABAP Documentation|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/47b6cd90-0201-0010-5aba-b6b7474d4aff]
2.[Overview of SAP Application Servers|http://help.sap.com/saphelp_nw04s/helpdata/en/69/c24e034ba111d189750000e8322d00/frameset.htm]
3.[Business Connector|Re: Business Connector end of life;
4.[SAP Business Connector on Windows XP|Re: SAP Business Connector on Windows XP;
Best Regards
Satish Kumar

HT4108 I have a hdmi connector and can not get a picture to come on my tv. Need help also bought the RCA cables and can not get it to work with my iPhone 4 g

I have a hdmi dock connector and can not get it to show on my tv. It's a iPhone 4g please help also have a RCA cable to and can not get it to work either

With what apps? Not all apps require video output.

HT1212 i changed my ipad password and have forgotten what I changed it to. How do I unlock ? I have access to a computer and cable to connect computer to ipad.

i changed my ipad password and have forgotten what I changed it to. How do I unlock ? I have access to a computer and cable to connect computer to ipad.

Forgotten passcode
http://support.apple.com/kb/HT1212

My 3GS keeps switching between iPhone speaker and Dock connector and I don't know how to keep it on iPhone speaker

My 3GS keeps switching between iPhone speaker and Dock connector and I don't know how to keep it on iPhone speaker so I can listen to my music and games. Is it hardware or software problem?

I was told by a friend that sometimes when you use a 3rd party charger that the connectors are not the same size and so it can affect the sensors in the phone and make it seem like it is in a docking station and so changes the output for dock speakers. With that said, I didn't take my pohone in to be serviced at the appple store because it was a 3GS and over 2 years old and so not covered by any service plan. Since then my phone is back to normal and I can use my headphones and listen with the speakers on the phone. I stoped using the suspected cheap 3rd party charger and maybe that's what did it, but not sure if it was or wasn't the cause of my problem. I'm glad that my phone is better I was kinda holding out for the Iphone 5 when i comes out later and hope my phone lasted until then.

How to choose RT hardware and software

I am new to labview to do real time measurement and control. Can anybody give me some advice on how to choose the software and hardware?
I need to design a real time control system for metal process forming application. The inputs are voltages of about 10 channels, the outputs are voltage of 15 channels. I also need capture the images from CCDs. The system should be able to take measure and control in the order of 1ms. Can anybody suggest me what to choose?
Thanks

You might consider CompactRIO. It is an industrial grade RT target with high speed I/O. It also can execute PID at very fast rates when the PID executes in the FPGA backplane.
See www.ni.com/compactrio for more information.
Preston Johnson
Principal Sales Engineer
Condition Monitoring Systems
Vibration Analyst III - www.vibinst.org, www.mobiusinstitute.com
National Instruments
[email protected]
www.ni.com/mcm
www.ni.com/soundandvibration
www.ni.com/biganalogdata
512-683-5444

HT3180 My Apple TV is coming up with the picture of the Apple TV and cable linking to iTunes sign. How do I get past this?

My Apple TV is coming up with the picture of the Apple TV and cable linking to iTunes sign. How do I get past this?

http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US
It or an update has gone wrong - you need to restore via iTunes as detailed above.

How can I pick and choose what IMAP folders are show in Mail?...

I am using IMAP and it works fine. Except "Sent" messages are saving on the server to "Send Messages" however I cannot see it on the list of IMAP folders in Mail. I see other folders, Save, etc. ones I created, just can't make the folder on the server show up in Mail.
If I go into the "Account Info" window in Mail, it does not show it either. Even though it is on the server and Mail is saving sent messages to it as it should.
Any ideas? How can I pick and choose what IMAP folders are show in Mail?
Thanks
Frank

Yes it is using the sent mailbox but just does not show it. MS Mail on Vista has a "show/hide" IMAP folder screen, I wish Mac Mail has this..would be perfect.
I was thinking about deleting the account, and adding it, that would reset it I am sure. However I have my mail set to keep a copy locally for off-line viewing (option in preferences under Account) and I get the sense that if I delete the IMAP account and add it, it will download a copy of each piece of mail (for example my inbox) again and I will have two of everything. Does this make sense? Do you think this will happen?
Frank

How to choose connector and cable of NI PCI-7342

Similar Messages

Maybe you are looking for