How to choose correct domain from 2 domains

Hi All,
There are 3 domains (bmp, eai and wli) in 2.1. Can any one point me to the documentation
that throws light to how to choose a correct domain for your needs?
Thanks,
Parag

Parag,
Here is some light:
bpmdomain is configured with BPM only.
eaidomain is configured with AI and BPM. This includes the AI and DI BPM plug-in.
wlidomain is configured with AI, B2Bi, and BPM. This includes the AI, DI and B2Bi BPM
plug-in.
samples is configured like wlidomain but has sample data associated with it.
You can always read the config.xml for each domain and see what applications get deployed
when the domain server gets started.
Hope this helps.
Chris
Parag Gandhe wrote:
Hi All,
There are 3 domains (bmp, eai and wli) in 2.1. Can any one point me to the documentation
that throws light to how to choose a correct domain for your needs?
Thanks,
Parag

Similar Messages

How to replace DHCP server from domainA with DHCP from domainB?

Hello fellow Administrators,
We have one remote site with one subnet. There's domainA domain controller and about 100 domainA's client computers in that subnet. We're about to send 100 domainB's client computers there as well.
There's also domainA's DHCP server running on the same subnet. DHCP scope options include domainA's domain name, gw and domainA's DNS server addresses.
DomainA and DomainB belongs to separate forests and there's two-way trust between them. DomainA DNS has stubzone for DomainB and DomainB has stubzone for domainA. That's how
clients can resolve hostnames of other domain.
All domainA's clients in remote site will be replaced gradually with domainB's client computers, but this can take a long time.
I want to note, that I cannot create second subnet for domainB at the moment.
At some point, we need to deploy DHCP server to domainB's member server in the remote site. What are the steps I should take to replace existing domainA's DHCP server with domainB's DHCP server while still allowing clients from domainA and domainB to successfully
find domain controller of their own domain and being able to resolve hostnames from both domains?

When the devices on your network first request an IP address or reach the end of their leases (or you force them to check their lease is still valid) they will simply
broadcast a request for a DHCP server, and will accept an offer from the first DHCP server
to reply.
Multiple DHCP servers PT 1: Spanning multiple subnets.
If you have several VLANs or physical network segments that are separated into different subnets, and you want to provide a DHCP service to devices in all those subnets then there are two ways of doing this.
If the router / layer 3 switch separating them can act as a BOOTP/DHCP relay agent, then you can continue to keep all your DHCP server(s) in one or two central parts of your network and configure your DHCP server(s) to support multiple ranges of addresses.
In order to support this, your router or layer 3 switch must support the BOOTP relay agent specification covered in section
4 of RFC 1542.
If your router does not support RFC 1542 BOOTP relay agents, or if some of your network segments are geographically dispersed over slow links, then you will need to place one or more DHCP server in each subnet. This ‘local’ DHCP server will only serve its own
local segment’s requirements, and there is no interaction between it and other DHCP servers. If this is what you want then you can simply configure each DHCP server as a standalone server, with the details of the address pool for its own subnet, and not worry
about any other DHCP servers on other parts of the network. This is the most basic example of having more than one DHCP server on the same network.
http://www.arabitpro.com

How to choose correct version of editing app when choosing to edit image from within InDesign?

Hi all,
Normally when I wish to edit an image that is in a layout in InDesign I either press option-click on the image or I ctrl-click on the image and choose to edit it using Photoshop CC, Illustrator CC or whatever app I need to use at any specific time. Well, I also have backups going that backup my entire system and so all of my applications get backed up as well.
Well, what is happening now (since today) is that when I choose to edit the image, it is opening Photoshop (or Illustrator, etc.) from my BACK-UP drive and not within the app on my main drive. So, even tho' I already have Photoshop open as I am working in InDesign, when I try to edit an image it will open up the BACKUP copy of Photoshop AS well I have tried to choose "other" when ctrl-clicking on the image and choosing to edit...but when I navigate over to where Photoshop is on my main drive, I cannot choose the main app because it seems to show the main Photoshop app as a folder with the package contents therein.
How on earth can I correct the path to the correct version of Photoshop where I need to do the editing?? I now have to go about things a roundabout way by navigating to where the image is in the finder (via ctrl-clicking on the image link in the LINKS panel and choosing "show in finder") but this is taking twice as long:(( It wouldn't be so bad if I didn't have as many images I need to work with that I currently do.
Any help or advice will be much appreciated:))
Thank you kindly,
Christine

Just guessing...
Does the problem exist if Photoshop CC on the main drive is open? If not, consider setting it to open when the computer starts up. The active instance might take precedence over the inactive one.
Usually, the last-installed instance of an application is the one that operating systems (OS X & Windows) associate with a document file that calls for the application, for example, when double clicking in Finder/Explorer. It's common to see the newest release invoked (say Photoshop CC rather than Photoshop CS 6) because the newest release is usually the last one installed. Because Adobe CS applications usually install new versions of common files, it's recommended to install releases in chronological order if it's necessary to reinstall applications when there are multiple instances on the same computer. For example, install Photoshop CS4, then CS5, then CS6; if an earlier release is installed when a newer is present, the earlier common file(s) may cause problems for the application. A consequence of this is the normal, but sometimes annoying, behavior that when launching an application by launching one of its files, the newest release is opened because that's how the operating system works.
In your case, it's possible that the operating system sees the backup drive's Photoshop installation as the newest installation, and launches it. Perhaps backing up Photoshop CC makes that instance appear newer to the OS. Consider leaving Photoshop CC out of the backup operation. If that works, fine! If not, you might try starting the computer from the backup drive, running Photoshop, then quitting and restarting the computer from the main drive. If that doesn't fix the problem, perhaps try starting from the backup drive again, then reinstalling Photoshop on it, then restarting from the main drive. If this works, it may "hold," or some operation like backing up, might negate all your smart tricks.
Perhaps one of these strategies may be a permanent fix.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

How to access sharepoint site from domain B users .

SharePoint 2010 is installed in one domain A. another domain created in another country and both domains are trusted.
and domain B users are added in sharepoint site. But when users of another domain try to access sharepoint site they are not able to access.

When you say they cant access, what is the issue? 404 error etc. or SharePoint access denied?
Thanks
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

How to choose correct default apps...

Hi everyone. Simple question...how does one choose the correct default application for say, a short video file that's been emailed to you? None of the highlighted apps seem appropriate, and I don't want to make the mistake of putting default settings in wrong apps. Any help for this? Thanks.

A video file can't be played on a lot of software so your selection of possibilities should be pretty limited. QuickTime seems the most likely.
If you pick the wrong app and it won't open then just click once on the file to highlight it and do "command i" for Get Info (the command key is the one with the Apple logo on it). About two thirds down the info window you'll see something that says "Open this with..." and below that a popup menu of applications to choose from with the current one visible. Click on the popup window and choose another one. You can do this as many times as you want so don't worry about picking the right one the first time.

How to choose a picture from photo library on iPhone ?

Hi guys,
I am trying to upload a picture in "Photos"(I mean phone photos library) from the app. Actually I don't know how to code it.
Can you suggest me for this issue ?
Thanks in advance.

Hi Raiden -
RaidenMAC wrote:
I am trying to upload a picture in "Photos"(I mean phone photos library) from the app.
Well this is a 3-part project:
1) To allow the user to select a photo from the iPhone library, create an instance of [UIImagePickerController|http://developer.apple.com/library/ios/#documentation/ UIKit/Reference/UIImagePickerControllerClass/UIImagePickerController/UIImagePickerController.html%23//appleref/doc/uid/TP40007070]:
UIImagePickerController *picker = [[UIImagePickerController alloc] init];
picker.delegate = self;
picker.sourceType = UIImagePickerControllerSourceTypePhotoLibrary;
[self presentModalViewController:picker animated:YES];
[picker release];
2) To get the data from the selected photo, implement [imagePickerController:didFinishPickingMediaWithInfo:|http://developer.apple.co m/library/ios/documentation/UIKit/Reference/UIImagePickerControllerDelegateProtocol/UIImagePickerControllerDelegate/UIImagePickerControllerDelegate.html#// appleref/doc/uid/TP40007069-CH3-SW8] in the picker controller's delegate:
- (void)imagePickerController:(UIImagePickerController *)picker
didFinishPickingMediaWithInfo:(NSDictionary *)info {
UIImage* image = [info objectForKey:UIImagePickerControllerOriginalImage];
NSData *jpegData = UIImageJPEGRepresentation (image, 1.0);
// dismiss controller and start upload here
3) Upload the jpeg data. Of course the details will depend on the site (E.g. see [ObjC - Post a UIImage by using NSData and NSURLRequest?|http://stackoverflow.com/questions/743903/objc-post-a-uiimage-by- using-nsdata-and-nsurlrequest]).
If you've never uploaded image data or an image file to a web site, step 3 is going to be the hardest, and in that case I would rcommend another thread with a title like "How to upload image to URL". Hopefully that will get the attention of programmers who have more experience with that topic than I do. Anyway it's an entirely different subject than you've described in the title of this thread.
Even if you have experience uploading data, I would recommend working on steps 1 and 2 first. You could check your work by adding these lines to the delegate example above:
BOOL result = [jpegData writeToFile:@"/Users/Raiden/Picture.jpeg" atomically:NO];
NSLog(@"jpegData=%@ result=%d", jpegData, result);
Once you get the desired picture into your test file, you can work on the upload, confident that your source data is correct.
- Ray

How to have correct report from CP5?

Hello experts,
I have a survey quiz from CP5, how ever when I check on report it shows nothing.
Can anyone help me to find out how to set this thing right?
Thanks many.

By default, survey questions in Captivate don't have scores attached, whereas graded questions do. Both types can report to an LMS. But only Graded questions report scores.
Changing the question type from Graded to Survey basically takes away the ability for the question to be given a score or marked Correct or Incorrect.
Note the captures below for exactly the same question with just a change to the Question Type:
This is Survey:
This is Graded:

Hi,Please guide me how to choose correct career in SAP r/3 technical side?

Hi, Experts.
I have 2.8 yrs experience in SAP B1 as a techno functional consultant but recently i am learning abap to move r/3 side. after learning abap can i get a job in ABAP or i need to learn any related CRM technical or ABAP-HR, in this which on is the most demand, please guide me in terms of job and future career or can i learn BI ? it's good for my career but iam thinking after getting few years experience in ABAP iam planning to move to BI.but job point of i here it's good openings so can i learn now itself BI ?or CRM technical or ABAP-HR ?please guide me how can take good decision on future career point of and to select good modules in SAP World.
Regards,
Kumar.

Have patience to start reading all from - [Re: Scope in SAP B1] ... you'll have the answer if not have it yet.
Please close this thread if answered.

Managing Workstation server from domain server

Hello,
I am trying to manage server Foundation 2012 which is not joined to domain from domain computer. For that I need to run command:
Set-Item WSMan:localhostClientTrustedHosts -Value <YourtargetServernameHere> –Force
but I get error:
Item : This command cannot be used in the current path because this cmdlet is not supported at this level of Provider path.
But what path should be? I cannot figure it out. I dont even understand what the error exactly means. Thank you.
Pete
sfs

Hi Pete,
Please try the cmdlet below and feedback:
Set-Item WSMan:\localhost\Client\TrustedHosts –Value "Ip address"
Best Regards,
Anna

How to reset OSB domain from EM point of view?

Hi folks,
Since I set up a OSB domain in EM on a client host for the very first time, the administrative server changed (actually moved inside firewall and hence changed its name, consequently I re-installed OSB on it from scratch). Now EM on the client host cannot locate the administrative server, and thus thinks the domain id down. When I try to edit hosts list using EM on the client host (Setup>Hosts), the link directs to the client host itself (like https://client001.example.com/?tab=2&mode=3). As the client host obviously runs no administrative part, the page does not exist.
On the other hand, when asked about OSB devices (Setup>Devices), EM correctly connects to the new administrative server name, and shows the correct answer. Same, obtool running on the client host can connect to the new administrative server and fetch settings from it (e.g. lshosts correctly displays the hosts in the domain).
Seems that the old administrative server name exists only within EM settings. I believe the best thing to do is to re-create OSB domain (from the EM point of view) with the new administrative server in it. How can I do that?
Thanks already for your answers.
Dmitry.

" emca -config dbcontrol db -repos recreate " does the job. Of course, as the repository is reset -- all other history records are lost.

How to join to virtual domain from windows 8.1 host ??

Hi there
does it possible to join to virtual domain from windows 8.1 host or not ??
I installed windows 8.1 on my system as host windows and then enable windows 8.1 hyper-v and installed windows server 2012 r2 and installed active directory domain service
now I want to join to this domain from my windows 8.1 but I can't . I create a user in active directory users and comupers and do it's DNS but can't complete .
give me this Error that may be the domain name is not correct or the user name or password is incorrect
please help me how can I join to virtual domain from windows 8.1 host in my pc ??
thanks
Regards :
Raha
whit the best regard : Raha

Yes, you can.
You will need to configure the virtual network switch as either internal or external.
Then, you'll need to specify the IP address of the virtual Domain Controller as a DNS Server on the Windows 8.1 device.

How connect to internet from domain created in Hyper-V

How connect to internet from domain created in Hyper-V
Host = Win8 Pro
Connection to internet done using WI-FI
Internet seeting
Home router with secury connection -> cable internet
Network name set on router = "Mtl2014"
Host setting
TCP/IPv4 Seeting for WI-FI ,connected to "Mtl2014"
Obtain address automaticly
Obtain DNS server address automaticly
I can connect and browse internet from host
In Hyper-V
1.created 2 private virtual switches SW1 and SW2
2.installed 2 VM HA1 and DC with Win2012 server eval edition
3.assigned stations HA1 and DC to virtual switch SW1
on Host
WI-FI network connection
Sharing->Allow other network to connect.. ->Home network connection vEnthernet (SW1)
in Hyper-V
choose Activate windows on HA1 and DC
open browser on HA1 and DC ,
At this point I am able to see and browse and search in google from HA1 and DC
In Hyper-V
assined virtual switch SW2 to DC and HA1
created Domain controler on DC and domain Alex1.com
TCP/IPv4 Seeting on DC
IP = 192.165.1.8
subnet = 255.255.255.0
default getaway = empty
Prefered DNS server = 192.165.1.8
TCP/IPv4 Seeting on HA1
IP = 192.165.1.11
subnet = 255.255.255.0
default getaway = 192.165.1.8
Prefered DNS server = 192.165.1.8
added HA1 to domain Alex1.com
Question
What seeting on SW2, DC, HA1 and Wi-FI should I change in order to have access to internet from Alex1\DC and Alex1\HA1?
I was planning to use internet to download/install pacthes/updates for windows and sql servers located on Alex1\
I plan to build 6 more Win 2012 server eval and join then to Alex1\
Thank you
Alex

I see.
1. 192.168.0.0 addresses are not routable across the public Internet. Even if the whole world knows you're using that space, the information is useless. But if you feel better hiding it, OK.
2. Internal doesn't allow communications with a physical network either. Only the external type does.
3/4. Your problem is not really with Hyper-V. It's with IP.
Your machines are all able to communicate with each other because they're on the same switch and the same subnet. No gateway is required. If you have a computer with an IP of 192.168.1.8 and its subnet mask is 255.255.255.0, then it will be able to communicate
with any computer on the same switch with an IP of 192.168.1.anything. It's when they need to talk to computers off of that subnet (anything that doesn't fit the 255.255.255 mask) that they have a problem. For that, you need a gateway somewhere. You can't
use "DC" for the gateway because it's not performing routing services.
You have two choices.
One is to use an external switch so that your guests are directly connected into your physical network. That will take over your WiFi adapter, so you'll probably want to set the share option so your Win8.1 box continues to function. Then just use a common
IP subnet with everything else on your home network.
The second is to set up a software router. If you are using an internal virtual switch, then this has to be in the Win8 environment. I might be mistaken, but I think that
Internet Connection Sharing would even work for this. If you are using an internal virtual switch, then your Win8 system should see two (or more) adapters. One of them is the physical adapter (we'll call it wNetAdapter) and one would be the virtual adapter
(we'll call it vNetAdapter) it uses on the virtual switch. Once you set up ICS, you would have all of your VMs use the IP address that you assigned to vNetAdapter as their gateway.
Eric Siron Altaro Hyper-V Blog
I am an independent blog contributor, not an Altaro employee. I am solely responsible for the content of my posts.
"Every relationship you have is in worse shape than you think."

How to add user from domain A to a group in domain B

How would you acheive adding a user from domain A to a group that is in domain B via powershell without the Quest cmdlets? I've been trying to figure this out for about a week now. Please let me know if the scripting guy has seen this issue before.
LittleTech

Hello jrv,
Here's what i was trying to do. The two domains im working with have a trust between them.
1. Create a user in External.Domain.Com
2. Add the user in External.Domain.Com to GroupOne in ExternalDomain2.Domain.com
3. The only knowledge that ExternalDomain2.Domain.Com would have about the account in External.Domain.Com is whatever is in the Global Catalog. Here is what im trying, but it isn't working.
#Connecting to domain PSDrive
New-PSDrive
-Name
ExternalDomain
-PSProvider
ActiveDirectory
-Root
-Server
DC01.Domain.com
cd
ExternalDomain:
#Create user
#Add to ExternalDomain Groups
$UserDN=Get-ADUser-LDAPFilter"(sAMAccountName=$UserID)"
#Connecting to domain2 PSDrive
cd
AD:
$GroupDN="CN=Wireless
Device Users,OU=Wireless,OU=Systems and Technology,DC=External,DC=Domain2,DC=Com"
Add-ADGroupMember-Identity$GroupDN-Members(Get-ADObject-Identity$UserDN.DistinguishedName
-Server"DC01.Domain.com:3268")
Connecting via port 3268 allows me to talk to the global catalog instead of LDAP.
I receive the following message: A Referral was returned from the server
I know that if i connect using [ADSI] i am able to specify that the connection follows referrals, the AD cmdlets seem to not have that function. The Quest AD cmdlets do... I just dont want to have to use third party cmdlets to do what the AD cmdlets should
be able to do in the first place.
THanks,
LittleTech

How can we change local administrator password in 500 machines in a domain from a centralized location?

How can we change local administrator password in 500 machines in a domain from a centralized location?

This was moved out of the Profile forum.
You should ask this question at
www.answers.microsoft.com.
Or I can move it into another forum if you'd like.
Thanks!
Ed Price a.k.a User Ed, Microsoft Experience Program Manager (Blog,
Twitter,
Wiki)

How to retrieve data from domain(Value Range) of the table

hi
how to retrieve data from domain(Value Range) of the table
thanks

Hello,
You can try using the FM: DOMAIN_VALUE_GET TB_DOMAINVALUES_GET.
BR,
Suhas
Edited by: Suhas Saha on Mar 24, 2009 10:08 AM

How to choose correct domain from 2 domains

Similar Messages

Maybe you are looking for