How to choose ISOcoated_v2_300_eci.icc in the colour settings?

Hello again!
I am using CS4 on a Mac OS X 10.6.8 and would like to use the ISOcoated_v2_300_eci.icc colourprofile in Photoshop and InDesign. I downloaded it from eci.org and saved it in /System/Library/ColorSync/Profiles AND in /Library/Application Support/Adobe/Color/Profiles/Recommended.
problem1: When I want to select this profile now in PhotoshopCS4 and/or InDesignCS4 it is not listed in the profile-settings so I am not able to choose this one
problem2: Same is happening with ISOcoated_v2_eci.icc
Unfortunately i am working in German so the Screenshot will show the setting-proplem not in English!
Thanks a lot!
Hallo mal wieder!
Ich nutze CS4 auf einem MAC OS X 10.6.8 und würde gerne das ISOcoated_v2_300_eci.icc Farbprofil nutzen - in Photoshop und InDesign. Ich habe es direkt von eci.org und unter /System/Library/ColorSync/Profiles UND in /Library/Application Support/Adobe/Color/Profiles/Recommended gespeichert.
Problem1: Wenn ich in PhotoshopCS4 und/oder InDesignCS4 jeweils unter Farbeinstellung in der obersten Leiste 'Einstellungen' dieses Farbprofil auswählen möchte, wird es mir nicht zur Auswahl gegeben.
Problem2: Das gleiche verhält sich mit ISOcoated_v2_eci.icc
Der Screenshot zeigt die derzeitige Situation mit der Problem-Spalte!
Danke euch!

When you download the color profile, right-click and choose INSTALL, then the color profile should appear in the color settings.

Similar Messages

HT201320 I have just set up my email accounts, calendars etc on my new iphone5s, but seem to be stuck in 'Mail, contacts and calendar' section. How do I get back to the general settings page?

I have just set up my email accounts, calendars etc on my new iphone5s, but seem to be stuck in 'Mail, contacts and calendar' section. How do I get back to the general settings page?

Solved! Turn it off and on again!

Error could not synchronise the colour settings because of a program error

Keep getting this error could not synchronise the colour settings because of a program error
and it crashes when trying to print

Color Settings are synced through Bridge. Try re-syncing the Color Settings in Bridge (See: Creative Suite * Keeping colors consistent)
If that doesn't work, try resetting Photoshop's preference settings: Photoshop Help | Preferences

TS3276 How do I reconfigure Mail to the new settings required by Verizon? If I don't comply by Sept. 2013, my mail service will be interrupted. The following is the message that I received from Verizon:

How do I reconfigure Mail to the new settings required by Verizon. If I don't comply by Sept. 2013, my mail service will be interrupted.
The following is the message that I received from Verizon:
Please update your POP email application’s inbound and outbound server settings as soon as possible to match the new settings below:
Server                    Current Setting                  New Setting                  SSL Enabled               Port
POP3 Server       incoming.verizon.net           pop.verizon.net                       YES                   995
SMTP Server        outgoing.verizon.net         smtp.verizon.net                      YES                   465
TIPS: Depending on your email application, you may need to turn off Secure Password Authentication and, if applicable, make sure your Authentication method is set to “Password” or “Normal password.” In addition, you may need to restart your device for these new settings to take effect and for your email to continue working properly.

On 10.7 (most any other versions should be similar) Mail > Preferences > Accounts > select account > Account Information, and confirm that the Account Type at the top is POP.
If it's currently working and is shown as an IMAP account, then please stop now, and reply back here with that detail.
If the account is shown as a POP account, then update the incoming (receive-path) mail server to match Verizon's message if your current settings show a different mail server, then select the Advanced tab to set the port and to enable SSL, and also ensure that the Authentication setting has "Password" selected...
Now for the outbound (SMTP) path... Back over to the Mail > Preferences > Accounts > select account > Account Information tab, and switch the Outgoing Mail Server (SMTP) selector to "Edit SMTP Server List" item to get to the "outbound" mail settings and select the Verizon SMTP server account from the list shown at the top and select the Account Information tab and ensure that the server name matches what Verizon has now specified, and then select the Advanced tab, select Use Default Ports and check the Use Secure Sockets Layer box.

How do I stop Acrobat changing the colour temperature of my 24" LED display

When I run an Acrobat in full screen mobe on my MacBook Pro connected to my 24" LED Cinema display it changes the colour temperature of the screen making it overly warm. The only way to rectify this is to go into system settings > displays > colour and select my callibrated profile.
Does anyone have the same problem or a fix?
Model Name:    MacBook Pro
Model Identifier:    MacBookPro5,1
Processor Name:    Intel Core 2 Duo
Processor Speed:    2.8 GHz
Number Of Processors:    1
Total Number Of Cores:    2
L2 Cache:    6 MB
Memory:    4 GB
Bus Speed:    1.07 GHz
Boot ROM Version:    MBP51.007E.B05
SMC Version (system):    1.33f8

I am having a similar problem that I just began noticing. When I go to Full Screen mode my display darkens, and I have to go to the color settings in my display preferences to reset it. It is very dark. I have only noticed this in the last week or so. I thought it was related to hooking up to a digital projector, but it happens whether I am hooked up to an external display or not.
The only other thing that happened in the last couple of weeks was a software update, and I am convinced it is a software problem isolated to Acrobat Pro 9.3.4. If I open a file in Adobe Reader 9.2.0 and go to full screen mode everything is fine.
I am also working on a MacBook Pro.
Model Name:    MacBook Pro
Model Identifier:    MacBookPro5,4
Processor Name:    Intel Core 2 Duo
Processor Speed:    2.53 GHz
Number Of Processors:    1
Total Number Of Cores:    2
L2 Cache:    3 MB
Memory:    4 GB
Bus Speed:    1.07 GHz
Boot ROM Version:    MBP53.00AC.B03
SMC Version (system):    1.49f2
This is really irritating, because it darkens images to the point that the details in photos are lost.

How to restore Macbook Pro to the factory settings

I'd like to restore my Macbook Pro(Snow Leopard 10.6.8) to the factory settings, but I lost the installation DVDs that shipped with it.
Is there any solution for this?
Thanks.

Hi,
Thank you.
I attached two pictures, and hope the information would be helpful.
I think it's even before 2009...

With this latest update (on 4/10/15) I am unable to access a secured work website due to the TLS. How do I revert back to the previous settings?

I need to revert the security settings back to the way they were BEFORE the update because now I am unable to access my secured work website (that I was on yesterday) to actually do work. When I attempt to go to my log-in page I get the following message:
Secure Connection Failed
The connection to corect.ct.gov:10000 was interrupted while the page was loading.
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem.
It doesn't even give me the option to allow the site (it is my computer after all, it should be my choice). I NEED TO GET TO THIS WEBSITE.

The website may try to fallback to TLS 1.0 in a way that is no longer allowed in current releases or may be using a deprecated cipher suite.
You can open the <b>about:config</b> page via the location/address bar and use its search bar to locate this pref:
*security.tls.insecure_fallback_hosts
You can double-click the line to modify the pref and add the domain (corect.ct.gov) to this pref.
If there are already websites (domains) in this list then add a comma and the new domain (no spaces).
You should only see domains separated by a comma in the value column.
*https://developer.mozilla.org/en-US/Firefox/Releases/36/Site_Compatibility#Security
*https://developer.mozilla.org/en-US/Firefox/Releases/37/Site_Compatibility#Security

Help: How to choose egress interface by the internal source IP in ASA5520?

Hi there,
I'm using ASA 5520: ASA ver 8.4(4)1, ASDM ver 6.4(9), firewall mode: Routed.
There are 2 WAN Interfaces for this ASA: Port 0/3 named 100M; Port 0/0 named Outside.
One LAN interface is Port 0/1 (10.1.0.0/16) There are 2 groups of users, which can be diffentiate by their IP addresses.
UserGroup A: 10.1.6.0/24; UserGroup B is all other LAN users, 10.1.0.0/16, except 10.1.6.0/24.
I'd like to route the Internet traffic as below:
When A accesses Internet, traffic goes thru Port 0/3.
When B accesses Internet, traffic goes thru Port 0/1.
I can't set static-route by checking their source IP, I can't set policy based routing either.
How can this be achieved in my ASA5520?
Thanks,
Tony

Hi,
I guess you need to use a separate router to do the PBR on the basis of the public NAT IP address (and then choose the correct gateway) of the users or build something on the LAN side in the sameway
I guess you could also separate the users on different LAN networks and change the ASA to run in multiple context mode and create different firewall context for both LAN networks (I think every ASA has a license that permits 2 context (admin context isnt counted into this), you can check it with "show version" command). Then again this option would eliminate the use of VPN. (Though L2L VPN are supposedly coming available in multiple context mode later)
Something tells me though that the second option would simply mean too much work or if you are using VPN on the ASA it would mean you would need separate VPN device.
- Jouni

HT204380 How do I get rid of the coloured spinning wheel

Coloured spinning wheel stops safari

This is the iPod touch forum, thus assuming you are haveing athat problem with your iPod
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Otherwise post in the correct forum and provide more info like does it happen when you open Safari?
Do other programs work OK?
Didt it work OK before?

How to choose optimal value for the OPEN_CURSOR parameter in init.ora?

15:05:35 SQL> select count(*) from v$open_cursor;
COUNT(*)
5159
15:06:28 SQL> select count(*) from v$open_cursor WHERE user_name='USER1';
COUNT(*)
2369
15:06:48 SQL> select count(*) from v$open_cursor WHERE user_name='USER2';
COUNT(*)
686
Currently, application using these number of open cursors?
How to set the optimal value for this application?

Hi,
>>With the above setting I have yet to get any errors due to cursor limits. A good trade off memory v issues.
To see if you have set OPEN_CURSORS high enough, monitor v$sesstat dynamic performance view using the SQL below for the maximum opened cursors. If your sessions are running close to the limit, maybe you should increase the value of OPEN_CURSORS.
select max(a.value) as highest_open_cur, p.value as max_open_cur
from v$sesstat a, v$statname b, v$parameter p
where a.statistic# = b.statistic#
and b.name = 'opened cursors current'
and p.name= 'open_cursors'
group by p.value;In addition, I advise you to take a look at your PL/SQL code in order to see if the explicit cursors have been close (if it was the case), or if your SQL code can be tuned ...
Cheers
Legatti

How to choose .app files in the FileOpenChooser dialog?

Hi,
I am working on a plugin and want to allow the user to browse through the system to choose an .app (Application) file on Mac.
Currently I'm using OpenDialog() function of SDKFileOpenChooser dialog for this. It's working correctly on Windows but on Mac, when the dialog opens up, .app file appears to be disabled (Not selectable).
Please tell me what filter should I add so that one can choose files with extension .app.

I am using SDKFileOpenChooser dialog. To add filter, we either need TypeInfoID for that file or FileType and extension.
Using this code, I found out the typeInfoID for .app files. It came out to be 291.
TypeInfoID tpID = FileTypeRegistry::GetFileTypeInfoIDForFile(appIDFile);
Then I tried to add filters in both ways, it's still appear to be disabled (not selectable). Thus, not allwoing to choose .app files.
SDKFileOpenChooser openChooser;
            FileTypeInfo currentFiletypeInfo = FileTypeRegistry::GetCurrentFileTypeInfo(291);
            openChooser.AddFilter(currentFiletypeInfo.GetFileType(), currentFiletypeInfo.GetFileExtension(), "App_Filter");
                                                                           or
            openChooser.AddFilter(291, "App_Filter");
openChooser.ShowDialog();
Can anyone please help me.

How to create connection objects in the NTDS settings container of a DC with LDIFDE

The following link shows some examples of how to automate creating subnets without having to use the sites and services console: http://codeidol.com/active-directory/active-directory/Site-Topology/Creating-a-Subnet/
My question is how can use LDIFDE to create connection objects? We don't use the defaultipsitelink and are creating the connections manaully. How can I use LDIFDE to create connection objects like this? I have not been able to find any examples on the internet.
Thanks for any replies.

KCC does the job of creating connection object automatically reading site/subnet/sitelink info, so why you need to create manually.
http://blogs.technet.com/b/markmoro/archive/2011/08/05/you-are-not-smarter-than-the-kcc.aspx
Regards
Awinish Vishwakarma
MY BLOG:
http://awinish.wordpress.com/
This posting is provided AS-IS with no warranties/guarantees and confers no rights.

My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management

I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
Could there may be a setting somewhere that I need to adjust please? I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
<Edited by Host>

Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.

How to change colour settings on Satellite Pro P300

I just got my new laptop and can't for the life of me find how to change the colour settings in the monitor.
On my old desktop there was a button on the monitor.
Being a first time laptop user im going nuts trying to find how to change my monitor settings...
If anyone can help id be so grateful

Please dont mix the notebooks internal monitor with the external desktop PC monitor.
You will not find any control unit like on the external monitor which would help you to change the color.
I dont know what graphic chip your notebook uses but my notebook supports Intel graphic card and the preinstalled Intel graphic media accelerator (in control panel) provides some settings for color correction;
The settings are; color, gamma, brightness and contrast
There you can set the values between 0 and 100
Maybe this is what you are looking for

How to choose which Aperture duplicate photo to keep

I use Aperture 3.4.5 on an iMac with OS 10.8.4 and, like many others who have written to this community, I have acquired lots of duplicates because some years ago I moved from iPhoto to Aperture. Those collections are mostly referenced in their original collections. I quite understand how these duplicates came to be. Using Duplicate Annihilator - Aperture I have found a great many (4 thousand) pairs of duplicate pictures out of a library of 60 thousand, and as has been explained by several responders, usually one is called iPhoto Original and the other iPhoto Externally Edited or iPhoto Edited. I have never knowingly used an external editor, but I do understand that, in iPhoto, just rotating the photo from portrait to landscape will create a copy, something that does not happen with Aperture. So that is why the dupliocates exist. My question is basically, now that I have found them, how to choose which one of the two versions to keep, because there seems no reason to keep these duplicates.
Obviously if I have made noticeable changes, or added many key words, then I want to keep that one. The duplicates in question are in two-photo Stacks. The original will have a size of 3 MB or 4Mb and the copy will have a smaller size, maybe as little as 1.5 or 2 MB. Sometimes the copy has just been rotated (and the file size is made smaller). With Aperture I can rotate the original iPhoto picture and maintain the larger size. Sometimes (but not always) there is a name change from xxxx to xxxx.jpg. But even without a name change, the edited or rotated file is smaller. I have examined the two images at high resolution, in Aperture, and I cannot see any difference, though they have very different sizes. This surprised me; there seems no benefit from the larger size, though there is a slight shift of the histogram of colors. (I do not plan to print any of these at high resolution, just show them on the iMac or a video.)
So my question is: is it desirable to keep the larger original file, though I do not see a difference in the image on my 27in iMac? I have many of these duplicates to choose between, and I would like to understand the consequences of my choice before I delete things.

I would keep the larger as long as storage space wasn't an issue and if it was I'd look at increasing storage before deleting the larger file.
Think of it this way the larger files contains more data, more data means not only a better image (even if you cannot see a difference on the monitor) but also more options when you go to edit the image.
Cropping is just one obvious example. A larger file will give you more options when it comes to cropping the image.
You can always create the smaller from the larger, you can;t go the other way. Once you delete the larger file the data is lost for good.

How to choose ISOcoated_v2_300_eci.icc in the colour settings?

Similar Messages

Maybe you are looking for