How to choose the Color of your MacBook ?

Hi,
I want to buy a white MacBook pro with 15 inches.
This is not available at this time.
Why we can't customise the MacBook's hull?
I demand to have the choose between black, grey and white for each MacBook's hull.
Other OS Ubuntu Linux

The MacBooks are offered in white or black... the Pro is offered in silver/gray (the color of the aluminum casing). As an earlier post indicated, there are vendors that will do this for you. They're a bit expensive, but they do a good job.
The newest MacBook Pro is probably the best notebook out there for the price. No one else puts out something similar in the same price range. While it might be nice to be able to pick from several colors, the color really shouldn't be a primary factor in your purchase decision.

Similar Messages

How to adjust the color profile on Macbook Pro/IMAC for Brother printers?

Hi,
We have both iMACs and MacbookPro w/Leopard 10.5.4 in our office. They also run the Parallels software with Windows XP. We have 2 color printers in the office, a Canon and a Brother 4070cdw. When I make a color print, the output looks very different from the 2 printers. The Brother printer produce very light copies, almost look like there's a white wash over it. I called Brother and went through all kinds of test and they finally said it's not the printer, but the color setting on the Mac. I didn't believe them at first, but then i did a test. I print a color page from the WindowsXP side on my Mac, and print the same page from the Mac side, and the results are very surprising. They look very different, like from 2 different printers; again, the one form MAc is very light.
I then opened up "system perferences" and tried to play around with the different color profiles under "Display". But the changes did not affect the print outcome much. Please help. Thank you very much.

To prepare a computer for sale or donation, in addition to the steps mentioned in this support article, take these steps:
If you set a firmware password, remove it by running Firmware Password Utility in Recovery mode.
If you activated FileVault in OS X 10.7 or later, turn it off.
If you use Boot Camp, the partition must be deleted
If you created any other data partitions on the internal drive, remove them in Disk Utility.
Erase the data partition(s) with the option to zero out data. An SSD doesn't need to be zeroed.
You can't legally or practically transfer any software downloaded from the Mac App Store to the new owner of the machine, even if it was free. That includes OS X, so if you paid for an upgrade OS X 10.7 or later, you must reinstall the original OS, either from the installation media, if applicable, or by booting into Internet Recovery (option-command-R at the startup chime.)
The new owner will have to repurchase the software, if need be, under his or her Apple ID. If you ever updated the bundled iLife applications (Garage Band, iMovie, and iPhoto) through the App Store, you can't transfer them either.
Remove the machine from your list of registered products. If it's still covered by an AppleCare Protection Plan, transfer the coverage to the new owner by following the instructions in the AppleCare Terms and Conditions (under the heading "Transfer of Plan.")

First off this is not a problem it inquery into how to change the color of your basic icons so they are easier to recognize among the rest of my icons.

I have used different version of FF before and was not able to change the appearance(to be able tweak it with color or style to fit my personality or mood) of the toolbar icons so I hoped that FF 4 would have added that option although I have not found that to be true as yet or am I not looking in the correct place to find that feature.

Try a different Firefox theme (Tools > Add-ons > Appearance/Themes):
*Firefox 3 theme for Firefox 4: https://addons.mozilla.org/firefox/addon/firefox-3-theme-for-firefox/
*Strata XP: https://addons.mozilla.org/firefox/addon/strata-xp/
*Native XP: https://addons.mozilla.org/firefox/addon/native-xp/

HT204266 how to choose the language of your apps

I'm downloading my apps in the belgian store but I want them in english not flemish or french what should I do (considering that the apps have the english listed in the available languages)

HI ,
Welcome to Adobe Community.
If you need to install the product in a different language, you can simply Launch Creative Cloud Desktop and click on the settings tab on the top righ hand corner . Within the settings tab , You will find the option to click on APPS. Once we navigate to apps ,you will have the option to change the Language there .

How do you download data from your macbook to the ipad?

how do you transfer data from your macbook to the ipad?

What data do you want to transfer ? Music, films, tv shows, photos and ibooks are done by syncing in iTunes (for which there is some help in the iPad manual which can be downloaded from here http://support.apple.com/manuals/#ipad). Documents can also be done via iTunes, but it depends upon the app and the transfer method(s) that it supports e.g. file sharing via the bottom of the device's apps tab on your computer's iTunes, via your wifi network, cloud services, email attachments etc
Edit : have you got the Keynote app on your iPad, or any other app that supports keynote presentations ? Without a 'suporting' app you can't store a document/file on the iPad (unlike computers files have to be stored within an app)..
Message was edited by: King_Penguin

How to change the color of SOLIDS ?

Hi there,
In the Effects panel, I select the color solids, we only have green and a few colors. I chose the green one as the background.
Then I wanna choose my own color by changing the color of the green but my eyes are blind, I cannot find where the selection are ?
Can anyone be kind enuf to let me know where the switch is ? How to change the color of the solids to be used as background ?
Thanks
Chers

Luis Sequeira1 wrote:
Drag your generator to the timeline. Select int. Look at the Inspector, in the top right corner (if the inspector is not open, you can use Cmd-4 to open it). At the top of the inspector, you have three buttons: "Generator", "Video", and "Info". Click on "Generator" and you get a drop down menu allowing you to choose one of six colors.
If none of these six serves you well, you can then click on "Video", and use the Color tools to set it to anything you want.
Thanks Luis for your detailed explanation ... it worked !

I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?

I downloaded and bought a movie from iTunes on my iPad and now want the same movie on my MacBook Pro but its not offering me to download it, it giving me the options of buying it which I already did. How I get the movie onto my MacBook?

You can connect the iPad to your Mac's iTunes and do File > Devices > Transfer Purchases, that should copy it over to the Movies part of your library.
Depending upon what country that you are in, and whether the film studio allows it, you might also be able to re-download it on your Mac via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page.

How to change the color of Menu links in obiee

Does anyone knows how to change the colors of Menu links in obiee. With menu I mean the menu links default right top (Search, homepage, Catalogus, Dashboards, new, Open). This should be set in skin and style files, not? I searched a lot. I could not find It. It is now Oracle blue, we want to change this.
obiee 11.1.1.5.
Thanks

You have to customize portal banner and portal content CSS files as needed in OBIEE server.
below links will guide u but will will not tell you exactly but your req can be done by customizing portal content and portal banner CSS files. try to identify the exact code using firebug in mozilla.
http://www.rittmanmead.com/2009/04/customizing-obiee-dashboard-banners/
Customization of login page, banner,logo in obiee11g
Thanks
Jay.

By mistake i erase my macbook pro hard disk how to reinstall the yosemite on my macbook because it donsnt read the bootable drive?

by mistake i erase my macbook pro hard disk how to reinstall the yosemite on my macbook because it donsnt read the bootable drive?

usamafrombeverly hills wrote:
when i start the macbook & press cmd+R it goes to the internet recovery
Well then when you erased your hard drive, your erased the Recovery partition, also.
Use Internet Recovery to either restore from your Time Machine backup or reinstall the OS if you don't have a TM Backup.
It will install the OS that shipped on that Mac. You can then upgrade via the App Store.

How to change the color for HTML words in JEditorPane?

Hi Sir,
In the JTextPane , we could change the word's color by using:
Style style = doc.addStyle("test",null);
StyleConstants.setForeground(style, Color.red);
doc.setCharacterAttributes(10,20,syle,true);
we can change the text into red color,which range is from 10 to 30.
But how to change the color for HTML words in JEditorPane?

Hi,
you can use an AttributeSet to apply the foreground color. Let's say, doc is a HTMLDocument, then SimpleAttributeSet set = new SimpleAttributeSet();
doc.getStyleSheet().addCSSAttribute(set, CSS.Attribute.COLOR, "#0D0D0D"); would apply a color to a given AttributeSet. The AttributeSet with your color then can be applied to a selected range of text in a JEditorPane by /**
   * set the attributes for a given editor. If a range of
   * text is selected, the attributes are applied to the selection.
   * If nothing is selected, the input attributes of the given
   * editor are set thus applying the given attributes to future
   * inputs.
   * @param editor the editor pane to apply the attributes to
   * @param a the set of attributes to apply
public void applyAttributes(JEditorPane editor, AttributeSet a) {
    ((HTMLDocument) editor.getDocument()).getStyleSheet().addCSSAttribute(set, CSS.Attribute.COLOR, "#0D0D0D");
    editor.requestFocus();
    int start = editor.getSelectionStart();
    int end = editor.getSelectionEnd();
    if(end != start) {
      doc.setCharacterAttributes(start, end - start, a, false);
    else {
      MutableAttributeSet inputAttributes =
        ((SHTMLEditorKit) editor.getEditorKit()).getInputAttributes();
      inputAttributes.addAttributes(a);
} Ulrich

How to change the color of a font/sentence ?

what is a quick and easy method to change the colour of a sentence?
thanks!!!

what are you asking here?
i'm confused because your questions is so simple
the answer is to set the color of the text before you render it out
if you're asking how to change the color AFTER it's in an image, well you can't, not by using the API anyway, you'll have to do some magic

May I know how to change the color of texts inside the indicator box?

Can anyone tell me how to change the color of texts inside the indicator box? I have tried to use property node but not really know how it functions.
In fact, I am writing a program for which the number inside indicator on front panel will show red color if the measured value can't reach the requirement. I am using LabView 6.1 Professional
Thank You for your attention!!!!!!

Simply use a property node with "NumText.TextColor" and wire the correct color depending on your test result.
The attached simple example (LV 6.1) lets you change it from the front panel. In your case, you would use your test output instead of a FP switch, of course. Message Edited by altenbach on 05-25-2005 09:05 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
TextColor.vi ‏18 KB

HT201303 Do any of you apple geniuses out there know how to retrieve the answers to your security questions or at least reset them? Apparently its to much for the support team. Can't get an answer out of them...

Do any of you apple geniuses out there know how to retrieve the answers to your security questions or at least reset them? Apparently its to much for the support team. Can't get an answer out of them...

Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
Go to: Apple Express Lane;
Under Product Categories choose iTunes;
Then choose iTunes Store;
Then choose Account Management;
Press Continue;
Now choose iTunes Store Security and answer the bullet questions, then click Continue;
Sign in with your Apple ID and press Continue;
Under Contact Options fill out the information and advise iTunes that you would like your security/challenge questions reset;
Click Send.
You should get a response within 24 hours by email.
Presently there appears to be problems on Apple's end, so it may be quite some time before they respond.
Another user posted the following:
I got some help from an apple assistant on the phone.
It is kind of round about way to get in
Here is what he said to do and it is working for me...
1) on the device that is asking you for the security questions go to "settings", > "store" > tap the Apple ID and choose view"Apple ID" and sign in.
2) Tap on payment information and add a credit/debit card of your preference then select "done", in the upper right corner
3) sign out and back into iTunes on the device by going to "settings"> "store" > tap the Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you should be asked to verify your security code for the credit /debit card and NOT the security questions.
4) At this time you can remove the card by going back in to edit the payment info and selecting "none" as the card type then saving the changes by selecting "done". You should now be able to use your iTunes store credit without answering the security questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends!

How to change the color in "blocks" effect

Hi,
I've got a problem with Motion.
I use a "behaviour" effect on my text that is called "blocks".
When I set parameters to default, I see a blue effect with some red blocks in backgroud.
I want to turn this effect into a green effect.
The problem is that when I change the color into green, there is still a strange orange color on some blocks.
I've added all the color parameters (face, shadow...)that I thought it could be due to but nothing changes. I still have this strange color on some blocks.
The strangest thing is that it sometimes becomes ok when I make the changes but when I save and re-open my file in FCP or Motion, it isn't ok.
Has anyone already used this effect and seen that problem?
Thanks for your help...
Sand
Mac OS X (10.4)
Mac OS X (10.4)

Text behaviors work by sequencing the Text's parameters.
Try changing the color of your text's outline.
Select the Text tab in the Inspector
Go to the Style sub tab
change the Outline color to green
Hope that helps.

How to delete the apps from your iPhone's purchased list in ios 7

How to delete the apps from your iPhone's purchased list in ios 7

You would need to set up the Hotmail account as a IMAP instead of a POP3 account.

How to choose the Color of your MacBook ?

Similar Messages

Maybe you are looking for