How to choose the destination podcast folder?

Hi,
Currently, my podcasts are downloaded and stored on my C: drive, but this is taking a lot of space and I would like them to be installed on the D: drive which has a lot of space. How can I do this? I did not find a setting which enables me to choose the folder destination.
Someone has an idea?
Pascal

I believe you would have to change your iTunes folder location and the Podcast folder would move with it. That is the only way I know how to do it.

Similar Messages

  • How to restrict the size of folder in KM?

    Hi All,
    How to restrict the size of folder in KM?
    Suppose I allocated 1 personal folder to every SAP KM Folder. Can I restrict the size of folder with do not allowed the uploaded file to be exceeded certain capacity?
    Thanks & Regards,
    zhixuen.

    Hi,
    Refer this [http://help.sap.com/saphelp_nw70/helpdata/en/62/468698a8e611d5993600508b6b8b11/content.htm]
    Also chk.
    https://forums.sdn.sap.com/thread.jspa?threadID=80571
    https://forums.sdn.sap.com/thread.jspa?threadID=80326
    https://forums.sdn.sap.com/thread.jspa?threadID=80145
    http://weblogs.sdn.sap.com/pub/wlg/3219
    Regards
    Baby

  • How to assign the iCloud/Contacts folder as an Adress Book in Outlook 2013?

    I just Installed Office 2013
    In the old Outlook 2010 I was able to use the Icloud Contacts as my Address Book.
    In Outlook 2013 the option in iCloud/Contacts/Properties/Outlook Address Bookk is dimmed.
    How to assign the iCloud/Contacts folder as an Adress Book in Outlook 2013?

    Hi,
    For more methods of making Shared Contacts available as an Address Book, you can refer to the following articles:
    http://social.technet.microsoft.com/Forums/en-US/9d20ffad-d49a-4aa3-8d49-c63b8d4583ee/adding-shared-contacts-to-the-address-book-without-public-folders-in-outlook-2010?forum=outlook
    Add shared Contacts folder as Address Book list:
    http://www.msoutlook.info/question/614
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
    sure that you completely understand the risk before retrieving any suggestions from the above link.
    Hope it can help you.
    Thanks,
    Angela
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How to load the destination url of af:goLink   component to a REGION?

    Hi,
    I've a tree in which every node is <af:goLink> component. How to load the destination url of <af:goLink> component to a REGION? Can anyone please tell me whether it is possible or not?
    Thanks
    -Sukumar

    Hi,
    Thanks for the reply. I have looked at the blog.
    But my scenario is little bit different. I'm not trying to load a JSF fragment page or a JSF page or a html page. I'm trying to load a url page which is not related to the applicaton. Eg: I'm trying to load "www.my.oracle.com" web page in the region. So I must use a <af:goLink> component. Please correct me if i have misunderstood the concepts".
    Thanks
    Sukumar

  • How to choose the good Network Interface on a server ?

    Hi all,
    On server you have generally more than one ip address so ...How to choose the good Network Interface on a server for the NoSQL Node ?
    Thank you for all
    C.Pruvost.

    Hi Charles I only consider storage nodes and their replicated nodes.
    Actually I show an error in the logs saying that one of my storage node use a loopback address. On my laptop I have a network interface and a loopback address (disabled)...when starting sn1 I show that the port 5000 is only linked to the ip address 0.0.0.0 so it is not the good ip address..although i use for configuring :
    java -jar ..\lib\kvstore-2.0.23.jar makebootconfig -root root1 -port 5000 -admin 5001 -host ipaddress_of_my_laptop -harange 5010,5020
    and after
    java -jar ..\lib\kvstore-2.0.23.jar start -root root1
    If you have a sample tutorial that explains how simulate on the same laptop an Oracle NoSQL architecture running on 3 disctinct servers please give us this information.
    Thank you for all.
    Christophe.
    PS : error message
    Failures: Task 1 ERROR at 2013-01-15 07:23:19 UTC: DeploySN sn3(pruv
    ost-pc:5200): 1/DeploySN failed.: Register: Cannot mix loopback and non-loopback
    addresses in the same store. The store value is not configured to use loopback
    addresses but storage node pruvost-pc:5200 is a loopback address. (11.2.2.0.23)
    : Register: Cannot mix loopback and non-loopback addresses in the same store. T
    he store value is not configured to use loopback addresses but storage node pruv
    ost-pc:5200 is a loopback address. (11.2.2.0.23) java.lang.IllegalStateException
    : Register: Cannot mix loopback and non-loopback addresses in the same store. T
    he store value is not configured to use loopback addresses but storage node pruv
    ost-pc:5200 is a loopback address.
    at oracle.kv.impl.sna.StorageNodeAgent.register(StorageNodeAgent.java:15
    48)
    at oracle.kv.impl.sna.StorageNodeAgentImpl$2.execute(StorageNodeAgentImp
    l.java:194)
    at oracle.kv.impl.sna.StorageNodeAgentImpl$2.execute(StorageNodeAgentImp
    l.java:188)
    at oracle.kv.impl.fault.ProcessFaultHandler.execute(ProcessFaultHandler.
    java:90)
    at oracle.kv.impl.sna.StorageNodeAgentImpl.register(StorageNodeAgentImpl
    .java:186)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
    java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    sorImpl.java:25)
    Edited by: chpruvos on Jan 14, 2013 11:24 PM
    And my ipconfig
    Windows IP Configuration
    Wireless LAN adapter Wireless Network Connection 2:
    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Ethernet adapter Local Area Connection 3:
    Connection-specific DNS Suffix . :
    IPv4 Address. . . . . . . . . . . : 172.20.10.2
    Subnet Mask . . . . . . . . . . . : 255.255.255.240
    Default Gateway . . . . . . . . . : 172.20.10.1
    Ethernet adapter Local Area Connection* 24:
    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Wireless LAN adapter Wireless Network Connection:
    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Ethernet adapter Local Area Connection:
    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    and
    C:\Users\cpruvost>ping pruvost-pc
    Pinging PRUVOST-PC.fr.oracle.com [172.20.10.2] with 32 bytes of data:
    Reply from 172.20.10.2: bytes=32 time<1ms TTL=128
    Reply from 172.20.10.2: bytes=32 time<1ms TTL=128
    Reply from 172.20.10.2: bytes=32 time<1ms TTL=128
    Reply from 172.20.10.2: bytes=32 time<1ms TTL=128
    Ping statistics for 172.20.10.2:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    Edited by: chpruvos on Jan 14, 2013 11:25 PM

  • HT204053 How to choose the rihgt Apple ID on the App Store when it keeps using a unfunctional one?

    How to choose the rihgt Apple ID on the App Store when it keeps using a unfunctional one?

    Are you saying you don't know how to sign out, then back in with the proper Apple ID to carry out the update?
    iOS: Changing the signed-in iTunes Store account
              http://support.apple.com/kb/HT1311

  • How to get the destination path in an photoshop sdk export plugin when using a batch action?

    Hello,
    I've written an exporter plugin (not save-as) that exports a given file to a custom format.
    I was able to open a file selector dialog and choose a path that is then transported to the saving location.
    Now my problem is: Another intended use is batch exporting many files. The user records an action with the export step and then applies a batch on it.
    The PS batch window allows you to select the destination to be a directory where the exporter should write the data. Fine.
    Now how do I get this path? When running in batch mode the silent flag is set for my plugin so I do not spawn a file selector dialog to annoy the user.
    But I am also unable to obtain the path which was selected by the user in the batch window.
    The SDK automation plugin Getter has some code to retrieve the path of the file and even that fails as it cannot obtain anything.
    PropertyUtils.h has some PIGetWorkPathIndex and PIGetPathName functions but I always get 0 when asking PIGetNumberPaths, and get -1 with PIGetWorkPathIndex.
    I would be thankful if somebody could hint me how I can retrieve directories.
    It even seems impossible for me to get the path where the file is actually saved. The filter plugin called Propertizer utilizes a function called PIGetDocumentName but this only outputs the file name, not the full path.
    (Just to be sure: The file on which the tests run is already saved to disk, if that matters)
    Another fun part is: When I record an export step, what is the directory I am exporting into?

    Ok, after lots of reading the sdk sample outbound I've realized that or plugin is broken.
    When recording an action the outbound plugin stores the current path to gAliasHandle which is then recorded as a scripting parameter. Now when I execute the action I get the alias handle.
    However how is this supposed to work with an export plugin and batch processing with a "destination" set to a target? Is this even possible or do I need to double click the export step in the action and "reset" the location even if that causes the entire exporter to run again?

  • How to get the last sub folder value from the string in Webi report

    I have an object coming from universe, this object will contain string e.g. \\Users\Public\Pictures\Sample\
    or    \\Users\Doc\BI\BO\Webi\
    I need the last sub folder from this path to be displayed i.e. Sample and Webi.
    I would like to know how it can be done.
    I tried using formulas like POS, SubStr and Length. however the issue is that the length of the the sting is not fixed and the number of "\" are also not fixed.
    I would appreciate any help regarding this.
    Regards,
    Yogesh

    Hi,
    What is the formula you have written though?.
    =length(right([folderpath]);pos([folderpath];"\")+1)
    Thanks,
    Jothi

  • How to choose the right project settings?

    I'm new in taking video's and in editing them. I bought a Sanyo HD Xacti Video camera and made a lot of clips in my last holiday. The clips are transferred to my compter and have the format .MP4 1280-720 depth 1280 and 29,97 fps.
    I want to create after editing en DVD which I can show on my TV 16:9 (PAL-Netherlands)
    When I create a new project I have to choose the seetings and I really do not know how to choose!!
    What Project settings should I choose because in the settings I only see 30 fps under de NTSC systems. Is there some where a general explanation how to do?
    Help will be appreciated very much!!
    Greetings Willem

    Before the NTSC to PAL, I believe there are other major considerations.
    1. You are recording 720p30 1280 x 720 16:9 at 30 frames per second, using the MPEG-AVC/H.264 codec). That sounds to me like your are dealing with what they call "AVCHD-Lite". If so, there are major basic problems editing that in Premiere Elements 7. See Steve Grisetti's FAQ
    http://forums.adobe.com/thread/454585?tstart=0
    2. Your remarks would suggest that you want to create at DVD-VIDEO widescree (16:9) of your Timeline.
    3. So before all else, I would determine if you can successful bring your video into Premiere Elements 7 and export the DVD-VIDEO in the NTSC system before you think about converting an NTSC video to a PAL end product.
    4. Typically you select the project preset (new project dialog) to match the properties of your video. Once done that does not stop you from changing the export preset later. In the case of your NTSC 720p30 Sanyo video, I would suggest the project preset (new project dialog) = NTSC HDV HDV 720p30. Think of the project preset as a template from which you can edit your video. Although this 720p is a variant of AVCHD, I suggest the HDV category since there is no 720p preset under AVCHD. Note that the descriptions to the right of where you set the preset.
    5. In Share/Disc/Disc, in the Burn Dialog, then select the preset: NTSC_Widecreen_Dolby DVD. If that is all completed successfully then we can talk about conversion of NTSC 1280 x 720 16:9 to a PAL DVD-VIDEO (720 x 576 25 frames per second with a 16:9 flag to stretch the video on display after encoding).
    6. You may find the following link helpful:
    http://www.camcorderinfo.com/content/article_converting_ntsc_pal.htm
    ATR

  • Nokia 3110 c : How to transfer the Video Clip Fold...

    My handset model is Nokia 3110C. The memory of which is around 32~34 MB. I have installed Memory Card of 2GB. Currently, the Video Clip Folder can accommodate only 8 MB maximim. The Files dowmloaded can not save beyond 8 MB. But my SD can hold upto 50 MB.
    It will be wise to transfer the Video Clip Folder to SD to enhance memory space to 3110C.
    Can any learned user guide me  as to - how  to transfer present Video Clip folder or its contents FROM 'My Galler' Folder TO SD Folder ?
    Thanks     BASAB ROY. 18/9/2010

    Download the OVI Suite from..
    http://europe.nokia.com/support/download-software/nokia-ovi-suite/compatibility-and-download
    .. and install on your PC...
    Connect your Nokia E66 .. select the Envelope Icon in the OVI Suite and select Sync...
    When the process is over all the messages will be seen in the OVI Suite window...
    Now connect Nokia 6730c..
    In the middle window of the OVI Suite you will see 2 tabs ( 1. View Messages arranged by Date and 2.  View messages grouped by contacts).. Make sure that you select the first..
    Drag-and-Drop all messages with Downward Arrow Icon into INBOX in the bottom window ( where you see the Phone icon) and all the Messages with Upward arrow into SENT folders respectively..
    Hope this solves your problem..

  • How to choose the speakers Flash Player uses?

    How on earth do I choose the speakers which Flash Player uses?
    I downloaded the latest Flash Player, and it worked fine. Then I had a Skype conversation, and now Flash uses the same "speakers" which Skype uses ie a USB headset.Flash player can no longer see the computer's speakers.
    There seems to be absolutely no way in the web-based setup to tell Flash Player which sound output to choose. In Windows control panel (WIn XP SP3) the defaults for both sound and voice playback are set to the speakers (Realtek HD Audio) -  Windows media player plays correctly over the speakers.  If I right-click on an embedded video, I get a settings manager which lets me choose the microphone and camera Flash Player uses, but not the speakers.  And I can't choose the speakers  in the general sound controls of the Realtek HD audio, because those controls have no way of referring to any individual program. It is wierd!!!!
    I don't think there is anything cracked or broken - it was fine this morning, now not. How do I get sound coming out of the speakers again?
    Many thanks
    Andy
    Bristol, UK

    Flash Player:
    Adobe Reader:

  • How to set the password to folder

    Hi,
    iam using Windows98 operating system but we want set password to folder using java. if any possiblities? pls
    help me.

    netcom_ wrote:
    Hello, I have the same problem of you "set the password to folder" but I don't understand the solution from the discussion can you help me how can I get this solution.please I need this urgent.thank youDon't resurrect old threads. This thread is about 8 years old, I'm locking it.
    Kaj

  • How to find the mine craft folder

    How do i find my minecraft folder on my mac book pro i play minecraft and want to install some mods but i cant find my minecraft folder and its not in my application support folder plz help

    Hi,
    We provide a tutorial on this at http://youtu.be/fwArfZPZXBw which explains how to find it and then make sure you have quick access to it in the future.
    Best regards

  • How to choose the right processor speed for application

    Hi,
    Can any one help me to identify the right cRIO model.
    I want to choose the cRIO processor for an application. The cRIO- 9025, has processor of 800 MHz speed. Where as there is another cRIO model which comes with 400 MHz of the processor.
    How do I decide which model to choose?
    The mathematical calculations will help me to reach at a conclusion. I am not sure how to go ahead with the mathematical calculations.
    Can any one advise me on this.
    ThanX

    I don't think you will get any mathematical calculations telling you witch cRIO you have to use based on the level of information you have given.
    I don't think there are any mathematical calculations to decide witch cRIO a user can use. 
    You need to give a lot more information about what you are going to use cRIO for, before anyone can give you an advice.
    What does you setup look like ?
    Wwitch modules are going in the cRIO ?
    What are they doing ( input/output )?
    Are the cRIO interacting witch external systems?
    Are the cRIO only collecting data ? How fast ?
    What operation are the cRIO going to do ?
    Just a fewe of the questions you need to ask yourself. 

  • How to manage the host root folder?

    I'm using iWeb08, and I'm on system OSX 10.5.8.
    Last week I flawlessly transferred my site from Apple to another host.
    My question is, to make a few simple changes to it, {mostly text and links}, do I have to load up ALL the files again to the ftp host?  I don't know how to manage the root folder yet and I don't want to clutter the folder or cause the site to malfunction.
    Is there any useful posts on managing a hosting root folder??
    Problems or thing I should know using iWeb08?
    Thanks...  Ghary.com

    Once you get to know the file structure its possible to just upload the changed files by intelligent guesswork.
    You can also look at the date on the local published files but this would be rather time consuming.
    Most FTP apps have a synchronise feature to handle this for you but you need to set this up carefully and do a test run to make sure it doesn't wipe out essential files on the server.
    If you do a lot of updates and you want to get your web pages downloading faster, an optimizer will do all the thinking for you. These screenshots are of one of Ton Brand's Optimizers - HTML Optimizer Plus
    On the first pass all the files are optimized and uploaded...
    After that, Smart Handling is turned on and only the changed files are processed...
    The original folder is 10.1 MB and the Optimized one is 7.7 MB. That's without optimizing the PNG images. The finished site downloads fast. It needs to since its designed to work on mobile devices.

Maybe you are looking for