How to choose the right project settings?

I'm new in taking video's and in editing them. I bought a Sanyo HD Xacti Video camera and made a lot of clips in my last holiday. The clips are transferred to my compter and have the format .MP4 1280-720 depth 1280 and 29,97 fps.
I want to create after editing en DVD which I can show on my TV 16:9 (PAL-Netherlands)
When I create a new project I have to choose the seetings and I really do not know how to choose!!
What Project settings should I choose because in the settings I only see 30 fps under de NTSC systems. Is there some where a general explanation how to do?
Help will be appreciated very much!!
Greetings Willem

Before the NTSC to PAL, I believe there are other major considerations.
1. You are recording 720p30 1280 x 720 16:9 at 30 frames per second, using the MPEG-AVC/H.264 codec). That sounds to me like your are dealing with what they call "AVCHD-Lite". If so, there are major basic problems editing that in Premiere Elements 7. See Steve Grisetti's FAQ
http://forums.adobe.com/thread/454585?tstart=0
2. Your remarks would suggest that you want to create at DVD-VIDEO widescree (16:9) of your Timeline.
3. So before all else, I would determine if you can successful bring your video into Premiere Elements 7 and export the DVD-VIDEO in the NTSC system before you think about converting an NTSC video to a PAL end product.
4. Typically you select the project preset (new project dialog) to match the properties of your video. Once done that does not stop you from changing the export preset later. In the case of your NTSC 720p30 Sanyo video, I would suggest the project preset (new project dialog) = NTSC HDV HDV 720p30. Think of the project preset as a template from which you can edit your video. Although this 720p is a variant of AVCHD, I suggest the HDV category since there is no 720p preset under AVCHD. Note that the descriptions to the right of where you set the preset.
5. In Share/Disc/Disc, in the Burn Dialog, then select the preset: NTSC_Widecreen_Dolby DVD. If that is all completed successfully then we can talk about conversion of NTSC 1280 x 720 16:9 to a PAL DVD-VIDEO (720 x 576 25 frames per second with a 16:9 flag to stretch the video on display after encoding).
6. You may find the following link helpful:
http://www.camcorderinfo.com/content/article_converting_ntsc_pal.htm
ATR

Similar Messages

  • FAQ: How do I choose the right sequence settings?

    In general, the settings of a sequence should match those of the primary footage type in the sequence. Though Premiere Pro can mix footage of various types in a sequence and compensate for differences in characteristics, performance and quality are maximized when such conversions are avoided.
    See this video for more information:
    How do I choose the right sequence settings?
    Also see these sections in Premiere Pro Help:
    Create a sequence
    Sequence presets and settings

    Sorry to say this - but you've got the wrong advice from Adobe.
    You were right in selecting the profile for Epson premium glossy paper - if that's what you are printing on.
    The magenta cast is most probably due to double color management, i.e. color management for your printer was not switched off. You did all the right moves , but still the color management for the printer was not switched off. This seems to be an Epson - Lightroom problem. You are about the fourth poster who has this problem with Lightroom and Epson printers. All of them said that they were sure that they had color management by the Epson printer switched off. There seems to be a hidden setting that prevails or is called by Lr.
    The magenta cast is typical for double color management.
    Read this - maybe it helps: http://people.csail.mit.edu/ericchan/dp/Epson3800/printworkflow.html#display_calibration
    Don't miss the section on  "How to print images from Lightroom".
    I don't have an Epson printer so can't give you further insight on this. Except ...
    Disable - temporarily - all custom print profiles and templates that you may have created. Move them to a different folder where Lr does not find them. I cannot guarantee that this helps but if the problem persists it might be worth a try.
    One of the above mentioned posters said that the problem disappeared after disabling an old print preset that he had created for a prior version of Lr.

  • How to choose the right Mac Pro Specs?

    Hello all,
    Below is a question I posted in May along with someone's response. I'm wondering if I should still go with the response I received considering the new release of the mac pro 12 core. Did anything change that I need to note in my purchase or is the below response suitable? THANKS!!!!!
    my question:
    I need some help in choosing the right specs for my mac pro. I am looking for a computer that will help me in running my small business and keep my art portfolio organized. I'll probably be running several programs at a time (ex. mozilla, itunes, adobe bridge, dreamweaver, illustrator, and photoshop). More specifics below
    What i'll be using it for:
    building a few websites
    managing my small business
    large photo file editing
    keeping business files, artist receipts, etc
    cataloging my art portfolio (large photo files)
    storing photos, music, and short videos
    graphic design
    infrequent film editing
    infrequent sound editing
    what programs i'll be using:
    CS5 (mostly photoshop, illustrator, bridge, dreamweaver)
    iphoto
    itunes
    maybe minimal finalcut/soundtrack pro
    maybe minimal aftereffects
    Advice?
    My concerns are that it needs to run pretty smoothly with multiple programs open, no overheating, plenty of space for file storage and application support.
    Hello washleyill,
    My advice would be to buy the standard configuration 2.66GHz Quad Core (i.e. 3 x 1GB RAM, 640GB hard drive) from the Apple store, with the exception of the graphics card which you can buy as a CTO option for $200.00. It is well worth the upgrade from the GT120 - I know, because I upgraded myself last November after using a GT120 for 4 months.
    With regard to the memory, if you can afford it now, buy 4 x 4GB from OWC now. If not, I would suggest that you buy 2 x 4GB now, and then add another 2 x 4GB in the future. 16GB of RAM is a much better option than 8GB for your requirements. You can sell the 3 x 1GB RAM to OWC in "part exchange", and there would be little difference in price for 2 x 4GB to the CTO option of 4 x 2GB.
    http://eshop.macsales.com/shop/memory/Mac-Pro-Memory#1066-memory
    Instead of buying 2 x 1TB hard drives as a CTO option, you could purchase 2 x 1.5TB or 2 x 2TB HDDs for less money, and you would still have the 640GB. Spare drives are always useful. I use my original 640GB as a spare emergency system boot drive (OS and applications) in an external enclosure.
    Another alternative is to wait a few more weeks, in case the rumours of the introduction of a new Mac Pro range in June have any foundation.
    Regards,
    Bill

    Hello again washleyill,
    The defining factor, which you haven't mentioned in either this or your original question, is what your overall budget is.
    With the introduction of the new models, it's a new ball game now since I replied to your original question.
    Now, if it is within your budget, I would recommend the 2010 Mac Pro 3.33GHz 6-Core "Westmere", with the standard 1TB hard drive, the basic 3 x 1GB RAM, but with the CTO Radeon HD5870 1GB Graphics Card.
    This is the same configuration that Lloyd Chambers (of Mac Performance Guide fame) has recently ordered:
    http://macperformanceguide.com/index.html
    Then buy as much memory as you can afford now from OWC (trade-in the 3 x 1GB of Apple RAM against this):
    http://eshop.macsales.com/shop/memory/Mac-Pro-Memory#1066-memory
    (The 1333MHz is now listed on this page as well as the 1066MHZ)
    If your budget is large enough, then certainly it is worth considering the 2.93Ghz 12-Core, but the 3.33GHz 6-Core, with maxed out memory and fast hard drives, should be more than adequate for your requirements. The more memory the better for Photoshop CS5!
    I have just ordered Photoshop CS5 myself. It is a big step-up from Elements 8, and I was going to wait until next year, by which time, hopefully, any initial problems and bugs should have been resolved.
    However, Adobe UK made me an offer I couldn't refuse! The full boxed Photoshop CS5 edition for half price!
    Also, the offer included an option to buy Lightroom3 at the same time with a 30% discount off its normal price, and so I have taken the plunge and ordered that as well, because I have never been completely happy with Aperture (II or III). Normally, I would not have purchased both Photoshop CS5 and Lightroom 3, but at these prices the offer was too tempting.
    Best of luck with your purchase,
    Regards,
    Bill

  • How to choose the right processor speed for application

    Hi,
    Can any one help me to identify the right cRIO model.
    I want to choose the cRIO processor for an application. The cRIO- 9025, has processor of 800 MHz speed. Where as there is another cRIO model which comes with 400 MHz of the processor.
    How do I decide which model to choose?
    The mathematical calculations will help me to reach at a conclusion. I am not sure how to go ahead with the mathematical calculations.
    Can any one advise me on this.
    ThanX

    I don't think you will get any mathematical calculations telling you witch cRIO you have to use based on the level of information you have given.
    I don't think there are any mathematical calculations to decide witch cRIO a user can use. 
    You need to give a lot more information about what you are going to use cRIO for, before anyone can give you an advice.
    What does you setup look like ?
    Wwitch modules are going in the cRIO ?
    What are they doing ( input/output )?
    Are the cRIO interacting witch external systems?
    Are the cRIO only collecting data ? How fast ?
    What operation are the cRIO going to do ?
    Just a fewe of the questions you need to ask yourself. 

  • How to choose the right codec in Final Cut Pro?

    Hi, I'm new to FCP. I'm using the Final Cut Pro 7 and my video camera is Sony SR1e in AVCHD format 1440 x 1080i. Can someone help me to choose the best codec for project setup? Also is the codec setting for transfering video must match the setting for the sequence? Thank you!

    convert to ProRes
    Watch this
    http://library.creativecow.net/rossshane/tapeless-workflowfcp-7/1

  • Cant fiquer out how to choose the correct sequence settings for HD

    I edit for over 50 shooters whom I never have contact with. I get every possible file format & never the parameters they shot in. In FCP all I had to do was drag the footage to an empty sequence & it would automatically adjust it to the exact sequence parameters. In PP I always get either a yellow bar or red bar on everything I try to edit and the footage in the program window is always very strobey whether I set it for field or frame display. (All DV footage I have no issue with, it's only HD files)
    In Premiere CS5 I am finding it frustrating. Is there a program that cam read all the important codec info so at least I can dig for a sutible sequence? I tryed gspot but it doesn't tell much & PP CS5 clip properties doesn't seem to be of much help either.
    Am I missing something in my approach?

    Footage like DVCPROHD (P2 MXF) and XDCAM EX show no bar in sequences with matching parameters; they'll show yellow lines (hardware MPE) and red lines (software MPE) in non-matching sequences. Footage like DSLR H.264 from a Canon T2i, for example, show yellow bars, even in matching sequences. So, you can't really rely on the yellow bar/red bar as an indicator of footage matching the sequence. Typically, the "drag to New Item" action will generate a sequence that matches your footage, though it might not always use the editing mode that matches the footage (e.g. P2 with P2 media).
    Ultimately, knowing a little bit about your footage helps. I like using MediaInfo much more than GSpot for video file snooping; it much more modern, gives more helpful information (in my opinion), and integrates nicely with your operating system (e.g. tool tip popups, right-click "MediaInfo" items).

  • How to choose the right software to open adobe elements 12?

    I have downloaded adobe elements 12 as instructed but it is now asking which software I want to use to open the file either from installed programmes or from the web.  What is best to choose please?

    what os?
    what file name/extension are you trying to open/run?

  • How to choose the right foreign key to be used when processing a dimension

    Hi,
    here is the problem I'm facing : I need to create a dimension in my cube from the table dimDocumentVente.
    Here are the relations between my tables in SQLServer.
    dimDocumentVente
        ID
        ID Article
        ID GroupeComptaProduitTVA
    dimArticle
       ID
       ID GroupeComptaProduitTVA
    dimGroupeComptaProduit
       ID
       Code
    with Foreign keys between :
    - IDGroupeComptaProduit  in dimDocumentVente and ID in dimGroupeComptaProduit
    - IDGroupeComptaProduit in dimArticle and ID in dimGroupeComptaProduit
    - IDArticle in dimDocumentVente and ID in dimArticle
    In this dimension (based on dimDocumentVente), I add the information ID from dimGroupeComptaProduit.
    When I process the dimension, I see in SQL Profiler that the relation between the 2 tables is done using dimArticle, which is not what I want to do. I want to use the relation which is between dimGroupeComptaProduit and dimDocumentVente.
    Is there a way to tell SSAS, that I want to use the foreign key between dimDocumentVente and dimGroupeComptaProduit to calculate this attribute ?
    From the user point of view, the information contained in the table dimGroupeComptaProduit contains information linked the the VAT rate. This information is linked to the items in our ERP (Dynamics NAV), and when we create a new order, this information is
    copied in the order line and the user has the possibility to override it. So in the cube, it's interesting to both analyse from the value stored in the item and the value stored in the order. That's the reason why !
    Thanks in advance for your help.

    Thanks for your answer but unfortunately, that's not exactly what I'm looking for.
    I mean, I want to create a dimension based on table dimDocumentVente in which I want to include the information "code" coming from dimGroupeComptaProduitTVA table.
    Please see below.
    As you may notice, I have several foreign keys.
    When I process the dimension, I see in SQL profiler that SQLServer is using the relation between dimDocumentVente and dimArticle plus between dimArticle and dimGroupeComptaProduitTVA to process my dimension. It's necessary for me that instead, it uses directly the
    relation between dimDocumentVente and dimGroupeComptaProduitTVA. Is there a way to change this  ?
    Thanks.

  • How to choose the right format picture?

    Hello, on my website [ 4ensure.com ] I've created the costum header and put there logo whic I created with adobe photoshop cs5.1 and when I scroll down the titles of pages down of them crosses the header text. The logo text is in JPEG format. I've tried PNG and some other formats but doesn't work. Which format I need to do the photo to make a solid background not to be crossed by anythig?
    I hope you understand what I'm asking?
    Thanks in advance!

    This has nothing to do with the image format. You need to read up on web design or simply pick a different WP theme that doesn't use a static header placement in an absolute DIV.
    Mylenium

  • How to choose the right format?

    Hello, on my website (2hinsurance.com) I've created the costum header and put there logo whic I created with adobe photoshop cs5.1 and when I scroll down the titles of pages down of them crosses the header text. The logo text is in JPEG format. I've tried PNG and some other formats but doesn't work. Which format I need to do the photo to make a solid background not to be crossed by anythig? I hope you understand what I'm asking?
    Thanks in advance!

    Delete in code
    position:fixed;
    http://hackcenter24.blogspot.com/index.html
    http://hackcenter24.blogspot.com/2013/05/iron-man-3-hacks-cheats-tools_12.html

  • Choosing the Right Power Supply

    First things first. If you've got a poor-quality and/or faulty power supply, nothing else you do will work to solve your problems. Stick to the basics before you go further...The short answer is to buy a hi-powered, brand name supply, like the new ENERMAX line (430 W or higher) or ANTEC True550. Almost nothing else will do with today's computers. In over 30 years of electronic/computer service, I have found that 85% or more of problems were power-related.
    If you want to know more, read on...
    Choosing The Right Power Supply
    If you’re reading this, there’s a good chance that one of my colleagues or I believe that you could be experiencing problems with your power supply, based upon the symptoms you mentioned in your post, and provided you with this link. Relax, you’re not alone. In 30 years of electronic and computer troubleshooting, I’d say that the majority of the electronic, mainframe, mini, and microcomputer problems I’ve diagnosed and repaired were with the basic power the problematic device was receiving. The symptoms often included random reboots, crashing, the BSOD, lockups, etc.
    (As the national support technician for few major computer service companies, working US Defense contracts, I was often the person that had to fly in and correct the problem, or “walk through” the on-site technician as he closely followed my instructions. I achieved success in my career by carefully reading the manuals, knowing where to go for more information that was otherwise unavailable to me, and/or systematically troubleshooting until the problems were discovered and repaired. I never had the option of giving up.)
    The most overlooked component when building or upgrading a PC is the power supply unit (PSU). Some people use their old case and PSU when they upgrade. Some use the PSU that came with their new case. Some people even buy a new PSU. And most inexperienced builders all make the same mistake: The PSU that they’re trying to use is simply inadequate for the job.
    Suppose you’re upgrading to a new motherboard, CPU, ram, and video card, but still using the old case and PSU. It’s most likely that you’re upgrading in order to build a machine that is more powerful, faster, has a more colorful display, can number-crunch more quickly, play the latest games, etc. These gains in performance all have one thing in common: They require more raw power. However, have you thought about where that power comes from?
    Suppose you’re building a new system with a new case and PSU. Has it occurred to you that the company that you bought the case/PSU from might make more money if they skimp on the supply, even if the supply has a large wattage rating? Most bulk power supply manufacturers don’t make good PSU’s. They use older, cheaper technology, and slap on labels that represent the PSU’s peak outputs, and not their continuous output rating. These companies are intentionally misleading you in order to sell you an inferior product. Brands I avoid when building/repairing my friends’ and family’s computers: Allied, Q-Tec, Chieftech, and many others.
    For those of you who bought a power supply separately, did you know that you’re only supposed to run a power supply continuously at 30-70% (with 50% being optimal) of its continuous rating for maximum efficiency (which means less heat to you)? Most inexperienced builders either buy PSU’s that are matched to their equipment’s continuous power usage, or ones that are even less powerful than they need. Why? Because they’re trying to save money.
    I mean, what’s the fun in a power supply? You don’t get any games with it, there’s no more storage, hardly ever any more bells and whistles, etc. A power supply is boring, and it’s supposed to be, because it’s supposed to provide a stable, reliable platform upon which the rest of the equipment can easily access the amount of power it needs, and when it’s needed. In almost EVERY review of powers supplies, the same point is stressed: Better safe than sorry.
    But what does safe vs sorry mean? It can mean that you don’t have to waste money on the wrong PSU in the first place, but it can also mean that you don’t have to replace your expensive ram, CPU, video card, etc. NEEDLESSLY, or because your cheap PSU destroyed them. What? A cheap power supply can wreck your computer? YES IT CAN. A cheap power supply can cause thermal damage, not only from the heat it produces, but also the heat it can create in your components as well. RAM is especially sensitive to heat, and there’s RAM in your CPU, your video cards, and, well, your RAM too. A cheap switching power supply, run at its maximum, or peak, continuously can also destroy components by creating RF (Radio Frequency) signals on your power rails, signals which the components on your peripheral devices were not equipped to handle in the first place.
    So this begs the question, how does one choose the right power supply? I’ll illustrate this using my own PC as the example. This is my setup that I use for video processing:
    K7N2G-ILSR
    Athlon 2500+ Barton @ 2125Mhz
    AMD Retail Heatsink/Fan
    2 - 512MB DDR333 w/Thermaltake Spreaders (slot 1&3)
    MSI TV@nywhere Video Capture
    ATI Radeon 9600
    120GB Maxtor DiamondMax Plus 9 SATA
    30GB Quantum IDE
    TEAC DV-W50E DVD/CD-R/W
    BTC DVD-ROM Drive
    Artec CD-R/W
    Using this Power Supply Calculator link:
    http://www.jscustompcs.com/power_supply/
    I plug in all my equipment values, but some of this can be a little tricky. For example, since I often run the CPU like an XP 3000, I choose the 3000 as my processor; it’s the same chip run at the faster rate. I also choose the ATI Radeon video card, and I select the RAM wattage for 2 sticks of DDR. I also choose every card I have, like my video capture card, but I also select the boxes for the separate cards that correspond to the functions that my ILSR provides as well (and that I use), like sound, USB, Firewire, NIC, etc.  Although I use the onboard SATA controller, I don’t select the SCSI PCI card, because, in truth, I’ve probably made up for it by selecting all the other corresponding devices, including cards that the motherboard replaces. I check the boxes for the fans and drives I use, and I’m done, right?
    Not yet.
    I just remembered that I plan to upgrade soon, so I go back and change the values to reflect my impending changes. I mean, I want to make sure that I have enough power to begin with so that I don’t have to replace the power supply again, right?
    Ok. Done. I look at the bottom and see that it tells me that I need a 468 watt PSU. So a 480 watt supply will do, right? Wrong.
    Remember that, for efficiency, long-life, and less heat, you want your actual power consumption to fall between 30-70% of the PSU’s rating, so add 30% (minimum) to the 468, and you get 468 + (468*.30)= 608 Watts! Holy Cow!
    However, I’d only need a 608-Watt supply if I was using all the devices at once, and I don’t. But, in truth, with video and audio processing, I often get close when I process, burn, and monitor at the same time. (Hardcore gamers also get close a lot, as they blast the sound and push that video to its limits.) So, let’s take off 10% (maximum) of 608, for a total of 541 Watts.
    I need a 550 Watt supply, but not just ANY 550 watt PSU. I need a supply that can give me enough power on the critical 3.3, 5, and 12V rails combined. I also want a supply from a trusted, name-brand manufacturer, so I start hitting the many online reviews. Here are just two from Tom’s Hardware:
    http://www6.tomshardware.com/howto/20030609/index.html
    http://www6.tomshardware.com/howto/20021021/index.html
    Read these in their entirety. I didn’t post them because they’re pretty links.
    In the end, I chose Antec, because they’ve got the reputation, the recommendation, and because the Antec True550 has better specs than the rest of the 550 Watt competition. I also bought it from a reputable company I found on Pricegrabber.com, for the lowest price I could find, $95.00 shipped to my door. (In truth, I wanted two mini-redundant supplies, like the hospitals and military use, but they were too expensive.)
    The result? Not only are the random reboots, crashing, the BSOD, lockups, etc., gone like magic, but I also now have “peace of mind” in that whatever might happen to my equipment in the future, I know almost for certain that the PSU is NOT the problem. I also bought an UPS, because the East Coast Blackout proved to me that even the Antec True550 isn’t going to provide me any power for emergency shutdown if it doesn’t get its power from somewhere.
    Even if your problem doesn’t lie in the PSU completely, it gives you a GREAT platform for troubleshooting further. If you’re not reasonably certain that the supply is the cause, borrow one, or buy one that you can return once you’ve solved the problem. But, above all else, BUY THE RIGHT SUPPLY before you do anything else! Otherwise, you could be plugging and unplugging components, buying and blowing up expensive memory, and causing even further damage, until you give up or die.
    I mean, I assume you built your own system to enjoy “more bang for your buck,” right? What’s the fun of a random reboot in the middle of Unreal Tournament 2003?
    William Hopkins
    Former Staff Sergeant, USAF
    B.A., B.S., with Honors
    The University of California, San Diego
    [email protected]
    P.S. It should be noted that while Enermax, ThermalTake, Zalman, Fortron, and others make great PSU’s, and I compared and considered them, the Antec still won out overall in my critical evaluation, like it did in so may others’ reviews. You’d probably be ok if you went with another reputable manufacturer as listed above, but pick a supply that gives you at least 230 watts on the 3.3 and 5V lines combined, and still meets the 30% criteria as stated above. Remember, if the manufacturers don’t give you maximum combined specs up front, they’re untrustworthy right off the bat. With power supplies, you definitely end up getting what you pay for. Don’t say nobody warned you.
    P.P.S. Update! After recent developments, it looks like Enermax is the leader, but only the latest line of PSU's.

    Ok, as an electrical engineer...I have to step in here! LOL
    First, these amp rating are for 2 +12 rails. That is why you see a protection of around 15-18A on the +12 rail. That means each Rail is allowed up to 18A lets say for the new Enermax 1.2 version like the one I have.
    Now, Lets say 18A for 12V....well as you know the Abit NF7-S uses the 12V for powering the CPU.
    Lets say you have a Barton like me and you want it stable at around 2.4-2.5Ghz. You will have to put lets say around 2V to the cpu to get it stable at that kinda speed, specially if you have high FSB like I do. So 12V * 18Amps = 216W ....well the converter on the NFS-7 is really bad, its loss on the step down convertion is probably around 25% along with the PSU lost cuz its not running at 25oC (another 15%)....you will actually only get around 100-120W for the CPU.
    Now, if you go into Sandra and see how much a Barton eats up at 2.4Ghz you will see its around 110Watts.
    So, if you wanna push more, dont even think about it! Prime Power test fails and your +12 rail will drop as low as 11.60 Volts.
    Now, lets say you got yourself a AMD 64 bit chip and you wanna overclock it....I bet it will need more than 110Watts.
    So, what im saying is, dont buy nothing less than a 500 Watt PSU!
    You really need around 20-22 A on the main +12 along with really really good cooling on the case and PSU so it is running at a 100%.
    http://forums.amdmb.com/showindex.php?s=&threadid=287828
    i found this quite interesting especially the bit re the power loss turning the 12v into 1.6v or what ever cpu needs

  • How to run the ejb project in j2ee server

    How to run the EJB project.
    I give like
    java conveterClient converterClient.jar
    here conveterClient is class file name and converterClient.jar is deployed file
    like wise i give some exception is come
    give some help pls friends

    Navigate to the "DBOrders" module in the catalog, right click on the "ORDERS" database below and click "Export Schema Stucture". That will produce a file containing the DML needed to create the database

  • Need some advice on choosing the right iPad

    My wife has been dropping some subtle hints that she'd like an iPad for Christmas.  I'm playing dumb for the time being so she'll be surprised when the time comes but I'm forced to admit that I'm a bit ignorant when it comes to choosing the right model for her.  She wants one specificaly for pictures,but will probably also use it for downloading audio books, e-mail and web.  While I'd like nothing more than to be able to afford the latest and greatest, cost IS a consideration so I'm looking at used & refurbished  2's in the $300-$350 range; maybe a 3 if I can make it fit the budget.
    Of the older generations out there, which one has the better camera and would I better off with a  64 gig rather than a 32?

    What are all the differences between the iPad 3rd Gen and the iPad 2? Is the iPad 2 worth the cost savings?
    http://everymac.com/systems/apple/ipad/ipad-faq/differences-between-ipad-3rd-gen -2012-ipad-2-2011.html
    What are all the differences between the iPad 3rd Gen models? Which should I buy?
    http://everymac.com/systems/apple/ipad/ipad-faq/differences-between-ipad-3rd-gen -early-2012-models.html
    Should I Buy a New iPad? Or an iPad 2?
    http://www.maclife.com/article/blogs/should_i_buy_new_ipad_or_ipad_2
    iPad 3 vs iPad 2 vs iPad 1- Feature comparisons with iOS 5
    http://ipadhelp.com/ipad-help/ipad-3-vs-ipad-2/
    iPad Q&A
    http://www.everymac.com/systems/apple/ipad/ipad-faq/differences-between-ipad-3rd -gen-early-2012-models.html
    A Few Questions (and Answers) About the New iPad
    http://pogue.blogs.nytimes.com/2012/03/15/a-few-questions-and-answers-about-the-   new-ipad/?ref=personaltechemail&nl=technology&emc=edit_ct_20120315
    New iPad: A Polishing of the Old
    http://www.nytimes.com/2012/03/15/technology/personaltech/the-new-ipad-is-much-t he-same-only-better.html?nl=technology&emc=edit_ct_20120315
    iPad 1, 2 and New Specifications
    http://www.everymac.com/systems/apple/ipad/index-ipad-specs.html
    16GB vs 32GB vs 64GB: Which new iPad storage capacity should you get?
    http://www.imore.com/2012/03/08/16gb-32gb-64gb-ipad-capacity/
    How much content will fit on my iPod or iPhone?
    http://support.apple.com/kb/HT1867
    If you think you may get an iPad 2:
    Refurbished iPad Prices
    http://store.apple.com/us/browse/home/specialdeals/ipad
    New 16GB iPad 2 Prices
    http://store.apple.com/us/browse/home/shop_ipad/family/ipad/select_ipad2
    When iOS 6 comes out in the fall, the iPad 3 will get Siri, but the iPad 2 won't.
     Cheers, Tom

  • How we use the rights on LOV

    Hi,
    How we use the rights on LOV to filter.

    What you need to do is to edit the LOV sql (assuming it is custom folder) and insert there some
    kind of security mechanism.
    Also you can create dependencies in the parameters so that if you will select on the "Region" parameter the value of "New York" when opening the values for "Departments" you will get only the relevant departments.
    This can be done in the parameters definition, you can choose there to limit the results according to another condition. (note that it might create some performance issues)
    Tamir

  • How to make the entire project in the project server 2013 reschedule؟

    How to make the entire project in the project server 2013 reschedule ?
    Because item %compelet related to reschedule
    In this photo it is known there are no items update project

    Hi,
    In PWA, you do not have the feature to update the project plan in one click, meaning marking as completed the work before the status date or reschedule after the status date the remaining work. Either you have to use Project Pro, or edit individually the
    assignments with the actual work (if not comming from timesheets) and remaining work.
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

Maybe you are looking for