How to classify new and old user account from idm system using SPML

hi all,
i can use SPML code to create new user on IDM system but, i can't classifying new or old user account
any advise ? very thank you in advanced.
athikom.

Hi Vikram,
Iam not sure though, did you chekced EXIT_SAPMM06E_022 if it helps you in anyway.
Regards,
Swarna Munukoti

Similar Messages

How do I delete the old user accounts from my Mac?

I have a few accounts in my name on my mac which are the accounts I had on previous hard drives before upgrading them. When I upgraded I used Time Machine and it always asked to set/create a new name and account.
My question is, how do I delete the old accounts?
Not sure if the accounts are taking up space but I am about to upgrade to a SSD and would like everything as tidy as possible.
Thanks
Phil

Delete them in the Accounts pane of System Preferences.
(56458)

How do I delete an old email account from my system

I was asked to update a password to our company email account and I updated. Then I had to update the password on my iphone. Now my iphone won't send any emails out because it is asking for an update to an email account that was never associated with this iphone (the email account was from a former employer). It must have been restored or synced to my iphone or tied to iTunes through syncing. I deleted the old employer phone from itunes when I left the job and purchased a new iphone.
But now my new iphone is not sending emails because it says that the old email account does not recognize the new password. And there is no old email account to delete. I've looked in my itunes acccount to try to delete there as well and can find nothing to delete from the old account.
Message was edited by: ggslavik

Very interesting, thank you for the update.
I would next reset the network settings on the phone, in case there is some info there that is stuck and causing the issue:
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
I would also check these locations to see if the account is signed in anywhere else as an Apple ID in your Settings:
iCloud
iTunes & App Stores
Messages
FaceTime
Game Center
If not I would as a last resort, backup your iPhone with this article:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
And restore it from your backup with this article and test the issue:
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/ht1414
If the issue persists when restored, then restore it as a new device and test the issue to help isolate the data in the backup.

How do I make my old user account perform like the new one?

I have a macbook pro 13" 2008 with 8 gb of ram that has been showing stuttering in hd video lately (or maybe when i upgraded to lion). I created another user and it doesn't seem to suffer any stuttering. Perhaps it doesn't have weird things running the background like the 655mb kernal task I see in activity monitor. My question is, how do I make my old user account perform like the new one? I've tried to turn off things running the background, but it doesn't seem to do anything. Thanks!

How to Transfer Everything from an Old iPad to New iPad
http://osxdaily.com/2012/03/16/transfer-old-ipad-to-new-ipad/
http://ipad.about.com/od/iPad_Guide/ss/How-To-Wipe-Your-iPad-And-Erase-Data.htm
 Cheers, Tom

How do i delete an old iCloud account from phone when I forget my password and I'm not able to reset it because my security questions do not match?! Help!! Currently not able to update any apps or icloud info

How do i delete an old iCloud account from phone when I forget my password and I'm not able to reset it because my security questions do not match?! Help!! Currently not able to update any apps or icloud info...

If your device is signed into an old ID of yours that is an earlier version of the ID you want to sign in with, do the following:
If you are using iMessage and FaceTime, make sure you are signed into these services with your current ID. If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.) Now go to Settings>iCloud, turn off Find My iDevice and enter your current password when prompted (even though it prompts you for the password for your old ID). Then save any photo stream photos that you wish to keep to your camera roll (unless you are using iCloud Photo Library). When finished go to Settings>iCloud, tap Sign Out (or Delete Account if you are not running iOS 8) and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device).

How do I remove an old itunes account from my iphone

How do I remove an old itunes account from my iphone?

What do you mean by removing the account?
An account is just a user neame and password with which you purchase content.
You can go to settings and sign out of the account nd inot another. This is covered in the manual.

HT204053 how can i delete my old icloud account from my iphone

how can i delete my old icloud account from my iphone

Go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

How can I retrieve my old user account?

Hi,
I migrated my old iMac to my new 27" iMac and did it wirelessly via the internet and it took ages. Apple support told me to do it this way because my old iMac is 400 Firewire and my new one only has 800 Firewire and I only had a 400 Firewire cord.
I was told to choose the no I don't want to migrate when I went through registering my computer. I then got it set up with internet and then went into Migration Assistant. I told the woman I spoke too that it was going to create a problem with my old user account and she said I could just delete it.
Here is my dilemma. My old user account is called Pink Tuley (which has all my information, documents etc. on it), I created a new account called Tuley and you guessed it it's a shell with nothing there. All my stuff in on Pink Tuley and when I go to MacintoshHD users and locate my Pink Tuley folder there are a bunch of folders that I can't open (they have that red circle with a white bar in the middle of them). How do I make Pink Tuley my main account or get all the Pink Tuley stuff onto my new Tuley account? I hope there is a way to figure this out.

Niel,
Thanks that was easy. Now can I go and delete the new user account I created when I first registered this computer? I have a few user accounts from my old machine I don't use, can I delete those also or is it best to leave them alone?
Message was edited by: spiralgirl

How do i delete the old users account on my second hand imac g5 without the origonal disc

im new to imacs and not sure how to delete the old users account without the origonal disc

First of all, you need to make sure your current user account (the one you intend to keep) is an administrator account (not standard).
Go to System Preferences Accounts pane. Click the lock, if it's locked, and enter your authorization, to unlock.
In the sidebar, you will see the list of user accounts. To delete a user account, select it on the list and click the minus sign.

Trigger how to get new and old value for nested table column?

Hi,
I have created a nested table based on the following details:
CREATE TYPE typ_item AS OBJECT --create object
(prodid NUMBER(5),
price NUMBER(7,2) )
CREATE TYPE typ_item_nst -- define nested table type
AS TABLE OF typ_item
CREATE TABLE pOrder ( -- create database table
ordid NUMBER(5),
supplier NUMBER(5),
requester NUMBER(4),
ordered DATE,
items typ_item_nst)
NESTED TABLE items STORE AS item_stor_tab
INSERT INTO pOrder
VALUES (800, 80, 8000, sysdate,
typ_item_nst (typ_item (88, 888)));
Now I would like to create a trigger on table pOrder for after insert or update or delete
and I would like to track the new and old value for the columns inside nested table.
Can anybody direct me how to do it?
I would like to know the sytax for it like:
declare
x number;
begin
x := :new.nestedtablecolumn;--how to get the new and old value from nested table columns
end;
Hope my question is clear.
Thanks,
Lavan

Hi,
Try like this:
CREATE OR REPLACE TRIGGER PORDER_I
BEFORE INSERT
ON PORDER
REFERENCING OLD AS old NEW AS new
FOR EACH ROW
DECLARE
items_new typ_item_nst;
ordid_NEW NUMBER;
BEGIN
FOR i IN :new.items.FIRST .. :new.items.LAST LOOP -- For first to last element
DBMS_OUTPUT.PUT_LINE(':new.items(' || I || ').prodid: ' || :new.items(I).prodid );
DBMS_OUTPUT.PUT_LINE(':new.items(' || I || ').price: ' || :new.items(I).price );
END LOOP;
END;Regards,
Peter

Diff in new and old gl accounts

diff in new and old gl accounts

Dear Pranav,
ECC 6.0 New GL Functionality
1.Activate the New General Ledger Accounting by a single click on the clock icon
2.You will reach to change view "activation of New GL A/cg" detail screen and tick the checkbox and save.
3. After activation of New General Ledger Accounting, you exit the IMG screen When you re-enter , you find that a new node is added Financial Accounting (New)
4.After activation of New General Ledger Accounting , a new sub node appears in the IMG structure.
This sub node is Define Segment
The menu path is:
SAP Customizing IMG ---> Enterprise Structure -
> Definition --> Financial Accounting --> Define Segment
In this IMG activity, you define your segments.
If you then define your profit centers, you can enter an associated segment in the master record of a profit center. The segment is then derived from the assigned profit center during posting.
5.Activation has created a new field in Profit Center Master Record : the SEGMENT
6.Leading and Non- Leading Ledgers
In General Ledger Accounting , you can use several Ledgers in parallel. This allows you to produce financial statements according to different accounting principles. A ledger uses several dimensions from the totals table it is based upon. When defining Ledgers , one must be defined as the Leading Ledger . The Leading Ledger is based on the same accounting principles as that of the consolidated financial statements. It is integrated with all subsidiary ledgers and is updated in all company codes. This means that it is automatically assigned to all company codes. In each company code, the Leading Ledger receives exactly the same settings that apply to that company code : the currencies, the fiscal year variant and posting period variant .
You must designate one of your ledgers as the Leading Ledger. It is not possible to designate more than one ledger as the leading ledger.
The menu path is :
SAP Customizing IMG -
> Financial Accounting ( New ) -
> Financial Accounting Basic Settings (New) -
> Ledgers -
> Ledger -
> Define Ledgers for General Ledger Accounting
Clicking on the checkbox identifies one of your ledgers as the Leading Ledger.
7. Activation of Non Leading Ledgers
Non Leading Ledgers are parallel ledgers to the Leading Ledger . They can be based on local accounting principle, for example. You have to activate a non- Leading Ledger for individual company codes. Non- Leading Ledgers can have different fiscal year variants and posting period variants per company code to the Leading Ledger of this company code.
The menu path is :
SAP Customizing IMG -
> Financial Accounting ( New ) -
> Financial Accounting Basic Settings (New) -
> Ledgers -
> Ledger -
> Define and Activate Non --Leading Ledgers
8.Assign scenarios to ledgers
A Scenario combines Customizing settings from different business views. Each business view specifies which posting data is transferred from different application components in General Ledger Accounting, such as cost Center update or ProfitCenter update .You assign the desired scenarios to your ledgers. For each ledger, you define which fields are filled with posting data from other application components.
SAP delivers a number of scenarios in the standard system. It is not possible to create additional scenarios.
The menu path is:
SAP Customizing IMG -
> Financial Accounting ( New ) -
> Financial Accounting Basic Settings (New) -
> Ledgers -
>Fields -
> Display Scenarios for General Ledger Accounting.
9. Cost of sales accounting
Cost of sales accounting is a way to create a profit and loss statement (P&L) for a company by comparing the revenues to the costs or expenses incurred to obtain these revenues.
The expenses are mainly divided by functional area such as:
Manufacturing
Administration
Sales
Research and Development
We can activate Cost of Sales Accounting by the following menu path :
SAP Customizing IMG -
> Financial Accounting ( New ) -
> Financial Accounting Basic Settings (New) -
> Ledgers ->Ledger---> Activate Cost of Sales Accounting
Regards,
Naveen.

Can't delete old user accounts from iBook (G3 - Darwin 6.8)

Hello,
I'm having a pain of a time trying to remove the old user accounts on this iBook I was given. The accounts page in the system settings is unlocked, I click on an accountm, the click on Delete User, it works for a while, and then when it is finished 'deleting' the user account is still there, nothing has been deleted. I've try a dozen times now. I'm stumped. Can't find anything on the internet that will help.
Thanks,
David.

So far, I've not had this kind of issue; but did find a few directions to check to see how to go about removing user accounts... or renaming them, etc. One of the recent discussions I've read through (three pages) had some ideas that could work.
Outside of booting the OS X computer into a super-user account where you can delete Admin users, etc and probably if not familiar with unix, do some incredible damages too; I'd try other exercises first as I am timid. What version of OS X is running in your vintage computer?
In the process of 'Change Name on Home Folder' some revealing ideas came across; some may transfer...
https://discussions.apple.com/thread/3366855?tstart=0
And some ideas that could be used to another end, may be found here...
http://www.cultofmac.com/126621/how-to-move-or-rename-your-mac-home-folder-macrx /
How to delete user accounts...
https://discussions.apple.com/message/3836878#3836878
However, there are no warrantees expressed or implied. Always a fine idea to read and sort information since some of the ideas available only allow you do perform the practice once correctly. Or wish you had.
Good luck & happy computing!

How do I delete an old email account from my iPhone that keeps popping up?

How do I delete an old email account that keeps popping up on my phone?

Hello Willon63,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Delete the affected email account from your device.
Tap Settings > Mail, Contacts, Calendars.
Choose the affected email account, then tap Delete Account.
Add your account again.
Have a nice day,
Mario

How do you delete a guest user account from the users&groups pane?

could anyone help with giving a tip on how to delete a guest user account from the users&groups pane in os-x 10.7 ? when I unlock account the delete or minus button is inactive. Thankyou

aha, by disabling the find my mac checkbox in icloud seems to work. tusen takk previous threaders!!!!!!!!!!

How to get new and old value in an alert?

Hi,
I created one event alert in Oracle Apps on PER_ALL_PEOPLE_F table.My intention is to execute the concurrent program attached to the alert when the user changes last_name fileld of that table.How can i get the :new.last_name and :old.last_name in alert.
Please give valuable solution to this question
Thanks in Advance
Manoj M

As I aware of there is not concept of :old vs :new in alert. since you change last_name which mean it is an update instead of correction then you can get the new effective start_date and do minus - 1 to get the previouse record effective end_date and using that you can get the old last name.

How to classify new and old user account from idm system using SPML

Similar Messages

Maybe you are looking for