How to clean from dust Hp Pavilion 23-f200eg

Hi all i have a HP Pavilion TouchSmart 23-f200eg All-in-One Desktop Pc , I got it one year ago am very happy with it
But since above a month ago it's making a noise , i check and it have dust inside because i never clean it before inside (just the display)
I want to know how to clean from dust properly , because i have a little afraid from any damage
Should i remove cooler and cpu to clean ? , what tools or stuffs are good from cleaning inside this pc model ?
Thanks a lot.

Hi rcstipe,
Welcome to the HP forums!
I see you have a Photosmart B209a and are wanting to know how to clean the printhead via the software on Windows 8. I will definitely do my best to assist you with this.
There is full feature software for your printer for Windows 8, so as you would have with the few previous versions of Windows, it's done through the HP Solution Center. If you don't have the HP software installed yet, please download and run the HP Printer Install Wizard to get the software installed.
If you're not sure where to locate the clean printhead function once the software is installed, please have a look at Step four: Clean the printhead under Solution six: Print and evaluate a print quality diagnostic report and troubleshoot defects in this Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems document to see where to locate it.
Hope to hear back from you soon!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Similar Messages

How to clean the dust at charging case

Hi all,
how to clean the dust at charging case rubber....
Cause i have no idea to clean it...
>.<

you can clean it do you have some stickers then remove it and apply to that dust area next again remove it u can clean it like that or use screen cleaning cloths
Do not forget to give kudosand to select the correct answer

How to clean the dust inside the screen of the iPod Touch?

Hi everybody,
lately some dust entered inside the screen of my iPod Touch.
At first it looked like one or two pixels were gone bad, but it is just some annoying dust.
The problem is that I cannot figure out any way to remove it.
I tried a gentle blow from the connector hole but the result was worse.
Any idea on how to clean the screen inside?
I hope it is not necessary to go to an Apple Center and pay for the "cleaning service".
Regards,
Andrea

It sounds safe to use
'Falcon's® "Professional" Dust-Off® "XL" compressed-gas is the perfect product for removing dust from your color transparencies before making scans or copy slides; it's also great for removing dust from cameras, lenses, computers and other electronic equipment. Each 12 oz. disposable can comes with its own trigger value and a 4.75" nozzle extension (a red tube) that allows you to place precise bursts of compressed air just where you want it.'
Check the directions on the back... also check the contents. Normally anything like that will inform you of contaminants harmful to delicate electrical devices.
If its just compressed air make sure you keep the can well back from the source.. and unplug the G5 (take it somewhere you don't mind dust.. there no point doing this in situe, just for it to suck it back in again!)
Also.. as mentioned.. keep the can upright (as the air is decompressed the can gets very cold)
Stu
Powermac G5 2.5 Mac OS X (10.4.2) 460gb HD 3gb RAM

How to clean from print driver hp B209a-M on windows 8

How do I clean my print heads from the print driver hp B209a-M on windows 8

Hi rcstipe,
Welcome to the HP forums!
I see you have a Photosmart B209a and are wanting to know how to clean the printhead via the software on Windows 8. I will definitely do my best to assist you with this.
There is full feature software for your printer for Windows 8, so as you would have with the few previous versions of Windows, it's done through the HP Solution Center. If you don't have the HP software installed yet, please download and run the HP Printer Install Wizard to get the software installed.
If you're not sure where to locate the clean printhead function once the software is installed, please have a look at Step four: Clean the printhead under Solution six: Print and evaluate a print quality diagnostic report and troubleshoot defects in this Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems document to see where to locate it.
Hope to hear back from you soon!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Can I get my iPad cleaned from dust under the screen at the Apple Store?

I have an iPad that I have purchased early last year. My warranty on the iPad is up and I have realized there is dust under the screen. There is a newly built Apple Store at a mall in my city. I am wondering if I could visit the store and request a technician to open my iPad and clean the screen, if it's possible they can do that. If I can, will there be a fee? If not, what other things can I do?

No, they will not be able to clean it at the store. They will likely only be able to offer a replacement at a substantial cost (if that). Based on what you have described, unless you are far wealthier than me, you get to live with it.

How to clean project from comman line ?

How to clean project from comman line ?
I would like to invoke the same functionality as in Flex
Builder Project -> clean... -> clean all projects...
but from command line is it possible ?

You can:
1) Perform a project clean up (p.153 of the user manual) - it removes any unused recordings, samples and other files
2) Consolidate project (p. 154 of manual) - this copies all the used audio material into the project folder and also deletes any empty folders within project folder, making it easier to navigate
3) Save project as a copy - this creates another project folder, but without all the backups and other additional files

How do I Clone dust spots from video across footage? I can do on individual frames but don't know ho

How do I Clone dust spots from video across footage in CC? I can do on individual frames but don't know how to batch process .
How do I save it after? Render?

To fill in the void in the background, you can use the clone tool. However, for a large area that may not work well.
A good alternative is to use a "digital patch". With the rectangular marquee tool , select a pleasing substitute from somewhere else in the picture (not a fire hydrant!), then place this on its own layer (CTRL+J), and with the move tool position the patch and resize it if indicated
You should also explore the Recompose tool (ALT+CTRL+R) which may work well for your purpose.

Database refresh from production to test -how to clean existing test env

All,
My environment is
Both Production and Test databases are in two node RAC environment
Oracle version - 10.2.0.4.0
OS - RHEL5
Production database size 80GB
We need to refresh the test environment from production database. Complete objects, data etc should be refreshed.
We have a datapump export from production environment. With this export dump from production environment, I need to import into test environment.
So far, I have imported with this kind of dump to the fresh database only.
Now, we have already objects, data sitting in the test environment. How to clean the existing test environment and refresh the production datapump export dump.
I thought of dropping all the tablespaces in test (other than system,sysaux, undo and temp). But not able to drop few tablespaces, it is telling that index is available in other tablespaces, dependency errors etc.
Which is the best method to clean the existing test database. Management is not interested in dropping the test database and recreating it.

I understand that you are Newbie , let give me simple steps.
Follow the steps on testing envi.
1. Drop only Application users that you want to refresh from Prod(Do NOT drop users system,sysaux.. or tablespaces)
2. Create the users that you dropped.
3. using import or import data pump import the data.
In case you want to import user"A" data to "B" use REMAP_SCHEMA option.
See the below link for data pump export/import with examples.
http://oracleracexpert.blogspot.com/2009/08/oracle-data-pump-exportimport.html
Hope this helps.
Regards,
Satishbabu Gunukula
http://oracleracexpert.blogspot.com
Click here for [How to add and remove OCR|http://oracleracexpert.blogspot.com/2009/09/how-to-add-and-remove-ocr-oracle.html]
Click here in [ Making decisions and migrating your databases |http://oracleracexpert.blogspot.com/2009/08/download-sql-developer-migration.html]
Click here to lean [ Static parameters change in SPFILE and PFILE|http://oracleracexpert.blogspot.com/2009/09/how-to-change-static-parameters-in.html]
Edited by: Satishbabu Gunukula on Sep 14, 2009 5:09 PM
Edited by: Satishbabu Gunukula on Sep 18, 2009 10:35 AM

How to clean the trash forever from locked files?

How to clean the trash forever from locked files?

Depends on what the problem is, but holding down the option key while emptying the trash will bypass the locked status and delete the files.
If those files are still in use (or the Finder thinks so), they cannot be deleted in the normal way. If the option key trick doesn't work, we can use the terminal.

Dust inside New iMac. (How to clean)?

I have a question. I just bought a new imac24, the 1st Apple PC I have ever had. I have been a PC user for 14 years (I do not know if the pc was using me or I was using it?) anyway I was always able to blow out the dust that builds up in my pc by opening the case and using an air can but the imac is sealed. Any ideas how to clean out the dust because after awhile it is bound to get dusty inside.. Thanks

there is no user servicable access. if U do open it you will void the warranty.
But as I live in a very dusty enviorment i did something to take care of the same concern.
I took one of my wife's silk scarves (really fine pattern for venting) and had it sewed into an envelope shape, open on one long side. this I then slip over the top of the iMac to keep out dust. it covers the vents and allows air circulation at the same time. I did check it out to see if my idea was working and it was dirty after about two weeks. washed it out and i feel it is doing what i intended.
I did have to replace my wife's scarf.
Norm

I have iPhone 4, it was working just fine..no I have a problem: it keeps searching for the network and then says no network..it was open to clean from inside..how can I fix the problem

I have iPhone 4, it was working just fine..no I have a problem: it keeps searching for the network and then says no network..it was open to clean from inside..how can I fix the problem

Tap Settings > General > Reset > Reset Network Settings
If that doesn't help, try here > iOS: Troubleshooting Wi-Fi networks and connections

How can i remove dust from the inside of my iMac ?

Good Morning (?)
Recently moved and there was a fair amount of dust in the new place, some of which has collected around the fan. Is there away to clean the dust that I would guess has migrated to the inside of the computer?
Early '09 IMac.
Thank you
Brian

As old as your iMac is, have you cleaned out the dust? Dust buildup can lead to over heating issues. Remove any and all things plugged into it including the power cord, Remove the RAM access grille. Vacuum all openings starting with the RAM access area (air intake). Vacuum all ports and plugs, DVD slot and the opening across the top of the rear of the body. Blow compressed air through all your openings and vacuum again to remove any dust you loosend. Reinstall the RAM grille. Plug in the keyboard and mouse if not blue tooth. Insert power cord...
You are now in a perfect position to do a
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
Here is a Widget to monitor your temps and other operations:
http://islayer.com/apps/istatpro/

How to clean a fan in a dv4 1123us laptop

Hello,
for some time I have a loud noise from the fan and I want to clean the fan from dust?
How can I clean it?I am not sure where and how to open the laptop from the back in order to get to the fan itself.
if u have a manual or something it will be great.
Thanks for the help.

heres a video
http://www.youtube.com/watch?v=4xFM3pvABbg
edit:
be careful
edit 2:
do it only after you watched it 3-4 times and dont do it if you still arent confident
give it to service
If my reply was helpful please click the "Kudos" star.
If your problem is solved please click the "Accept as Solution" button

How to clean c5-00 camera lens inside and out

pls help my phone is kinda cloudy when taking pictures... how to clean it properly and clening agents which is found on local market. tnx

Hi phoenixzurc,
If there is dust under the camera lens, please take the device to Nokia Care point and ask if they can clean it. Trying to clean it yourself might void the warranty of the device and potentially damage it. If there is dust on the lens, you can try to clean it with dry cloth.
Hope this helped!
Jampe
If the answer solves your issue, please click the ACCEPT AS SOLUTION button so other users can benefit from it as well. Giving a kudos (the white star) if my answer has helped will be appreciated.

How to Clean the Call Speakers - Lumia 920

This is a bad idea if you have a Lumia 920. Maybe you could try this on other phones but the quality of the Lumia 920 just pushes the dust around the inside of the phone and into the front camera somehow. I have had 3 Lumia 920 and the first two suffer from dust in the front camera which I think also affects the proximity sensor. I though that I was treating the phone wrong but it also happened to the windows store guy. There was an article on Windowsphonecentral.com about this and as for learning how to clean the speakers I would like to find out too.
Moderator's Note: A more appropriate subject was provided as this post was moved to the appropriate board.

You could use anti static cloth or compressed air to clean ive seen people using hoovers etc NOT ADVISABLE.
I would sent it to nokia care are its a known issue,it will be done under warranty.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

How to clean from dust Hp Pavilion 23-f200eg

Similar Messages

Maybe you are looking for