How to clean iPhone 6 (gold) antenna?!

I put my iPhone in my back pocket and the blue dye from my jeans got on the white antenna of iPhone (gold). How do I get it off?

Ok I think this might be a solution. I also noticed some dark smudges on my gold iPhone 6's antennas, though I'm not sure if it was from dye from my jeans. These dark smudges wouldn't come off with other household cleaners, like rubbing alcohol. Anyway, then I used a pencil eraser and rubbed it all over these dark smudges and they rubbed off! I'm not kidding, the pencil eraser got rid of all the dye, and the antennas look clean and new again! Try it, see if it may work for you!

Similar Messages

  • How to buy iPhone 4S Wireless antenna in india

    I got my ipone4S from USA about a year back. 2 days back just found my wifi button got greyed and it not working since then even after restroring my said phone.
    I had spoken with Apple customer care in India & also visited to authorised service centers. After evaluating my phone, they all are saying that its not a software problem & its a hardware problem. Above that my phone is also heating up like anything. I am afraid it may not burst anyday and brings our lives in to danger.
    Can i replace my iPhone 4S Wireless antenna in India and get my phone again in working condition & how to resolve this heating problem.
    Pls suggest.

    The iPhone is not user servicable. There are no legitimate sources for iPhone parts. All iPhone parts you will be able to find are either counterfeit, stolen, or salvaged from other iPhones. Your phone can not be serviced at any authorized servicer outside of the US. Either take it back to the US or send it to someone you know there to take it in to Apple and have it replaced.

  • How to clean iphone 4s

    how to clean my iphone 4s white piece, mud gets accumilated @ my menu botton, can some one help me out of this

    iPhone User Guide (For iOS 5.1 Software)

  • How to clean iphone speaker (used to hear person during calls)

    I believe my speaker is blocked because it fell in mud and Im not sure how to clear the speaker because it sounds very quiet even on full volume
    any help/suggestions?

    Try compressed air from one of the dust buster brands, blowing sideways, not directly at the speaker. You may have to try & loosen any dried mud with a soft toothbrush first, but again, a sideways motion & be very gentle, follow that with a vacuum source to try & capture any particles.

  • I broke my iphone 5s gold screen and I wanna change it to new one how much will it cost me in dollars??? and can i change it to black color

    i broke iphone 5s gold screen and i wanna change it to new one how much will it cost me ?

    Apple wil replace your iPhone with an out of warranty replacement but that replacement is going to be exactly the same as the old one. Apple does not allow you to change it.
    iPhone model
    Out-of-Warranty Service
    iPhone 5
    $269
    iPhone 4S
    $199
    iPhone 4, iPhone 3GS,
    iPhone 3G, Original iPhone
    $149

  • How to clean the junk files in iPhone 5S

    How to clean the junk files in iPhone 5S

    Howdy sdshiras,
    Welcome to Apple Support Communities.
    Take a look at the article linked below, it provides a lot of great information that you can use to identify content which is taking up storage space on your iPhone 5s.
    See how much storage you've used on your iPhone, iPad, and iPod touch - Apple Support
    Cheers,
    -Jason

  • How do I download the previos software iOS 6? I have the iOS 7 and my iPhone 5S gold keeps turning off all the time!

    How do I download the previos software iOS 6? I have the iOS 7 and my iPhone 5S gold keeps turning off all the time!

    Sorry, downgrading isn't supported by Apple.
    what troubleshootings steps have you done to try to resolve your issue?

  • How much it cost me if i wanna change full body for iPhone 5s gold

    how much its cost me if i wanna change full body of my iphone 5s gold or replacement

    A replacement under the "Out-of-Warranty" program will be of the same model, same capacity, same colour.

  • How can I boost ipad3's antenna signal reception?

    My Wifi router name don't appear in wifi networks list when I'm in the bedroom, where as all other devises like laptop, Blackberry can see the wifi router signal very well. If I keep my ipad3 very near to the wifi router it works well.
    The distance between wifi router and bedroom is not even 10 meters
    How can I boost ipad's antenna signal reception to see my wifi router?
    I already reset network settings and toggles airplane mode. Upgraded ios to the lastest version.

    There's no hardware solution.
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • How to mount iPhone 3gs on a macbook pro with maverick ?

    how to mount iPhone 3gs on a macbook pro with maverick ?

    There are unsupported mechanisms of doing what you want. You can search for iTunesFS.
    Garage Band should allow you to send Ring Tones to the 3GS via iTunes - GarageBand '11: Send an iPhone ringtone to iTunes  

  • TS1538 Hi technical support Team of  Apple  I am sorry but this time  I am very disappointed with IPhone and  IOS 7.1, actually I have IPhone 5,5S both and I was trying to Restore  my Phone for sell Because I want to by IPhone 64 Gold but unfortunately   

    Hi technical support Team of Apple  I am sorry but this time  I am very disappointed with IPhone and  IOS 7.1, actually I have IPhone 5,5S both and I was trying to Restore  my Phone for sell Because I want to by IPhone 64 Gold but unfortunately    both phone stuck on recovery mode with error 1, and 3
    I got Error 3 on IPhone 5 and error 1 In IPhone 5s , I did lot of try as I can my level best , like Update iTunes, stop all security, change cable even change computer format my laptop and install everything fresh in window   I did try to with Mac of my friend,
    Change Internet connections try with DFU mode, Make DFU file Also with redsnow   everything I did
    Whatever on internet information like go to  cmd and run as administrator  to make change hosts file
    Like ipconfig/flushdns everything  everything  what I can….  but I dint get good results and  good information about this error
    Somebody told me this is hardware problem, I make change my battery and charging connector too.
    I don’t know what to do next.. because  I don’t leave any experiment on my stuck phone..
    Note : one  is big issue that apple support team  is also and giving good answer
    I am in Saudi Arabia so I don’t  have any nearest store of Apple.. even Saudi Is Big Consumer of IPhone
    Its Really Bad its big Loss of Money I can’t afford more , Now will not Buy Any IPhone  in future if I don’t get solution..
    Thank You..

    What the **** is this taht you will not provide any service due to just a bit jailbreak..
    we are not much tecnical person.. and mostly consumer dont have good idea about Jailbreak. make your device  much better secure from hacker and jailbreak please we cant afford much money please give me any solution i ll not do jailbreak again please  

  • How to clean project from comman line ?

    How to clean project from comman line ?
    I would like to invoke the same functionality as in Flex
    Builder Project -> clean... -> clean all projects...
    but from command line is it possible ?

    You can:
    1) Perform a project clean up (p.153 of the user manual) - it removes any unused recordings, samples and other files
    2) Consolidate project (p. 154 of manual) - this copies all the used audio material into the project folder and also deletes any empty folders within project folder, making it easier to navigate
    3) Save project as a copy - this creates another project folder, but without all the backups and other additional files

  • How to clean the surface of my mac book pro?

    Howdy. I have a retina mac book pro (I think model doesn't matter).  My question is how to clean the surface when it gets dirty. Like to use what kind of cloth and maybe some special cleaners and etc. Someone if you are experienced could you please answer me?
    Thanks in advance!

    http://www.monstercable.com/productdisplay.asp?pin=2105
    Special MicroFiberTM cloth gently polishes your display without scratching it.
    Contains a special polymer to protect your display, while reducing static electricity that attracts dust.
    Liquid gel will not drip into delicate electronics.
    Alcohol-free, ammonia-free formula removes dust, dirt, and fingerprints without damaging your display’s protective coating.
    Monster™ iClean™ Screen Cleaner 

  • How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?

    Hi All,
    How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?
    Assume Material is Pen.
    While creating Sales Order in VA01 how to bring different price for the same material for Platinum,Gold and Silver Customers.
    Kindly help me out.
    Thanks,
    Renjith Jose

    A good place to start is http://www.javaworld.com/javaworld/javatips/jw-javatip34.html
    Also, do a search in this forum on HttpURLConnection. That class allows you to use POST method to send form data to a web server.
    "Hidden" variables are only hidden in HTML. The HTTP that gets POSTed to the web server doesn't distinguish between hidden and not hidden. That is, the content you would write to the HttpURLConnection.getOutputStream() would be something like:
    hidden=1&submit=ok(Of course, the variable names would depend on what the web server was expecting from the form.)
    Also, be sure to set the Content-Type request parameter to "application/x-www-form-urlencoded"

  • How to sync iphone 5 and ical?

    how to sync iphone 5 and ical?

    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    http://www.apple.com/support/macbookpro
    http://www.apple.com/support/ical
    http://www.apple.com/support/iphone

Maybe you are looking for

  • New iMac 24"?

    Hi, I've been thinking about buying a new 24" aluminum iMac for awhile. the only thing that has kept me from doing this is all the screen issues I hear about (gradient problems, etc). Does everyone have these screen issues or is it just a certain num

  • File size issue with exporting PDF

    We write a newsletter for our daughter's gym and are trying to export a Pages '08 document into a PDF small enough for e-mail. When we export with Best settings the file size is 3.2MB, with Better the file is 4.1MB and with Good the file size is 3.8M

  • IPhoto doesn't show up in iMovie media browser

    I have the fully installed iLife 06, and when I am in iMovie and go to the media browser to pick an image, nothing shows up to populate the browser. It seems as if the browser is not seeing iPhoto. I have tried this with iPhoto open and closed. No di

  • Can't open LR 3.6 and LR 4.1 at same time.  Normal?

    I have 4.1 and 3.6 installled in their default locations, and have a shortcut for each on my desktop.  I'd like to open both and switch between to easily compare features.   But if I open one, minimize it than try to open the other by clicking on its

  • How does one tie DBA_HIST_SQLBIND to DBA_HIST_SQL_PLAN?

    Since DBA_HIST_SQLBIND seems to associate a bind variable with a particular sql_id of a snap_id, I am finding it hard to locate the correct query plan for a query that has multiple hash plan values. Or, if you have a better way of doing this, I am al