How to clean the PC of QT and reinstall qt7.6?

1) QT-7.6 loads on XP-prof_sp3 OS PC with DirectX-9, but on running gives error as follows:
DLL server window: QTplayer.exe - Application error:
The exception unknown software exception (0xc0000409) occurred in the application at location 0x0040130d.
2) After repeated trials in installation the QT-7.x, it is neither running nor de-installing from start-up or control panel. It rolls back de-installation after almost completing it.
3) Also tried QT removal from system as given in the qt-support site i.e delete folders and qt files from win/system32 and recycle bin after de-installing using regcleaner>qt de-install using qt uninstall start-up menu>run regclean>shutdown>restart>reinstall qt-7.6>gives installation error now....???
4) How to clean the PC of QT.
Please help
as

Please refer to the below shown link as I feel this might be helpful to you
http://www.instructables.com/id/Clean-Your-Sticky-Laptop-Keyboard/?ALLSTEPS
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

Similar Messages

  • Recently i have been getting the color wheel a lot and it is screwing with my happiness.  Any thoughts on how to clean the computer up so this stops?

    Recently i have been getting the color wheel a lot and it is screwing with my happiness.  Any thoughts on how to clean the computer up so this stops?

    Back up all data immediately as your boot drive may be failing.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|Previous Sh' | tail | open -ef
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.

  • How to clean the keyboard/mousepad and surrounding areas

    Hi, does anyone have any suggestions as to how to clean the white plastic interface(keypad, mousepad etc.) of the macbook, the **** thing is a magnet for dirt and oils

    http://docs.info.apple.com/article.html?artnum=30889

  • How to clean the surface of my mac book pro?

    Howdy. I have a retina mac book pro (I think model doesn't matter).  My question is how to clean the surface when it gets dirty. Like to use what kind of cloth and maybe some special cleaners and etc. Someone if you are experienced could you please answer me?
    Thanks in advance!

    http://www.monstercable.com/productdisplay.asp?pin=2105
    Special MicroFiberTM cloth gently polishes your display without scratching it.
    Contains a special polymer to protect your display, while reducing static electricity that attracts dust.
    Liquid gel will not drip into delicate electronics.
    Alcohol-free, ammonia-free formula removes dust, dirt, and fingerprints without damaging your display’s protective coating.
    Monster™ iClean™ Screen Cleaner 

  • How to clean the Stuck Workflow activities in oracle application 11i

    Hi All,
    Can anyone please give me the steps/Metalink Doc ID about how to clean the stuck workflow activities in Oracle Apps 11i.
    Thanks,
    Dinesh.

    969325 wrote:
    Hi All,
    Can anyone please give me the steps/Metalink Doc ID about how to clean the stuck workflow activities in Oracle Apps 11i.
    Thanks,
    Dinesh.Please see old threads for the docs you need to refer to -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Workflow+AND+Stuck&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • How to clean the Trubrite screen of my laptop?

    Any suggestions on how to clean the Trubrite screen of my laptop? There were a lot of ideas given in the web but none of them were convincing enough?

    For my computer LCD screen I bought screen cleaning fluid and I use it with a lint-free cloth.
    Its a perfect combination ;)

  • How to Clean the Command History in SAP Logon Screen

    Hi
    Can any one let me know on how to clean the Command History (Where we generally enter the T Codes) in SAP Logon Screen.
    I dont want to List/see all the Previous command Hits in drop down box.
    Thanks
    Dan

    Hi Eric and Markus,
    We found the Solution and off course we did good R & D, Finally I am able to implement the fix to Clear the Command Line History.
    All I did is I Disabled the Permissions for Code Folder (Right Click > Permissions > Deny) in Regedit.
    Thats It, The Commands stopped storing in the History.
    Thank you Erick and Markus.
    Rg
    Dan

  • How to clean the junk files in iPhone 5S

    How to clean the junk files in iPhone 5S

    Howdy sdshiras,
    Welcome to Apple Support Communities.
    Take a look at the article linked below, it provides a lot of great information that you can use to identify content which is taking up storage space on your iPhone 5s.
    See how much storage you've used on your iPhone, iPad, and iPod touch - Apple Support
    Cheers,
    -Jason

  • How to Clean the iPod?

    I was wondering how you clean the metal panel on the back of the Nano. I used a tissue with soap and water and it got clean but I have heard people use metal wool to clean the back of their iPods in general.
    So how do you really clean the back of the iPod Nano?
      Windows XP   512mb of Ram

    Hey
    i prefer this guide, much clearer on what to do
    PM

  • How to clean the dust inside the screen of the iPod Touch?

    Hi everybody,
    lately some dust entered inside the screen of my iPod Touch.
    At first it looked like one or two pixels were gone bad, but it is just some annoying dust.
    The problem is that I cannot figure out any way to remove it.
    I tried a gentle blow from the connector hole but the result was worse.
    Any idea on how to clean the screen inside?
    I hope it is not necessary to go to an Apple Center and pay for the "cleaning service".
    Regards,
    Andrea

    It sounds safe to use
    'Falcon's® "Professional" Dust-Off® "XL" compressed-gas is the perfect product for removing dust from your color transparencies before making scans or copy slides; it's also great for removing dust from cameras, lenses, computers and other electronic equipment. Each 12 oz. disposable can comes with its own trigger value and a 4.75" nozzle extension (a red tube) that allows you to place precise bursts of compressed air just where you want it.'
    Check the directions on the back... also check the contents. Normally anything like that will inform you of contaminants harmful to delicate electrical devices.
    If its just compressed air make sure you keep the can well back from the source.. and unplug the G5 (take it somewhere you don't mind dust.. there no point doing this in situe, just for it to suck it back in again!)
    Also.. as mentioned.. keep the can upright (as the air is decompressed the can gets very cold)
    Stu
    Powermac G5 2.5 Mac OS X (10.4.2) 460gb HD 3gb RAM

  • How to Clean the Call Speakers - Lumia 920

    This is a bad idea if you have a Lumia 920. Maybe you could try this on other phones but the quality of the Lumia 920 just pushes the dust around the inside of the phone and into the front camera somehow. I have had 3 Lumia 920 and the first two suffer from dust in the front camera which I think also affects the proximity sensor. I though that I was treating the phone wrong but it also happened to the windows store guy. There was an article on Windowsphonecentral.com about this and as for learning how to clean the speakers I would like to find out too.
    Moderator's Note: A more appropriate subject was provided as this post was moved to the appropriate board.

    You could use anti static cloth or compressed air to clean ive seen people using hoovers etc NOT ADVISABLE.
    I would sent it to nokia care are its a known issue,it will be done under warranty.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • How to clean the cloth?

    My macbook pro came with a wonderful screen cleaning cloth -- it picks up dust fabulously well.
    And, Apple tells us how to clean the screen.
    My question:  what is the safe method of cleaning the cloth !?

    machine washable..don't use fabric softner, it will ruin the microfibers.  for more info -------->"more like this"

  • How to "clean" the tablespace USERS ?

    I have a user "GIS", it's tablespace is USERS, there are only two tables in this user(RASTER_DATA and RASTER_DATA_RDT).
    I put some raster data in "GIS", now I delete all data(delete from RASTER_DATA), but the tablespace USERS is still 7/10GB, how to "clean" the USERS?

    zhu19774279 wrote:
    I have a user "GIS", it's tablespace is USERS, there are only two tables in this user(RASTER_DATA and RASTER_DATA_RDT).
    I put some raster data in "GIS", now I delete all data(delete from RASTER_DATA), but the tablespace USERS is still 7/10GB, how to "clean" the USERS?When you delete a row, or all the rows, the extent that was allocated for them stays allocated. De-allocating/re-allocating extents is a fairly expensive operation, and it is assumed that if a table once needed an extent it will probably need it again, so it is not routinely de-allocated just because it is empty at the moment.

  • How to clean the clipboard?

    Hello!
    Recently I got confused by this simple question: How to clean the clipboard?
    One more,How to reset the count of photos?
    Message was edited by: zyf

    Shut down Dreamweaver and relaunch it.
    Alec
    Adobe Community Expert

  • How to clean the whole cooling system of Qosmio X770-107

    Hi Guys,
    is there any manual, how to clean the whole cooling system of an X770-107 Gaming Notebook??
    I can try to clean the dust on the intake and outtake of the laptop, but whats in the middlepart of the cooling system??
    Any Ideas??

    As Tonny already wrote all you can do is to use compressed air and try to clean t up.
    For professional clean-up the whole notebook must be disassembled. After doing this there is full access to all cooling modules.
    Of course this must be done by authorized personal only. Some kind of maintenance manual is not a public document. What you can do is to contact nearest Toshiba service and ask how much such professional clean-up costs.
    By the way: this notebook cannot be so old so I dont think it is full of dust.

Maybe you are looking for

  • (solved) get X to use my PCI card instead of onboard graphics.

    I'm trying to install arch on an old P4 dell (dimension 2350) and given the specific requirements and restrictions of this given beast I'm having a bit of trouble getting X configured.  (I'm turning it into a replacement for my modded xbox running xb

  • How can I have Firefox in English ONLY please!!!!

    I want to download Firefox in English, however, I am in Spain and the browser is automatically downloaded in Spanish, is there a way to resolve this issue?

  • How i can run java bean

    i want to run java bean at bean area. i write a simple bean and what i will write on oracle forms builder bean area property palette implementation class. i make bean a jar file and i put it same folder with form file. thanks for your helps

  • RC and Windows 2003 Server Security

    How do I get around the security on my 2003 Terminal Server (MetaFrame) where I have Remote Control deployed? It's authenticated but will not connect to the workstation. It's like the IP is blocked, but why would it care about outbound addresses? I'm

  • HT1296 Where is the "info tab" on iTunes V11.1.3???

    The "info tab" on iTubes V11 is missing. Cannot sync calender, mail and contacts.