How to clean the whole cooling system of Qosmio X770-107

Hi Guys,
is there any manual, how to clean the whole cooling system of an X770-107 Gaming Notebook??
I can try to clean the dust on the intake and outtake of the laptop, but whats in the middlepart of the cooling system??
Any Ideas??

As Tonny already wrote all you can do is to use compressed air and try to clean t up.
For professional clean-up the whole notebook must be disassembled. After doing this there is full access to all cooling modules.
Of course this must be done by authorized personal only. Some kind of maintenance manual is not a public document. What you can do is to contact nearest Toshiba service and ask how much such professional clean-up costs.
By the way: this notebook cannot be so old so I dont think it is full of dust.

Similar Messages

  • HI how to debug the whole SC creation process

    Hi
    I need small help from all you great guys.
    I am working with EBP application.
    I want to know the process of creation of shopping cart to the creation of PO in the r/3 system.
    How to debug the whole process. I can create a shopping cart in the EB web. I want to know what is hapening in the backend during the creation of shopping cart.
    I know the web transaction for the creation of the shopping cart. I tried to debug the process by going SE80 and giving the web transaction , but it is very cumbersome process and i was confused. Is there any way i can know what is happening in the backend and how the SC data is transferred to the bacend and how PO is created in the R/3 system
    sankar

    Hi Sankar Rao
    we can debug the shopping cart from sap GUI via tran.  /nBBPSC01
    1 Click on internal Goods/services  and select the product for which you want to create a SC and press enter.
    2 In command window input  /h and press enter
    3 Click on the button Order it will go in debug mode.
    4 Insert break points on Statement - Select
    5 Insert break points on Statement - Insert
    6 Insert break points on Statement -  update
    and press F5 key to move one step ahead and F8 key to halt directly at each break point.This way go upto the save mode and order your SC at run time in debug mode.
    regards,
    Nimish Sheth
    NB Do rewards points for helpful anwsers.

  • How to clean the PC of QT and reinstall qt7.6?

    1) QT-7.6 loads on XP-prof_sp3 OS PC with DirectX-9, but on running gives error as follows:
    DLL server window: QTplayer.exe - Application error:
    The exception unknown software exception (0xc0000409) occurred in the application at location 0x0040130d.
    2) After repeated trials in installation the QT-7.x, it is neither running nor de-installing from start-up or control panel. It rolls back de-installation after almost completing it.
    3) Also tried QT removal from system as given in the qt-support site i.e delete folders and qt files from win/system32 and recycle bin after de-installing using regcleaner>qt de-install using qt uninstall start-up menu>run regclean>shutdown>restart>reinstall qt-7.6>gives installation error now....???
    4) How to clean the PC of QT.
    Please help
    as

    Please refer to the below shown link as I feel this might be helpful to you
    http://www.instructables.com/id/Clean-Your-Sticky-Laptop-Keyboard/?ALLSTEPS
    Hope this helps, for any further queries reply to the post and feel free to join us again
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    Although I am an HP employee, I am speaking for myself and not for HP

  • How to clean the html code multiple pages simultaneously with Dreamweaver or other soft ?

    hello,
    How to clean the html code multiple pages simultaneously with Dreamweaver or other soft ? I have hundreds of pages to clean
    Thanks !

    I would start afresh. I would also use Dreamweaver's template system to make thing a lot easier. Have a look at the following, copy and paste into a new document and view in your favourite browser.
    <!doctype html>
    <html>
    <head>
    <meta name="viewport" content="width=device-width, initial-scale=1.0">
    <meta charset="utf-8">
    <title>Untitled Document</title>
    <link rel="stylesheet" type="text/css" href="//netdna.bootstrapcdn.com/bootstrap/3.1.1/css/bootstrap.min.css" />
    <link rel="stylesheet" type="text/css" href="//netdna.bootstrapcdn.com/bootstrap/3.1.1/css/bootstrap-theme.min.css" />
    <script type="text/javascript" src="ScriptLibrary/jquery-latest.pack.js"></script>
    <script type="text/javascript" src="//netdna.bootstrapcdn.com/bootstrap/3.1.1/js/bootstrap.min.js"></script>
    <style>
    .hline {
        background: url(http://yannick.michelat.free.fr/barre.gif);
        height: 10px;
        margin-top: 10px;
        margin-bottom: 10px;
    </style>
    </head>
    <body>
    <div class="container">
        <div class="row">
            <div class="col-xs-7">
                <img alt="" class="img-responsive pull-right" style="margin-top:20px;" src="http://yannick.michelat.free.fr/Calanques.gif" />
            </div>
            <div class="col-xs-5">
                <img alt="" class="img-responsive center-block" style="margin-top: 40px;" src="http://yannick.michelat.free.fr/grandportfolio.gif" />
            </div>
        </div>
        <div class="row hline"></div>
        <div class="row">
            <div class="col-xs-6 col-sm-4 col-md-2"> <a href="#" class="thumbnail"> <img src="http://yannick.michelat.free.fr/vign__CalanquesConseil-01.jpg" alt="" class="img-responsive"></a></div>
            <div class="col-xs-6 col-sm-4 col-md-2"> <a href="#" class="thumbnail"> <img src="http://yannick.michelat.free.fr/vign__CalanquesConseil-02.jpg" alt="" class="img-responsive"></a></div>
            <div class="col-xs-6 col-sm-4 col-md-2"> <a href="#" class="thumbnail"> <img src="http://yannick.michelat.free.fr/vign__CalanquesConseil-03.jpg" alt="" class="img-responsive"></a></div>
            <div class="col-xs-6 col-sm-4 col-md-2"> <a href="#" class="thumbnail"> <img src="http://yannick.michelat.free.fr/vign__CalanquesConseil-04.jpg" alt="" class="img-responsive"></a></div>
            <div class="col-xs-6 col-sm-4 col-md-2"> <a href="#" class="thumbnail"> <img src="http://yannick.michelat.free.fr/vign__CalanquesConseil-05.jpg" alt="" class="img-responsive"></a></div>
            <div class="col-xs-6 col-sm-4 col-md-2"> <a href="#" class="thumbnail"> <img src="http://yannick.michelat.free.fr/vign__CalanquesConseil-06.jpg" alt="" class="img-responsive"></a></div>
            <div class="col-xs-6 col-sm-4 col-md-2"> <a href="#" class="thumbnail"> <img src="http://yannick.michelat.free.fr/vign__CalanquesConseil-07.jpg" alt="" class="img-responsive"></a></div>
            <div class="col-xs-6 col-sm-4 col-md-2"> <a href="#" class="thumbnail"> <img src="http://yannick.michelat.free.fr/vign__CalanquesConseil-08.jpg" alt="" class="img-responsive"></a></div>
            <div class="col-xs-6 col-sm-4 col-md-2"> <a href="#" class="thumbnail"> <img src="http://yannick.michelat.free.fr/vign__CalanquesConseil-09.jpg" alt="" class="img-responsive"></a></div>
            <div class="col-xs-6 col-sm-4 col-md-2"> <a href="#" class="thumbnail"> <img src="http://yannick.michelat.free.fr/vign__CalanquesConseil-10.jpg" alt="" class="img-responsive"></a></div>
            <div class="col-xs-6 col-sm-4 col-md-2"> <a href="#" class="thumbnail"> <img src="http://yannick.michelat.free.fr/vign__CalanquesConseil-11.jpg" alt="" class="img-responsive"></a></div>
            <div class="col-xs-6 col-sm-4 col-md-2"> <a href="#" class="thumbnail"> <img src="http://yannick.michelat.free.fr/vign__CalanquesConseil-12.jpg" alt="" class="img-responsive"></a></div>
        </div>
        <div class="row hline"></div>
    </div>
    </body>
    </html>

  • How to clean the plex?

    How to clean the plex?

    Mate,
    we need more details; Is your filesystem based on Veritas volume manage and file system [Storage Foundation]
    - the terminoloy "plex" suggests this. If so post the output of this command subsituting the actual volume name
    and disk group name:
    vxprint -g diskgroup_name -qht vol_name
    If it's Solaris Volume Manager [ solstice ] or ZFS i will let the other gurus answer as my speciality is Veritas

  • How to clean the windows registry after an unclean install or previous SP2/SP1 uninstall.

    How to clean the windows registry after an unclean install or previous SP2/SP1 uninstall.
    <b>Procedure:</b>
    Run regedit -
    1. Go to HKEY_LOCAL_MACHINE\Software and delete iPlanet folder,
    2. Go to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services delete the entries for :  adminXXX-serv,  iAS60, slapd4.1, slapd-servername.
    Run regedt32 -
    1. Go to HKEY_LOCAL_MACHINE/SYSTEM/ControlSet001/Enum/Root    changed the permission for key LEGACY_SLAPD-xxx from security, and delete it,    check in other controlSet (002/003) also,  including currentControlSet.
    If you are cleaning the Registry after an uninstall, than after cleaning
    registry delete the iAS home dir and "reboot" the computer.

    Sanjeev:
    Maybe you can help. I haven't been able to resolve this one "small" problem which is preventing me from rolling out iWS6.0 SP2. I created a new instance of the server using "Add Server" so that I have 2 Web sites (e.g. test1.domain.com and test2.domain.com), but the 2nd server instance is pointing to the same HTML location as the first (i.e. http://test2.domain.com takes you to the same location as http://test1.domain.com). What do I need to change and where to fix this? Need a VERY quick answer to this to implement a production Web server. I've tried the suggestions made so far (see: http://softwareforum.sun.com/servlet/ProcessRequest?RHIVEID=181&RPAGEID=135&HOID=50B500000008000000966A0000&UCATEGORY_0=_23_%24_6_&UCATEGORY_S=0&USEARCHCONTEXT_QUESTION_0=server+instances&USEARCHCONTEXT_QUESTION_S=0) but nothing has resolved this problem. If you have any ideas at all, I'd appreciate if you could let me know :)
    Thanks!

  • Can Time Machine Restore the whole operating system ?

    Hi there,
    I understand Time Machine can be used to locate files which were accidentally deleted.
    But can it restore the whole OS system together with all the settings to say a 2 weeks ago ?
    If can, I desperately beg someone to be kind enough to guide & teach me how to do it step by step.
    Many thanks

    RyanManUtd wrote:
    Question 1:
    I am doing a full restore on the same Mac. For avoidance of doubt, can you kindly confirm that the first paragraph of item#14 does not apply to me ?
    Yup. This works fine if it's the same Mac. That's what it's intended for.
    Question 2:
    I have a Lacie Firewire800 external HDD connected to my Mac, I have already updated & backup data on this Lacie FW800 HDD to yesterday.
    As I intend to restore the entire system to 2 weeks ago, I am afraid that my Lacie would also be restored to 2 weeks ago, would it ?
    When you say "entire system", it refers only to the Mac internal harddrive or everything connected to it ?
    Ah, yes, that's a bit misleading. That procedure will restore your internal HD only. By "entire system," it really means everything on your internal HD (which is all most users have): OSX, apps, configuration, users, settings, preferences, data.
    If you want to restore an external HD, you must do that separately, so your LaCie won't be touched. Just to be extra-safe, I'd eject and disconnect it if I were you.

  • How to clean the surface of my mac book pro?

    Howdy. I have a retina mac book pro (I think model doesn't matter).  My question is how to clean the surface when it gets dirty. Like to use what kind of cloth and maybe some special cleaners and etc. Someone if you are experienced could you please answer me?
    Thanks in advance!

    http://www.monstercable.com/productdisplay.asp?pin=2105
    Special MicroFiberTM cloth gently polishes your display without scratching it.
    Contains a special polymer to protect your display, while reducing static electricity that attracts dust.
    Liquid gel will not drip into delicate electronics.
    Alcohol-free, ammonia-free formula removes dust, dirt, and fingerprints without damaging your display’s protective coating.
    Monster™ iClean™ Screen Cleaner 

  • How to read the whole name of a music title while scrolling down a list of titles? With the new iOs7 Music App there is no more black box showing the entire name!

    How to read the whole name of a music title while scrolling down a list of titles? The old software-app had the function to click for a longer time on a titles beginning letters until a black box revealed the entire name. I miss this function especially for my classical music, because lots of pieces start with similar words. E.g.:
    "Beethoven: Variations On "Ein Mädchen Oder Weibchen", Op. 66 - Var. 1"
    "Beethoven: Variations On "Ein Mädchen Oder Weibchen", Op. 66 - Var. 2"
    Scrolling in a list of title, I can't distinguish the titles, because just the first words are shown followed by: "...".
    That's horrible!

    Or you could include a width to your body style:
    body {
    background-image: url(Logo/sky1.jpg);
    background-position: center center;
    background-attachment: fixed;
    width: 75%;}
    It might work or not depending on your other color scheme.

  • How to fill the whole screen of my iMac with the photos included in an iDVD project. (iDVD v. 7.1.2)

    How to fill the whole screen of my iMac with the photos I included in an iDVD project. (iDVD v. 7.1.2). I mean, during playing the burned dvd.
    When I do "Enter Full Screen", the slide show fills the screen but the photo itself remains in the middle with a wide black border filling the rest.
    Any cure for this ?

    Hi
    In iDVD Preferences - Turn off - TV-Safe area - and the Photos will fill the full area with just letterboxing or pillars as max.
    Then "Save as a DiskImage" and test this and see if this plays better - before burning DVDs that's not as You want them.
    Bengt W

  • How to highlight the whole row of a particular line item of sale

    How to highlight the whole row of a particular line item of sales order depending on condition?
    Please help its urgent..
    Looking forward your reply.
    Moderator message: please do more research before asking, show what you have done yourself when asking, do not flag posts as "urgent".
    [Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
    [Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
    Edited by: Thomas Zloch on Aug 9, 2011 9:30 AM

    Any ideas on what would cause this NOT to work? I added this row right after the table is created and populated and it is still not highlighted when I enter the form. The snippet of code that does this is:
    MyTableModel modelS = (MyTableModel)dataModel.get("S");
    jTable1 = new JTable(modelS);
    jTable1.setRowSelectionInterval(0,0);MyTableModel is this:
    class MyTableModel extends DefaultTableModel {
      public MyTableModel(Object[] columnNames, int numRows) {
        super(columnNames, numRows);
      public boolean isCellEditable(int row, int column) {
        if (TableKey == 'S') {
          if (column == 6) {
            return false;
        if (TableKey == 'O') {
          if (column == 0 || column == 4 || column == 5) {
            return false;
        if (TableKey == 'P') {
          return false;
      return true;
    }Can anyone help? Thanks.
    Allyson

  • How to transfer the whole address book from one no...

    Dear friend,
    Could you please advise me "how to transfer the whole address book from one nokia to another nokia phone via blue tooth connectivity. (move one by one is not convenience for my hundreds of contact.
    Thank and waiting for advice...
    victor

    If your phones have the built-in "Transfer" (sometimes called "Switch") application, try it.
    Otherwise, depending on the model(s) you can also copy all contacts to/from the memory card, and get them over that way.
    And you can also synchronize both programs to the same service (e.g., Outlook on a Windows PC using Nokia PC Suite).
    And newer versions of Nokia PC Suite can also be used to make a backup of one phone, and then restore to another.
    PC Suite you can find here: http://www.nokia.com/pcsuite

  • How to get the current logical system?

    Dear Abapers:
    I can't find the logical system value from the table SYST, pls tell me how to get the current logical system name, Thanks!

    Hi,
    Check with the table T000, the Logical system field name is LOGSYS.
    Regards
    Thiru

  • How to cooperate the current mail system with Sun Java Commnication Suite 5

    Dear all and Shane,
    Excuse me for bothering you again.
    Due to time limited, I would like to know how to cooperate the current mail system with Sun Java Commnication Suite 5. I mean I would like to use current mail system (mailscanner + postfix + courier-IMAP + clamav + spamassassin + webmail) and use the outlook connector to connect to Sun Java COMMS 5 to share the calendar, contacts only.
    Right now I have done the testing by using outlook, mac mail, thunderbird to share calendar,contacts via Sun Java COMMS 5 in Centos Linux 5.
    My plan is as following
    1. Sun Java Communication suites 5 server ( I called it comms5 ) will be in DMZ zone and will open the necessary ports in firewall.
    2. I will create more than six sub domain name in Sun Delegate server and the necessary accounts within these domain names.
    3. All messages will be transmitted via Postfix and clients will retrieve from Courier-IMAP
    4. All Clients included other branch offices will use different mail clients to share their calendars, contacts via COMMS5 ( But how will COMMS handle the messages such like invitation ? )
    Any suggestions will appreciate.
    PS: Is it possible to classify the contacts in outlook address book ?
    For example, when user click the receiver, it will show like as following
    GLOBAL ADDRESS BOOK
    --Director
    --and so on
    ----CN.BRANCH OFFICE
    -----------CN01 EMAIL ADDRESS
    -----------CN02 EMAIL ADDRESS
    -----------CN03 EMAIL ADDRESS
    and so on
    ----JP.BRANCH OFFICE
    -----------JP01 EMAIL ADDRESS
    -----------JP02 EMAIL ADDRESS
    -----------JP03 EMAIL ADDRESS
    and so on
    ----TW.BRANCH OFFICE
    and Due to the user account is located in CN.BRANCH OFFICE, it will extend the CN.BRANCH OFFICE contacts level.
    Excuse me for bad English, hope you can understand it.
    Best Regards,
    Bruce

    Dogz wrote:
    Due to time limited, I would like to know how to cooperate the current mail system with Sun Java Commnication Suite 5.
    I mean I would like to use current mail system (mailscanner + postfix + courier-IMAP + clamav + spamassassin + webmail) and use the outlook connector to connect to Sun Java COMMS 5 to share the calendar, contacts only.Getting your current mail system to 'co-operate' in this way will require more time then simply migrating the accounts of users on the current mail system to the comm-suite-5 installation and making use of UWC for Webmail access and ClamAV/SpamAssassin integration within the messaging MTA.
    Also the use of Outlook Connector with a non-Sun IMAP backend isn't supported, nor is the use of a non-Sun IMAP backend possible with UWC.
    Right now I have done the testing by using outlook, mac mail, thunderbird to share calendar,contacts via Sun Java COMMS 5 in Centos Linux 5. Once again I should remind you that CentOS is not a supported platform for comm-suite-5
    Regards,
    Shane.

  • Recently i have been getting the color wheel a lot and it is screwing with my happiness.  Any thoughts on how to clean the computer up so this stops?

    Recently i have been getting the color wheel a lot and it is screwing with my happiness.  Any thoughts on how to clean the computer up so this stops?

    Back up all data immediately as your boot drive may be failing.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|Previous Sh' | tail | open -ef
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.

Maybe you are looking for