How to clear asset scrap value from the asset

Hi,
An asset has been partially retired in 2007 and transfered the balance to other asset. There is a scrap value in the same asset and still appearing in scrap value field of asset explorer. This is giving an error in asset year end closing. Please give a solution to solve this issue. The scrap value is visible in the asset under Planned values tab and there is zero net book value.
Regards
Paroy

Dear Markus,
I dont mean somebody would search for me. I replied to your query to get inputs from various people. Someone might have faced a similar issue, they may have a solution or someone might have known and implemented a Note.
I think the main purpose of these forums is knowledge sharing and quick solution to an issue which a person in question could not figure out.
Regards
Paroy

Similar Messages

Urgent: How to exclude a particular value from the selection in the infopac

How to exclude a particular value from the selection in the infopackage.
Ex: not load for cost center 10000
Thank you,
sam

Hi Sam,
You cannot do this directly as exclusion, but you can include all other values, even as ranges and thus exclude the particular value, else you can also try to do this by writing a routine.
Hope this helps...

How to retrieve query string value from the URL in my portlet

Hi,
When user clicks on "Advance Search", i am redirecting to page in the community. At the same i am adding some more values to the query string (to the URL).
My URL will look like this.
http://ctp-mc0149/portal/server.pt?space=CommunityPage&parentname=CommunityPage&parentid=0&in_hi_userid=200&cached=true&control=SetCommunity&PageID=202&CommunityID=200&searchType=2
Now in one of my portlet in that page, i want to retrieve the query string values from the URL.
Please help me regarding this.
Thanks in advance.
Thanks,
sreekanth.

Hi,
Look at the following threads,
For programmatically getting the iview properties,
Programmatically getting iView Properties
Also,
Get Properties of IView Programmatically
Permanent change of iView property programmatically
Hope these threads help u.
Regards
Srinivasan T

F4IF_INT_TABLE_VALUE_REQUEST - how can I return all values from the line?

Hi,
I'm using FM F4IF_INT_TABLE_VALUE_REQUEST to show a pop-up with my internal table values. The internal table has 3 fields, ATINN, ATZHL and a description field ATWTB. ATINN and ATZHL are needed to complete the unique table key, however this FM will only return the value of one field in any line I select.
How can I see all the values in the line I select in the return table?
My code is as follows:
DATA: tbl_cawnt LIKE cawnt OCCURS 0,
        wa_cawnt LIKE cawnt,
        BEGIN OF tbl_list OCCURS 0,
          atinn LIKE cawnt-atinn,
          atzhl LIKE cawnt-atzhl,
          atwtb LIKE cawnt-atwtb,
        END OF tbl_list,
        wa_list LIKE tbl_list,
        tbl_return LIKE ddshretval OCCURS 0,
        wa_return LIKE ddshretval,
        tbl_fields LIKE dfies OCCURS 0,
        tbl_dynp LIKE dselc OCCURS 0.
REFRESH: tbl_list, tbl_cawnt.
SELECT atinn atzhl atwtb
    FROM cawnt
    INTO CORRESPONDING FIELDS OF TABLE tbl_cawnt
    WHERE spras EQ sy-langu.
LOOP AT tbl_cawnt INTO wa_cawnt.
    CLEAR wa_list.
    MOVE: wa_cawnt-atwtb TO wa_list-atwtb,
          wa_cawnt-atinn TO wa_list-atinn,
          wa_cawnt-atzhl TO wa_list-atzhl.
    APPEND wa_list TO tbl_list.
ENDLOOP.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'ATWTB'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      value_org       = 'S'
    TABLES
      value_tab       = tbl_list
      return_tab      = tbl_return
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Thanks!

Hi,
Use the structure DYNPFLD_MAPPING
With this internal table you can easily define that you want to return
other columns of the hit list in addition to field RETFIELD to the
screen.
In this IT you can MAP the screen fields to the serch help screen fields this has three fields
FLDNAME this is the field anme from the search help
FLDINH This has to be blank which would be field with the field value that you want to map
DYFLDNAME THis is the screen field name.
So here you can get the values for the other fields that you want which are on the search help just populate the name of the fields in FLDNAME.
Regards,
Himanshu

How can I pass a value from the datagrid to my textinput

Hi i am new in adobe flex!
I have only one row in my datagrid and it has 5 dataField. Those dataFields are id, ln, fn, kurs, yr. I want to pass those value into a textinput respectively.
Heres my code:
<mx:DataGrid x="396" y="10" width="110" height="124" id="dginfo" enabled="true" dataProvider="{studinfo.lastResult.datas.data}" creationComplete="studinfo.send()" editable="false" visible="true">
                        <mx:columns>
                            <mx:DataGridColumn headerText="C0" dataField="username" visible="false"/>
                            <mx:DataGridColumn headerText="C1" dataField="id"/>
                            <mx:DataGridColumn headerText="C2" dataField="ln"/>
                            <mx:DataGridColumn headerText="C3" dataField="fn"/>
                            <mx:DataGridColumn headerText="C4" dataField="kurs"/>
                            <mx:DataGridColumn headerText="C5" dataField="yr"/>
                        </mx:columns>
                    </mx:DataGrid>
I want to pass it here (code)
<mx:TextInput backgroundColor="#ABA5A5" editable="false" enabled="true" color="#000000" horizontalCenter="-50" verticalCenter="-71" id="idview" text="{data.id}"/>
                    <mx:TextInput id = "idview" editable="false" enabled="true" text="{data.ln}"/>
                    <mx:TextInput id="lnview"editable="false" enabled="true"text="{data.fn}"/>
                    <mx:TextInput id="fnview" editable="false" enabled="true" text="{data.kurs}"/>
                    <mx:TextInput backgroundColor="#ABA5A5" editable="false" enabled="true" id="yrview" text="{data.yr}"/>
My problem is that this code won't work, it won't diplay anything...:D

it must not display anything as data.ln doesnot have any value. in your code, in the text property of textfield, data is considered as a property of your application, a dynamic object; so even it doesnot have ln property, it is not showing error, neither displaying anything.
do you mean to populate your textfields if the datagrid row is selected? if so:
<mx:TextInput id = "idview" editable="false" enabled="true" text="{dginfo.selectedItem.ln}"/>
if you want to populate the same data without caring if it is selected in datagrid, you should not think like you are getting data from datagrid, instead, you are getting your values directly from the studinfo.lastResult
in such:
<mx:TextInput id = "idview" editable="false" enabled="true" text="{studinfo.lastResult.datas.data.ln}"/>
note: if your result contains more than one data, you should treat it as array:
studinfo.lastResult.datas.data[0].ln

How to acquire two signal values from the same GPIB

I have a power meter which provides two values, the power and wavelength simultaneously. So when I'am giving in the GPIB write command probe a joint command is not provided by ILX light wave. So how can i get the values simultaneously.
Please help

Hi perumpadapu,
you should read the manual of your device/software. There you should find the answer.
Or ask the customer support for that device.
As long as you don't even provide a name of your device we cannot provide much more help!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How to pass wild card '%' value from the parameter to the query

Hello everyone,
I have following 2 problems
1) I was trying to do some thing like below
select * from emp
where ename like 'J%'
for this i have used the following code
select * from emp
where ename like :P_ENAME
and before running the query in the parameter box i entered J%. But my report returns an error which says INVALID PARAMETERS REQUESTED.
2) I have a req of passing both comma separated and wild card for the same parameter. If we take the same example as above,
user should be able to enter
a) JASON, SMITH, JOHN OR b) J%
I have used comma separated value option of the parameter for the csv values and its working fine, but i need to add the wild card feature also to the same parameter.
Can anyone please help me with these things?????
Thanks in advance!!
Raghu

Hi Raghu,
I guess you are in older version, You have to get into latest version to use %, it should work well
you should use where ( ename like :P_ENAME ) or ( ename in (:P_ENAME)) for both the condition to satisfy.

How to get a value from the previous element (XSLT/XPATH gurus ahoy!)

Hi All,
I am building an RTF template for a "letter of reference"-report. Sometimes there are several rows in the data, that need to be printed as one. This is due to consecutive temporary contracts, which will be printed out as one period of service.
Here's a simplified data example to illustrate the problem.
<ROW>
<START_DATE>01-01-1980</START_DATE>
<END_DATE>01-01-1988</END_DATE>
</ROW>
<ROW>
<START_DATE>01-01-1988</START_DATE>
<END_DATE>01-01-1990</END_DATE>
</ROW>
<ROW>
<START_DATE>01-01-2000</START_DATE>
<END_DATE>01-01-2005</END_DATE>
</ROW>
With the data above, I should print two lines:
01-01-1980 - 01-01-1990
01-01-2000 - 01-01-2005
I need to compare START_DATE of an element (except for the first one) with the END_DATE of the previous element, to find out whether to print the END_DATE for that element or not. How can I get that value from the previous element?
Thanks & Regards, Matilda

use this to get the following End_date
<?following-sibling::../END_DATE?>
Try this
<?for-each:/ROOT/ROW?>
==================
Current StartDate <?START_DATE?>
Current End Date <?END_DATE?>
Next Start Date <?following-sibling::ROW/END_DATE?>
Previous End Date <?preceding-sibling::ROW[1]/END_DATE?>
================
<?end for-each?>
o/p
==================
Current StartDate 01-01-1980
Current End Date 01-01-1988
Next Start Date 01-01-1990
Previous End Date
================
==================
Current StartDate 01-01-1988
Current End Date 01-01-1990
Next Start Date 01-01-2005
Previous End Date 01-01-1988
================
==================
Current StartDate 01-01-2000
Current End Date 01-01-2005
Next Start Date
Previous End Date 01

How to select multiple values from the parameters in BI Publisher report

How to select multiple values from the parameter drop down in BI Publisher, and how to handle this mulitple values from the report sql...

Hi kishore,
I have used all the steps as you mentioned in your previous reply....including checking Mulitple Selection Check Box..
Iam able to get the results when I am selecting one value..
and also I am able to handle multiple values the in the query by using IN :Parameter, but seems when we select more than one value from the parameter drop down i think the Bi Publisher is sending the values in concatenated form something ilke
ex: "'ACCOUNT','HR','SALES'" ,and when trying to display the parameters values in the output, its throwing the error as 'missing right paranthesis' ....on the whole do you have any solution which would handle
1.Single selection.
2.Multiple selection.
3.'ALL' Values.
4.Separating the concatenated string into individual strings and dispaly them on the output of the report..etc..in case of Mulitple selection.
Ex:
Concatenated String from BI Publisher:"'ACCOUNT','HR','SALES'"
Expected Output on the report:ACCOUNT,HR,SALES
reply to this would be much appreciated....
thanks,
manoj

How to get multiple values from the list

I've a list of an item which I queried it from the database. I also created a button that will takes a selected items from the list when it was clicked. I used javabean to get the data from database.
<%     // clicked on Select District Button
Vector vselectedDistrict = new Vector();
Vector vdistrictID = new Vector();
String tmpSelectDistrict = "";
tmpSelectDistrict = request.getParameter("bSelectDistrict");
if(tmpSelectDistrict != null)
     // get multiple values from the list
     String[] selectedDistrict = request.getParameterValues("usrTDistrict");
     vselectedDistrict.clear();
     vdistrictID.clear();
     if((selectedDistrict != null) && (selectedDistrict.length != 0))
                       for(int i=0;i<selectedDistrict.length;i++)
               vselectedDistrict.addElement(selectedDistrict);
          vdistrictID = dbaseInfo.getcurrentDistrictID(nstate,vselectedDistrict);
          for(int i=0;i<vdistrictID.size();i++)
               out.println("district = " + selectedDistrict[i]);                         out.println("district ID= " + vdistrictID.get(i).toString());
%>
// get vdistrict from the database here......
<select name="usrTDistrict" size="5" multiple>
<%     for(int i = 0; i< vdistrict.size(); i++)
%>
     <option value="<%=vdistrict.get(i).toString()%>"><%=vdistrict.get(i).toString()%></option>
<%
%>
</select>
<input type="submit" name="bSelectDistrict" value="Select District">
Lets say the item that i selected from the list is 'Xplace' and I clicked on the Select District button,
what I got is this error message:
org.apache.jasper.JasperException: Unable to convert string 'Xplace' to class java.util.Vector for attribute usrTDistrict: java.lang.IllegalArgumentException: Property Editor not registered with the PropertyEditorManager
So where is going wrong and what the message means?. Any help very much appreciated. Thanks

These are just guesses that might hopefully steer you in directions you haven't looked in yet.
I presume you used triangle brackets (< >) to avoid having the Jive Forum think it was the "italics" tag?
Are you certain this: dbaseInfo.getcurrentDistrictID(nstate,vselectedDistrict);
expects a Vector as its second parameter? And returns a Vector?
I don't believe you've shown how you use the javabean, or its code? Perhaps it should be rewritten to accept an array of strings instead of a Vector?

How to get all the values from the dropdown menu

How to get all the values from the dropdown menu
I need to be able to extract all values from the dropdown menu; I know how to get all those values as a string, but I need to be able to access each item; (the value in a dropdown menu will change dynamically)
How do I get number of item is selection dropdown?
How do I extract a ?name? for each value, one by one?
How do I change a selection by referring to particular index of the item in a dropdown menu?
Here is the Path to dropdown menu that I'm trying to access (form contains number of similar dropdowns)
RSWApp.om.GetElementByPath "window(index=0).form(id=""aspnetForm"" | action=""advancedsearch.aspx"" | index=0).formelement[SELECT](name=""ctl00$MainContent$hardwareBrand"" | id=""ctl00_MainContent_hardwareBrand"" | index=16)", element
Message was edited by: testtest

The findElement method allows various attributes to be used to search. Take the following two examples for the element below:
<Select Name=ProdType ID=testProd>
</Select>
I can find the element based on its name or any other attribute, I just need to specify what I am looking for. To find it by name I would do the following:
Set x = RSWApp.om.FindElement("ProdType","SELECT","Name")
If I want to search by id I could do the following:
Set x = RSWApp.om.FindElement("testProd","SELECT","ID")
Usually you will use whatever is available. Since the select element has no name or ID on the Empirix home page, I used the onChange attribute. You can use any attribute as long as you specify which one you are using (last argument in these examples)
You can use the FindElement to grab links, text boxes, etc.
The next example grabs from a link on a page
Home
Set x = RSWApp.om.FindElement("Home","A","innerText")
I hope this helps clear it up.

Urgent -open purchase orders existed in asset how to remove from the asset

Hi,
Some assets I am going to delete if the open purchase orders existed how to remove the open purchase orders from the asset what is the t/code to view the open purchase ordes.
Can any body give the details please.
Regards,
Prabhakar.

Use ME2N and give the required paramets in field Selection Parameters. Some of the available choices are
Open invoices
Open target value
Open issue quantity
Issue quantity reversible
Open goods receipt
PO AA link is established through Account Assignment Category A mentioned in PO. Select the PO with above and change the PO through ME22N

How can i get the all values from the Property file to Hashtable?

how can i get the all values from the Property file to Hashtable?
ok,consider my property file name is pro.PROPERTIES
and it contain
8326=sun developer
4306=sun java developer
3943=java developer
how can i get the all keys & values from the pro.PROPERTIES to hashtable
plz help guys..............

The Properties class is already a subclass of Hashtable. So if you have a Properties object, you already have a Hashtable. So all you need to do is the first part of that:Properties props = new Properties();
InputStream is = new FileInputStream("tivoli.properties");
props.load(is);

How to get the values from the resultset???

I have a problem with this code given below,
i am executing an sql query which return a union of values from two tables.
the problem here is how do i read the values from the resultset.
here is the code....
package com.webserver;
import java.sql.*;
public class UnionDemo{
public static void main(String args[]){
Connection connection =null;
Statement statement =null;
ResultSet rs =null;
try{
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
connection = DriverManager.getConnection("jdbc:oracle:thin:@:1521:ORCL","scott","tiger");
statement = con.createStatement();
rs = statement.executeQuery("(select tablename from node where appid=432) union (select tablename from uomnode where appid=432)");
ResultSetMetaData rsmd = rs.getMetaData();
int numberOfColumns = rsmd.getColumnCount();
while (rs.next()){
System.out.println(rs.getString(1));
// instead of rs.getString(1) I also used rs.getString("tablename") but of no success....
}//end of while
}catch(Exception exp){
exp.printStackTrace();
finally{
try{
if (rs!=null) rs.close();
if (statement!=null) statement.close();
if (con!=null) con.close();
}catch(Exception exp1){
exp1.printStackTrace();
}//end of finally
}//end of main
}//end of class
when i execute this program i get an oracle error ORA-01009
which says (java.sql.SQLException: ORA-01009: missing mandatory parameter)
can anyone help to retrieve the values from this resultset...
thanx

[cut]
i am executing an sql query which return a union of
values from two tables.
the problem here is how do i read the values from the
resultset.[cut]
When the error occours?
1) Executing query ?
2) Retrieving the field from the resultSet ?
3) ecc. ?
BTW, first of all, try to execute the query removing the parenthesis
of the two select statement. I know that there are some problem
with the oracle jdbc driver about them.
Hope it helps.

How to get multiple values from the db using select

hi all,
i am using oracle 9i database
i created a procedure
create or replace procedure sample_proce
as
to_i varchar2(50)
begin
select to_id into to_i from sample where flag in('y');
dbms_output.put_line('hai'|| to_i);
end;
when i executed this procedure the following error occurred.
error at line 5 fetching too many rows.
but when i execute the select query alone i can able to view all the rows.
how to resolve it

i used the following procedure
create or replace procedure sample_proc
as
begin
for s in(select to_id from sample where flag='y')
loop
dbms_output.put_line(s.to_id);
end loop.
end;
it is executed fine. i can able to fetch all the rows.
how to pass all these values into the another procedure.
we usually pass only one value into another procedure, i do no how to pass all the values . please help me.
Thank u.

How to clear asset scrap value from the asset

Similar Messages

Maybe you are looking for