How to clear bios on G4Ti4200-DT?

How do I clear bios on G4Ti4200-DT. In the manual I see many cards have twin bios whic makes it easy to clear the bios. But somehow I can't find any instuctions in the manual, and no jumper to move on the card. I just want the original bios back.

The card works, but I'm trying to get everything back to when the pc worked without problems.
What happend was as follows. Went to a lan party everything was fine until I got BF 1942 SWOWWII VCD and VCD5 from a friend, from that point my pc just rebooted every now and then with no prior notice. If I launced BF 1942 with out the SWOWWII the computer reebooted 3-5 and the game itself crashed 5-10 times. From that point everything went wrong, lots of error messages and reboots. So I tried every upgrade I could find xp updates and live update but nothing helped. Now I have formatted my pc 3 times tried both home and pro ed. but same story pc reboots now and then a bit more stable tough. I've tried every tip EA has on BF but the story is the same.
Strange thing is I played BF 1942 before the lan party without problems.

Similar Messages

  • How do I clear bios password (compaq CQ-62)

    How do I clear bios password (compaq CQ-62) the key code is 62154197

    Hi,
    Please try: 73832119
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I have hp 6720s laptop. i forget my bios password. plz tell me how i clear password

    i have hp 6720s laptop. i forget my bios password. plz tell me how i clear password

    After 3 failed attempts do you any code???
    Let me know.
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Sticky - 2) How to Flash Bios NVidia 64 & Award Bios - More Detail

    Sticky - How to Flash Bios NVidia 64 & Award Bios
    Warning Flashing the bios can be bad for your PC's Health
    DISCLAIMER:
    This is a work-in-progress, not all solutions are "confirmed", use info at your own risk
    Not all topics are covered, only stuff that keeps reapering in questions, or are thought to be important.
    Before going ahead checkout When and how to update your BIOS
    Note: Like reseting CMOS Flashing Bios will clear all any changes you made in bios & will need to be re-entered - see 12) below. So Make sure you remember/ make a note of them.
    Resources:-
    Floppy Images -  Boot Disc.com
    Simply insert Floppy & run downloaded Exe file.
    Bios Saviour
    IOSS Bios Saviour RD1-PMC4
    Bios Saviour - RD1 Model Selection Sheet
    SST 49LF040A LPC /3.3V - PMC4 For Neo3 250 & Neo4 (Thanks Arioch  )
    Recovery:-
    MSI - Bios Recovery
    Syar - Bios Recovery & Checksum Error 
    BIOS FAQ - How can you recover a corrupt BIOS ?
    Bios recovery the dirty
    way
    Saving MurdoK's Bios - Syar
    Offers Reprogramming/Replacement service - Cheaper than new mobo. Can't vouch for non uk service not used them. (1st off search engine)
    EU Recoverybios.com
    UK BiosflashUK
    US Badflash.com
    How to Flash MSI Guides.
    There are different ways to flash the bios but to keep things simple will concentrate on the MSI Official methods :-
    1) Award Flash BIOS Procedure 98/ME
    This method assumes access to hd formatted using FAT32 & therefore readable by DOS.
    2) Flashing the BIOS for Users using NON FAT file system
    For use with Linux based & NTFS File systems - HD Not readable from DOS.  Using this procedure the  the files are copied to the virtual drive before running the flash utility. So the flash effectively is all done in memory.
    This will be the method used by the majority of us. So:-
    Follow the instructions in the last link (Thanks Bas)
    The details below are additional checks/notes referring to the steps in Bas's guide, which may be useful.
    Essential
    2) Know Your model number  - Is of increased Importance for NEO4 users - We have already seen instances of this.
    5-1) Ensure you have a Boot Floppy with CD suport (this creates the Virtual drive used in the process) If you haven't got such
    a boot disc see BootrDisc.com link in Rescources.
    5-2) B4 booting floppy - Enter Bios & Load Optimised Defaults - To ensure that bios is returned to stock & any overclocking is
    turned off.
    7) If you miss the ramdrive letter the last DOS message will show your CD drive letter. The Ramdrive is the letter preceeding
    the CD Drive. EG CD = D Ramdrive = C
    Optional - Gives better control of procedure
    11) Use of Switch command options with AWFL833C.EXE /py/sn/wb/cc/cd/cp/r TargetBios.file
    Personnaly I use the switches as does Syar :-
    Per Syar2003 Iv'e always used :
    AWFL833D W7030NMS.xxx /py/sn/wb/cc/cd/cp/r
    or
    AWFL833D W7030NMS.xxx /py/sn/wb/cc/cd/cp/f/r
    And a hard reset with jumper when done .
    For a more detailed explanation of switches see :-
    Syar's Bios Switch Explained
    or Syar's Bios Collection - Flashing.txt
    See Also Using a Batch File to Automate bios flash
    12) after flash , enter Bios & load optimized defaults , then save + exit with no other change .
    That way you have a fresh system with a fresh non problematic dmi-pool and user settings .
    After this Enter Bios & Re-enter your custom settings.
    From Syar - Which one do I do first?
    Thanks to Bas & Syar for the majority of info in this guide 

     How to Flash Bios NVidia 64 & Award Bios
    General:-
    How to Flash Bios NVidia 64 & Award Bios
    Warning Flashing the bios can be bad for your PC's Health
    DISCLAIMER:
    This is a work-in-progress, not all solutions are "confirmed", use info at your own risk
    Not all topics are covered, only stuff that keeps reapering in questions, or are thought to be important.
    Before going ahead checkout When and how to update your BIOS
    Note: Like reseting CMOS Flashing Bios will clear all any changes you made in bios & will need to be re-entered - see 12) below. So Make sure you remember/ make a note of them.
    FLASH PREPARATION
    Always Load Optimised defaults & Save b4 flashing - NEVER FLASH When running an OC or Unstable.
    If you need to flash & are worried about stability - run with a single module & test it it memtest 1st.
    FLASH METHODS
    1) Winflash (Syar2003) -
    Winflash is safe to use if your windows and pc is stable .
    How to get it Download & install MSI Live Update. Winflash is located "C:\Program Files\MSI\Live Update 3\FlashUty\Award
    And as with dos flash reset bios and any overclocking to "load optimized bios default" + save, before and after flashing.
    After winflash is finished it ask if you want to reboot - answer no , and shutdown (turn off) windows/pc instead .
    After that disconnect the PSU's AC and reset the cmos with the jumper on the board .
    This is how I use it , - safest way .
    Note ! Place checkmarks on bootblock / dmi area /update all /reset cmos
    Using Winflash - Syar2003's GuideWinflash
    2)  MSI Guides for flashing using a floppy
    2 Flavours depending on OS the majority of us use the 2nd as dos floppies can't read a NTDS partition.
    2-1) Award Flash BIOS Procedure 98/ME
    This method assumes access to hd formatted using FAT32 & therefore readable by DOS.
    2-2) Flashing the BIOS for Users using NON FAT file system
    For use with Linux based & NTFS File systems - HD Not readable from DOS.  Using this procedure the  the files are copied to the virtual drive before running the flash utility. So the flash effectively is all done in memory.
    2) How to Flash Bios NVidia 64 & Award Bios - More Detail
    Resources:-
    Floppy Images -  Boot Disc.com
    Simply insert Floppy & run downloaded Exe file.
    Bios Saviour
    IOSS Bios Saviour RD1-PMC4
    Bios Saviour - RD1 Model Selection Sheet
    SST 49LF040A LPC /3.3V - PMC4 For Neo3 250 & Neo4 (Thanks Arioch  )
    Recovery:-
    MSI - Bios Recovery
    BIOS FAQ - How can you recover a corrupt BIOS ?
    Bios recovery the dirty
    way
    Saving MurdoK's Bios - Syar
    Offers Reprogramming/Replacement service - Cheaper than new mobo. Can't vouch for non uk service not used them. (1st off search engine)
    EU Recoverybios.com
    UK BiosflashUK
    US Badflash.com
            Back to Main nVidia Based Board Forum Index

  • How to clear ESCD ?

    Hi everyone,
    How to clear ESCD memory where there no this option in the BIOS ?
    I have 925EX Platinium & BIOS ver 1.5;
    problem: sound quality is horrible, with noise and buzzz in background
    (it's not depend on "mute" enable or disabele). When system staret is quiet.
    During playing any sound noise start.
    PSU repalced but no changes.
    Any idea ?
    regards,
    gRRuby

    Ohhh man ... read my post and ...a footer for detail of my box config )))
    BIOS is 1.5 of course
    I use latest Cmedia drivers ...
    https://forum-en.msi.com/index.php?topic=71994.0

  • How to downgrade BIOS on Satellite L650-11F

    hello there,
    i've just registered here but i've had my toshiba laptop for year and half now ,
    it's L650-11F PSK1JE
    my problem is the bios , i re-install windows every few months to keep the laptop fresh and fast and i download all new updates and drivers from Toshiba drivers page
    well i did 2 updates to bios from 2.00 to 2.20 and then to 2.40
    but since first update it seems to be messing my laptop
    DVDWR stopped burning DVDs
    Echo mode on battery don't setup says bios unsupported
    Graphics card fails so much in games now in FPS and very slow rendering in the games !!
    it's Radeon 5650 !
    not the best card right now but it's very good 1 still ( Playing Aion btw ) .
    i want to flash the Bios i wanna reset it to factury default or the bios comes with the laptop and i won't ever update it again ! it mess the laptop not improve it !
    i read tutorials how to downgrade bios but i'd rather ask here for more pro help
    thank you and i hope i get what i'm looking for i wanna reset this laptop and just download latest drivers

    > i re-install windows every few months to keep the laptop fresh and fast
    Many people think the same but especially fast has mostly nothing to do with BIOS update. If everything works well why to change anything and risk something.
    My notebook is 3 years old and I use it still with original BIOS. No problems at al. Anyway, I think you should contact nearest Toshiba service provider and explain the situation. Be clear and tell them that you are not happy now and you want to have old BIOS version again. They have access to BIS database and can obtain older version for you.
    ASPs phone number or address you can find on http://eu.computers.toshiba-europe.com/innovation/generic/ASP_SUPPORT/

  • How to clear CMOS on GX700

    How to clear the CMOS on GX700 laptop
    Iv done this a hundred times on a regular PC
    I must clear the cmos. NOT the EC. NOT the bios ......... THE CMOS.
    Please dont tell me i have to take this thing apart... Iv already looked under all the covers for the cmos Battery ....it must be really hidden
    Please just tell me how to clear the cmos.

    Quote
    It doesn't matter why.
    Oh, it may matter why, because there could alternative solutions to whatever problems you are trying to solve there that may be of importance to you because this...
    Quote
    Please dont tell me i have to take this thing apart...
    ... this is exactly what you will probably need to do (at least partly).  Check out the assembly guide for the GX700 and look on page 19.
    https://forum-en.msi.com/index.php?topic=123506.0
    Quote
    No answers yet!!
    I removed this line from your thread title.

  • How to clear completed reminders in iCal

    Has anyone figured out how to clear completed (checked done) reminders in iCal?

    Joe,
    That clarifies the question for me. Go to iCal>Preferences>Advanced and make your choices:

  • How to clear text fields when the user navigates back to the screen

    Hi,
    Does anyone have any idea on how to clear the text input fields and dropdown boxes when the user navigates back to the screen, say for e.g. create screen?
    My issue is that i have plenty of fields in the create screen within a form. Is there a way to avoid programaticaly blanking out every field and just do it at the form level using an api to reset to a state before the user entry?
    Thanks

    This code allows you to make it more generic, and you would need to tweak it if there are more than TextInput controls, but it should provide some ideas.
    As far as using states, you could use SetProperty to set the text to empty, but that might be messier.
    <?xml version="1.0"?>
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
      <mx:Script>
        <![CDATA[
          import mx.containers.FormItem;
          import mx.controls.TextInput;
          import mx.events.IndexChangedEvent;
          import mx.core.Container;
          private function clearSreen(evt:IndexChangedEvent):void{
            var view:Container = tn.selectedChild as Container;
            for each(var child:Object in view.getChildren()){
              if(child is FormItem){
                var subchild:DisplayObject = child.getChildAt(0);
                if(subchild is TextInput){
                  TextInput(subchild).text = "";
        ]]>
      </mx:Script>
      <mx:TabNavigator id="tn" resizeToContent="true"
        change="clearSreen(event)">
        <mx:Form id="frm1" label="View Number One">
          <mx:FormItem label="First name:">
            <mx:TextInput/>
          </mx:FormItem>
          <mx:FormItem label="Last name:">
            <mx:TextInput/>
          </mx:FormItem>
        </mx:Form>
        <mx:Form id="frm2" label="View Number Two">
          <mx:FormItem label="Address1:">
            <mx:TextInput/>
          </mx:FormItem>
          <mx:FormItem label="Address2:">
            <mx:TextInput/>
          </mx:FormItem>
          <mx:FormItem label="City:">
            <mx:TextInput/>
          </mx:FormItem>
          <mx:FormItem label="State:">
            <mx:TextInput/>
          </mx:FormItem>
          <mx:FormItem label="Zip code:">
            <mx:TextInput/>
          </mx:FormItem>
        </mx:Form>
      </mx:TabNavigator>
    </mx:Application>
    If this post answers your question or helps, please mark it as such. Thanks!
    http://www.stardustsystems.com
    Adobe Flex Development and Support Services

  • How to clear vendor open items with customer open items in APP?

    Hi Experts,
    Our vendor is our customer - in this scenario how to clear vedor open items against customer open items. I have defined vedor is customer means I have given customer number in vendor master record, selected chek box 'clear with customer'.  Still problem is not solved, hence I am requesting you to help me in this regard.
    Thank you very much,
    Regards,
    Ganesh.

    Hi
    In FBCJ after payment you have clear manually vendor balance in F-44.
    If you want SPL GL in FBCJ then write a Substitution .
    1. step 001 - Special G/L Substitution
    2. Prerequisite - Transaction code = 'FBCJ'
    3. Substitution posting key -- Exit (need help from abap) exit name
                                              G/L Exit (need help from abap) exit name
                                              Special G/L Ind Exit (need help from abap) exit name
    you can't do this without ABAP help
    Best Of Luck
    Tanmoy

  • How to clear vendor open items if vendor invoice currency and payment currency different

    Hi All.
    How to clear vendor open items through f-44 if vendor invoice currency is EUR , payment currency is USD  but local currency is INR
    while clearing through f-44 system showing error as "to large for clearing clearing is not possible"
    I checked all configuration, configuration wise no problem
    BR.
    Chandra

    Hi Chandra,
    You chose any one of the currency i.e. EUR/INR/USD for clearing in F-44. After selecting line items for clearing, system will show a difference. Click on over view button and manually write off the difference by selecting any one account i.e. dummy or small diff.account, after that click on process open items then system will show the difference 0 and simulate the document, here system will post gain/loss exchange GL postings along with other line items. After save the document, manually pass journal entry to dummy account and gain/loss account. I have explained clearly in the below example.
    Invoice is in USD - 1000 & INR - 60000
    Payment is in INR - 60000
    Now I am going to clear these in INR currency in F-44 on 31.03.2015. On this date the exchange rate for USD is 60.10. At the time of clearing system will post the below entry
    Vendor A/c Dr 60000 (invoice)
    Vendor A/c Cr 60000 (Payment)
    Gain from exchange rate A/c Cr  100 (60000 - 60100)
    Small diff.write off A/c (or) Dummy A/c Dr 100
    After done the above posting, we have to pass below manual JV in FB01
    Gain from exchange rate A/c Dr  100
    Small diff.write off A/c (or) Dummy A/c Cr 100
    Regards,
    Mukthar

  • How to clear the open documents in case if document currency and local curr

    Hi,
        Can anyboday advise how to clear the open document of a particular vendor for a particular company code. Here the issue is that balace is netted to Zero in the document currency but not in the local currency. The document was posted in Currency CAD and the local currency is GBP.
    When i check the FBL1N, there is it showing net balance is ZERO, but document is still in open
    status. I tried using Transaction code F-44, but it is not allowing me.
    Can anyboday advise how to perform this. Points will be awarded.
    Regards,
    Sree.

    Hi,
    In the Company code global parameters(OBY6),select the check box "NO FOREX RATE DIFF.WHEN CLEARING IN LC"
    and try clearing again.(You can have a F1 help on the check box to see what exactly it is).
    Hope this will resolve
    Assign points if useful
    Thanks
    Aravind
    Edited by: Aravind Aitipamula on May 22, 2008 1:36 AM

  • How to clear vendor open documents

    How to clear vendor open documents, I had previously tried to clear the documents in PRD with transaction F-44 and I get the following message.
    X. Ex.rate diff.accts are incomplete for account 00015080 currency CAD

    You can clear using the t code F-44 which is manual or by using F.13 which is automatic.
    The error you are getting is with refernce to a transaction between your Local currency and Currency "CAD"
    Maintain a transalation ratio and the exchange rate. Here the system also looks for a exchange loss or gain on such conversion also. Map those accounts and you will be clearing the transaction.
    If you are using automacti clearing you need to decide on the link(Common feild)  between the DR open item and CR open item and these open items after having this as a refernce can be cleared automatcially in F.13.
    Hope you understood.
    Reward points if useful.
    sarma

  • How to clear UWL items ?

    Hi,
    We are having so many entries or pending tasks in UWL of each user .
    How to clear them ? And I did not find any delete or remove button by selecting any entry .
    How to delete those entries one by one and all entries at once ?
    Thanks,
    Surya

    Hi,
    I hope you should clear them in workflow of backend .
    consult workflow forum
    Remove from transaction SWIA, choose logically delete on the highest
    level
    Koti Reddy

  • How to clear GR/IR account when criteria is not matching

    Hi All,
    I have issue in clearing GR/IR account done by F.13.  Criteria field XREF3 in Criteria 3 given is not matching in WE and RE, so I cannot clear, this happend to once particular GR/IR only.
    So how to clear this GR/IR when Criteria is not matching.
    Syam

    Hi,
    You can clear it manually using F-03. In that T-Code it is a manual clearing and not automatic clearing...so you can select any line items you want to clear, only thing is that their balance should be Zero.
    Regards,
    SAPFICO

Maybe you are looking for