How to clear import queue?

Hi All,
we are using WebAS 6.20 and we have a huge number of transports in our landscape.
The import queue of our systems therefore is quite big (several thousand transports) and slow.
I found an option "Delete Imported Requests".
But most of the transports get a yellow (ready for import again) or green (waiting to be imported) status after import and not an "already imported" status.
So the option above ignores them.
Any ideas welcome.
Thanks in advance,
Martin

Hi Martin,
Generally, you'll want to keep the list of transports shown in the queue short and leave the transport files out on in the transport directory for a longer period of time. But, that of course depends on how much space you have and the policies your company has for keeping files around.
Is this for a large installation of SAP?
Thanks,
J. Haynes

Similar Messages

How to clear outbound Queue in SXMB_MONI

HI Experts,
Unable to process the file in SXMB_MONI as a result the files are getting strucked with the QUEUE and now how to clear this queues for processsing the file...
and another i have configure the server with 611 client but while executing the client of the server is showing 001 and we didn't observe initially as it is working fine but when we observed now it is found
is this has an impact..
do we need to do any other certain configurations at the Server end..
regards,
Kishore

> There is no URL in SXMB_ADM, how to provide an url there, and even before we didn't get this problem as the files are successfully processsing for the past 3 months in PDN, and now we are getting this problem.
>
Hello,
I have understood your problem but you are not following the steps which we are mentioning here.
For your above problem you need to follow ONLY step no1 & 2 mentioned in the blog since steps are common for acitvating the proxy and thats way you are getting confused that why I am asking you to follow that blog.
In the blog step 1 will simply help you creat the RFC destination.
Step 2 will help you to use the above RFC destinaiton as an url.
In opionion if you resolve this problem first then it will be easier to solve your queue problem.
Please let me know if you need more help/clarification in this regard i will help you.
Regards,
Sarvesh

Who clear the import queue?

Hello,
The import queue at our site was cleared by someone. I recovered the queue from backup but would like to know if there is a way to discover who cleared the list?
TIA,
Yossef

There is more than one way how an import queue might have been deleted.
The file may have been deleted or emptied at OS level, by tp command or other operating system commands. Follow Rishi's advice to investigate further.
All the transports may have been deleted from the queue by means of transaction STMS. In this case you may find out from the transport protocols the time when this happened. Then you may find out who called STMS at that time by transaction STAD.
hope this helps

STMS: how to hide the Import All Requests button in the import queue view?

Hi All,
I'd like to know how to hide the "Import all requests" button in the import queue view.
Thanks a lot for your answers.
G.

Hi,
about hiding i have a doubt but u can inactivate by following procedure,
As referred in a thread:
On the domain controller, in STMS>overview>systems>(double click the one you want to change)>Select Transport Tool tab and click on change. Add Import_single_only value 1, import_single_strategy value 1 and no_import_all value 1. Save distribute and activate.
or
Refer to OSS NOTE 194000.
Thanks & regards.

UCM how to clear "Workflow Content Items In Queue"

Hi
How to clear "Workflow Content Items In Queue", if i click "Remove item from Queue" under Action also content item is remains in workflow queue.
How to fix it?
Thanks
Deepak

Hi Srinath,
I have checked the idc analyze. "check search index" is not running shows error. please check the log file below without selecting "check search index" other three(check database, check file system, generate report) ends with 0 errors. Is there any other solution to clear the workflow items?
Analyzing tables...
WARNING: Checking dRevClassID<->dDocName consistency can take several minutes on large repositories!
Finished checking 47 entries.
Errors Found: 0
Errors Fixed: 0
Analyzing filesystem...
Finished checking 47 entries.
Errors Found: 0
Errors Fixed: 0
Generate report
Number of items grouped by: dReleaseState
Workflow : 4
Old : 6
Current : 37
Number of items grouped by: dStatus
Edit : 2
Released : 43
Review : 2
Number of items grouped by: dProcessingState
Converted : 42
Metadata Only : 5
Number of items grouped by: dStatus, dReleaseState
Current and Released : 37
Workflow and Review : 2
Old and Released : 6
Workflow and Edit : 2
Thanks
Deepak

How to delete 100+ released requests from the import queue?

Hello
How to delete 100+ released requests from the import queue?
One by one or there is more convinient way?
Thanks

To delete multiple non-imported transport requests, you do the following while in the import queue on STMS:
1) Highlight the status field of the import queue.
2) Sort the import queue by the status.
3) Put your cursor on the first non-imported transport, right-click, and click on Select Block.
4) Scroll down and put your cursor on the last non-imported transport, right-click and click on Select Block. This will highlight all requests from the first one selection to the last one selected.
5) Go to menu option Request > Delete.
If all of the requests in the import queue haven't been imported (no imported, including failed import, requests), you can jump to Steps 3-5.

How do i clear the queue

Im try to clear the queue but it just says its deleting

Hi,
Which is the printer that ur using?
go hp.com and select your printer and download and run the HP print scan doctor and it will help you resolve the issue.
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

How can I stop it from uploading and clear the queue?

I'm having a hell of a time uploading these photos to my picasa account. After several attempts to get it working, it is now upload all 1,000+ photos and videos about 4 times. It's been going for almost 24 hours now and I just want to cancel and start over. Right now I can only pause uploading but I can't clear the queue. Any help would be greatly appreciated. Thanks.

I have to agree the reply came off a bit condesending. People are at all different level of tech competency and that is no reason to make others feel badly. Most of the people on the board are kind and helpful but others.
That's one thing I love about Major Geeks online they are always helpful and you can ask a "foolish" question and never made to feel badly by the people who are members and are just donating time to help others... it's really nice!
I don't automatically update for a month I want to make sure all the bugs are out and find out if there are any problems. I have dyslexia and do not always have time to get through all the information. The new rules and regulations is pages and pages long. And trying to read it on my Iphone 4s was awful. I finally gave up and just agreed. I am not concerned about Youtube as I am losing Google maps. It's not like they put Mapquest in, which is what I always check after Google to see if there is a better way to get where I am going.

Need to delete the SPAM requests from the import queue

Dear all,
There were some issues with my QA system SAP patch application and we were forced to do a DB refresh from our production system. Now our QA system ABAP stack is having an issue with the STMS import queue which shows 4 old patches(witch were applied to the system before the refresh) with u201Crequest will not be importedu201D status. When I try to delete these requests from the import queue it shows the following error
u201CThis is tp version 372.04.29 (release 700, unicode enabled)
ERROR: Client 'ALL' is not possible.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0246
standard output from tp and from tools called by tpu201D
When I try to import a new support package it gives the following error,
Error in phase: CHECK_REQUIREMENTS
Reason for error: QUEUE_NOT_EMPTY
Not sure how these requests arew still in the import queue even after the DB refresh. How can I delete these 4 old requests from the import queue?
The System is ECC6.0 ABAP+JAVA stack with Oracle 10g on Win2003 server.
Thank you,
Siju Sam

Dear Ganesh,
I have tried the steps you suggested, but still the import queue is not cleared.
Now I just wanted to remove these entires from the STMS=>queue=>import queue list.
Number   Request      Clt   Owner          Short Text
     1   SAPKB70013   ALL   SAPUSER        Basis Support Package 13 for 7.00
     2   SAPKA70013   ALL   SAPUSER        ABA Support Package 13 for 7.00
     3   SAPKB70014   ALL   SAPUSER        Basis Support Package 14 for 7.00
     4   SAPKA70014   ALL   SAPUSER        ABA Support Package 14 for 7.00
I think these requests(Patches) are not there in the tp buffer/(import queue) but somehow some table entries shows the status that they are still in the queue. So I just wanted to reset the status that These TPs are already applied.
Thank you,
Siju Sam

Cannot delete service pack in import queue

Hi all,
we restored our system and I want to apply some patches now. In SPAM I get an error that the queue is not empty.
I checked STMS and found a support package stuck in the import queue which we tried to upload before we restored the system.
I tried to delete it but the delete job get stuck while the taskbar shows "tp user check ok".
Can anyone give me a hint how I can free the import queue again?
Thanks in advance
Cornelius
Message was edited by:
Cornelius Goldhahn

I solved the problem.
I just give the answer in case anyone experiences a similar problem.
The thing was, that the file did not exist anymore but the queue was still blocked because the buffer was not cleared after the system was restored.
All I needed to do was to delete the file "<sid>" in the folder /usr/sap/trans/buffer and do a refresh in transaction STMS.
Hope this will help someone in the future
Cheers
Cornelius

How to clear text fields when the user navigates back to the screen

Hi,
Does anyone have any idea on how to clear the text input fields and dropdown boxes when the user navigates back to the screen, say for e.g. create screen?
My issue is that i have plenty of fields in the create screen within a form. Is there a way to avoid programaticaly blanking out every field and just do it at the form level using an api to reset to a state before the user entry?
Thanks

This code allows you to make it more generic, and you would need to tweak it if there are more than TextInput controls, but it should provide some ideas.
As far as using states, you could use SetProperty to set the text to empty, but that might be messier.
<?xml version="1.0"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
<mx:Script>
    <![CDATA[
      import mx.containers.FormItem;
      import mx.controls.TextInput;
      import mx.events.IndexChangedEvent;
      import mx.core.Container;
      private function clearSreen(evt:IndexChangedEvent):void{
        var view:Container = tn.selectedChild as Container;
        for each(var child:Object in view.getChildren()){
          if(child is FormItem){
            var subchild:DisplayObject = child.getChildAt(0);
            if(subchild is TextInput){
              TextInput(subchild).text = "";
    ]]>
</mx:Script>
<mx:TabNavigator id="tn" resizeToContent="true"
    change="clearSreen(event)">
    <mx:Form id="frm1" label="View Number One">
      <mx:FormItem label="First name:">
        <mx:TextInput/>
      </mx:FormItem>
      <mx:FormItem label="Last name:">
        <mx:TextInput/>
      </mx:FormItem>
    </mx:Form>
    <mx:Form id="frm2" label="View Number Two">
      <mx:FormItem label="Address1:">
        <mx:TextInput/>
      </mx:FormItem>
      <mx:FormItem label="Address2:">
        <mx:TextInput/>
      </mx:FormItem>
      <mx:FormItem label="City:">
        <mx:TextInput/>
      </mx:FormItem>
      <mx:FormItem label="State:">
        <mx:TextInput/>
      </mx:FormItem>
      <mx:FormItem label="Zip code:">
        <mx:TextInput/>
      </mx:FormItem>
    </mx:Form>
</mx:TabNavigator>
</mx:Application>
If this post answers your question or helps, please mark it as such. Thanks!
http://www.stardustsystems.com
Adobe Flex Development and Support Services

How can I import my bookmarks and RSS feeds from Flock?

I just switched over from Flock because it's too sluggish to use anymore. How do I import all my bookmarks, passwords, and RSS feeds? If I have to do it all by hand, I'm going to cry.
Also do I need a separate RSS reader to get my feeds in a nice list like Flock does it? I don't really get how Live Bookmarks are supposed to work.
Thanks. I used Firefox before moving to Flock, so hopefully switching back won't be too painful.

Hm. This was somewhat helpful. I got my bookmarks moved (although now that I see how many of them I had backed up, I'm not sure that was a good idea).
Still trying to figure out the passwords... I have my Flock profile folder and my Firefox profile folders open... it looks like I need to copy the key3.db file and the signons.sqlite file from the Flock folder to the Firefox folder, does that sound correct?
As for the RSS feeds, it looks like I'll need an external reader to make any use of the .OPML file that Flock exported for me. I'm still not really clear on how Live Bookmarks work, exactly. I see how to create and manage them, I just don't get how they function day to day. I have a ridiculous number of RSS feeds, some of which still have half a hundred posts I'm working my way through.
Any recommendations for a good Firefox compatible feed reader?
Thanks!

How do i import contacts from my hotmail account

how do i import contacts from my hotmail account? Every time i try, there's a message that keeps popping up saying that it can't do because the contacts aren't separated by commas...????? Please help, i'm a recent "switcher"
thanks

The short answer, for now, is you don't. It's increasingly clear that Microsoft does not want to extend this privilege to users of free HotMail accounts, not does it want to offer POP3 access to anyone other than paying HotMail Plus users at this point, and for the foreseeable future. And, IMAP: that's out of the question, apparently.
While the plugin idea is a nice one, the referenced open-source HTTPMail plug in is broken by Mac OS X 10.5, and nothing has been heard to date from the developer about an update to support Mail in Leopard.

How to clear tab settings in Designer in 7.0

I imported an existing form and added text fields/drop downs, etc. I used copy/paste throughout. When I went to set tab order there are in some cases 3 or 4 numbers beside a single field and even straight text fields are numbered. I can't figure out how to clear all of these out so that I can properly set the tab order. When I did advanced>accessibility>full check in the form in acrobat it said that "WARNING: Since the PDF file contains Adobe XML form fields, you must use Adobe Designer to repair errors" and "All of the pages in this document have tab order that may be inconsistent with the structure order".
I am brand-new to using this software so as detailed an explanation as possible would be greatly appreciated.
Thanks!

Hello Devi,
There are three ways you can load Master Data in BPC
1) Copy and paste.
Download master data in flat file .Copy the master data and paste in members of dimension after that process the dimension.
2) Using SISS Pakage - load Flat File into BPC-Cube
3) Using SQL Command.
Thanks.
With regards,
Anand Kumar

How to clear the text in the Text Editor

Hi all,
I created a Text editor and also i am having language field in the screen.
whenever i change the language auomatically the text has to change when the text exists for that
language.
this is working fine, but when the Text exist , the text editor should be blank.
But it is carrying the Previous editor text itself into it .
How to clear the text in the Editor.
Regards,
Madhavi

Hello Madhavi
The simple report ZUS_SDN_TEXTEDIT_CONTROL shows how to switch the texteditor contents when changing the language.
*& Report ZUS_SDN_TEXTEDIT_CONTROL
*& Thread: how to clear the text in the Text Editor
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1145272"></a>
*& By default the itab GT_OUTTAB contains texts in DE and EN.
*& To switch the language directly enter into the command window:
*& LANGU=DE, LANGU=EN or LANGU=FR
REPORT zus_sdn_textedit_control.
TYPE-POOLS: abap.
TYPES: ty_t_text     TYPE TABLE OF as4text
                     WITH DEFAULT KEY.
TYPES: BEGIN OF ty_s_outtab.
TYPES: language TYPE spras.
TYPES: text     TYPE ty_t_text.
TYPES: END OF ty_s_outtab.
TYPES: ty_t_outtab    TYPE STANDARD TABLE OF ty_s_outtab
                      WITH DEFAULT KEY.
DATA: gt_outtab       TYPE ty_t_outtab,
      gs_outtab       TYPE ty_s_outtab.
DATA: gd_language     TYPE spras.
DATA: go_docking      TYPE REF TO cl_gui_docking_container,
      go_textedit     TYPE REF TO cl_gui_textedit.
DATA: gd_okcode       TYPE ui_func,
      gd_repid        TYPE syst-repid.
START-OF-SELECTION.
PERFORM fill_texts.
gd_language = syst-langu.
PERFORM init_controls.
* Link the docking container to the target dynpro
gd_repid = syst-repid.
CALL METHOD go_docking->link
    EXPORTING
      repid                       = gd_repid
      dynnr                       = '0100'
*      CONTAINER                   =
    EXCEPTIONS
      OTHERS                      = 4.
IF sy-subrc NE 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM set_text_editor.
* NOTE: dynpro does not contain any elements
"       ok-code => GD_OKCODE
CALL SCREEN '0100'.
* Flow logic of dynpro (does not contain any dynpro elements):
*PROCESS BEFORE OUTPUT.
* MODULE STATUS_0100.
*PROCESS AFTER INPUT.
* MODULE USER_COMMAND_0100.
END-OF-SELECTION.
*&      Module STATUS_0100 OUTPUT
*       text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'. " contains push button "DETAIL"
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE user_command_0100 INPUT.
TRANSLATE gd_okcode TO UPPER CASE.
CASE gd_okcode.
    WHEN 'BACK' OR
         'EXIT' OR
         'CANC'.
      SET SCREEN 0. LEAVE SCREEN.
    WHEN 'LANGU=DE' OR
         'LANGU=EN' OR
         'LANGU=FR'.
      PERFORM get_text_editor.
      SPLIT gd_okcode AT '=' INTO gd_okcode gd_language.
      PERFORM set_text_editor.
    WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Form FILL_TEXTS
*       text
* --> p1        text
* <-- p2        text
FORM fill_texts .
* define local data
DATA: ld_string   TYPE string.
gs_outtab-language = 'EN'. REFRESH: gs_outtab-text.
ld_string = 'Good morning'.
APPEND ld_string TO gs_outtab-text.
APPEND gs_outtab TO gt_outtab.
gs_outtab-language = 'DE'. REFRESH: gs_outtab-text.
ld_string = 'Guten Morgen'.
APPEND ld_string TO gs_outtab-text.
APPEND gs_outtab TO gt_outtab.
gs_outtab-language = 'FR'. REFRESH: gs_outtab-text.
ld_string = space.
APPEND ld_string TO gs_outtab-text.
APPEND gs_outtab TO gt_outtab.
ENDFORM.                    " FILL_TEXTS
*&      Form INIT_CONTROLS
*       text
* --> p1        text
* <-- p2        text
FORM init_controls .
CREATE OBJECT go_docking
    EXPORTING
      parent                      = cl_gui_container=>screen0
*      repid                       =
*      dynnr                       =
*      side                        = dock_at_left
*      extension                   = 50
*      style                       =
*      lifetime                    = lifetime_default
*      caption                     =
*      metric                      = 0
      ratio                       = 90
*      no_autodef_progid_dynnr     =
*      name                        =
    EXCEPTIONS
      cntl_error                  = 1
      cntl_system_error           = 2
      create_error                = 3
      lifetime_error              = 4
      lifetime_dynpro_dynpro_link = 5
      OTHERS                      = 6.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_textedit
    EXPORTING
*      max_number_chars       =
*      style                  = 0
*      wordwrap_mode          = wordwrap_at_windowborder
*      wordwrap_position      = -1
*      wordwrap_to_linebreak_mode = false
*      filedrop_mode          = dropfile_event_off
      parent                 = go_docking
*      lifetime               =
*      name                   =
    EXCEPTIONS
      error_cntl_create      = 1
      error_cntl_init        = 2
      error_cntl_link        = 3
      error_dp_create        = 4
      gui_type_not_supported = 5
      OTHERS                 = 6.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " INIT_CONTROLS
*&      Form SET_TEXT_EDITOR
*       text
* --> p1        text
* <-- p2        text
FORM set_text_editor .
BREAK-POINT.
CLEAR: gs_outtab.
READ TABLE gt_outtab INTO gs_outtab
       WITH KEY language = gd_language.
CALL METHOD go_textedit->set_text_as_stream
    EXPORTING
      text            = gs_outtab-text
    EXCEPTIONS
      error_dp        = 1
      error_dp_create = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " SET_TEXT_EDITOR
*&      Form GET_TEXT_EDITOR
*       text
* --> p1        text
* <-- p2        text
FORM get_text_editor .
CLEAR: gs_outtab.
CALL METHOD go_textedit->get_text_as_stream
    EXPORTING
      only_when_modified     = cl_gui_textedit=>true
    IMPORTING
      text                   = gs_outtab-text
*      is_modified            =
    EXCEPTIONS
      error_dp               = 1
      error_cntl_call_method = 2
      OTHERS                 = 3.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
MODIFY gt_outtab FROM gs_outtab
    TRANSPORTING text
    WHERE ( language = gd_language ).
ENDFORM.                    " GET_TEXT_EDITOR
Regards
Uwe

How to clear import queue?

Similar Messages

Maybe you are looking for