How to clear memory in MVC when exiting from application using BACK ?

Hi Friends ,
I am using the JavaScript back function to exit from my application to the calling page . My BSP application is stateful and MVC based . I am calling my application using the SYSTEM application sample pages for session management - session_single_frame.htm & session_default_frame.htm .
I am observing that if i run my application in Portal whenever i hit back ..i do return to the calling page but again if i come to my BSP application the old data is seen . If i do the testing outside portal environs it is cleared ..i believe as the session close popup is seen and executes completely .But within portal as the popups are not enabled may be the session clean up is not happening .
How can I overcome the situation . i dont want to exit as i want the user a way to go back to the calling page directly .
Appreciate your help in advance.

it could be because of the caching property of the BSP iview.
set "Allow Client-Side Caching" of BSP iview to "NO" and try.
Regards
Raja

Similar Messages

IPAD 16 GB HOW TO CLEAR MEMORY

IPAD 16 GB HOW TO CLEAR MEMORY ios7

What do you mean by 'clear memory' ?
You can close apps via the iPad's taskbar (a lot of the apps that show on the taskbar will just be 'recently used', they won't be using resources) : from the home screen (if you have an app 'open' on-screen then it won't show on the taskbar for closing) double-click the home button to bring up the taskbar at the bottom of the iPad's screen, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the iTunes app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If you want to delete content from your iPad to free up storage then you can see how much space each app is taking up via Settings > General > Usage. To delete an app (and therefore its content) press and hold any of the apps on your iPad’s homescreen and after a couple of seconds or so they should start to shake. Then press the 'x' in the left corner to delete the ones that you don't want, and when you've finished deleting press the home button so as to stop the shaking. If you don't get the 'x' on any of the apps that you've downloaded (you can't delete built-in apps) then check that Settings > General > Restrictions > Deleting Apps isn't set 'off'.
To do a soft-reset (i.e. a reboot) : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear.

How to clear GR/IR account when criteria is not matching

Hi All,
I have issue in clearing GR/IR account done by F.13. Criteria field XREF3 in Criteria 3 given is not matching in WE and RE, so I cannot clear, this happend to once particular GR/IR only.
So how to clear this GR/IR when Criteria is not matching.
Syam

Hi,
You can clear it manually using F-03. In that T-Code it is a manual clearing and not automatic clearing...so you can select any line items you want to clear, only thing is that their balance should be Zero.
Regards,
SAPFICO

How the ASR memory options shipped when bought as spares?

Does anyone knows how the ASR memory options shipped when bought as spares?
Can i insert a 2GB memory on the ASR 1002-X as stated in the memory options in this link, http://www.cisco.com/c/en/us/products/collateral/routers/asr-1000-series-aggregation-services-routers/data_sheet_c78-441072.htmlIf yes, then what could be the part code number?
Can I just upgrade the ASR 1002-X from 4GB to 6GB of memory instead of 8GB?
Can you clarify if i will choose the following part codes, how will this be shipped?
M-ASR1002X-4GB=, 2 units 2GB memory or 1 unit 4GB?
M-ASR1002X-8GB=, 4 units 2GB memory or 2 units 4GB?
M-ASR1002X-16GB=, 4 units 4GB memory?
And last, how can we insert memory on the ASR 1002-X, does it needs to have identical memory installed for the 4 slots, or we can just upgrade it like, 2 x 2GB installed on the first slot and then i'll add 1 x 4GB?
Thank you!

Hello, Jessica.
The Cisco 1000 ASR series RP memory spares are usually sold as pairs. For example, 2GB (M-ASR1K-RP1-2GB=) are sold as a pair of 1 GB modules and the 4 GB memory spare (M-ASR1K-RP1-4GB=) is sold as a pair of 2 GB modules. It would be best to verify this with your Cisco sales representative. Are you already working with any Cisco partner or rep about this one, by the way?
Let me know if you have additional concerns or e-mail ([email protected]) me directly. Kind regards.

How do I maintain column formatting when converting from PDF to Excel?

How do I maintain column formatting when converting from PDF to Excel? All info is no longer on the lines or in the columns they started out being in? Any help would be appreciated.

Sara,
Perhaps I am expecting too much from Adobe ExportPDF. The reason I subscribed to this service, for which I pay a yearly fee, was that I need a way to convert scanned and digital documents to Word &/or Excel. I read the link you included but to be candid the more I tried to understand what was written the more confused I got. The process should not be this difficult. Currently I am using a NEAT scanner to create PDF documents of whatever I scan. After I changed the OCR setting on Adobe ExportPDF the output was much better but not to the point it was usable as it was. Information that appears to be lines and columns are sometimes not recognizing two columns and just putting them together in one. Obviously not usable. The other thing it does is bunch numbers that appear in a column that are just a bunch of numbers that I have no way of fixing.
Please let me speak to someone who can help me. Right now I not getting anything of value in my paid subscription.

How do I turn AppleTV off when I'm not using it?

How do I turn off AppleTV when I'm not using it?

It actually goes to sleep instead of powering off. Apple TV only uses 6 watts of power. That would mean 10 Apple TVs would consume the same amount of power as one 60 watt bulb and that's when it's on (not in the sleep mode).
You can set it to go to sleep after 15 min., 30 min., etc. of inactivity in settings. I think the default is 15 min. That doesn't include watching a movie. You can also put it in the sleep mode in settings, but the easiest way is with the remote.
Hold the Play/Pause button on the reomte for 5 secs to put it to sleep. This only works from the main menu. To go to the main menu quickly, hold the menu button for 3 secs.
Source

How do I save "Sent" messages when sending from the ipad

How do I save "Sent" messages when sending from the ipad2?

By default sent items should be saved in your Sent folder. For IMAP type accounts you should be able to change that by selecting the account in Settings > Mail, Contacts, Calendars , then selecting 'Account' on the popup for it and then 'Advanced' at the bottom of the next popup

HT4101 How is the photo size affected when importing from the SD card to ipad (2) ?

How is the photo size affected when importing from the SD card to ipad (2) ?
If they stay the same, any options I can have to "re-size" the photos so that I could use it for a photo storage when traveling?
Thanks.

To re-size, you can use:
https://itunes.apple.com/sg/app/simple-resize/id327776379?mt=8

How to improve quality of pdfs when exporting from pages?

how to improve quality of pdfs when exporting from pages? Any suggestions?

Print to pdf and don't use anything with transparency.
Have you ensured all your images are actually high enough resolution for whatever purpose (which you haven't said) you want?
Peter

How can I keep the formatting when converting from Word to pages?

How can I keep the formatting when converting from Word to pages?

Use only formatting that is supported (in the same manner) in both applications. You'll need to find which that is through trial and error. Beyond those formatting options, you'll need to do some corrections, as Fruhulda suggests.
Regards,
Barry

How do you leave your iMac when you're not using it?

Just curious..
Hey All..
I have a 24" iMac 2.8 with a 750GB Hard Drive. I tend to leave it on all the time shutting it down over night probably once a week. I have my settings to turn the display off after 5 minutes and turn off the hard disks "when possible". I just wondered if this was healthy or will it shorten the life expectancy of my pride and joy? I must admit that I do like to leave it on all the time. I leave my Time Capsule on all the time too...should I perhaps shut this down also?
I have the Applecare program which gives me some piece of mind with my iMac.
I'd be delighted and interested to hear how you all 'leave' your iMacs when you're not using them.
Kind regards..
~RICKY

I have my system plugged into a UPS and generally leave it sleeping. There's a window where I have it scheduled to wake up and then sleep again, but it I otherwise sleep it.
I suspect that sleep probably puts the least wear on your machine and is safe if you have a UPS. FWIW, an early 2007 24" iMac draws 3W of power when it's off, and 10W or so when asleep ( the newer models use less than 6W). During the boot process, power consumption will go 200-220W for ~1 minute. Normal usage it consumes about 100W. Idling, the machine will use between 70-100W depending on the screen brightness, and about 45W if the display is off and machine is idle. Playing something like WoW brings the power consumption up over the 200W mark.
The mechanical parts wear proportional to the number of times they are used (physical switches), and the electronic parts wear mostly based on the the result of cycles of temperature changes / surges of voltage. Pressing the power-button to power-on the Mac probably puts the most wear on the unit as a whole. That said, under normal circumstances you are not likely to put enough wear on anything but the hard disk to have it fail.

How to append paragraph in text file of TextEdit application using applescript

how to append paragraph in text file of TextEdit application using applescript and how do i save as different location.

christian erlinger wrote:
When you want to print out an escape character in java (java is doing the work in client_text_io ), you'd need to escape it.
client_text_io.put_line(out_file, replace('your_path', '\','\\'));cheersI tried replacing \ with double slash but it just printed double slash in the bat file. again the path was broken into two lines.
file output
chdir C:\\DOCUME~1\
195969\\LOCALS~1\\Temp\
Edited by: rivas on Mar 21, 2011 6:03 AM

HT201269 I restored my iphone and now it has gone back to factory settings. How do I transfer all the purachsed items from my itunes back onto the phone?

I restored my iphone and now it has gone back to factory settings. How do I transfer all the purachsed items from my itunes back onto the phone?

Hello whytea4
Check out the articles below and choose the one for your computer to sync media and apps to your iPhone.
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12113
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/PH12313
Thanks for using Apple Support Communities.
Regards,
-Norm G.

How to emabed BI Publisher report to a different application using GO URL

Hi all,
How to emabed BI Publisher report to a different application using GO URL.
I put the BI Publisher report in dashboard and create a go url but the problem is it is showing top header and all dashboard names present in my dashboard.
I want to show only report.
If we do a GO url of answers requst it shows only report . Same way can we do for BI publisher request.
Thanks

10g or 11g?
for any you can get the link from BIP report properties. and use that link

HT2693 How to activate cellular data on iphone5 bought from japan using globe nano prepaid sim here in the philippines.

How to activate cellular data on iphone5 bought from japan using globe nano prepaid sim here in the philippines.

joanmacedonio wrote:
How to activate cellular data on iphone5 bought from japan using globe nano prepaid sim here in the philippines.
You cannot. No Japanese carrier offers unlocking. You'll need to sell the phone and buy one you can actually use outside of Japan.

How to clear memory in MVC when exiting from application using BACK ?

Similar Messages

Maybe you are looking for