How to clear out all passwords in key chain

HAVING TROUBLE WITH POP UP BOX IN AOL EMAIL CONSTANTLY ASKING FOR MY PASSWORD..HOW DO I CLEAR

That pop-up occurs whenever you cannot immediately get a good connections to the Mail Server. If it is down, or is slow, or the connection is not so good today. Your Mac cannot see the fine distinction, it just asks for the one thing it knows -- no answer from the Server -- maybe the password is wrong.
Your best bet when that happens is to hit cancel -- and take that account Online again later. At some point make sure the
Mail > preferences > accounts ...
... for that account has the right passwords in it.

Similar Messages

How to clear out all contacts

My iPod has accumulated lots of entrees that have been auto-created by flaws in the iMac address book. The iMac Address Book has since been cleaned out. Now I need to trash all entrees in the iPad so I can sync it to the good iMac Address book. is there a way?

iTunes 10.2.2 Info shows one button 'All contacts'. Others to sync Yahoo or Google. Nothing labeled 'replace'.
Scroll down to the bottom.
The iMac Address Book has since been cleaned out.
Is your computer set to sync contacts with MobileMe? It should be.
If so the contacts should have been changed on the iPad when you changed them on the computer.
With MobileMe, changes on any device sync'd to MobileMe, will change the data on all other devices sync'd to MobileMe.
Make sure your computer is set to sync contacts to MobileMe.
For the ccomputer, see this -> MobileMe: How to reset sync data
For the iPad see this -> MobileMe: Troubleshooting iPhone, iPad, or iPod touch sync issues

My fonts are changing in iWed after I publish. I need step by step instructions on how to go to my third party server and clear out all of my files and reload my whole website, the solution I saw posted by another. Please someone help me on this. Urgent

My fonts are changing in iWed after I publish. I need step by step instructions on how to go to my third party server and clear out all of my files and reload my whole website, the solution I saw posted by another. Please someone help me on this. Urgent

If your fonts are changing when viewed on other computers - epecially those running windows - you need to look at using web-safe fonts...
http://www.iwebformusicians.com/iWeb/Fonts-Colors.html
Also make sure you clear your browser cache before viewing you published files.

My Iphone 5s message is showing it has a message but it doesnt. ive cleared out all messages, ive turned it off then on again how do I get rid of it with out having to reset my phone?

My Iphone 5s message is showing it has a message but it doesnt. ive cleared out all messages, ive turned it off then on again how do I get rid of it with out having to reset my phone?

just do a reset, you lose no data.
hold down the home/sleep button together until you see the apple logo and then release.

How to clear out Launchpad in Mavericks?

Does anyone know how to clear out and remove all the app icons from Launchpad in Mavericks?
Used to be able to use this code in terminal to clear it out:
sqlite3 ~/Library/Application\ Support/Dock/*.db "DELETE from apps; DELETE from groups WHERE title<>''; DELETE from items WHERE rowid>2;"; killall Dock
But it doesn't work anymore in Mavericks. Any ideas?
I don't want to actually delete anything, just remove all the icons from Launchpad because I never use Launchpad and it's annoying.
Thanks

hipdeejay wrote:
I've done that. But you press the Launchpad key and all the icons pop up.
So you simply want a blank sceen to pop up?
Don't press the Launchpad key.
Or turn the Launchpad key off.
System prefs > Keyboard - Shortcuts.
Select Launchpad & Dock and uncheck Launchpad.

How to find out the password of system?

Dear all,
I would like to know how to find out the password of system as I forgot it?
Thanks a lot
Francis SZE

Since oracle passwords are encrypted so you cant see actual password. But you can use following procedure to login to oracle with system user.
For any account issue this statement.
select username,password from dba_users where username='SYSTEM';
EMDU27ANS729273
this will give you the password in encrypted format.
Now you can change that password for temporary purpose.
alter user system identified by test;
Now login and do your work.
After login you can issue this statement to reset the password to its original value.
Alter user system identified by values 'EMDU27ANS729273';
You have to enter the same encrypted password in the quoted string which you had found in 1st statement.
Cheers.

I need to clear out all the data on my phone so I can give it to someone

I need to clear out all the data on my phone so I can give it to someone

There are two ways you could do this.
1. Go to settings>general>reset then select the option "erase all content and settings"
2. Restore to factory settings with iTunes on a PC/Mac. The article below can show you how to do this:
http://support.apple.com/kb/ht1414
Hope this helps

It keeps saying running out of disk space need to delete some photos and videos but i already cleared out all my photos and videos and it keeps saying the same thing

it keeps saying running out of disk space need to delete some photos and videos but i already cleared out all my photos and videos and it keeps saying the same thing.

Connect the iPod to your computer. Click on the iPod under Devices and iTunes. How large is the "other" category as shown in the colored bargraph? If larger than about 3/4 GB, restore the iPod. That large of "other" indicates corrupted files.

How to find out all user exits edited

Hi All,
Would you know how to find out all user exits have been ever edited?
Can we find out those user exit by some tcode or table?
Thank you very much
Best Regards,
Calvin
Edited by: Sam Sum on Mar 2, 2009 5:09 AM

Hi,
Just try this in your system.
Go to SE38 and give ZX* and press F4.
Have a look at table MODATTR to find the active projects in your system.
Regards
Edited by: Rajvansh Ravi on Mar 2, 2009 5:17 AM

How to find out all active instances in a syste

How to find out all active instances in a system

Go to your basis team and ask them, as far as i know there is no other way then suggested in the other answer, but that is not a complete picture, And that is as designed, why should one want to be able to find out, the basis consultant will tell you!

TS1702 how do i find all passwords i have used with my apple id

how do i find all passwords that i have used for my apple id

Other than remembering them, you can't.

How can I avoid that a virus read out all passwords memoried by Firefox? It was happend two weeks ago!

My children where using some web sites about games to solve some problems. During this use a virus came via web interface into my desktop. My virus scanner shows this but could not avoid that this virus read out all my accounts memorized in Firefox and sent it into dark channels.
I could restore the way how my accounts leave my Desktop. There was some accounts only memorized into Firefox inclusive passoword. These accounts would used from other persons in the meantime.
My questions are:
- How save are the memorized accounts-password combinations?
- And: Is it possible that the Firefox Sync Account can transfer the virus from PC to PC by using the same Sync-Account? Or can I be sure that all other Firefox installations at other PSs will be clean after this attack at one Firefox-Installation during all installations use the same Sync-Account? What this question means in background: Via Sync can Plugins be installed at other systems. What happens, when a virus install a special virus-plugin? Would Sync it move to all other PCs?
Best regards, Frank

If you are using Sync to sync passwords then you likely aren't using a Master Password to protect the password.
*https://support.mozilla.org/kb/Protecting+stored+passwords+using+a+master+passwor
If you suspect such a virus infection then you should cleanup your computer and change all the compromised passwords immediately.
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware

How can I clear out all smart tags?

I just upgraded from Photoshop Elements 6 to Elements 10. In the Elements 6 release you can do a FIND on all untagged items, so I can easily find all pictures that I have not yet gotten around to tagging.
On Elements 10 I find that the software has automatically added a "Smart Tag" tag to ALL of my pictures, making the FIND UNTAGGED useless. I assumed this happened when I converted my catalog. I have now gone back and disabled the Smart Tag feature (now that I know about it) so that new pictures will NOT get Smart Tegged. However, my database of tens of thousands of pictures has been contaminated by Smart Tags.
Is there anyway to get all the Smart Tags cleared out of the database so I can find the pictures that I have not yet manually tagged?
Alternately, is there a way to find pictures that have a Smart Tag but no manual tag?

photodrawken wrote:
Excellent! Glad you found a solution.
msrecant wrote:
However, it appears to me that as soon as one enables the Smart Tag feature the "Find untagged items" feature becomes almost meaningless.
Absolutely right. Although Smart Tags are automatically generated, as far as the database is concerned, for the images they are tags just like any other tags.
Ken
This time, even if it's not exactly a bug, it is a disastrous default setting.
All autoanalyzer functions should be disabled by default, and only enabled knowingly.
The other lesson is that the Find menu should be able to search for files without a tag while ignoring the 'smart' tags.
The fact that the option to 'remove tags from selected items' cannot be used when you have to many tags (only one page display of tags, without a way to scroll down to next screen) is a bug in my opinion.
http://forums.adobe.com/thread/1035239?tstart=0

I don't get "Manage my Account" when I select the Sync tab, but if I try to create a new account it says my userid is already in use. How can I get my password & sync key?

My OS is Windows 7 Home Premium.
My Firefox version is 4.0.1.
When I try to setup Firefox Sync, I get a choice of "Create a new account" or "Connect".
The first tells me my email address is already in use, but selecting the Sync tab does not give me "Manage my Account."
How can I find out my password and sync key?

Hi Russ!
Apparently you already configured your account but you don't have nor the key or the password. You can get the password in the [https://account.services.mozilla.com/forgot following link] but you would need the Sync Key to sync your device to the rest of your devices.
If you don't have the Sync Key the best thing you can do is to reset it, by deleting the previous account and creating a new one with the same user. You can perform this tasks from your [https://account.services.mozilla.com/ account dashboard].

How to clear out foreign divested entities at Parent Currency when have CFCTA?

We have stopped loading some entities which we divested in the prior fiscal year (2013). Now, in the current fiscal year (2014), the Retained Earning rollforward logic is carrying forward the prior year P12 ending balance. We can manually adjust out the figures in Enitity Currency in P1 of current year (July 2014) and clear out the ending RE balance, but we still have RE remaining at Parent Currency due to roll forward logic. Our journals in HFM always reverse in the next period, so it seems that we will need to forever more book an adjustment in Parent Curr Adjs to clear out the RE and the Cumulative Foreign Currency Translation amount. Has anyone had a similar issue? How did you remove all Retained Earnings at the Parent Currency levels when you got rid of a company? Thank you.

Just about every application I've seen has always had some form of rule allowing for historical translation overrides for the equity section. Some do it by allowing you to adjust the rate the equity is translated at, others do it by allowing you to enter the PC amount you want in EC in a seperate account (Dollar Overrides seems to be a common term) but either way, you'll need that functionality to accomplish this.
Basically your rules are causing the problem(prior year USD copying across to current year USD), so your rules will need to be the solution.

How to clear out all passwords in key chain

Similar Messages

Maybe you are looking for