How to clear spinning gear in outbox on iPad's mobile yahoo webmail?

The gear started spinning, I believe, when I was sending a message out just as the servers might have blipped with a thunderstorm coming on. That's all I see in the outbox, the gear spinning.
I can still send messages, even with that gear spinning. To be clear, this isn't the Yahoo mobile mail app. I'm accessing the mobile version of Yahoo's webmail through 1Password. My email address is actually with att, which uses the yahoo servers.
I've signed in and out of my account. Put the iPad into and out of Airplane Mode. I've reset the iPad by pressing the Home and sleep/wake button at the same time; all with no luck. The spinning gear isn't there in any outbox when I access the webmail through my MacBook Pro.
I've written to Yahoo, no response. Don't see anything on the att email help pages that's helpful.
Thanks for any clarification you can offer!

Definitely contact apple software support -
Problems like you are having do not get fixed unless they are reported.
True of all IT - problems not reported do not get fixed.  Software Company Testers and Beta Testers may not catch problems because they are IT savvy as opposed to the majority of users who find many bugs and problems simply by using systems day to day.

Similar Messages

  • How can I upload a doc from my ipad to a yahoo group or a google group?

    I need to upload files to a Yahoo group and a Google group and also download files from those groups. I can download a doc attached to an email and edit that doc. I can then email it. But I cannot upload a file, though it asks if I want to upload a photo.

    Yes, iOS and Safari support uploading only Photos. I've not used it so this is not an endorsement, but others have reported that the iCab mobile browser has this feature though.

  • Downloaded movies don't streamwithout multiple stoppages for "spinning gear."

    Downloaded movies from iTunes to my computer don't stream without multiple stoppages for "spinning gear". I have to mess with remote fast forward and then fast backward and then Pause and often have to do that multiple times to clear spinning gear and get movie going again. A few minutes later, the spinning gear appears again.   What does it take to get it to stream without interruption?

    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

  • My "other" file is stealing my storage space and my local apple store has no idea how to find out what is in it let alone how to clear it so I can upgrade to iOS 7. He thinks my iPad is not really deleting things but storing it here.

    My "other" file is stealing my storage space and my local apple store is aware of the problem but has no idea how to view it's content or how to empty it. He thinks my deleted files are going here instead of being deleted. Raw beginner here! Need help.

    How much space is used by your Other? You may be able to reduce.
    How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
    http://tinyurl.com/85w6xwn
    How to Remove “Other” Data from iPhone, iPad and iPod Touch
    http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/
    With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
    What is “Other” and What Can I Do About It?
    https://discussions.apple.com/docs/DOC-5142
    iPhone or iPad Ran Out of Storage Space? Here’s How to Make Space Available Quickly
    http://osxdaily.com/2012/06/02/iphone-ipad-ran-out-of-available-storage-space-ho w-to-fix-quick/
    6 Tips to Free Up Tons of Storage Space on iPad, iPhone, and iPod Touch
    http://osxdaily.com/2012/04/24/6-tips-free-up-storage-space-ipad-iphone-ipod-tou ch/
    Also,
    How to Clear Message/iMessage Cache on iPhone & iPad And Reclaim Lots of Free Space
    http://www.igeeksblog.com/how-to-clear-message-imessage-cache-on-iphone-ipad/
     Cheers, Tom

  • Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?

    Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
    a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
    How to back up and restore your files
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    How to use and troubleshoot FireWire target disk mode
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 3
    Boot in safe mode.* The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 4
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 5
    Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
    Step 6
    Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
    Step 7
    Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
    Step 8
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

  • How to go to finder from blank grey screen with apple icon and spinning gear

    My Mac desktop won't start up,  it showed blank grey screen with an apple icon and spinning gear for ages. Due my computer is vintage so I would need to backup my user files before I could re-install OS X via NetBoot. My question is how can I access to the finder to back up my user folder from the grey screen.  Thanks

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • My imac won't startup past the spinning gear and my apple keyboard is wireless but it won't connect, how do I fix the problem so I can get into safe mode?

    My imac won't startup past the spinning gear and my apple keyboard is wireless but it won't connect, how do I fix the problem so I can get into safe mode?
    Can anybody help me on this issue? I have already tried to replace the batteries but since the computer won't get past the spinning wheel of death then the keyboard won't connect.

    Please follow Apple's advice in http://support.apple.com/kb/TS2570. If you need to get your hands on a wired USB keyboard, even a PC one will work fine.
    Do not follow the previous poster's advice, that option is a "last chance" option. OS X is stable and in most cases a reinstall is never needed. Follow the directions in Apple's letter.

  • How can I re-start when stuck on apple logo/spinning gear page for HOURS???

    I uploaded 12 updates at once and when I went to restart, it became stuck on the page with the apple logo and spinning gear. Left it for hours and hours but no change. I have removed the battery and re-powered. I've also tried to use the install Disc 1... Urgh! Any solutions?
    Thanks, Dot

    If you are uploading anything it should not affect your machine unless your computer coincidentally failed while doing so. I am going to assume you mean you downloaded 12 updates.
    I also assume you mean that when trying to start it after having removed and the replaced all sources of power it still will only get as far as the apple logo with spinning gear.
    Are you holding the C key while starting it with the install DVD inserted? That should cause it to boot from the DVD after which you can use Disk Utility to repair the disk or to re-install the OS if needed.

  • Mac Book Pro Mavericks OS 10.9.5 stops at apple logo with spinning gear.

    After working fine for a year, suddenly I cannot get past the apple logo with spinning gear page,
    Already tried:
    1. safe mode-loading bar disappears 1/3 way through,
    2. downloading/reinstalling Mavericks OS-took 4 hours, reboot led right back to same issue,
    3. disk/permissions repair - same issue when rebooted
    4. Resetting PRAM - heard second chime - same issue

    The startup drive is failing, or there is some other internal hardware fault.
    Back up all data on the drive immediately if you don't already have a current backup. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
    *An SSD doesn't need to be zeroed.

  • My iMac will not boot up - held shift key - spinning gear does not advance  -  will not advance to home page??

    My Mac will not boot up- advance to desk top- spinning gear keeps on going - white screen with apple logo only???
    Held shift key - right after pushing power button

    That is typically indicative of either a hard drive corruption or a hardware failure. What happens if you just let the Mac sit forever? Does it boot to a folder icon?
    How old is your iMac? You may be able to run Hardware Diagnostics by booting up holding down the "D" key as well.

  • IMac G5 doesn't go past grey screen with apple and spinning gear

    I have an iMac G5 (Ambient Light Sensor) running Mac OS X 10.5.2 Leopard. Last night my computer froze while using QuickTime. I had to force shutdown the computer by holding the power button for 5 seconds after everything else failed.
    Now it won't start. I hear the chime, the apple logo on grey screen appears and I see the spinning gear. But it stays like that indefinitely. I can boot with the Leopard DVD with no problem. I verified/repaired the boot disk. I verified/repaired the permissions. Everything is super fine. Made sure the selected startup disk was the correct one. I can even start up in FireWire Target Mode. I've resetted the PRAM and the SMU. Starting in single user mode also works.
    How can I solve this startup issue. Are there things I could try before resorting to a archive install or clean install of Leopard. My HD is 232GB and I have 197GB of data.
    Thanks for the help.

    I opened the back cover according to the instuctions in the manual to check the internal battery (which is fine and strong according to my little battery tester). I followed the steps in the support article "iMac G5: Troubleshooting when your computer won't turn on". According to the LED, my power supply is fine. I turned on my computer with the back cover off using the internal power button. It turned on, chimed, did the usual SuperDrive sound and did a complete boot. I took a peek at the screen by lifting a corner cause it was laying face down on a soft towel on my bed. And I saw the user prompt asking me my password, and the galaxy theme desktop picture. So I turned this off and placed the cover back on. But it still won't start using the external power button. Thanks with all your help Miriam. I'm now gonna look for a solution with the external power button issue.

  • My iMacG5 will only boot to white screen, gray apple and spinning gear. Help?

    My iMacG5 will only boot to white screen, gray apple and spinning gear. Help?
    Also not totally sure if it's an Intel based computer, but that's what I recall. Any way to check, since I can't get to About This Mac window?
    It's running on OSX Leopard 10.5.4
    First symptom = running slowly - then it kind of froze with color wheel spinning - thought a forced shut down would help - help power button til off, then white screen, gray apple and spinning gear.
    Have tried...
    1. Turn off the computer by choosing Shut Down from the Apple menu, or by holding the power button until the computer turns off.
    2. Unplug all cables from the computer, including the power cord.
    3. Wait 10 seconds.
    4. Plug in the power cord while simultaneously pressing and holding the power button on the back of the computer.
    5. Let go of the power button.
    6. Press the power button once more to start up your iMac.
    Then try booting from your install disc again.
    - No change
    And...
    Booting From An OS X Installer Disc
      1. Insert OS X Installer Disc into the optical drive.
      2. Restart the computer.
      3. Immediately after the chime press and hold down the "C" key.
      4. Release the key when the spinning gear below the dark gray Apple logo
          appears.
      5. Wait for installer to finish loading.
    - The fan just got louder.
    Thanks for your help.

    You need to do an Erase and Install or an Archive and Install depending on whether the hard drive is OK or needs to be reformatted.
    Start by booting from your Leopard DVD. The rest is just following directions.
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • My mac shows a grey screen and spinning gear and nothing else. please help! i want my mac to work again :/

    My mac needed new updates and after clickign update it soon told me there was an error and it froze. I then let it sit fo about 15 minutes adn nothign changed so I restarted it and ever since then all my computer will show is the grey screen and a spinning gear :/ can anyone help me with this problem?

    I had the same issue, and I had recently backed-up my files (mostly because the mac was acting wonky before this even happened), so I did an erase and install. Then I ran through all the software upgrades and installed all of them. When I did a required restart (for the Mac OS X 10.4.11 update) it went BACK to grey screen with spinning ball. Talk about frustrating!
    I think there is something weird going on with the iTunes update and the Mac OS X 10.4.11 update. But one can't be used without the other. So I'm not sure how to update everything safely and get an up to date system, without having all the problems I had before. So now I'm using Mac OS X 10.4.7 so I can have a stable system to do my work, but I can't run iTunes 7.0. I'm too scared to update OS b/c I can't waste another day re-installing everything (for like the third time).
    I'm a pretty new Mac user (year and half) so this may sound really dumb, but any suggestions would be very welcomed. I may start a new thread instead of hijacking this one...

  • Spinning gear at startup (OS X Panther 10.3.9)

    Hi, I have a Powerbook G3 Pismo that runs OS X 10.3.9. I have recently only been seeing only a spinning gear at startup and it will hang there. I tried safe mode, resetting the PRAM, and resetting the NVRAM with open firmware. Upon trying verbose boot, there were problems starting here:
    "Creating RAM Disk for syslogd
    hdik: attach failed: error e00002f0
         syslogd:cannot create /var/run/syslog: Read-only file system
    syslogs: child pid 103 exited with return code 1
    Creating RAM Disk for crash reporter
    hdik: attach failed: error00002f0
    Launching Crash Reporter
    Jul 4 6:55:32 com.apple.SecurityServer : database /var/db/CodeEquivelanceDatabase opened READONLY (R/W failed errno=30)
    Jul 4 6:55:32 com.apple.SecurityServer : error writing entropy file /var/db/SystemEntropyCache
    Jul 4 6:55:32 com.apple.SecurityServer : Entering Service"
    Then it just hangs there with the big white block below that, but I can't type anything. Would trying to fix the disk by making it read and write via Single-User Mode help?

    Hi deuce1981,
    Your data will more than likely be "lost forever". Especially if you kept up on your security updates and had at least a 13 bit PW of utter nonsense.
    I suggest you report your computer as being stolen to Apple and here's a helpful site link : http://www.freemacblog.com/how-to-prepare-for-a-stolen-mac/
    Hope this helps,
    Michael

  • Factory Reset doesn't work on Spinning Gears lumia 928

    Hello,
    Last night i was struck with the Spinning Gears on my Nokia Lumia 928.  I researched it a bit to see what i could do to fix it, sadly it didn't help much. most people said to Factory Reset the phone (Up volume, down volume, power, down volume.)  But it does absolutely nothing at all. I get no ! when i reset the phone. All it does is show the word Nokia then spinning gears. People also said just reset it a few times and it will work, from wen i started counting i reset it over 30 times and let the gears spin for 8 hours. The phone doesn't charge ether but it will stay on if it is plugged in. Im out of ideas on how to fix this phone, and i rather not wait a few days for them to send me a new one IF they even do send me one.
    If anyone has any ideas for me peoples let me know. Even if the idea is, you cant do anything bring it to the store thats fine i just wanna know if theres anything i can do.

    I am stuck here.  I have had the Lumia 928 for about 2.5-3 months now.  I have decided to go back to Android, but want to give the phone to my son.  I went to do a Factory Reset and have been stuck on Gears for 2 days.  I have let the battery drain, removed the SIM, and did the following from the Nokia Support Site 5-6 times.  No luck, can you help?
    Step 1
    Press and hold power and volume down key.
    Phone vibrates (release the keys)
    Right after this press and hold the volume down key down
    Exclamation mark is shown on the screen (release the volume down key)
    Step 2Then input the keys in the following order:
    Volume up
    Volume down
    Power
    Volume down
    Step 3
    The phone will reset and boot up automatically. Please note that this may take several minutes.
    Chuck
    >>Personal information removed<<
    Message was edited by: Verizon Moderator

Maybe you are looking for