How to clear the alertlog and trace file?

since the database was created,the log and trace file have't been cleared.how to clear the alertlog and trace file?3tx!!

Hi Friend.
You can eliminate all the files ".TRC" (trace files) to purify the directory BDUMP. These are not necessary files in order that the Oracle Server works.
The file Alert.log is a file that the Oracle Server can recreate if you eliminate it. When Oracle Server's process realizes certain action (for example ARCH), Oracle creates again the file (if it does not exist), or it adds text (if it exists) with the new income.
It can happen, that appears some Bug if the file Alert.log does not exist. Though this is slightly possible.
Anyhow I recommend to you in UNIX to use from the prompt: $> filename in order to take the size of the file to 0 bytes, without need to eliminate it. Is the same thing when you want to purify the listener.log, the sqlnet.log or the sbtio.log.
I wait for my commentaries you be of great help.
Bye Friend...

Similar Messages

How to migrate the RPD and catalog file from siebel analitics to obiee

hi all
How to migrate the RPD and catalog file from siebel analitics to obiee and obiee to obiee 11g
Thanks
Sreedhar

hi sreedhar,
you can migrate from siebel to obiee 10g...check this out http://debaatobiee.wordpress.com/tag/migration-siebel-analytics-obiee/
Next install OBIEE 11g and migrate obiee 10g to 11g using this http://prolynxuk.com/blog/?p=424
hope answers your questions.
Cheers,
KK

How to clear the RX and TX rate stats of an interface

On a catalyst switch when I use the command "show interfaces summary" I get great stats on the interfaces. Issuing the command "clear counters" clears the numbers for these stats regarding dropped packets (and a lot of other things, I know), but it doesn't clear the tx and rx rate stats. So my question is:
1) is there a way I can clear them
2) how are they calculated in the first place
Thanks, Mike

I believe tx and rx rate stats are not cumulative counters. If you have no traffic (and your refresh rate is 30 seconds) then those values will be 0.

How to transport the CO and DATA file to SAP system

Hello Experts ,
I want to know the procedure to import a transport request into an isolated SAP system ( which is not in the transport route ) using the CO and DATA files .
I know that user should have adminstrator role to do this but i dont know how to do this .
Regards
Vivek

Simply copy the source cofile and datafile from the source system to the target system and then import.
Data file is located at /usr/sap/trans/<sid>/data with format R<transport_number>.<sid> and cofile is located at /usr/sap/trans/<sid>/cofile with format K<transport_number>.<sid>
Copy them to the same location on the target system and then go to STMS -> Extras -> Add -> insert the name of the transport in format <sid>K<transport_number>, this will add the transport to the import queue then just simply import the transport.
Regards
Juan

How to clear the clipboard and empty drawings ?

Similar question has been in the Sketch Forum for half a year already, with no satisfying answer...
My clipboard is becoming an extremely messy merry-go-round. Isn't there even some kind of hack ?
And how can I delete cleared or empty drawings from a project (so not the whole project itself) ?
I can't copy or move drawings from one drawing to another, without turning it into a 'flat' image.

There is no way to clear the clipboard. It just has a fixed set of clippings that get recycled through. In addition to the merry-go-round view, there is also a grid view (tap the grid icon in the top left), which can be more convenient to look at if you have a lot of clippings. You can also choose to view just your "favorited" clippings instead of all your clippings (tap the star icon in the top right).
As for deleting drawings from a project, tap the edit button on a project (pencil icon in the top right of the project header), and tap the drawings you want to delete. Once some drawings are selected, tap the trash icon to delete those drawings. Be aware that this action is not undoable once you choose OK in the confirmation alert dialog.
Unfortunately, copying and moving drawings from one project to another is not supported. However, that and other organizer enhancements are on our roadmap.
Hope that helps,
Frank
Draw Engineering

Dunno.how to install the antivirus and zip file...

Hi..... I already bought a blackberry playbook...just now I want to install the antivirus and zip software,but it says the software is not support by the currently device...so how to solve this problem..and can you show the link to install this two software.... Thanx

There are no known viruses for the BlackBerry devices, therefore there is no Antivirus software available or required.

How to repopulate the tablet and phone files in a site

I messed up the phone and tablet versions of a web site.
I can manually delete all but the index page of the phone and tablet versions
I want to remove all of them and then use the Muse Add phone layout and add tablet layout to re-import all my desktop pages
Is there any way to do that a second time in a muse site?
Thanks
Kirby

Yes, absolutely you can.
Right click on the button for the view you want to delete.

Try to do my first XML Schema in SQL Server 2012 Mangement Studio(SSMS2012)-How to execute the xsd and xml files in SSMS2012?

Hi all,
I learmed the basic stuff of XML, DTD, DOM, etc. long time ago. Now, I came back to resume my XML journey and try to learn the XML Schemas, XPath and XQuery. I have Microsoft SQL Server 2012 Management Studio (SSMS2012) in our computer network. From
Page 221 of the old Book "Beginning XML 2nd Edition" written by David Hunter, et.al., (published by Wrox), I copied the name5.xsd and name5.xml :
<?xml version="1.0"?>
<schema xmlns=http://www.w3.org/2001/XMLSchema"
targetNamespace="http://www.wrox.com/name" xmlns:target="http://www.wrox.com/name"
elementFormDefault="qualified">
<element name="name">
<complexType>
<sequence>
<element name="first" type="string"/>
<element name="middle" type="string"/>
<element name="last" type="string"/>
</sequence>
</complexType>
</element>
</schema>
<?xml version="1.0"?>
<name
xmlns=http://www.wrox.com/name"
xmlns:xsi="http://www.wrox.org/2001XMLSchema-instance"
xsi:schemaLocation="http://www.wrox.com/name name5.xsd"
title="Mr.">
<first>John</first>
<middle>Frizgerald</middle>
<last>Doe</last>
</name>
How can I execute these two files in my SSMS2012 for doing my first XML Schema trial?
Please kindly help, advise and respond.
Thanks in advance,
Scott Chang

Hi Eric Zhang, Thanks for your nice response.
1) I saw the CREATE XML SCHEMA COLLECTION (Transact-SQL) and tried its first example "Create XML schema collection in the database" in my SQL Server 2012 Management Studio (SSMS2012):
-- Create a sample database in which to load the XML schema collection.
-- Copied this set of code stsments from Microsoft Library (ms176009)
-- ColesMS12_20a.sql (saved in C:/Documents/SQL Server Management Studio)
-- 19 March 2015 1145 AM
CREATE DATABASE SampleDB
GO
USE SampleDB
GO
CREATE XML SCHEMA COLLECTION ManuInstructionsSchemaCollection AS
N'<?xml version="1.0" encoding="UTF-16"?>
<xsd:schema targetNamespace="http://schemas.microsoft.com/sqlserver/2004/07/adventure-works/ProductModelManuInstructions"
xmlns ="http://schemas.microsoft.com/sqlserver/2004/07/adventure-works/ProductModelManuInstructions"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
xmlns:xsd="http://www.w3.org/2001/XMLSchema" >
<xsd:complexType name="StepType" mixed="true" >
<xsd:choice minOccurs="0" maxOccurs="unbounded" >
<xsd:element name="tool" type="xsd:string" />
<xsd:element name="material" type="xsd:string" />
<xsd:element name="blueprint" type="xsd:string" />
<xsd:element name="specs" type="xsd:string" />
<xsd:element name="diag" type="xsd:string" />
</xsd:choice>
</xsd:complexType>
<xsd:element name="root">
<xsd:complexType mixed="true">
<xsd:sequence>
<xsd:element name="Location" minOccurs="1" maxOccurs="unbounded">
<xsd:complexType mixed="true">
<xsd:sequence>
<xsd:element name="step" type="StepType" minOccurs="1" maxOccurs="unbounded" />
</xsd:sequence>
<xsd:attribute name="LocationID" type="xsd:integer" use="required"/>
<xsd:attribute name="SetupHours" type="xsd:decimal" use="optional"/>
<xsd:attribute name="MachineHours" type="xsd:decimal" use="optional"/>
<xsd:attribute name="LaborHours" type="xsd:decimal" use="optional"/>
<xsd:attribute name="LotSize" type="xsd:decimal" use="optional"/>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>' ;
GO
-- Verify - list of collections in the database.
select *
from sys.xml_schema_collections
-- Verify - list of namespaces in the database.
select name
from sys.xml_schema_namespaces
-- Use it. Create a typed xml variable. Note collection name specified.
DECLARE @x xml (ManuInstructionsSchemaCollection)
GO
--Or create a typed xml column.
CREATE TABLE T (
i int primary key,
x xml (ManuInstructionsSchemaCollection))
GO
-- ////The following code statements are not used in order to create SampleDB
-- Clean up
---DROP TABLE T
---GO
---DROP XML SCHEMA COLLECTION ManuInstructionsSchemaCollection
---Go
---USE Master
---GO
---DROP DATABASE SampleDB
It worked and I got the following results:
1 4 NULL sys 2009-04-13 12:59:13.390 2012-02-10 20:16:02.097
65536 1 NULL ManuInstructionsSchemaCollection 2015-03-19 11:47:17.660 2015-03-19 11:47:17.660
http://www.w3.org/2001/XMLSchema
http://schemas.microsoft.com/sqlserver/2004/sqltypes
http://www.w3.org/XML/1998/namespace
http://schemas.microsoft.com/sqlserver/2004/07/adventure-works/ProductModelManuInstructions
But, I don't undertand (i) what SCHEMA COECTION is, (ii) what <xsd:schema targetNamespace=.....</xsd:complexType> are, (iii) How I can specify my "project specific" schema in the Microsoft SCHEMA COLLECTION to check my xml file.
2) I dived in the XQuery programmimng in SSMS2012 in the last few weeks. I used the examles of Ad-Hoc XML File Query by Seth Delconte (in
httpS://www.simple-talk.com/content/print.aspx?article=1756) in my SSMS2012. They worked. But I don't understand the (i) Importing XML data using a function, (ii) Using the XQuery contans()
function to find substrings, (iii)Efficiency comparisons in the article.
Please kindly help me in enlightening me to resolve the difficulties listed in 1) and 2).
Thanks,
Scott Chang

How to connect the flex and css file on the server..

when i work on my system, i just give source="abc.css" in style tag but when i upload its not working...can someone help me?

A common practice is to place the CSS files under <src><assets><styles> directory in your project.
Then, in your MXML file you use them :<mx:Style source="/assets/styles/common.css"/>
When ready to publish to online server, you do as "Export release build" from your project menu.
This will generate all you need files in the "bin-release" directory in your project environment.
You should upload all this content ( from the bin-release directory) to your server.

How do I clear the bookmarks and history on safari with ios 7 system?

I'm using safari on my ipad with ios 7.02 operating system. I've searched for answers in several places but no one seems to know how to clear the bookmarks and history on safari which show up below the address bar when you type in a new website address. Does anyone know how to clear this out? I've searched several places and others seem to have the same problem.

Click on the bookmark icon > Edit > Create a New Folder and call it whatever you want then
Settings > Safari > Favorites > select the new empty folder you just created.
To clear the history:
Settings > Safari > Clear History
or
In Safari click the bookmark icon > History > Clear

How to clear the Residual & partial payment through app

Hi Experts,
How to clear the Residual and partial payment through app in accounts payable i tried but i am not getting the out put so plz clarify the my question and any other configuration for that give answer with example...
Thanks for advance
Regards,
Nivas99

Hi Nivas,
Partial payment is possible throw app but not possible residual payment.
Partial payment u create a payment request p as a special indication u can try.
I hope this is help full u.
regards,
venkatesh

Change the Data and Log file locations in livecache

Hi
We have installed livecache in unix systems in the /sapdb mount directory where the installer have created sapdata and sapdblog directories. But the unix team has already created two mount direcotries as follows:
/sapdb/LC1/lvcdata and /sapdb/LC1/lvclog mount points.
While installing livecache we had selected this locations for creating the DATA and LOG volumes. Now they are asking to move the DATA and LOG volumes created in sapdata and saplog directories to these mount points. How to move the data and log file and make the database consistent. Is there any procedure to move the files to the mount point directories and change the pointers of livecahce to these locations.
regards
bala

Hi Lars
Thanks for the link. I will try it and let u know.
But this is livecache (even it uses MaxDB ) database which was created by
sapinst and morover is there any thing to be adjusted in SCM and as well as
any modification ot be done in db level.
regards
bala

How can stop the bdump and udump trace files from accumulating?

The files are growing so until it is filling up the user's c: drive. It's hundreds of files over 20 megs.

Angela,
The management of those files is a reposnsibilty of the DBA. ie The files dumped there are from background processes, session traces and your alert log.
The alert log in bdump should be checked daily and errors investigated. Some errors will result in trace files being dumped. The alert log will always grow during normal operation and you can simply delete it or better yet zip it up and store it somewhere for a period of time.
You can clean up the udump user traces files by simply deleting them periodically. For other traces you should have a look to see what they are for. Any ORA 600 traces should be investigated.
If you are not a DBA and this seems to much trouble then you can just delete the files to reclaim the space.

How to configure logs and trace files

Hello people,
We have just implemented ESS-MSS, we have around 25000 people using this service and every 2 days my logs and trace file in server gets full and portal gets down.
Please suggest how to solve this problem,how can i reduce trace and log files,,,,,any configuration or setting is there to configure this...please suggest and explain how can it be done.
Biren

Hi,
You can control what messages gets logged depending on the severity.
This can be configured using Log Configurator, check this how you can set severity to different locations.
Netweaver Portal Log Configuration & Viewing (Part 1)
Regards,
Praveen Gudapati

How to clear the cache files in folder Temporary Internet Files

When one user opens files such as pdf. or doc. from Portal, the same file will be downloaded into the Temporary Internet Files folder. if another user copied the files out of the Temporary Internet Files folder from this computer and save to someplace else, then we face one security problem.
So my question is: How to clear the cache files in folder Temporary Internet Files?? Can we delete the files automatically when close the files in Portal??
or is there some ways to make encrypty???
Thanks very much!

Hello,
this is a basical security problem which should be resolved by the OS standard security setup . No other user should have access to the temporary file folders in the personal directory. The user account must be secure. Normaly your security problem should not be a problem if basic security exists on the clients.
You can resolve this problem if every user has his own account on the client
The users having no administration permissions on the clients
The folder for the temporary internet files is placed in the personal profile folder of the user account.
On default no other user has access rights to you personal folder, this means the client OS is setup correctly.
You can setup the IE that no temporary files are saved (but it reduces performance)
You can enable IE to delete automaticly the temporary files if IE is closed.
Hope it helps.
Regards
Alex

How to clear the alertlog and trace file?

Similar Messages

Maybe you are looking for