How to clear the fields of the screen ?

Hi,
I'm having two fields for selection..when i press enter after entering some values,based on that my table control will get filled up..and when i double -click on that row in table control i get all the values of that row in the respective fields in my tabstrip..all these r in same screen 100..and in tabstrip i have 5 tabs with 5 subscreens..containing the fields of table control..now that when i enter a value in the selection screen fields..my table control is getting added with a second row of values as required..but my problem is that the values of the tabstrip should get cleared..this is not happening..i wrote logic like if my tablecontrol is getting appended the values from tabstrip should get cleared..all the fields are getting cleared except the fields of tab which is active..how to do it..

Hi,
Try this out.
declare a variable in Top Include
data : appended type c.
if the appending to the internal table is success means sy-subrc = 0
make appended = 'X'.
go to the PBO of subscreen of the tab where you want to clear the data
if appended = 'X'.
clear appended.( this is must otherwise for every call of the subscreen of this tab the values get cleared)
here clear the value of the subscreen of the tab strip)
endif.
The same can be achieved using the OK_CODE also
Regards
Ramchander Rao.K

Similar Messages

How to clear the screen in java?

Hi,
How to clear the screen in java without using any loops?
Thanks

Just paint with your background color to let the old paintings vanish.

How to clear the screen in the command prompt?

Hello Everyone,
I was wondering how we can clear the screen in the command prompt in Java. I remember we can do this in C by writing system("cls");
What is the best IDE for writing Java programs. Is the NetBeans IDE good? Thank you very much.

I was wondering how we can clear the screen in the
command prompt in Java. I remember we can do this in
C by writing system("cls");I guess there's no Java way of doing that because it's a function of the shell you're calling. If you try to use Runtime.exec on cls, it starts yet another shell, clears that, and closes it again, so it has no effect on your output.
You could try using the '\b' backspace character, if that helps.
What is the best IDE for writing Java programs. Is
the NetBeans IDE good? Thank you very much.By the way you're asking this question, the answer will be almost certainly "none". If you want to, you can search this board for the few million times this question was asked before, pick all IDEs suggested there and use the one you're most comfortable with.

Does anybody know how to Clear the screen in Java?

Hi guys,In C we use System Clear.
In java,which instructions shall i use in order to clear the screen?
Thanks,in advance!

Of course you shouldn't do so anyway...
Terminal programs should coexist with all other terminal programs and not try to dominate the screen.
They should never clear the screen as this would remove output from other programs running in the same terminal.

How do I clear the screen?

Hello,
I would like to know how to clear the screen. What is the code for it?
Ernest_E

Hi,
Look to the left. There is a search field there. This question is often asked. The short answer is that you can't do it.
/Kaj

Clearing the screen using java

hi
how to clear the screen using a java program

for (int n = 0; n < 24; n++) System.out.println();
Even better: don't clear the screen. The program I ran before your program printed out very important things. If your program throws away those important things then I will not like you or your program.

How to clear text fields when the user navigates back to the screen

Hi,
Does anyone have any idea on how to clear the text input fields and dropdown boxes when the user navigates back to the screen, say for e.g. create screen?
My issue is that i have plenty of fields in the create screen within a form. Is there a way to avoid programaticaly blanking out every field and just do it at the form level using an api to reset to a state before the user entry?
Thanks

This code allows you to make it more generic, and you would need to tweak it if there are more than TextInput controls, but it should provide some ideas.
As far as using states, you could use SetProperty to set the text to empty, but that might be messier.
<?xml version="1.0"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
<mx:Script>
    <![CDATA[
      import mx.containers.FormItem;
      import mx.controls.TextInput;
      import mx.events.IndexChangedEvent;
      import mx.core.Container;
      private function clearSreen(evt:IndexChangedEvent):void{
        var view:Container = tn.selectedChild as Container;
        for each(var child:Object in view.getChildren()){
          if(child is FormItem){
            var subchild:DisplayObject = child.getChildAt(0);
            if(subchild is TextInput){
              TextInput(subchild).text = "";
    ]]>
</mx:Script>
<mx:TabNavigator id="tn" resizeToContent="true"
    change="clearSreen(event)">
    <mx:Form id="frm1" label="View Number One">
      <mx:FormItem label="First name:">
        <mx:TextInput/>
      </mx:FormItem>
      <mx:FormItem label="Last name:">
        <mx:TextInput/>
      </mx:FormItem>
    </mx:Form>
    <mx:Form id="frm2" label="View Number Two">
      <mx:FormItem label="Address1:">
        <mx:TextInput/>
      </mx:FormItem>
      <mx:FormItem label="Address2:">
        <mx:TextInput/>
      </mx:FormItem>
      <mx:FormItem label="City:">
        <mx:TextInput/>
      </mx:FormItem>
      <mx:FormItem label="State:">
        <mx:TextInput/>
      </mx:FormItem>
      <mx:FormItem label="Zip code:">
        <mx:TextInput/>
      </mx:FormItem>
    </mx:Form>
</mx:TabNavigator>
</mx:Application>
If this post answers your question or helps, please mark it as such. Thanks!
http://www.stardustsystems.com
Adobe Flex Development and Support Services

How do I clear the screen in console application?

In C or C++ we can clear the screen by clrscr() function.
How can I acheive something similiar to this in Java

Hi,
Take a look at the below link may help you
http://www.codeguru.com/forum/archive/index.php/t-323058.html
This forum is exclusively related to discussions about Sun java Studio Creator. Henceforth please post these threads to an appropriate forum.
MJ

How do I clear the screen in text mode (cls)

How do I clear the screen in text mode (cls)
Thanks,

Clearing of console is an OS specific command, so
in case of Windows you should try:
Runtime.getRuntime().exec("cls");Though it wouldn't help, because exec() will be done as a separate
process... :)
Paul

How do I clear the Screen Saver?

How do I clear the Screen Saver from showing the photos on my phone?

You must have set it to use your photo stream as the screensaver. You can go into settings - screensaver to change to a different source.

How to get the screen groups for the screen field which are on selectionscn

hiiii Experts,
               How to know the screen groups for the screen field which are on selection screen.
Thanks and regards,
kasyap

     NAME                                             PNPABKRS-LOW
        GROUP1                                             SEL
        GROUP2                                             DBS
        GROUP3                                             LOW
        GROUP4                                             180
to get this use this:
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    if screen-name CS 'ABKRS'.
      BREAK-POINT.
    endif.
ENDLOOP.

How to clear the DOS screen through java program

how to clear the DOS screen through java program

Just some Friday fun. Use the telnet program that comes with Windows and supports VT escape sequences.
import java.io.*;
import java.net.*;
public class AutoTelnet {
     private static Socket s;
     public static void main(String[] args) throws Exception {
          Thread t = new Thread() {
               @Override public void run() {
                    try {
                         s = new ServerSocket(5555).accept();
                    } catch (IOException ex) {
                         ex.printStackTrace();
          t.start();
          Process p = new ProcessBuilder("cmd", "/C", "start", "telnet", "127.0.0.1", "5555").redirectErrorStream(true).start();
          t.join();
          PrintStream ps = new PrintStream(s.getOutputStream());
          ps.println("Screen will be cleared in 5 seconds");
          ps.println("5");
          Thread.sleep(1000);
          ps.println("4");
          Thread.sleep(1000);
          ps.println("3");
          Thread.sleep(1000);
          ps.println("2");
          Thread.sleep(1000);
          ps.println("1");
          Thread.sleep(1000);
          ps.println("\u001b[2J");
          Thread.sleep(5000);
}

How i can clear the screen in JAVA?, in c++ is command that called .......

system("cls")
but in JAVA??
thx
gicio1

system("cls") is the silly way to do it. For a start, "cls" isn't on most computers, because most computers call it "clear". You could run this from Java using Runtime.exec("clear"), Runtime.exec("cls"), etc .. but the best way to clear the screen is still to print out N newlines, where N is the height of the screen.
The only problem with this way is, you don't know the height of the screen. You could pass an environment variable in as a system property, from whatever launches your program, and if it's not there "assume" it's 200 or something. Then just build up a string with "\n\n\n\n\n\n\n\n"... and print it out. Blam, blank screen. :-)

How to clear the text in the Text Editor

Hi all,
I created a Text editor and also i am having language field in the screen.
whenever i change the language auomatically the text has to change when the text exists for that
language.
this is working fine, but when the Text exist , the text editor should be blank.
But it is carrying the Previous editor text itself into it .
How to clear the text in the Editor.
Regards,
Madhavi

Hello Madhavi
The simple report ZUS_SDN_TEXTEDIT_CONTROL shows how to switch the texteditor contents when changing the language.
*& Report ZUS_SDN_TEXTEDIT_CONTROL
*& Thread: how to clear the text in the Text Editor
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1145272"></a>
*& By default the itab GT_OUTTAB contains texts in DE and EN.
*& To switch the language directly enter into the command window:
*& LANGU=DE, LANGU=EN or LANGU=FR
REPORT zus_sdn_textedit_control.
TYPE-POOLS: abap.
TYPES: ty_t_text     TYPE TABLE OF as4text
                     WITH DEFAULT KEY.
TYPES: BEGIN OF ty_s_outtab.
TYPES: language TYPE spras.
TYPES: text     TYPE ty_t_text.
TYPES: END OF ty_s_outtab.
TYPES: ty_t_outtab    TYPE STANDARD TABLE OF ty_s_outtab
                      WITH DEFAULT KEY.
DATA: gt_outtab       TYPE ty_t_outtab,
      gs_outtab       TYPE ty_s_outtab.
DATA: gd_language     TYPE spras.
DATA: go_docking      TYPE REF TO cl_gui_docking_container,
      go_textedit     TYPE REF TO cl_gui_textedit.
DATA: gd_okcode       TYPE ui_func,
      gd_repid        TYPE syst-repid.
START-OF-SELECTION.
PERFORM fill_texts.
gd_language = syst-langu.
PERFORM init_controls.
* Link the docking container to the target dynpro
gd_repid = syst-repid.
CALL METHOD go_docking->link
    EXPORTING
      repid                       = gd_repid
      dynnr                       = '0100'
*      CONTAINER                   =
    EXCEPTIONS
      OTHERS                      = 4.
IF sy-subrc NE 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM set_text_editor.
* NOTE: dynpro does not contain any elements
"       ok-code => GD_OKCODE
CALL SCREEN '0100'.
* Flow logic of dynpro (does not contain any dynpro elements):
*PROCESS BEFORE OUTPUT.
* MODULE STATUS_0100.
*PROCESS AFTER INPUT.
* MODULE USER_COMMAND_0100.
END-OF-SELECTION.
*&      Module STATUS_0100 OUTPUT
*       text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'. " contains push button "DETAIL"
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE user_command_0100 INPUT.
TRANSLATE gd_okcode TO UPPER CASE.
CASE gd_okcode.
    WHEN 'BACK' OR
         'EXIT' OR
         'CANC'.
      SET SCREEN 0. LEAVE SCREEN.
    WHEN 'LANGU=DE' OR
         'LANGU=EN' OR
         'LANGU=FR'.
      PERFORM get_text_editor.
      SPLIT gd_okcode AT '=' INTO gd_okcode gd_language.
      PERFORM set_text_editor.
    WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Form FILL_TEXTS
*       text
* --> p1        text
* <-- p2        text
FORM fill_texts .
* define local data
DATA: ld_string   TYPE string.
gs_outtab-language = 'EN'. REFRESH: gs_outtab-text.
ld_string = 'Good morning'.
APPEND ld_string TO gs_outtab-text.
APPEND gs_outtab TO gt_outtab.
gs_outtab-language = 'DE'. REFRESH: gs_outtab-text.
ld_string = 'Guten Morgen'.
APPEND ld_string TO gs_outtab-text.
APPEND gs_outtab TO gt_outtab.
gs_outtab-language = 'FR'. REFRESH: gs_outtab-text.
ld_string = space.
APPEND ld_string TO gs_outtab-text.
APPEND gs_outtab TO gt_outtab.
ENDFORM.                    " FILL_TEXTS
*&      Form INIT_CONTROLS
*       text
* --> p1        text
* <-- p2        text
FORM init_controls .
CREATE OBJECT go_docking
    EXPORTING
      parent                      = cl_gui_container=>screen0
*      repid                       =
*      dynnr                       =
*      side                        = dock_at_left
*      extension                   = 50
*      style                       =
*      lifetime                    = lifetime_default
*      caption                     =
*      metric                      = 0
      ratio                       = 90
*      no_autodef_progid_dynnr     =
*      name                        =
    EXCEPTIONS
      cntl_error                  = 1
      cntl_system_error           = 2
      create_error                = 3
      lifetime_error              = 4
      lifetime_dynpro_dynpro_link = 5
      OTHERS                      = 6.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_textedit
    EXPORTING
*      max_number_chars       =
*      style                  = 0
*      wordwrap_mode          = wordwrap_at_windowborder
*      wordwrap_position      = -1
*      wordwrap_to_linebreak_mode = false
*      filedrop_mode          = dropfile_event_off
      parent                 = go_docking
*      lifetime               =
*      name                   =
    EXCEPTIONS
      error_cntl_create      = 1
      error_cntl_init        = 2
      error_cntl_link        = 3
      error_dp_create        = 4
      gui_type_not_supported = 5
      OTHERS                 = 6.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " INIT_CONTROLS
*&      Form SET_TEXT_EDITOR
*       text
* --> p1        text
* <-- p2        text
FORM set_text_editor .
BREAK-POINT.
CLEAR: gs_outtab.
READ TABLE gt_outtab INTO gs_outtab
       WITH KEY language = gd_language.
CALL METHOD go_textedit->set_text_as_stream
    EXPORTING
      text            = gs_outtab-text
    EXCEPTIONS
      error_dp        = 1
      error_dp_create = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " SET_TEXT_EDITOR
*&      Form GET_TEXT_EDITOR
*       text
* --> p1        text
* <-- p2        text
FORM get_text_editor .
CLEAR: gs_outtab.
CALL METHOD go_textedit->get_text_as_stream
    EXPORTING
      only_when_modified     = cl_gui_textedit=>true
    IMPORTING
      text                   = gs_outtab-text
*      is_modified            =
    EXCEPTIONS
      error_dp               = 1
      error_cntl_call_method = 2
      OTHERS                 = 3.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
MODIFY gt_outtab FROM gs_outtab
    TRANSPORTING text
    WHERE ( language = gd_language ).
ENDFORM.                    " GET_TEXT_EDITOR
Regards
Uwe

How to clear the line items...

hello friends,
I am not able to clear line items with F.13 transaction for special G/L Account..i am inputing the values with the Transactions F-48 and F-43(In each transaction v have assigned the same assignment (BSIK-ZUONR)) line items has to be cleared based on Assignment....we can view the details in Tr.code-FBL1N.
Can any one help me...plzzz
vamshi

Hi PK,
1. Should we maintain OIM for all Excise G/Ls (BED, ECess, SHECess)?
- Please DO NOT maintain OIM on BED, ECESS and HECESS, only to be maintained for Cenvat Clearing Account. Also note that clearing of Cenvat Clearing is not easy, as in standard SAP, the assignment field is not updated with the same information for the Dr. and cr. line items of Cenvat Clearing Account. You need to use an exit in Substitution for it to populate the P.O. no. and line item at the time of MIRO.
2. How to clear the BED Excise GLs which is with OIM in our system, it is thru F.13 only?
You can use F.13 only if the entries are matching not otherwise, else clear all of them manually if you have good control of your account balances.
3. Can we activate or deactivate OIM any point of time, I mean can it be activated in case the G/L balance amount is not ZERO?
OIM activation for a GL - Refer Note No.1356457.
OIM Deactivation : You can deactivate OIM after making the balance Zero on that Account and by changing the Message No. FH 190 to warning in OBA5.
4. What is the use of T Code J2IUN, I have gone thru the SDN links, but I am not able to execute the screen. What parameter should we select while executing J2IUN, when we use Pay cenvat from ser tax cr and Pay ser tax from cenvat cr.
J2IUN is to utllize Excise Duty. The liability of Excise duty is utilized from Excise balances of BED, PLA , Service tax etc.. as per business requirements.
Hope this helps you.
Regards,
SAPFICO

How to clear the line items once posted...

hello experts,
i m workiing on Enhancements in fi/co...i m not able to get the actual exit..
How to clear the line items once postings has been done...i.e. once v do postings in f-48 v assign an assignment with special GL a/c as 'A'(one line item generates)....and in Tr.code f-43 once the due as been settled i.e the payment as been done and same assignment has to be given(2nd line item generates) it has to clear with the transaction f.13.but it is not..there is a report program to check fbl1n(tr.code)...once it is cleared it is shown in cleared items else it is shown in open items.....can any one help me out...
i m providing the tech names of the fields...
same program for both the transactions-- sapmf05a screen no for f-48--304 and
f-43 ---110....
Assignment --- BSEG-ZUONR....AMOUNT ---(cluster table) BSEG-WRBTR....
SPECIAL GL A/C RF05A-UMSKZ(structure)
thanks n regards,
vamshi

The prerequisites are:
1) In the customer master sales area data, shipping tab, there is a field called Order combination. u must tick that.
2) for the two orders, the sold to party & ship to party must be same
3) both orders must have created from same plant & shipping points
4) the line items must have same loading grp.
5) the both orders sheduline line date must be same.
transaction code for the same is VL04.
enter the required data and select the order nos to be processed.
Do reward points if it is useful

How to clear the fields of the screen ?

Similar Messages

Maybe you are looking for