How to clear the notification symbol circled in Red?

Hi,
Can anybody please advise how to clear away the notification symbol circled in Red?
Thanks!
Solved!
Go to Solution.

Looks like a saved webpage. Did you save a web page recently? If so you can look in your messages list to delete it and the icon should go away
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Similar Messages

How to clear the open documents in case if document currency and local curr

Hi,
Can anyboday advise how to clear the open document of a particular vendor for a particular company code. Here the issue is that balace is netted to Zero in the document currency but not in the local currency. The document was posted in Currency CAD and the local currency is GBP.
When i check the FBL1N, there is it showing net balance is ZERO, but document is still in open
status. I tried using Transaction code F-44, but it is not allowing me.
Can anyboday advise how to perform this. Points will be awarded.
Regards,
Sree.

Hi,
In the Company code global parameters(OBY6),select the check box "NO FOREX RATE DIFF.WHEN CLEARING IN LC"
and try clearing again.(You can have a F1 help on the check box to see what exactly it is).
Hope this will resolve
Assign points if useful
Thanks
Aravind
Edited by: Aravind Aitipamula on May 22, 2008 1:36 AM

How to use the separate symbol in the text field in the adobe form.

Hi,experts,
I dont know how to use the separate symbol to make a paragraph separate into several lines correctly in the text field in the adobe form.
Action:
1. config the ADS successfully.
2. create the adobe form with a mult-line textfield(binding the 'remark' context in the interface of the form) using sfp.
3. create a WDA for invoke the form and transfer the 'remark' context data.
I use the following codes to display the paragraph in the PDF document:
CONCATENATE
'1、aaaaaaaaaaa；'
'2、bbbbbbbbb '
'3、ccccccccccc'
'4、ddddddddd'
INTO remark .
lo_nd_z_hr_php_payslip->set_attribute(
EXPORTING
name = `REMARK`
value = remark ).
But I found all the content aren't paragraph separate correctly in the text field in the adobe form when I run the WDA.
Could you please give me some hints to make the paragraph separate correctly in PDF document? Thanks a lot in advance!
My email is : [email protected]
Best regards,
Tao
Edited by: wang tao on Apr 8, 2008 1:58 AM

Hi,
If it is just a one word value then you could use this in the exist event;
this.rawValue
= util.printx(">?<*",this.rawValue);
This changes the first character (represented by the ?) to uppercase (represented by the >) and all trailing characters (represented by the *) to lowercase (represented by the <).
If you wanted something more general ... if they could also enter a middle name then you could call a function like;
function toTitleCase(textValue)
return textValue.toLowerCase().replace(/\b[a-z]/g, function replacer(match) { return match.toUpperCase(); });
This uses a regex to change all lowercase letters following a word boundary to uppercase.
Bruce

How to use the separate symbol in the textfield in adobe form?..urgent

Hi,experts,
I dont know how to use the separate symbol to make a paragraph separate into several lines correctly in the text field in the adobe form.
Action:
1. config the ADS successfully.
2. create the adobe form with a mult-line textfield(binding the 'remark' context in the interface of the form) using sfp.
3. create a WDA for invoke the form and transfer the 'remark' context data.
I use the following codes to display the paragraph in the PDF document:
CONCATENATE
'1、aaaaaaaaaaa；'
'2、bbbbbbbbb '
'3、ccccccccccc'
'4、ddddddddd'
INTO remark .
lo_nd_z_hr_php_payslip->set_attribute(
EXPORTING
name = `REMARK`
value = remark ).
But I found all the content aren't paragraph separate correctly in the text field in the adobe form when I run the WDA.
Could you please give me some hints to make the paragraph separate correctly in PDF document? Thanks a lot in advance!
My email is : [email protected]
Best regards,
Tao
Edited by: wang tao on Apr 8, 2008 2:05 AM
Edited by: wang tao on Apr 10, 2008 10:29 AM
Edited by: wang tao on Apr 11, 2008 5:29 AM

With the pen tool in Indesign, is there a way of making the points not join if you want to make a few single lines?

How to clear the rows in a jTable

Can anyone tell me how to clear the contents of all the rows in a jTable?

This is how I did. Posting the same.
jTable1.selectAll();
int[] array = jTable1.getSelectedRows();
for(int i=array.length-1;i>=0;i--)
DefaultTableModel model = (DefaultTableModel)jTable1.getModel();
model.removeRow(i);
Regards.

How to clear the data in my page after user enter submit button

hi......
how to clear the data's in my page after user enter submit button. Actually while pressing first time itself the data is uploaded in database.

Hi Nazeer,
Instead of doing it on the same button better create a separate button for this functionality, As per my understanding you want to clear these fields to create new record so that you can enter a new record so for this you just need to insert a new row in VO.
Still if you want to do it on the same button then you need to put the check that particular record is not dirty if it is not then create new record else create new record.
One more thing if you will clear on the second click of a button how will you update your record??
Regards,
Reetesh Sharma

How to clear the text in the Text Editor

Hi all,
I created a Text editor and also i am having language field in the screen.
whenever i change the language auomatically the text has to change when the text exists for that
language.
this is working fine, but when the Text exist , the text editor should be blank.
But it is carrying the Previous editor text itself into it .
How to clear the text in the Editor.
Regards,
Madhavi

Hello Madhavi
The simple report ZUS_SDN_TEXTEDIT_CONTROL shows how to switch the texteditor contents when changing the language.
*& Report ZUS_SDN_TEXTEDIT_CONTROL
*& Thread: how to clear the text in the Text Editor
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1145272"></a>
*& By default the itab GT_OUTTAB contains texts in DE and EN.
*& To switch the language directly enter into the command window:
*& LANGU=DE, LANGU=EN or LANGU=FR
REPORT zus_sdn_textedit_control.
TYPE-POOLS: abap.
TYPES: ty_t_text     TYPE TABLE OF as4text
                     WITH DEFAULT KEY.
TYPES: BEGIN OF ty_s_outtab.
TYPES: language TYPE spras.
TYPES: text     TYPE ty_t_text.
TYPES: END OF ty_s_outtab.
TYPES: ty_t_outtab    TYPE STANDARD TABLE OF ty_s_outtab
                      WITH DEFAULT KEY.
DATA: gt_outtab       TYPE ty_t_outtab,
      gs_outtab       TYPE ty_s_outtab.
DATA: gd_language     TYPE spras.
DATA: go_docking      TYPE REF TO cl_gui_docking_container,
      go_textedit     TYPE REF TO cl_gui_textedit.
DATA: gd_okcode       TYPE ui_func,
      gd_repid        TYPE syst-repid.
START-OF-SELECTION.
PERFORM fill_texts.
gd_language = syst-langu.
PERFORM init_controls.
* Link the docking container to the target dynpro
gd_repid = syst-repid.
CALL METHOD go_docking->link
    EXPORTING
      repid                       = gd_repid
      dynnr                       = '0100'
*      CONTAINER                   =
    EXCEPTIONS
      OTHERS                      = 4.
IF sy-subrc NE 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM set_text_editor.
* NOTE: dynpro does not contain any elements
"       ok-code => GD_OKCODE
CALL SCREEN '0100'.
* Flow logic of dynpro (does not contain any dynpro elements):
*PROCESS BEFORE OUTPUT.
* MODULE STATUS_0100.
*PROCESS AFTER INPUT.
* MODULE USER_COMMAND_0100.
END-OF-SELECTION.
*&      Module STATUS_0100 OUTPUT
*       text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'. " contains push button "DETAIL"
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE user_command_0100 INPUT.
TRANSLATE gd_okcode TO UPPER CASE.
CASE gd_okcode.
    WHEN 'BACK' OR
         'EXIT' OR
         'CANC'.
      SET SCREEN 0. LEAVE SCREEN.
    WHEN 'LANGU=DE' OR
         'LANGU=EN' OR
         'LANGU=FR'.
      PERFORM get_text_editor.
      SPLIT gd_okcode AT '=' INTO gd_okcode gd_language.
      PERFORM set_text_editor.
    WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Form FILL_TEXTS
*       text
* --> p1        text
* <-- p2        text
FORM fill_texts .
* define local data
DATA: ld_string   TYPE string.
gs_outtab-language = 'EN'. REFRESH: gs_outtab-text.
ld_string = 'Good morning'.
APPEND ld_string TO gs_outtab-text.
APPEND gs_outtab TO gt_outtab.
gs_outtab-language = 'DE'. REFRESH: gs_outtab-text.
ld_string = 'Guten Morgen'.
APPEND ld_string TO gs_outtab-text.
APPEND gs_outtab TO gt_outtab.
gs_outtab-language = 'FR'. REFRESH: gs_outtab-text.
ld_string = space.
APPEND ld_string TO gs_outtab-text.
APPEND gs_outtab TO gt_outtab.
ENDFORM.                    " FILL_TEXTS
*&      Form INIT_CONTROLS
*       text
* --> p1        text
* <-- p2        text
FORM init_controls .
CREATE OBJECT go_docking
    EXPORTING
      parent                      = cl_gui_container=>screen0
*      repid                       =
*      dynnr                       =
*      side                        = dock_at_left
*      extension                   = 50
*      style                       =
*      lifetime                    = lifetime_default
*      caption                     =
*      metric                      = 0
      ratio                       = 90
*      no_autodef_progid_dynnr     =
*      name                        =
    EXCEPTIONS
      cntl_error                  = 1
      cntl_system_error           = 2
      create_error                = 3
      lifetime_error              = 4
      lifetime_dynpro_dynpro_link = 5
      OTHERS                      = 6.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_textedit
    EXPORTING
*      max_number_chars       =
*      style                  = 0
*      wordwrap_mode          = wordwrap_at_windowborder
*      wordwrap_position      = -1
*      wordwrap_to_linebreak_mode = false
*      filedrop_mode          = dropfile_event_off
      parent                 = go_docking
*      lifetime               =
*      name                   =
    EXCEPTIONS
      error_cntl_create      = 1
      error_cntl_init        = 2
      error_cntl_link        = 3
      error_dp_create        = 4
      gui_type_not_supported = 5
      OTHERS                 = 6.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " INIT_CONTROLS
*&      Form SET_TEXT_EDITOR
*       text
* --> p1        text
* <-- p2        text
FORM set_text_editor .
BREAK-POINT.
CLEAR: gs_outtab.
READ TABLE gt_outtab INTO gs_outtab
       WITH KEY language = gd_language.
CALL METHOD go_textedit->set_text_as_stream
    EXPORTING
      text            = gs_outtab-text
    EXCEPTIONS
      error_dp        = 1
      error_dp_create = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " SET_TEXT_EDITOR
*&      Form GET_TEXT_EDITOR
*       text
* --> p1        text
* <-- p2        text
FORM get_text_editor .
CLEAR: gs_outtab.
CALL METHOD go_textedit->get_text_as_stream
    EXPORTING
      only_when_modified     = cl_gui_textedit=>true
    IMPORTING
      text                   = gs_outtab-text
*      is_modified            =
    EXCEPTIONS
      error_dp               = 1
      error_cntl_call_method = 2
      OTHERS                 = 3.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
MODIFY gt_outtab FROM gs_outtab
    TRANSPORTING text
    WHERE ( language = gd_language ).
ENDFORM.                    " GET_TEXT_EDITOR
Regards
Uwe

How to clear the cookie in midlet before quite the midlet?anyone?pls

i am fresh in J2ME . Can anyone teach me on how to clear the cookie in midlet before i quit from it?
I designed an application that require login and use session(cookie) management, i need to clear the cookie before or during i quit the midlet, so that the user will need to login again after quit from midlet. Can anyone pls assist me? i need it urgently!

I designed an application that require login and use session(cookie) management,How did you implement the cookies. This isn't a built-in part of J2ME. You have to implement it yourself (saving the cookie and resending it in future requests), so only you can know how to delete it.
shmoove

How to clear the screen in java?

Hi,
How to clear the screen in java without using any loops?
Thanks

Just paint with your background color to let the old paintings vanish.

How to clear the variable value in session store?

I'll try to build form for search. There are LOV and
search button on form. When user don't select anything then push
search button, I'd like the report to show query everything. I
mean the report will show like condition where id like '%'.
And I send variable between form to report by using session
store.
I select nothing in LOV but value that return by LOV is
not null. It's in stead of old value of LOV.
Please tell me.. How to clear the variable value in
session store? I'd like to set it to null. If you have greater
way to do like this, please tell me.
Thank you.

Please suggest on this..
Thanks.

How to clear the delivery group in sales order?

Dear All:
My sales order is auto created from CRM by BAPI, but in vbap table, the GRKOR field is 001, only one order , how to clear the delivery group in the sales order ?
Regards
Peter.

Thread Locked - Reason Duplicate Post
How to clear the delivery group in sales order?
Please dont post the same query twice. Continue all your queries in one thread
G. Lakshmipathi

How to clear the line items...

hello friends,
I am not able to clear line items with F.13 transaction for special G/L Account..i am inputing the values with the Transactions F-48 and F-43(In each transaction v have assigned the same assignment (BSIK-ZUONR)) line items has to be cleared based on Assignment....we can view the details in Tr.code-FBL1N.
Can any one help me...plzzz
vamshi

Hi PK,
1. Should we maintain OIM for all Excise G/Ls (BED, ECess, SHECess)?
- Please DO NOT maintain OIM on BED, ECESS and HECESS, only to be maintained for Cenvat Clearing Account. Also note that clearing of Cenvat Clearing is not easy, as in standard SAP, the assignment field is not updated with the same information for the Dr. and cr. line items of Cenvat Clearing Account. You need to use an exit in Substitution for it to populate the P.O. no. and line item at the time of MIRO.
2. How to clear the BED Excise GLs which is with OIM in our system, it is thru F.13 only?
You can use F.13 only if the entries are matching not otherwise, else clear all of them manually if you have good control of your account balances.
3. Can we activate or deactivate OIM any point of time, I mean can it be activated in case the G/L balance amount is not ZERO?
OIM activation for a GL - Refer Note No.1356457.
OIM Deactivation : You can deactivate OIM after making the balance Zero on that Account and by changing the Message No. FH 190 to warning in OBA5.
4. What is the use of T Code J2IUN, I have gone thru the SDN links, but I am not able to execute the screen. What parameter should we select while executing J2IUN, when we use Pay cenvat from ser tax cr and Pay ser tax from cenvat cr.
J2IUN is to utllize Excise Duty. The liability of Excise duty is utilized from Excise balances of BED, PLA , Service tax etc.. as per business requirements.
Hope this helps you.
Regards,
SAPFICO

How to clear the line items once posted...

hello experts,
i m workiing on Enhancements in fi/co...i m not able to get the actual exit..
How to clear the line items once postings has been done...i.e. once v do postings in f-48 v assign an assignment with special GL a/c as 'A'(one line item generates)....and in Tr.code f-43 once the due as been settled i.e the payment as been done and same assignment has to be given(2nd line item generates) it has to clear with the transaction f.13.but it is not..there is a report program to check fbl1n(tr.code)...once it is cleared it is shown in cleared items else it is shown in open items.....can any one help me out...
i m providing the tech names of the fields...
same program for both the transactions-- sapmf05a screen no for f-48--304 and
f-43 ---110....
Assignment --- BSEG-ZUONR....AMOUNT ---(cluster table) BSEG-WRBTR....
SPECIAL GL A/C RF05A-UMSKZ(structure)
thanks n regards,
vamshi

The prerequisites are:
1) In the customer master sales area data, shipping tab, there is a field called Order combination. u must tick that.
2) for the two orders, the sold to party & ship to party must be same
3) both orders must have created from same plant & shipping points
4) the line items must have same loading grp.
5) the both orders sheduline line date must be same.
transaction code for the same is VL04.
enter the required data and select the order nos to be processed.
Do reward points if it is useful

How to print the MICR symbols in sapscript for Cheque printing

Hello All,
I am working on the cheque printing. I want to display check number with MICR symbols like in the original cheque we have at the footer level the symbols.
How to print the MICR symbols in the SAP Script. Could anybody please help me out in this issue.
Thanks

Hi,
In This case your Printer should support the E-13B Charecters.
Create a ParaGraph with Font family as MICR_E.
use C for ON-US SYMBOL which is printed at the beginig and end of the Check Number
ie C&CHECK_NUMBER&C
then use A for TRANSIT NUMBER and
Use D for DASH SYMBOL in your check.
then while Printing the check the original check number will be printed .
Note: Your Printer should support the E-13B charecters
Thanks.
UmaS.

How to clear the down payment against the vendor invoice in the payment program?

A down payment is made $25 Later an invoice is posted for $100 Now i want to Pay $75 to Vendor But the Automatic payment program is not clearing the down payment against the vendor invoice. Could you please help how to clear the down payment against the vendor invoice in the payment program?

Swathi,
Need your help i have a strange situation
1) F-48 and document posted with document no = 15..... in company code = L002 with payment block getting populated automatically
2) F-48 and document posted with document no= 15..... in company code = Us11 without payment block and the screen does not even show payment block, I had to check this from BSEG table
My question is
a) How and where does this payment block is triggered through configured and how to process next steps.
b) when I use F-48, how do we do the actual payment, is there a check printing and linking it to the KZ document or is check printing done outside the system and the KZ document type does not have any linkage.
c) If I do FB60 for a higher amount how do we pay partial amount.
Your response is appreciated.

How to clear the notification symbol circled in Red?

Similar Messages

Maybe you are looking for