How to clear the open documents in case if document currency and local curr

Hi,
Can anyboday advise how to clear the open document of a particular vendor for a particular company code. Here the issue is that balace is netted to Zero in the document currency but not in the local currency. The document was posted in Currency CAD and the local currency is GBP.
When i check the FBL1N, there is it showing net balance is ZERO, but document is still in open
status. I tried using Transaction code F-44, but it is not allowing me.
Can anyboday advise how to perform this. Points will be awarded.
Regards,
Sree.

Hi,
In the Company code global parameters(OBY6),select the check box "NO FOREX RATE DIFF.WHEN CLEARING IN LC"
and try clearing again.(You can have a F1 help on the check box to see what exactly it is).
Hope this will resolve
Assign points if useful
Thanks
Aravind
Edited by: Aravind Aitipamula on May 22, 2008 1:36 AM

Similar Messages

How to clear the open items and parked items for customer

Hi Experts,
I need to clear the open items and parked items for customer.
So any one could let me know the transaction code and procedure for clearing the items for customer.
Best regards,
Kesava balaji.

Hello,
Parked items will have NO RELEVANCE, unless you post it.
You CANNOT clear parked items.
You can clear the posted items using F.13 or F-32
Regards,
Ravi

How to clear the open item for non-leading ledger?

Hi, Experts,
I have two valuation area VA001 and VA004 and two accouting principle GAAP and IFRS.
Then I assign VA001 to GAAP (post to leading ledger) and VA004 assgin to IFRS (Post to non-leading ledger "IF").
There are two ledger group ,one is 0L and the other is IF.
When i run TBB1, system generate 2 FI documentes.
Then I run F13E to clear the GL account, because some GL is open item management.
But only ledger 0L is cleared, the other non-leading ledger "IF" is not cleared.
I don't know is there any possiblity that system will clear open item for leading ledger and non-leading ledger together?
TKS a lot.

Hi Louise,
you do posting in TRM, but clearing is done in FI, so I moved the thread.
BR, Tomislav

How to clear vendor open documents

How to clear vendor open documents, I had previously tried to clear the documents in PRD with transaction F-44 and I get the following message.
X. Ex.rate diff.accts are incomplete for account 00015080 currency CAD

You can clear using the t code F-44 which is manual or by using F.13 which is automatic.
The error you are getting is with refernce to a transaction between your Local currency and Currency "CAD"
Maintain a transalation ratio and the exchange rate. Here the system also looks for a exchange loss or gain on such conversion also. Map those accounts and you will be clearing the transaction.
If you are using automacti clearing you need to decide on the link(Common feild) between the DR open item and CR open item and these open items after having this as a refernce can be cleared automatcially in F.13.
Hope you understood.
Reward points if useful.
sarma

How to clear the Payment Document when posting cashed checks.

AIM: To clear the payment document when the check is cashed.
I am creating a Payment Document (Doc type ZP) using fb01. Then I am creating a check against this payment using FCH5. Once check is created, I am posting cashed check using FCKR upload. FCKR is working fine and marks the check as cashed.
ISSUE: The FCKR is working correctly and the check is being marked cashed in FCHN. But if I click the Accompanying document and click on payment document, the payment is still open. Why is this? How do I clear the payment doc?
Please advice.

Hi,
By using T code F-03, you can manually clear the open entries in GL account, if that GL account is open item managed in GL Master.
Thanks and Regards
Binoj M D

Document is getting posted but unalble to clear the open items

hi gurus,
i m using the inbound idoc ACC_DOCUMENT03 to post the receipt against invoice. uptill now i can post the receipt but it shows the items are still in the open items. i need to clear the open items for the invoice. how to solve it .

Hi,
In the Company code global parameters(OBY6),select the check box "NO FOREX RATE DIFF.WHEN CLEARING IN LC"
and try clearing again.(You can have a F1 help on the check box to see what exactly it is).
Hope this will resolve
Assign points if useful
Thanks
Aravind
Edited by: Aravind Aitipamula on May 22, 2008 1:36 AM

(Need Help) how to clear the recently opened file list on Flash Player 11?

excuse me pals, may i ask how to clear recently opened file list under "File" tab on Flash Player 11 (the standalone player) ? i've tried to browse my registry but i can't find the solution (and i can't find the .mru files containg the list). my OS is Windows 7 32bit, i hope i can find solution here

I found it in the Windows registry under HKCU\Software\Macromedia\FlashPlayer

How to iterate the opened pdf document?

How to iterate the opened pdf document?

Thanks for your response. Could you please advise me how to call a following "DocExistEnable" method.
static ACCB1 ASBool ACCB2 DocExistEnable(void *data)
if (AVAppGetNumDocs() <= 0)
return false;
else
return true;

Reversal FB08 Creating New OPEN ITEM instead of clearing the open item.

Dear All,
My user has an issue whenever he does any reversal Tcode - FB08 in one of the general ledger "Cash in Transit" nature "open item" & "Line item" instead of clearing the open it it creates a new open line item.
I have checked in Table BKPF , the reversal number is being updated but this items are still appearing open item in FBL3N and not appearing in F-04 (all reversals) for clearing.
Can any one share what can be the reason its creating new open item and how can i solve the issue for clearing the account.
Thanks & Regards
Pravin

hi
Please check following cases
- whether this is happening in all the reversal cases of Cash in transit
- Whether is user is just using FBRA (Onsly resetting) and not going for reversal
- Chances would be one or two partial clearing may have taken for single document for the offsetting accounts
Thanks
Sandeep

How to clear vendor open items if vendor invoice currency and payment currency different

Hi All.
How to clear vendor open items through f-44 if vendor invoice currency is EUR , payment currency is USD but local currency is INR
while clearing through f-44 system showing error as "to large for clearing clearing is not possible"
I checked all configuration, configuration wise no problem
BR.
Chandra

Hi Chandra,
You chose any one of the currency i.e. EUR/INR/USD for clearing in F-44. After selecting line items for clearing, system will show a difference. Click on over view button and manually write off the difference by selecting any one account i.e. dummy or small diff.account, after that click on process open items then system will show the difference 0 and simulate the document, here system will post gain/loss exchange GL postings along with other line items. After save the document, manually pass journal entry to dummy account and gain/loss account. I have explained clearly in the below example.
Invoice is in USD - 1000 & INR - 60000
Payment is in INR - 60000
Now I am going to clear these in INR currency in F-44 on 31.03.2015. On this date the exchange rate for USD is 60.10. At the time of clearing system will post the below entry
Vendor A/c Dr 60000 (invoice)
Vendor A/c Cr 60000 (Payment)
Gain from exchange rate A/c Cr 100 (60000 - 60100)
Small diff.write off A/c (or) Dummy A/c Dr 100
After done the above posting, we have to pass below manual JV in FB01
Gain from exchange rate A/c Dr 100
Small diff.write off A/c (or) Dummy A/c Cr 100
Regards,
Mukthar

How to find the Open sale orders till date for given plant and material ?

Hi experts,
                 I have a requirement to calculate the open sale orders for a given plant and material. I have tried in VA05 wherein i can get only for the material and sales area combination. From the document nos obtained from VA05 i can then find the plant. But my question is how do i get the output of VA05 into my progra. (can i use submit for a module pool report ).
Also if ther is some other standard table or Function module to find the open sale orders till a given date ,it will be even more helpful....in which case i can drop the VA05 route.
Kindly help
Thanks in advance
Ashwin

Hi Ashwin,
    You can use SAP Tables VBAK and VBUP to get to know if the document is complete or not.
   VBUK-GBSTK is the field that will give you the status of the Sales Order .
VBUK is used at header level , whereas VBUP is used for Item level.
So in your case what I would do is :
Get the Sales Orders that satisy the plant and material criteria from VBAP table , take this Sales Document numbers and go to VBUK or VBUP table to get the Sales Order Status.
   If I need to find the open quantity as well I will link to VBFA table based on the document number.
Reward if helpful.
Thanks,
Imran

Error while clearing the open items - Error Message GLT2152

Dear Forum,
While clearing the open items in the Customer Account with the Bank receipt we get the error message -
Account Determination 01001/missing Message No. GLT2152 The following error occured for the document you entered -
The online document splitting is active in the system.
The account determination does not exist yet and document cannot be posted.
Procedure - Either check the splitting rule or create the account determination key.
Would need your help as to how to resolve this and what to check.
Thanks!
Regards

HI Murli,
Thanks for the prompt response, I have checked in OB09, this refers to the Account Determination for OI Exchange Rate Differences and the entries maintained appear to be ok. What else could be the issue?
Regards

Dreamweaver CS4 Clear the "Open a Recent Item" window

Dreamweaver CS4 Clear the "Open a Recent Item" window
***** But you must be in the user profile that you created the website with or you will not see the Recent list folder in the registry !!!!!
***** you will have registry rights to Delete files that user created.
**** If you do not have authority, you must find the user profile as an Administrator.
Click Start
then RUN
type REGEDIT in the run box
then in the registry got to,
HKEY_CURRENT_USER
    Software
     Adobe
     Dreamweaver CS4
There will be a "Recent File List" you can delete all the files inside of it.

Why eliminate it? It doesn't require any extra clicks.
The Startup page can be handy to return to documents you have
been working
on, creating new documents and many other features. If you
don't need it
just click on what you do need; .
If you insist, you can put a checkmark in "Don't show again"
"Feadel" <[email protected]> wrote in
message
news:goejan$nrk$[email protected]..
> When we are open Dreamweaver. The dreamweaver have
default pop up start
> up. It saw
Open a Recent Item. How To clear it.

How to clear customer open items by another customer open item

Hi Guru's
I have a problem, we need to assign and clear the open items of one customer with another customer from same company code. is it possible?
for eg: I have a customer X whose Debit balance is USD1000 and Cusomer Y is having Credit balance is 1000. Customer Y is agreed to settle the amount to customer X.
since customers are not related , we dont maintain any relationship in SAP. how do we post and clear the open items?
please let me know the procedure.
regs
kumar

Hi,
When the moment you finish choose open item for 1st customer and then you have to press F7 (Charge off diff.) new screen comes then press F6 (Choose Open Items), then enter required data for 2nd customer (such as customer code, doc number, etc). You can post partially, and residually for this clearing posting.
Good luck.
-dwih-

How to see the Open PO Qty in Mass

Dear Experts,
How to see the Open Qty in PO in mass, is there any report available..Please help
Regards
karthik

use the Txn ME2N
Enter the follwoing details . Scope of list - ALV, Selection parameters- WE101, Plant- XXXX, Enter the document dates From and TO and execute ( F8), You will get all the details, If you want to adjust the format use cntrl+F8 to get the POP_up for selection of fields and use as you wish.

How to clear the open documents in case if document currency and local curr

Similar Messages

Maybe you are looking for