How to clear the quantity field in the items line from the transaction MIGO

Dears.
I need that the field GOITEM-ERFMG from the transaction MIGO comes blank, but, this field have a default value.
I tried to clear this field in the BADI MB_MIGO_BADI, but, this 'clear' does not work.
Somebody knows, where I can insert an enhacement in the program SAPLMIGO to clear the field GOITEM-ERFMG, ever that the user add a new line?
Thanks and Regards.

Check SAPNotes, there are some that have bug fixes for this issue

Similar Messages

How we can Print a field Value in last line of the layout

Hello:
I am doing Check printing report ... Accroding to that I am facing a problem to print a Field value in last line of the layout....Anyone Can help to this please.....

Hello,
Take a look to the example provided in the note :
Note.253881.1 How to Create a Report With a Frame Only on the Last Page at a Fixed Position
Regards

How to truncate the decimals in the ALV report for the quantity field

Hi All,
I have to display a quantity field and units of measure in the ALV output. If the units of measure eq 'PC' i should not display the decimal places for quantity in the alv output, otherwise i have to display the decimals in the output. How to do this....any help would be highly rewarded. I knew that for this type of cases decimal_o will not work.

Hi,
Declare one more Internal table same as output table. In that intead of that quantity field, declare field_name(15) type c.
data temp type i.
Loop at itab.
if field = 'PC'.
temp = qunantity field.
field_name =temp.
else.
field_name = quantity field.
endif.
endif.
endloop.

Change of the quantity field to 5 decimal places in SAP

Hi Gurus,
The quantity field is appearing with 3 decimal places in BOM, Process Order, etc. Is it possible to make the decimal places to 5.
All the decimal digits from SAP are 3 digits. We have an interface through which the data flows from another legacy system (Fow system) to SAP. And the Fow system setting was 5 digits. The issue is some of the raw material requirement qty was really minor and it might be below the decimal 3 digits.
In that case, when the data flows to SAP from Fow system it will cause the material stage failure. so please help me to investigate how to let the SAP also could have the 5 digits decimal. Thanks.
Regards
Brijesh

Dear ,
Its SAP standard ,to put and use decimal places in BOM qty .You can use upto 3 decimal places in BOM qty.
At SE11 you need to see what measure field is linked to the quantity field.Then goto tranaction CUNI and chage the decimal places of the unit of measure for the qty field unit , it will not allow you more than 3 decimal places in case of BOM qty.
You have following choice :
1. With the access key make changes in the standard program and take help from ABAPer
SAPLCSDI, Table Name-RC29P, Field Name- MENGE.
2) Change the base quantity in BOM header to 1000 aand accordingly change the component quantity.
Hope this is clear
Regards
JH

Problem with the quantity field

hi every one
i am facing a problem with the quantity field (vbap-kwmeng)
as per my requirement i need to display this quantity field along with some other item fields from VBAP in an alv grid.
among all the fields displayed in the alv grid only this quantity field is editable(end user can change this quantity)
once end user changes this quantity and press save button i need to capture this new quantity in my internaltable.
problem is input of length of quantity is 15 and the output length is 19
so when i am pressing save
say my quantity is 50 when i am pressing save '0.050' is coming because of the length difference
how can i capture the original changed value.
vamsi

what about define two fields in you inner table ,one as char and the other as vbap-kwmeng, you can show the char one in the ALV gird , when user input value and press SAVE ,you can move the value to vbap-kwmeng.
you can test it,mybe some one has one better idea.

Unit of the Quantity field is displaying in internal format in Bex report

Hi Experts,
I have a BEx Query, in which i have quantity keyfigure added(Examble - Sales Quantity).
When i run the report for a selection the report displayes the unit for the quantity field in internal format.
Examble - instead of showing 10 CS (case), the report is shwing in 10 CV (internal format of unit CS is CV).
Also when i check the cube content, it has the unit updated into the cube as CS for that keyfigure.
Can any one let us know, how to dispaly the report output in external format.
Regards.
Muruganand.K

Hi Gopi,
The property in question is "calculated". This is a property of a context value attribute. So select the value attribute in the context to which your field is bound and view the properties. Set "calculated=true". It will generate the accessors.
In the setter method, add the following piece of code:
public void set<your attribute name>(IPrivate<your component>View.IContextElement element, java.lang.String value)
DecimalFormat df = new DecimalFormat("#.00");
value = df.format(value).toString();
Regards,
Satyajit
Message was edited by: Satyajit Chakraborty
Message was edited by: Satyajit Chakraborty

How can I add a field to a Repeating Frame in the body of a 9i Report

How can I add a field to a Repeating Frame in the body of an Oracle 9i Report whose source is in a higher group?
I want to change an Oracle 9i report. The report has no header or trailer but only a body. The body has the parent frame fields & a repeating frame with four fields, A, B, C & D. They all seem to be in one group. I want to add another field E to the repeating frame whose source is from the 'header'.
I added the field & created a boiler plate & then added the new field, E to the original group A, B, C & D. In the Property Inspector for the field, I pointed the source to the source column in the main query. However, when I run the report, I receive the error "Invalid body size". Some notes on Metalink indicate that this could be due to margins being out of the printable area.
Moreover, after making the changes & after having unsuccessfully run the report, when I try to open the Page Layout for the report, I get no details.
Thanks,

Hi,
i also got same query can u pls tell me elaborately, if u can can u pls send some code.
Thanks & Regards
Jagadeeshwar.B

In smartforms the quantity field is not showing the perfect value .

In smartforms the quantity field is not showing the perfect value because the point is shifting left
insted of showing 8.10 it is showing 80.00.

Hi,
Dont use the quantity field same as that it come from interface Fm declare one field for quantity in the global settings and write the logic to pass the value to that field and pass that global value to the particular texts...same is the case with currency fields also.
Regards,
Rohan.

How to make a text field required at run time when the user clicks the checkbox ?

I got a form where , there are several checkboxes and text fields associated with that checkboxes.If the use clicks on the check box then the associated
text fields should become required.I have tried the change event and the click event for the checkboxes.It gives error in the onChnage event and I got some weird results in the on click event .Sometimes if the user click the check box , then for the 1st time the field doesnt become required , then the user onclicks the check box and when the user clicks the checkbox for the second time the field becomes required,but if i deselects the highlighted field option and selects it again the field becomes required even if the user onchecks it I am totally confused !!! Adding to it i have also written the wrong code still i achieved the desired result ?? How it can be possible . I am writing the codes below , please help me as i am working under a deadline from the client.
onChange event :
var newVal = this.boundItem(xfa.event.newText);
if(newVal == 0)
    xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.Purchasecost3_1" ).validate.nullTest = "disabled";
else
     xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.Purchasecost3_1" ).validate.nullTest = "error";
For the onClick event :
var a = xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row2.CostItemRecovere d_OnlyEnergyCharges").rawValue;
//app.alert(a);
if(a == 0)
    xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").validate.nullTest = "error";
if(a == 1)
      xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").validate.nullTest = "disabled";
   Please help someone !!!

I used the onchange event and wrote the code for it. I got the result . But there is a problem.All these fields are in a table and it's a dynamic table where you can add rows dynamically at the run time .I have other change event for some fields in this table .All are working fine when i add the row.But for this check box the required fields are not validated as required at the run time . I am here giving the code , Please help me .
form1.Subform0.Subform1.Subform9.Subform10.Table48.Row2.CostItemRecovered_OnlyEnergyCharge s::change - (JavaScript, client)
if(this.rawValue == "1")
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L2_1").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L1_2").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L2_2").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L1_3").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L2_3").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L1_4").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L2_4").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L1_5").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L2_5").mandatory= "error";
else
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").mandator = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L2_1").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L1_2").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L2_2").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L1_3").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L2_3").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L1_4").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L2_4").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L1_5").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L2_5").mandatory = "disabled";

Query Alert for a change in value of the Quantity field of the sales order

Hi Experts,
A query alert has been set up to alert the warehouse employee when a new sales order is created by a sales employee. Our client wants the warehouse employee alerted when the sales employee edits the quantity field of an already added sales order.
Kindly assist in designing a query to notify of this change in the Quantity field of the sales order.
David

Try this one:
SELECT T0.DocNum, T0.CardCode, T1.ItemCode, T3.Quantity 'Old Qty', T0.Quantity 'New Qty', MAX(T2.LogInstanc) 'Times Changed'
FROM dbo.ORDR T0
INNER JOIN dbo.RDR1 T1 ON T1.DocEntry = T0.DocEntry
INNER JOIN dbo.ADOC T2 ON T2.DocNum = T0.DocNum AND T2.ObjType = '17'
INNER JOIN dbo.ADO1 T3 ON T3.DocEntry = T2.DocEntry AND T3.ItemCode = T1.ItemCode
WHERE T0.DocStatus = 'O' and T0.DocType = 'I' AND T1.Quantity != T3.Quantity
GROUP BY T0.DocNum, T0.CardCode, T1.ItemCode, T1.Quantity, T3.quantity

Hide the quantity field at goods movements in cofirmation.

HI,
My client is using CO11N for confirmation. and doing auto goods reciept and auto goods issue.
Whn I am clicking on Goods movement in CO11N system is showing me which material is going in goods reciept and which is in Goods issue.
Now my requirement is I want to hide the quantity field of the material in goods movement because some time user is changing the quantity of goods issue.
Wat can I do for the same?
Please sugest
Thanks & Regards,
Nilesh Ithape.

Dear Nilesh,
Try to achieve the same using the authorization control.
You can take the help of the BASIS consultant and try to find the authorization object and the value
which's allowing to change the quantity.
Check whether this is the particular object C_AFKO_AWA is allowing the same(I'm not sure).
After finding out the Authorization object remove the tick mark for the value which's for change or delete.
You can find it using SU24 T code or using SUIM and other related T codes.
If it cant be done even after authorization control ,revert back to the forum.
Regards
Mangalraj.S

How do i have subsequent fields label and values move down the page dynamic

how do i have subsequent fields label and values move down the page dynamicly...
the field in question "can grow" and can become quite big...overlaping the content of the fileds below...how can i make the fields below this large field move dyanmically so there is no overlap?

if it is the same field and it is set to can grow you just need to make sure you put space between by inserting a section below

AP Invoice interfaced to Projects shows the amount in the quantity field

We are noticing that AP Invoices interfaced to Projects show the invoice amount in the quantity field, e.g. in projects quantity and cost both show the invoice amount. The actual quantity is different. Anybody experienced that or has a solution?

Hi User,
This is intended functionality of Oracle projects:
For AP invoices the QUANTITY = ACTUAL AMOUNT (eg 1000) of the AP invoice at the distribution level and UOM = word "CURRENCY".
Incase of labor expenditures the quantity = the number of hours and UOM = HOURS.
Please revert incase more information is required on this issue.
Thanks & Regards,
Neeta

In ML81N, Quantity Field allows maximum 3 digits after the decimal.

Hi Everyone!
        Hope things are going good.
        In SES, ML81N, The Vendor has a total invoiced value of $9033.5 .
        The Gross Price of the Product is USD 13,333.33
        The Quantity entered is                        .667 or .668.
         Both of the quanities entered gives a value which is $6 more or less.
        The only way to arrive at $9033.5 is to use quantity .6675 and the Quantity field does not allow the entry of more than 3 decimal digits.

Dont change the domain, as this has a huge impact on your system. At least talk to SAP before you are doing that.
I am just the opinion that you have a wrong unit of measure for your material.
You did not say what unit you use, but if it is KG, then you better use Gram to meet your requirement.

HT4906 I tried to do the update but it reads that I don't have enough hard drive to do the update. How do clear up space on my hard drive to do the upte????

I tried to do the update but it reads that I don't have enough hard drive to do the update. How do clear up space on my hard drive to do the upte????

That is hard to say, as we do not know what you keep on your hard drive.
To free space
empty the trash, both on your Desktop and the Aperture Trash,
Delete files and folders you do not need
Move files to an external volume.
There are utilities that let you find large files, like Omni Disk Sweeper, but that is not a free application.

How to clear the quantity field in the items line from the transaction MIGO

Similar Messages

Maybe you are looking for