How to close 5800 wlan connection that's "already ...

plz help me with my nokia 5800Xm with this error: WLAN CONNECTION ALREADY ACTIVE, close it and try it again..   what should I do?? HELP ME..
5800xm
version : 21.0.025
where do i disconnect that unknown running WLAN connection
edit: topic added.
Message Edited by vandelay on 11-Aug-2009 11:17 AM

I fixed  this problem yesterday  it's so simple 
1-you need to back up you device
2-remove the memory card
3- switch off the device
4- it's kinda tricky but you need two people to do this press the red,green,camera and power button
if you do it correctly you will feel vibration and then it will start once again .
And there you have it hope this information was useful

Similar Messages

  • I buy for mac app but not for the iPad, so how do I reinstall a program that has already purchased? I need help because I bought the imovie'11 but when he opened it only brought 8 movie trailer templates instead of the 15 it says on the program. How do I

    I buy for mac app but not for the iPad, so how do I reinstall a program that has already purchased? I need help because I bought the imovie'11 but when he opened it only brought 8 movie trailer templates instead of the 15 it says on the program. How do I solve this problem? Once paid for a program incomplete. I also liked that the AppStore itself had a button to reinstall programs already bought, because it is very hard to understand how to do this in the store, only option is to install and hide purchase, and how do I reinstall, attention'm talking about reinstalling a computer mac, not an ipad or iphone.
    Thank you.

    Prodesigntools.com , go ahead and download the software from there and use your serial number to serialize it.

  • How do you gift an app that you already own ?

    How do you gift an app that you already own ?

    Stickflea wrote:
    Disney Mickey Mouse Vol. 1
    I just tried this on my iPhone 5 (iOS 6.1.0). I did an iTunes Store search for "Mickey Mouse"...
    After the search result:
    1. Panned over to "Disney Mickey Mouse Vol. 1"
    2. Tapped the icon
    3. Tapped on the right-facing arrow next to "Info"
    At this point nothing happened no matter how many times I tapped the right-facing arrow next to "Info"
    I then:
    1. Tapped the Search button at the top left which took me back to the initial search results.
    2. Tapped on "Mickey Mouse Clubhouse Vol.1" (a totally different title)
    3. Tapped on the right-facing arrow next to "Info"
    Then I was presented with the options dialog which includes "Gift"
    I then went back to:
    1. "Disney Mickey Mouse Vol. 1"
    2. Tapped the icon
    3. Tapped on the right-facing arrow next to "Info"
    At this point, I was now presented with the options dialog which includes "Gift"
    So in my case, going through the motions with a -different title-, then going back to  "Mickey Mouse Clubhouse Vol.1" fixed it for me.

  • How do i finish a download that was already started and not finished because the library closed befo

    how do i finish a download that was already started and not finished because the library closed before it done

    What are you trying to download and how were you downloading it?

  • How can I delete old movies that I already purchased, which are saved in my account? Actually I don't want them to be viewed by others who use same account, so is there any solution to delete them? Please advise. Thank you

    How can I delete old movies that I already purchased, which are saved in my account? Actually I don’t want them to be viewed by others who use same account, so is there any solution to delete them? Please advise.

    Delete Purchases = No.
    But there is this...Hiding and unhiding purchases
    iTunes Store  >   http://support.apple.com/kb/HT4919

  • HOW TO REVERSE A JOURNAL BATCH THAT HAS ALREADY BEEN REVERSED

    제품 : FIN_GL
    작성날짜 : 2006-05-30
    HOW TO REVERSE A JOURNAL BATCH THAT HAS ALREADY BEEN REVERSED
    ===============================================================
    PURPOSE
    이미 Reverse된 원 Journal을 Reverse전 상태로 돌리고 싶을？？
    Explanation
    아래와 같이 원 Journal의 reference를 끊으면 원 상태로 복수시킬수 있다
    Example
    update gl_je_headers
    set accrual_rev_je_header_id = '',
    accrual_rev_period_name = '',
    accrual_rev_status = ''
    where je_header_id = <YOUR JOURNAL ENTRY'S JE_HEADER_ID>
    Reference Documents
    Note 1031929.6

    Hi there,
    Not exactly sure what you wanna do... but here is what I've understood...
    You can remove any old Transport Set in your Portal by going to the Browser Transport Sets within the Builder page over the Administer tab.
    As to import a new Transport Set into the Production server, what I suggest is that you make a valid backup (so that in case you have any problem it is easier to revert back) and later on override it (or if it is a major change, it would be better to drop the Page Group and reimport it clean) or import it clean to your Production server. Validate all things... and that's it.
    I hope it helps...
    Cheers,
    Pedro.

  • HT1386 how do you sync your photos that are already on your iphone to your computer

    how do you sync your photos that are already on your iphone to your computer ?

    why use software when you can do this http://support.apple.com/kb/HT4083

  • How to close JDBC client connections in JSP (9IDS Jdeveloper)

    Can anyone tell me how to close JDBC connections neatly through JSP in Oracle 9IDS Jdeveloper.
    I have a developer who has deployed a WAR file (comprising JSP page) to the Tomcat webserver.
    The page works fine except that it always leaves a JDBC client connection after the user closes the internet explorer window.
    I've tried using dead connection detection without success.
    At the operating system level, I have a script that can kill these sessions but I would prefer if theres some way the connection can be closed neatly through the JSP application.

    Hi:
    At database level you can:
    See CONNECT_TIME and IDLE_TIME options to CREATE/ALTER PROFILE
    Joao

  • How to execute "netsh wlan connect SSID", but SSID has space and quotation marks?

    Dear all:
    I have a wifi roruter with SSID test "3"
    But when I execute following command netsh wlan connect "test \"3\""
    the netsh reply: 未將設定檔 "test " 指派給指定的介面。
    Sorry my windows7 is chinese version, but as you can see, netsh detect my SSID as
    test, not test "3".
    Does everybody know how to use netsh to connect to a SSID, and these SSID has space and quotation mark both?
    Regards,
    Joseph

    Hi Joseph,
    Firstly, please modify your SSID name to make sure it do not contain spaces or special characters. SSID name is the router setting. please go there to change SSID name.
    In addition, If only one SSID is specified in the profile, then the specified SSID is used to connect, and the ssid parameter is not required. If the profile specifies multiple SSIDs, the ssid parameter is required.
    Therefore, I would like to suggest you run command as this syntax:
    netsh wlan conncet ssid=Your SSID of the unsecured wireless network name=Your current profile name
    To do this, please refer to the section “connect” in the following document:
    Netsh Commands for Wireless Local Area Network (WLAN) Preliminary
    http://technet.microsoft.com/en-us/library/cc755301.aspx#bkmk_wlanConn
    Karen Hu
    TechNet Community Support

  • 5800,Wlan connection appears as 'unknown', however...

    Hi to everybody!.
    I have an issue with wlan connections. I defined a new access point in wireless connections, and I put it into the 'internet' destination. The access point is saved as WLAN_XX, and works perfectly.
    As soon as I disconnect it, and click to find wireless connections, something rare happens. When there is high signal, the connection appears as 'known'. However if there is low signal, appears as 'unknown'. Therefore I have to configure it again as a new connection (retyping the wep password),which as a consecuence, is saved as 'WLAN_X01)'.
    I updated the firmware from 31.0.101 to 40.0.005. A saved connection always showed as 'known' (even when i had not enough signal to connect) when i used the old firmware (31.0.101). I don´t know if it´s a new feature or a bug or how it´s solved, someone knows? Thanks.

    angel_apm wrote:
    Hi to everybody!.
    I have an issue with wlan connections. I defined a new access point in wireless connections, and I put it into the 'internet' destination. The access point is saved as WLAN_XX, and works perfectly.
    As soon as I disconnect it, and click to find wireless connections, something rare happens. When there is high signal, the connection appears as 'known'. However if there is low signal, appears as 'unknown'. Therefore I have to configure it again as a new connection (retyping the wep password),which as a consecuence, is saved as 'WLAN_X01)'.
    I updated the firmware from 31.0.101 to 40.0.005. A saved connection always showed as 'known' (even when i had not enough signal to connect) when i used the old firmware (31.0.101). I don´t know if it´s a new feature or a bug or how it´s solved, someone knows? Thanks.
    This is normal. You can delete this access point from the settings and re-save it.
    If you want to thank someone, just click on the blue star at the bottom of their post

  • How to close all active connections in Times ten database

    Hi,
    I am new to Times Ten database.
    Uisng ttsatus utility I am able to find our the active conenctions but not sure how to close this. I m using windows as OS
    Request your help in this regards
    Regards,
    Harmeet

    Is there a way to manually kill a lock from a transaction or roll back transaction etc.
    In oracle, we just kill the user session.
    I have an issue with read-only cache, stuck with the below lock.
    I end up in bouncing the dameon (!!@!@)
    stopping cachemanager took time.. but still this lock was active.
    ========================
    [ttadmin:lmmk672@MARTD] /psimofmmk2/TimesTen/palmttd1/bin > ttXactAdmin palmttd1
    2012-05-31 13:48:23.872
    /psimofmmk2/TimesTen/data/palmttd1/data/palmttd1
    TimesTen Release 11.2.2.2.0
    Outstanding locks
    PID Context TransID TransStatus Resource ResourceID Mode SqlCmdID Name
    Program File Name: timestensubd
    12743 0x2aafe00008c0 138.1298 Active Database 0x01312d0001312d00 IX 0
    Program File Name: timestenorad
    13824 0x2aaff8199410 12.83968 Active Database 0x01312d0001312d00 IX 0
    Command 21019064176 S 21019064176
    Table 1732240 W 21018623224 PALM_DBO.EXTRNL_AVAILABILITY_COMBD
    Row BMUFVUAAAAaAAAAJBu S 21018623224 SYS.TABLES
    Row BMUFVUAAAA3AAAAEhq Sn 21018623224 SYS.CACHE_GROUP
    Table 1732480 S 21018623224 PALM_DBO.T10_TEST
    Row BMUFVUAAAAaAAAAIBv S 21018623224 SYS.TABLES
    Row BMUFVUAAAA3AAAADhr Sn 21018623224 SYS.CACHE_GROUP
    Table 1732528 S 21018623224 PALM_DBO.EXCHANGE_TIME
    Row BMUFVUAAAAaAAAALBv S 21018623224 SYS.TABLES
    Row BMUFVUAAAA3AAAAEhr Sn 21018623224 SYS.CACHE_GROUP

  • How can I download a song that's already been purchased?

    How can I re-download a song that's already been purchased, but for some reason, is not on my computer? Is there any way to do this? According to the iTunes Store, the song has been purchased, yet it can't be found under "Purchased" and the song is nowhere in my library. What's going on here?

    Hi Ichinenjuu,
    You are looking in the wrong "Purchased" section (a bit confusing, I know). You need to click on the iTunes Store. Once there, on the right side you will see a Quick Links section - under that you will see Purchased. Click on that Purchased. A window will display with Music, Movies, TV Shows, etc. Click on Music, then on Songs. Also, at the top of the window, you will see All and Not on this Computer/Mac, click on All.
    You should then see a list of all purchased songs, and any that are not downloaded currently will have a little cloud next to them. You can click individually on a particular cloud to download that song, or you can click on Download All at the bottom to download all that are not currently on your computer.
    Post back if you have questions!
    Cheers,
    GB

  • How to stop an software upgrade that is already in progress

    how do i stop an software upgrade that is already in progess.

    You could always pull the plug or shut off the device.  But that might cause some problems.
    Why are you wanting to stop the upgrade?  What's wrong?

  • How can I errase email address that i already erase from the address book

    How can I erase old email addresses that I already erase them from my contacts, and keep appearing on the "TO:" line, when I want to send an email?

    Go to Mail menu > window > Previous recipients > where you can delete previous contacts to your heart's delight.
    Then, in the same menu > window > Address panel will allow you to remove others by their places in particular groups.
    PS  Please do not post the same message more than once.   It can cause confusion.   I have mentioned your previous message to the hosts, who may remove it.

  • How to close (clear) RD connection broker sessions?

    I have VDI environment (windows server 2012R2) with virtual machine based sessions. Some of users have a disconnected session, when they try to connect to their virtual desktops they receive a message "Your remote session has ended ...."
    In fact there is no active session on virtual machine where users try to conneect, but RD connection broker try to connect users with a session that does not exist. How to clear RD session broker sessions?
    If I try to disconnect session in Server manager I recive next error:
    If I login on users virtual machine I have not see any user session. I try to reboot guest user machine, I try to reboot server with RD session broker role. Any more ideas? 

    Hi,
    Thank you for posting in Windows Server Forum.
    Do you receive any specific Event Id when this issue occurs?
    The issue might happen due to error in Rdpdr issue or RDS device redirector. To resolve this issue, enable the Remote Desktop Server Device Redirector. If you cannot enable the RD Server Device Redirector, replace the existing Rdpdr.sys file. If the problem
    persists, replace the RDPDR registry subkey.
    In addition, please try to update the network card driver and check network adapter properties.
    For disconnecting session and end a user session from RDS Server you can use below PowerShell commands.
    Disconnect-RDUser -Disconnects a user from a session that runs on a remote server.
    Invoke-RDUserLogoff - Ends a user session and closes all running applications.
    Hope it helps !
    Thanks.
    Dharmesh Solanki

Maybe you are looking for