How to close a Fork

Hi,
I have designed a BPM in such a way that the 3 idocs are received by the FORK with matnr as corelation.
The design requires that if atleast 1 idoc comes, the Fork will have to close after a waiting period of 1 minute.
To achieve this 1 added a deadline and a Container operation inside the deadline in the block.
the container operation updates a container variable. This variable is then used in the FORK for endcondition.
When viewing the workflow , I see that the deadline is reached , the contol operation writes the variable .
However this variable when set thru the container operation is not acting as endcondition for the FORK.
How do i achive the endcondition in the FORK after a waiting period of 1 minute. the Fork should close and the next step after the block ie transformtion should be executed.
Please help

Hi rajesh,
What i suggest is to use three wait steps in each of the fork branch and then a container step. The wait step will wait for 1 minute and the container step will increment the value of a container variable. Just check this variable in the End condition of the fork.
So initially <u>count = 0</u>
Fork Start -- Receive1 -- wait (1 min) -- container (say count =1) --Fork End (based on condition whether <u>count == 1</u>)
I think this shld work.
Regards
Suraj

Similar Messages

  • How to close extended classic PO in ECC...

    Hi Friends...
    We are in SRM 7.02 and ECC 6.05 in Extended Classic Scenario. One PO had been created for 1 Quantity 3 years ago. There was no GR/IR document posted against that PO. Now that PO had been archieved from SRM. But still PO is available in ECC with open quantity and also its appearing in the open PO report. Now requester wanted, the PO to be closed in ECC and shouldnot appear in the open PO list.
    How to handle this situation.. How to close the extended classic PO in ECC at this scenario. As PO not available in SRM, we can not do anything from SRM side.
    Your inputs are appreciated....
    Regards
    Sivakumar Kandasamy

    Hi Sivakumar,
    If you mean how to archive PO in MM side, please refer to the following info:
    ====
    In ECC system, if you want to archive a MM PO, please use transaction
    SARA->archive object MM_EKKO.
    456129 FAQ: Archiving in purchasing
    401318 Archiving: Additional information
    ====
    If you want to delete this ECC PO, please use BAPI_PO_CHANGE and
    refer to the following test data:
    Parameters:    PURCHASEORDER      =  XXXXXXXXX
    Parameters:    POITEM
    PO_ITEM                        = 00010
    DELETE_IND                     = X
    Parameters:    POITEMX
    PO_ITEM                        = 00010
    PO_ITEMX                       = X
    DELETE_IND                     = X
    You also need to run BAPI_TRANSACTION_COMMIT after BAPI_PO_CHANGE for updating the change.
    Regards,
    Ivy

  • After the update I don't know how to close running apps? I recall double clicking the main button then hold one app until they begin a jiggling motion. But that no longer works.

    How do close running apps?

    You still double tap the home button and the apps are lined up across the screen. Swipe up on the app preview thumbnail - drag it up off of the screen - and that will close the app.

  • How to close iOS7 apps?

    Prior to iOS7 you simply double clicked the home button to show open Apps and you could then close them all down.  That doesn't seem to happen with iOS7.  Any idea how to close open Apps?
    ... The learning curve beings

    Thanks ...
    That's what I was trying, but I guess I was doing so to quickly.  Once I slowed down they finally moved.  Now ... if the former Apps wouldn't crash I'd be all set, ROFL.  Going to be a learning curve for the developers as well I think.
    So much to learn

  • Can anyone advise how to close apps on iPad with new iOS? I have multiple open and cannot close them.

    Can anyone advise how to close apps with the new iOS?  I have multiple open and cannot close them

    Double-tap on the Home button. You will see a preview of the app above the actual icon. Slide the preview up to kill it.
    Please get the iPhone User Guide (For iOS 7 Software)Sep 19, 2013 - 23 MB.

  • How to close sidebar under ios 8 in order to use the whole screen for reading?

    How to close sidebar under ios 8 so that i can have the full screen for reading?

    Sidebar where?
    In Safari?Tap on the Blue open book icon at the very top of the screen. There are two such icons, it is the one on top you want to tap to close the sidebar.

  • How to close email notifications to senders from HP eprintCenter?

    Hi,
    How to close email notifications to senders from HP eprintCenter?
    Thank you.

    Hi Jack7363,
    Welcome to the HP Support Forums. I gather that you would like to know how to turn off notifications from HP’s ePrintCenter.
    To better assist you, would you please supply some additional information:
    What make/model/product number of HP printer do you have? How Do I Find My Model Number or Product Number?
    How is the printer connected (USB cable, ethernet, or wireless)?
    Do you have an HP Connected account or HP ePrintCenter account?
    Are the emails coming [email protected]?
    Thank you.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • How to close apps on iPhone 4

    I tried everything it says from the web from pressing the hold button 2 times and bottom shows the apps but cannot get the minus sign or get them to wiggle like people say anyone know how to close apps like this. mINE DOES NOT WORK SUPPOSE TO GET A MINUS SIGN OR HOLD TO WIGGLE NO LUCK.

    Maybe a visual will help: https://sites.google.com/site/appleclubfhs/support/advice-and-articles/locking-o rientation

  • How to close goods receipt PO

    Hi All,
    We are using SAP 8.8
    how to close Goods Receipt PO that has been pulled to A/P Invoice with a partial amount of freight ?
    i.e.
    Our GRPO has freight 5000.
    On pressing COPY FROM button in A/P invoice we selected that GRPO
    On Pressing Customize button
    Items in the GRPO appear
    We selected all items and press next
    Freight appears
    We edited freight amount from 5000 to 3000 and pulled GRPO into invoice and saved.
    After this OUR GRPO and freight remains
    Guidance in this is really needed as we want to tally stock
    Thanks
    Malhaar

    Hi Malhaar......
    Does it happen all the time like this reversal of entry?
    Like how you tested in demo this kind of scenario I would suggest you to do this excercise too.
    So that you get knowledge about that and Today you are asking this doubt but after doing this excercise you will come to know the exact effect and next time you can suggest this to others if he has same problem and will become expert in SAP
    All the Best
    Regards,
    Rahul

  • HT1212 how to close apps if your phone is locked because you forgot the password

    I need to close "find my iphone" in order to restore my phone. I don't know how to close this app

    Go to a computer.  Use its internet browser to sign on at http://www.icloud.com
    Go to Find My iPhone there.  Click on your device and choose "Remove This Device".

  • How to close the detach popup on click of a button in the panel collection

    Hi,
    I'm using Jdeveloper 11.1.2.3.0.
    I have an af table surrounded by panel collection. There is a button on panel collection to commit the changes in the table.
    Clicked detach button to view the table in full browser.
    On click of Commit button, the detach popup is not closed. I have set partialSubmit of that button to false. Then also detach popup is not closed.
    Can anybody suggest me how to close the detach popup on click of a button in the toolbar.
    Thanks,
    Vinod

    Hi Frank,
    Thanks for your response. Popup is not closed.
    I tried this approach, when the view tree is navigated on the Detach, I see that the tree is same as if it is traversed on the page without detach.
    Printed client id and UI component class in the while loop, result is as below.
    r1:0:pc1:t3 class oracle.adf.view.rich.component.rich.layout.RichToolbar
    r1:0:pc1 class oracle.adf.view.rich.component.rich.output.RichPanelCollection
    r1:0:ph2 class oracle.adf.view.rich.component.rich.layout.RichPanelHeader
    r1:0:pgl1 class oracle.adf.view.rich.component.rich.layout.RichPanelGroupLayout
    r1 class oracle.adf.view.rich.component.rich.fragment.RichRegion
    pgl1 class oracle.adf.view.rich.component.rich.layout.RichPanelGroupLayout
    db2 class oracle.adf.view.rich.component.rich.layout.RichDecorativeBox
    db1 class oracle.adf.view.rich.component.rich.layout.RichDecorativeBox
    psl1 class oracle.adf.view.rich.component.rich.layout.RichPanelStretchLayout
    ps1 class oracle.adf.view.rich.component.rich.layout.RichPanelSplitter
    f1 class oracle.adf.view.rich.component.rich.RichForm
    Tried with setting partialsubmit property to false on the command button, still the popup is not closed and my Faces Message are shown behind the detach popup.
    Thanks,
    Vinod

  • I am downloading illustrator, during installing, I was asked to close the adobe bridge.  I have no clue as how to close it?

    I am installing the try version of illustrator, I was asked to close the adobe bridge before the installation can be completed.  I have no clue as how to close it

    Error "Installation cannot continue until... Adobe Bridge is closed" | Installation | CS5

  • How to close  or delete a PO?

    Hi
    How to close or delete a PO ?
    I can see to delete the line items .
    But if I wanna delete a PO itself , is it possible ?
    regards,

    Hi Sandeep
    You can flag all items for delete in Purchase Order,
    Go to ME22N and enter purchase order. Select item and click on delete button (which is available just above item details) and save.
    Once you complete mark for deletion, you can proceed for archiving.
    transaction code for archiving: SARA
    Object: MM_EKKO
    also check above link for detail process.
    regards
    Srinivas

  • How to Close a PO?

    Dear all,
    Can anyone pls kindly brief me on how to close a PO
    permanently once for all i.e that no user can able to amend it
    anymore.Though after the following steps been done the PO is
    still amendable by ME22N
    Actions taken:
    1. Checked Item details in delivery column,Delivery completed indicator.
    2.checked Final Invoice indicator
    Thanks
    Sanjay

    Hi Sanjay,
    To close the Purchase ORder follow the below Steps:
    1) In Po Item Detail in Delivery Tab Check Delivery Completed Indicator.
    2) Select the Line ITems which you want to Cancel/Close then Click on Delete Button / Icon below the Line Items so that If any user tries to change the po, It says po item is deleted.
    To Delete Po permanently from System, Please go thru the link:
    http://www.sap-img.com/materials/how-to-use-me98-to-delete-po-from-system-completely.htm
    Reg,
    Ashok

  • How to close an open PO of partial GR and release procedure

    Hi friends,
       I would like to know how to close an open PO where partial GR has done on it and release procedure exists for that particular PO.
        I would also like to know if Invoice is not done for a PO and GR is done, then can we call it as open PO?
    Please clarify
    Thanks
    Jyothi

    hi antony..
      thank u antony a lot...i ve tried it and working fine..
      but can we go in me22n to tick delivery complete for a PO which has already been released? it is showing "u cannot make change because it has already been output
    regards,
    jyothi

Maybe you are looking for

  • I need help creating a list of vertical clickable buttons in an aside

    OK so here is the setup for this site I am working on. http://www.bestmarketingnames.com/default2.php I need to change that list on the left side into real buttons with destination when you click them. Here is a link that i have been tinkering with.

  • Deprecation error

    entry settled through transaction code aiab the amount is Rs.5000/- i notice that ordinary deprecation pass is amount 5001 how is it possible? now i want to reveres that document for wrong deprecation amount 5001/- how can i reveres the entry. please

  • How to assign the regions in the country

    hi    i created the derivation values for region.in maintainrule values i assigned region for country india.but my client has 6 regions in india.when i am assigning the another region system giving the message like Entris overlap correct your entries

  • Macbook pro battery and ac

    Can I use my macbook pro 15 early 2012 always with ac or this can damage battery?

  • Good way to start with the WM programming?

    I follow "Community Contributions" and I'm testing every new WM what's out there. I know C and I would like to write the WM. How did you learn to write your first WM? What would you suggest to starting WM programmer? Reading Xlib (or others) referenc