How to close a frozen warning: I am unable to close the "charicter boarders aren't supported and were removed" warning on my pages. Untill warning is closed I can not save my document. How can I get my document saved?

I have an unsaved document open in pages but can not save it because the, "charicter boarders aren't supported and were removed" warning is open and I can not close the warning. How can i get the warning to close so I can save my document? Can I save the document without closing the warning?

Probably not, but as you will have been unable to make any changes to the document with that warning window open, you're not going to lose anything by quitting (or force quitting) without saving. You'll still have the original document you were trying to import.
I would suggest attempting to open the document in one of the open source Office applications, LibreOffice, Apache OpenOffice, or NeoOffice, each available for download from the linked sites. Once open there, remove the attributes that are causing the warning, save the file (as an MS Word document), then try opening that version in Pages.
Regards,
Barry

Similar Messages

Import warning: Character borders aren't supported and were removed.

I use Pages '08 to create essays for my college classes. These are very basic documents without any fancy layout or graphics. I create the essays in Pages, then export them as a Word document. If I then reopen the Word document using Pages, I always seem to get the error listed in the thread title. How can pages not be able to properly import a document that it exported in the first place? Is there anything I can do to prevent this error?
I've looked in the Pages help, in this forum, on the main Apple support site, and on Google and I haven't seen any mention of this issue. Any ideas would be appreciated.

"I create the essays in Pages, then export them as a Word document. If I then reopen the Word document using Pages, I always seem to get the error listed in the thread title."
The term character used in a character coding context denotes a semantic entity without spatial properties and the term character used in a glyph composing context denotes a stylistic entity with spatial properties. Apple was co-founder of the Unicode project, but that does not mean Apple technical writers distinguish according to the Unicode character-glyph model -:).
If the alert refers to an event in a glyph composing context, then you should check that you have not applied a stroke weight or stroke colour to the type you are setting. As Apple Pages supports both Apple TrueType 1, Apple TrueType 2 and Microsoft's extension to Apple TrueType 1 which is called OpenType, Apple Pages supports typographic features that Microsoft Word does not support.
If the alert refers to an event in a glyph composing context, it is also possible that you applied automatic line layout using the Apple Typography Palette which provides different layout capabilities for different Apple Advanced Typography and Microsoft OpenType files of type, and that these features are not supported by the export/import direction into Word or the export/import direction back into Pages.
If the alert refers to an event in a character coding context, then the alert should be rewritten as it makes no sense to speak of stylistic attributes in relation to semantic entities. In other words, someone should rewrite that alert string for Apple Pages.
Best wishes,
Henrik

I get the following message when i try to open ALL my documents : frozen panes and split panes are not supported and were removed. my documents are blank

i get the following message when i try to open any of my documents : frozen panes and split panes are not supported and were removed. All my documents open blanc!

Hi Louisa,
louisa_16_za wrote:
i work with Numbers on my MiniMac and then save the files as Excel because the university only works with Windows.
Numbers is not an Excel clone. Importing and exporting between Numbers and Excel will eventually build up glitches.
If the university only works with 'Windoze' it might be better if you use Excel or a free version of Office (for example, Libre Office or Open Office).
If your marks depend upon a professor who uses Excel, go with the flow.
http://www.howtogeek.com/187663/openoffice-vs.-libreoffice-whats-the-difference- and-which-should-you-use/
Regards,
Ian

I've just upgraded to OS 10.8.6. Now when I try to export an ipages 09 document to .doc, I get the message "character borders are not supported and were removed," and the file is saved as .pages.

I've just upgraded to OS 10.8.6. Now when I try to export an ipages 09 document to .doc, I get the message "character borders are not supported and were removed," and the file is saved as .pages.

I think you would get more expert advice if you asked this in the iWork forum - its really an iWork question
G

I can not save my PDF file into a Word file document...how do I do this?

How do I convert/save my PDF file into a Word format document?

Hi Thomas,
Please check out our Getting Started Guide: http://forums.adobe.com/docs/DOC-2412
If you have any questions, please let us know!
-David

In Word 2004 I can not save documents or quit. One suggestion is the recent security update. Any suggestins on how to fix?

In Word 2004 I can not save documents or quit. One suggestion is the recent security update. Any suggestins on how to fix?

Security Update 2012-001 Bricks Rosetta programs
I've outlined the restore proceedure here, it covers a lot of bases and explains what is going to occur so please don't be intimidated it's a LOT easier that it appears.
Take your time and comprehend the steps involved and you'll be backup up like before in short order.
Restore method.
#1 Backup your personal data off the machine.
If you get a gray screen or some other hangup upon booting, try holding the Shift key down while booting to enter Safe Mode.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Try Restoring from a TimeMachine or hold option bootable clone
If you have TimeMachine drive, or a hold the option key bootable clone use that to erase and restore from before the Security Update occured.
Obviously if you didn't make a recent backup before the update, your going to have to skip to Step #3.
Note: A TM restore can take a awfully long time, a clone restore takes under 2 hours in most cases.
If you don't know how to restore from TM drive
http://pondini.org/OSX/Home.html
#3 Reinstall OS X 10.6 from disk
If no recent TM or bootable clone then:
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk and Permissions of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
Note: If Disk Uitlity can't repair the drive, then come back to seek further assistance and make sure you have a copy of your data off the machine.
#4 Update to 10.6.8 without Security Update 2012-001
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#5 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
Note: For most users likley Step #3 and #4 is likley all that is needed to be done.
That's it really.
Further Reading:
Learn how to have a OS X drive restore ability using TimeMachine or cloning software
Learn how to clone your entire OS X boot here
http://www.bombich.com/get_ready_for_lion.html
TimeMachine help here
http://pondini.org/OSX/Home.html
Make copies of your original Snow Leopard
http://www.walterjessen.com/make-a-bootable-backup-snow-leopard-install-disc/
Learn how to make a bootable SL USB thumb drive
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
Deciding on upgrading to Lion?
Learn which programs ARE NOT compatible/updated for Lion, Rosetta programs will not run on Lion.
http://roaringapps.com/apps:table
Unverified hacks
Note: You may see a "hack" for this issue floating around, it has had mixed results as people's software is different.
You may want to try it, but it's at your own risk. It has worked fast for some and not at all for others, hopefully over time it will work for all.
The above methods I outline are Apple approved restore methods + based upon experience here and not a quick fix, but are sure to work as Apple recommends such steps themselves.
If at any time you feel this is beyond your capability, please seek local Mac/PC professional assistance before you lose your data.
In fact my steps above are very simple, you might want to have a family member or friend perfrom the proceedure in about a hour or two.
If you don't have any backup, please maintain at least a TM drive, just hook up a new blank external drive and TM will ask you to make a backup, takes some time so let it work.
If your a bit more skilled, a option bootable clone is much superior than TM drive.
Good Luck

I have just downloaded all of my music into the new itune's however all of my music has an "!" buy it and I get an error saying "original file can not be found". How do I get my music back?

I have just downloaded all of my music into the new itues, however; all of my music has an "!" but it and I get an error that says " original file can not be found".
How do I get my music back?

Ok, I had a glitch, forced to restart, and lost my train of thought.
Reinstalling iTunes should fix the major issue that might have gone wrong, perhaps your explaination points will disappear and everything will be peachy again.
But if they don't, you can open the XML file in iTunes Folder using a Text edit program to see what the common pathname is to the iTunes Music folder or where your content is located.
If you moved the itunes folder, it needs to go back.
I can't download iTunes to my Vista virtual machine to test it out right now because iTunes is down, so I can't verify the pathname, perhaps your issue and the iTunes being down are related somehow?
You don't want to import all your music again, but it's a option, but you lose all your playlists, that's what I'm trying to recover.
If oyu don't have a whole lot of playlists, then simply select all the explaimation point music and delete, select File from the menu and import your itunes folder again.

ICal on my Macbook has always grayed the current date. iCal on my MacMini (both 10.5.8) never has until a few days ago but has since stopped. How can I get it to "shade" again?

iCal on my Macbook has always grayed the current date. iCal on my MacMini (both 10.5.8) never has until a few days ago but has since stopped. How can I get it to "shade" again?

At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.

I got a movie (the mist) from the itoons store. My ipad says I can not be played. How do I get this to work on my IPad?

I got a movie (the mist) from the itoons store. My ipad says I can not play it. How do I get this to work????

Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Can any one tell me how to install flash player on powerbookg4.i actully uninstall it to upgrade it but now i can not install new one.it always says get flash player for powerpc when i try to install it after downloading.it is 10.5.8 version

can any one tell me how to install flash player on powerbookg4.i actully uninstall it to upgrade it but now i can not install new one.it always says get flash player for powerpc when i try to install it after downloading.it is 10.5.8 version

Flash Player version 10.1.102.64 is the last version available to PPC Mac users. However, this Flash version won't work for many videos on Facebook, YouTube and other sites. Adobe's latest version, 10.2.x or later, is only for Intel Macs. Adobe will not provide a newer Flash version for PPC Macs.
The message requesting that you download Adobe Flash Player takes you to Flash Player requiring an Intel processor. Doesn't work on a PowerPC processor. I found a hack, installed it & it works with Firefox, TenFourFox & Safari.
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
Hack Allows PowerPC Macs to Access Flash 11 Content
http://lowendmac.com/ed/royal/12sr/flash-11-and-powerpc.html
 Cheers, Tom

HT1338 I have macbook without a firewire port, I have usb 2.0 port, now my os is not working I can not get through apple logo loading , I can not enter safe mode, I can only enter one user mode, how can I backup my data, I have very important data in my h

I have macbook without a firewire port, I have usb 2.0 port, now my os is not working I can not get through apple logo loading , I can not enter safe mode, I can only enter one user mode, how can I backup my data, I have very important data in my hdd

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

HT1349 I can not install iTunes on my PC, I get an error message: "Unable to remove the previous version of Apple Software Update". How should I resolve this problem.

I can not install iTunes on my PC, I get an error message: "unable to remove previous version Apple Software Update"

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get aCode 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Software Updateentries and click "Remove", as per the following screenshot:
Next, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
http://www.apple.com/itunes/download/
Does it go through properly this time?

I have a ipod that had photos synchronised to an old computer that has sinced crashed and the data can not be recovered. How do I recover the photos stored on the IPOD to my new computer?

I have a ipod that had photos synchronised to an old computer that has sinced crashed and the data can not be recovered. How do I recover the photos stored on the IPOD to my new computer?

You'll likely need the assistance of some sort of 3rd party software. Keep in mind that the photos on your iPod are only scaled down thumbnail versions of the originals. So even if you do manage to copy them backt to your PC, they will not be in their full original resolution.
Do a simple Google search for "copy photos from ipod" and you should get a number of hits that can assist you.
B-rock

I lost my laptop, now i can not access my ebook. how can i deactivate my old laptop without accessing it?

i lost my laptop, now i can not access my ebook. how can i deactivate my old laptop without accessing it?

Sorry, but officially Apple does not allow redownloads of purchased items other than iPhone/iPod touch applications and iBooks. It's your responsibility to make backup copies (as iTunes itself advises) in case something goes wrong with your system, as unfortunately it apparently did in your case, and you lose all the information on your hard drive. The official statement of their policy can be found here, among other places.
For apps, look here for instructions on redownloading. For songs, movies, and videos, if you don't have a backup of your purchased items, either on external media or another computer and don't have them on an iOS device (iPhone, iPod touch, iPad), you're probably out of luck and will need to repurchase your content.
If you have your content on an iOS device, post back and someone here can help you get them restored. Otherwise you can try contacting iTunes Store Customer Service (select the "Music Purchases" or "Video Purchases" category, as appropriate, then "Lost or Missing Items". You'll find either an "Express Lane" button - just follow the instructions to get to the contact form - or an "Email Us" button) ") and explaining what happened. Reportedly in some cases Apple has allowed redownloading on a one-time basis. But don't count on it.
Regards.

How to restore ios on iphone 4s? when I connecting itune after extracting it sows can not restore. error (21). how to solve this problem?

how to restore ios on iphone 4s? when I connecting itune after extracting it sows can not restore. error (21). how to solve this problem?

how to restore:
http://support.apple.com/kb/HT1414
error code 21 fix
http://support.apple.com/kb/TS3694#error1015

How to close a frozen warning: I am unable to close the "charicter boarders aren't supported and were removed" warning on my pages. Untill warning is closed I can not save my document. How can I get my document saved?

Similar Messages

Maybe you are looking for