How to close a partially received PO

Hi;
we are working in oracle applications 11i. In Oracle Purchasing we have a PO that is partially received in Oracle Inventory, and the user decided to close due to price changes from the supplier.
Any ideas, please?
Thank you...

I think there is no need to close this po in case of acceptance of the supplier price changes from your side, you can use PRICE VARIANCE on Oracle Payable , so that you can receive the changed price partial shipment in this way

Similar Messages

How to close an open PO of partial GR and release procedure

Hi friends,
I would like to know how to close an open PO where partial GR has done on it and release procedure exists for that particular PO.
I would also like to know if Invoice is not done for a PO and GR is done, then can we call it as open PO?
Please clarify
Thanks
Jyothi

hi antony..
thank u antony a lot...i ve tried it and working fine..
but can we go in me22n to tick delivery complete for a PO which has already been released? it is showing "u cannot make change because it has already been output
regards,
jyothi

How to close receivable period. when unposted item exists.

Hi All,
I want to close May period in receivables. But receive error "APP-AR-11332: You must post all transactions in this period before you close it".
I have already posted in the General Ledger. We ran the Unposted Items Report for may and it did return records but we believe that report is invalid because our General Ledger balanced.
Now, Question is how to close this period..
Please help me in this regard...
Your view will be appreciate..
Thanks
Raman

You must reconsider unposted trascations and post them into GL. Pls check trascations which are showing in "Unposted Items Report".
you also check note and run diagnostic. 11i : Oracle Receivables Period Closing Activity Test [ID 255941.1]
11i / MRC --- Unable to Close AR Period - Unposted Transactions In The Reporting Set Of Books. Items Do Not Get Posted. [ID 232707.1]
regards,

How to create partially received Purchase Order using PDOI?

Hello All,
We are using 12.1.3
We have requirement to create PO with partially received quantity. Can it be possible through Purchase Order Import Interface program? I can not see any column there in po_line_location_interface table for quantity that has been received or shipped. So can anybody tried this scenario. If please revert back with the answer this is very urgent.
Thanks in Advance...!!!
Amol

Thanks Sandeep,
But PDOI allows us to enter quantity_billed on the PO. Have you ever faced such scenarios. Because I am doing conversion and I got stuck at the partial receiving.
Also I have to do a drop ship POs conversion, do you have any code snippet for drop shipment. If yes please share it or else any metalink doc id.
Thanks In Advance......!!!

How to unblock a row which has been partial received?

Dear everyone,
I just have a trouble and need anyone help me.
Here is the case...
There is a PO with a row of 200pcs ordered.
Partial of them, say 50pcs, are received.
Then what happened on that row is that, as you know, the fields in that row except Qty and 'Del. Date' are all blocked, even for UDF.
-- I really need to be able to rewrite info on those UDFs in the row. Is there any way to enable me update data on those UDFs.
Thank you
Tony

Thanks, Gordon
The situation is that the client has a needs to record shipment status for each row (or each item). Continuing the example I gave in the first thread, the client ordered 200pcs on 08/15. later the vendor sends a notification that 50pcs will be delivered on 09/21. It means that the rest of them must be received on or after 10/18. (Because the vendor has a delivery schedule.)
On 09/21, the 50 pcs are received.
on 10/02, the vendor sent the second notification that 30pcs will be delivered. at this time, I need to record the follow info:
"--- 30pcs for 10/18, 70pcs for 11/19(following the vendor schedule) "
there are many rows(items) in a PO.
since the row is partial received, I just cannot update the above info in the row.
thanks
Tony

How to close goods receipt PO

Hi All,
We are using SAP 8.8
how to close Goods Receipt PO that has been pulled to A/P Invoice with a partial amount of freight ?
i.e.
Our GRPO has freight 5000.
On pressing COPY FROM button in A/P invoice we selected that GRPO
On Pressing Customize button
Items in the GRPO appear
We selected all items and press next
Freight appears
We edited freight amount from 5000 to 3000 and pulled GRPO into invoice and saved.
After this OUR GRPO and freight remains
Guidance in this is really needed as we want to tally stock
Thanks
Malhaar

Hi Malhaar......
Does it happen all the time like this reversal of entry?
Like how you tested in demo this kind of scenario I would suggest you to do this excercise too.
So that you get knowledge about that and Today you are asking this doubt but after doing this excercise you will come to know the exact effect and next time you can suggest this to others if he has same problem and will become expert in SAP
All the Best
Regards,
Rahul

Reg: how to reverse the partial cleared items

Hi Gurus
1) how to reverse the partial cleared items
and
user posted wrogly below:
2) actually amount received against invoice but she posted in f-02 insted of f-28 so how to reverse this

Hi,
I think you should do the following:
1. T.code - FBRA - to reset the cleared document.
2. T.code - FB08 - to do the reversal after resetting.
See if it helps.
Regards,
SGP

How to close short PO

Hi all
pl. tell me how to close short PO
eg. my PO qty. is 10 . I had received 7. Now I want to close this PO for remaining 3 qty.
So that in MRP this item qty. come in demand side not include in supply side

Hi,
To short close the PO, select each line item of that PO and tick the delivery complete check box. PO will be treated as completed only after all the items in that PO are marked delivery completed.
Hope this would be of your help, please reward.
Regards
Nikhil

How to close my apple id account

How do I deactivate my Apple ID account? I have people with iphones still trying to message me and I am unable to receive them as their Iphones are still trying to imessage me instead of text message.
Also I no longer have the iphone

HeidrunK Canada
Re: how to close my apple id account
Apr 10, 2014 9:15 AM (in response to imagesbyliz)
Perhaps you might go to your apple account, sign in and delete yourself?
You'll lose stuff saved to that ID.
^^^
I tried this but it won't allow me to do that....I don't have worries about loosing things as I don't have any other apple products or any use for anything that might be saved

How to close a jmf rtp session when the whole file is sent

i am using jmf to Stream a video file from a one client to another, everything seems to be working fine except for the fact that i dont know how to close the prosessor and the session/datasink on the transmitting clients side when the clientis done streaming, i can close it lets say after 60 seconds of starting but i am not able to figure out how make it stop when the whole file is done streaming. i tried using the datasinklistner while sending the video and the following code
public void dataSinkUpdate(DataSinkEvent event) {
         if (event instanceof javax.media.datasink.EndOfStreamEvent) {
             endOfStream = true;
     }but the endofstream event is never received from the datasource.
the problem is that it works fine if i using a 20 second video and i close the datasink and the processor in 60 seconds, the whole file does get streamed but if i have a file longer than 60 seconds then the file just gets cut at 60 seconds.
i also tried to use a sessionmanager with a sessionlistener and a sendStreamListener and the following code
     * SessionListener.
    public synchronized void update(SessionEvent evt) {
     * SendStreamListener
    public synchronized void update( SendStreamEvent evt) {
        System.out.println(evt);
     if (evt instanceof InactiveSendStreamEvent) {
          flag=true;
          System.out.println("done");
     if (evt instanceof ActiveSendStreamEvent) {
         System.out.println("start");
    }i ran the whole code and sent files and everything but neither an activestreamevent nor a inactivestreamevent happens but the file is being streamed properly

user13490676 wrote:
could it be a problem with jmf itself that the endofstream doesnt get generated for the datasource being read from a fileIn this instance, that would be the problem... more than likely, there's something weird about the file, perhaps it doesn't have a duration set in the header and JMF treats it like a live stream.
You could always write a custom DataSource that just passes through the input of a normal data source, and then generate the EndOfStream event yourself... maybe based on a timeout or failure counter? I haven't received any data in x seconds or after x attempts, so I'm assuming the file is done... Or when you've read enough data that the file can't possibly have any more (read >= file header + file data)...

Open ports slow down my internet connection. How to close them? What to do?

My MacBook Pro has massive problems with internet connectivity. At times the connection is blazingly fast, at times unbelievably slow.
I've spoken to my internet provider who was able to inform me that my computer opens up 500-700 ports which is probably what's slowing down the network connectivity. When I'm online with the MacBook Pro, the web gets unstable – also for other connected devices like iPad etc.
The web supporter asked me to run an anti-virus scan which I did – with no results. The problem persists. When my MacBook Pro is not online, there are approximately 15 ports open, when I log on the web that number increases to between 500 and 700.
Is this normal?
Can anyone tell me how to solve this issue?
How do I figure out which application opens these ports? (and how to close them?)
I tried logging into another user account on the computer and the problem seemed to disappear, indicating that it is caused by something run only on my user account.
Hope someone can help me..

Open ports don't slow down your computer. The tech support person you spoke to doesn't know what they are talking about.
Basically, when you are using a web browser, opening a page means that the browser needs to open a connection for each element in the page (e.g., it needs to grab each picture, CSS, and JavaScript file that the page requires). This could be a couple of dozen, or it could be hundreds (and there's no telling what Flash content on the page will do). The browser tries to mitigate things a bit using a cache (you might check to make sure the cache is turned on, but this is the default setting). However, this is how all browsers work and how the whole system is designed to operate. You cannot "close" any ports, and they don't linger open, they remain open only as long as data is being transferred. This is expected and appropriate behavior.
The most likely culprit is that you are receiving poor DNS service from your service provider. Every time the computer sees an address like 'http://www.google.com', it needs to send out a request to figure out what numerical address goes with the human-readable name. If the DNS service your system is assigned to use doesn't respond lightning-quick, your experience is going to be very sluggish.
You might want to add an external DNS service to your list of DNS providers. Go to System Preferences > Network, select the network you are using on the left (Ethernet or AirPort), and click the 'Advanced' button. Click on the 'DNS' tab, then press the '+' button under the left panel. I would add the OpenDNS.com DNS servers. Add the following DNS addresses:
{quote}
208.67.222.222
208.67.220.220
{quote}
Click the 'OK' button. And then the 'Apply' button to save the changes.
That will probably fix the problem. If it doesn't the next most likely issue is either network congestion (e.g., your ISP's network is just too busy; a very common thing for small ISPs and cable Internet service), or the remote site that you are trying to contact is simply not performing so well.

I have opened an attached document .doc in a mail. how to close it? I cannot come back to my mail...

On y recently acquired ipad4, I have opened a word .doc file that I received as an attachment in an email, just by touching it.
It opened directly and I see it very well
My problem is that I don't find how to close it now, and each time I go back in my mail, I get the screen with this file opened, and I cannot go back to my mail.
What is the tip to close this file?
Thanks

You are most welcome

How to close OPEN RELAY on Exchange 2010 EDGE server

How to close open relay on it?
Server passed OPEN relay test and we would like to avoid spammers attackin us.with best regards
bostjanc

Get-ReceiveConnector | Get-ADPermission | where {($_.ExtendedRights -like "*SMTP-Accept-Any-Recipient*")} | where {$_.User -like '*anonymous*'} | ft identity,user,extendedrights
Identity User
ExtendedRights
EXCHANGE-EDGE\Default internal receive co... NT AUTHORITY\ANONYMOUS LOGON {ms-Exch-SMTP-Accept-Any-Recipient}
Recreated RECIEVE CONNECTOR on EDGE solved it.
bostjanc

How do I shut off receiving phone and text messages when I a out of the country but instill want to send and receive emails emails

How do I shut off receiving phone and text messages when I am out of the country. I still want to be able to email and receive email on wifi

Enable Airplane mode followed by turning on wi-fi access.

How to close extended classic PO in ECC...

Hi Friends...
We are in SRM 7.02 and ECC 6.05 in Extended Classic Scenario. One PO had been created for 1 Quantity 3 years ago. There was no GR/IR document posted against that PO. Now that PO had been archieved from SRM. But still PO is available in ECC with open quantity and also its appearing in the open PO report. Now requester wanted, the PO to be closed in ECC and shouldnot appear in the open PO list.
How to handle this situation.. How to close the extended classic PO in ECC at this scenario. As PO not available in SRM, we can not do anything from SRM side.
Your inputs are appreciated....
Regards
Sivakumar Kandasamy

Hi Sivakumar,
If you mean how to archive PO in MM side, please refer to the following info:
====
In ECC system, if you want to archive a MM PO, please use transaction
SARA->archive object MM_EKKO.
456129 FAQ: Archiving in purchasing
401318 Archiving: Additional information
====
If you want to delete this ECC PO, please use BAPI_PO_CHANGE and
refer to the following test data:
Parameters:    PURCHASEORDER      = XXXXXXXXX
Parameters:    POITEM
PO_ITEM                        = 00010
DELETE_IND                     = X
Parameters:    POITEMX
PO_ITEM                        = 00010
PO_ITEMX                       = X
DELETE_IND                     = X
You also need to run BAPI_TRANSACTION_COMMIT after BAPI_PO_CHANGE for updating the change.
Regards,
Ivy

How to close a partially received PO

Similar Messages

Maybe you are looking for