How to close a service PO

Hi,
Can you please let me know how a service PO can be closed?

Hi,
The Delivery complete indicator is not automatically set for services.
You must flag the last Service entry sheet with the final entry flag
to set the Delivery complete indicator when accepting the Service Entry
Sheet or set in manually in ME22N.
Please also check in:
SPRO->MM->Purchasing->PO->Define screen layout
that for reference key PT9F (the one used by services) you have defined the flag
"delivery completed" as optional.
Best Regards,
Arminda Jack

Similar Messages

How to short close a Service PO

Hi Gurus,
How to short close a Service PO like we do for Stock PO by ticking Delivery Completed Indicator.
Regards

Hi,
If u used the Frame work PO document type for the Service PO.
Then change the validity of the PO to short close it.
If u have used the standard Po option then change the qty of the sevices to availed till date.
regards,
sujit

How to Close Service Purchase Orders

Dear All,
Please guide me how to close Service Purchase order if the part services are pending and Net value is not completed or no service entry done.
But still we need to close the purchase order.
Is there any manual provision in Service Entry Sheet or Purchase order ?
Please help.
Shailesh Panchal

Hi,
Activate Delivery Complete Indicator on Service Purchase Orders through configuration.
SPRO-Materials Management-Purchasing-Purchase Order-Define Screen Layout at Document Level-PT9F-Define Screen Layout at Document Level-Optional
Now check all the service purchase orders for which you want to close.
Hope this will help you.
BR,
Patil

How to get warranty service claim from nokia c5-03...

how to get warranty service claim from nokia c5-03 in india because i have problem with nokia c5-03 I Purchase 2 week ago a new nokia c5-03 but from day 1 i facing same problem like 1) app close itself 2) internet browse close if any thing is downloading or downloading over 3) memory full always then i should reboot the phone then it work. 4) ovi map is open it shows memory full close the app So kindly help me how to get warranty service claim from nokia c5-03 in india i am unhappy with nokia c5-03
Solved!
Go to Solution.

i updated software also but the same problem cont... I want to know that nokia will give back money or exchange for other new mobile

Unfamiliar icon & how to get it serviced

I let the ipod go too long without charging...
In addition to the exclamation point/folder icon, sometimes an unfamiliar icon (not one of those seen on the ipod support page) will appear. It has an exclamation and a battery.
The ipod can be recognized by computers and the music and data can be accessed, the problem is that when disconnected from the computer, the ipod will not turn on (except to give the "you have a problem" icons). I've gone thru the reset, charge (which it appears to be doing when connected), update, etc. and that does not help.
So, how to get it serviced?
I've had it for less than 6 months so it should be under warranty. Problem is that I'm moving out of the country in a few days, not enough time to have them get it back to me - and I don't think the warranty is good for outside the US.
I might be able to stop by an Apple store, but so far the genius bars are all booked up, will they look at it if I don't have an appointment?
ipod nano Mac OS X (10.4.3) with Mac

Whats happened is the battery has degraded where you have not charge it in forever.
the Battery with ! Icon is shown here on this page at apple along with a link to steps you may take if it still shows this icon after getting a full charge http://docs.info.apple.com/article.html?artnum=93936
Id say if you keep it connected to a charge and let it charge up for afew hours (Not like afew min or just one hour), then restore it most of the issues will go away.
If connected to a computer to charge, make sure the computer stays on and doesn't go into some "Sleep Mode". If on a laptop plug the lap up to its ac adapter while the nano is charging and don't close the screen down

How to consume WEB SERVICES from ABAP ??

Q: How to consume WEB SERVICES from ABAP program??
     the point here is i am using SAP release 620 and the creation of proxy is out of scenario
     and also no XI.    Its only through ABAP program i need to consume one web service (its a HTTPS one ),
    Using cl_http_client... i tried it but i am totally confused of whats happening ???
Req some senior ppl advice on the same/approach.
any hints will suffice my way of approach...!!!
Please do put in your valuable advices..!!
Thanks in advance..!!!!

Hello Srinivas,
Following is the code for calling web service:
data: client type ref to if_http_client,
      host   type string value 'server url',
      service type string value '8080',
      path type string value '/sap/public/ping',
      errortext type string,
      proxy_service type string,
      scheme type i value 1.
call method cl_http_client=>create
exporting host = host
        service = service
     proxy_host = host
   proxy_service = service
   scheme        = scheme
importing client = client
exceptions
    argument_not_found = 1
    internal_error     = 2
    plugin_not_active = 3
    others             = 4.
case sy-subrc.
when 0.
     write 'Server reached successfully'.
when others.
     write: 'sy-subrc =', sy-subrc.
endcase.
Once you got the client object you can call following methods:
"Set the requrie URL for the web service you want to call. This is not WSDL anyway!!
cl_http_utility=>set_request_uri( request = client->request
uri =' url 2 be called ').
*Then you can call send method with proper inputs for sending request to WS
CALL METHOD client->send
Then you can use receive method for getting the response
CALL METHOD client->receive
*You can get last error in case of exceptions
CALL METHOD cl_http_client=>get_last_error
*Close the client object
CALL METHOD client->close
For more information on full code refer my link in previous replay.
Thanks,
Augustin.
Edited by: Augustarian on Aug 18, 2009 1:49 PM

How to close port 32773 in solaris 9

Hi
Need your kindly assistance to close port on solaris 9.
Have done the rpcinof -p but can't found the port 32773 showing.According to my research, 32773 port is for rpc services.
root@mcisdev # rpcinfo -p
program vers proto port service
100000 4 tcp 111 rpcbind
100000 3 tcp 111 rpcbind
100000 2 tcp 111 rpcbind
100000 4 udp 111 rpcbind
100000 3 udp 111 rpcbind
100000 2 udp 111 rpcbind
100232 10 udp 32779 sadmind
100229 1 tcp 32775 metad
100229 2 tcp 32775 metad
100230 1 tcp 32776 metamhd
100422 1 tcp 32777
100068 2 udp 32780
100068 3 udp 32780
100068 4 udp 32780
100068 5 udp 32780
100011 1 udp 32781 rquotad
100001 2 udp 32782 rstatd
100001 3 udp 32782 rstatd
100001 4 udp 32782 rstatd
100002 2 udp 32783 rusersd
100002 3 udp 32783 rusersd
100002 2 tcp 32778 rusersd
100002 3 tcp 32778 rusersd
100008 1 udp 32784 walld
100012 1 udp 32785 sprayd
100024 1 udp 32786 status
100024 1 tcp 32779 status
100133 1 udp 32786
100133 1 tcp 32779
100021 1 udp 4045 nlockmgr
100021 2 udp 4045 nlockmgr
100021 3 udp 4045 nlockmgr
100021 4 udp 4045 nlockmgr
1289637086 5 tcp 32799
1289637086 1 tcp 32799
300598 1 udp 32813
300598 1 tcp 32827
805306368 1 udp 32813
805306368 1 tcp 32827
100249 1 udp 32814
100249 1 tcp 32828
Have done netstat -a | grep 32773
root@mcisdev # netstat -a | grep -i 32773
*.32773 Idle
*.32773 *.* 0 0 49152 0 LISTEN
Since we don't know the port is tie to which program or services thus we cant comment out anything in /etc/inetd.conf.
Have do more /etc/services and the port not showing inside this file as well.
Kindly assist on how to close the port for tcp 32773.
Your assistance is highly appreciate.
Thanks
Regards
Chew Chen Lai

I am pretty sure rpc is a standalone daemon, and not managed by inetd. Instead check /etc/init.d/ and /etc/rc*** scripts.
There may be some services that require rpc- nfs probably requires it (NFS v4 with kerberos authentication might not.) The idmap daemon used by nfs may also require this (not sure of the exact daemon name..)

How to close Co.Code in FI

Hi,
Can any one explain me how to close a CO.Code and merge with sometoher company code to form a new company.

Yes it is a service from SAP SLO system landscape optimization
I think you are asking for merging a co code
For example if you have a co code aaaa and bbbb and at the end you want only bbbb to be left and all the data from aaaa should be in bbbb
and there will be no trace of aaaa in your system
Call SAP SLO service they can do it for you for $$$ they can also do
1) Change your controlling area
2) Merge your controlling area
3) Merge your co codes
4) Change your chart of account
System Optimization
Modifying your SAP landscape - quickly and reliably
Best practice solutions
§ System landscape optimization § Restructuring productive SAP systems § Spinning off corporate units § Merging productive SAP systems (R/2 and R/3) § Broad range of industries § Development partner for the SAP migration tools § Commercial and technical expert knowledge from just one supplierRead on
Restructuring projects
Every company is subject to changing underlying conditions. Regardless of whether the influences are internal or external, each organizational change makes it necessary to modify IT systems. Amongst other things, changes can result from redefining internal organizational structures, spinning off parts of a company, acquiring other companies, having to harmonize data, or restructuring the IT landscape.
In live SAP systems, this gives rise to tasks such as the following:
§ Changing numbering systems (e.g. chart of accounts, material numbers, customer numbers, and vendor numbers) or key terms (e.g. the names of company codes, plant, or business areas)
§ Changing structures: combining or separating company codes or controlling areas
§ Combining or separating SAP systems
We are a partner of SAP SLO (System Landscape Optimization) and would be pleased to share with you our expertise - in terms of both drawing up a concept and technically implementing such restructuring measures in your SAP system.
Based on the organizational and commercial specifications of our customers, we analyze existing data, pick out suitable conversion tools, and adjust them to meet the specific needs of the project.
Migration projects
One of the most important steps towards operating your IT system successfully is to migrate your data quickly and reliably. There is more to this than just transferring legacy data prior to going live with your new IT system. It is also necessary to migrate data during upgrades in SAP systems that are already up and running. SAP SI is one of the most experienced SAP specialists in this field. Our migration experts played a key role in developing the SAP migration tools and have already implemented countless projects successfully.
We offer you the following services:
§ Data transfer from R/2 and non-SAP systems
§ Concept and management consulting relating to migration
§ Migration consulting in fields relating to SAP
§ Planning and implementation of step-by-step changeovers (coexistence scenarios)
§ Modification of conversion rules to meet customer needs
§ Design and implementation of migration tests in close cooperation with the customer's departments
Advantages for the customer
You will enjoy end-to-end consulting services - based on both commercial and technical viewpoints - thanks to the combination of migration consulting and the expertise of SAP SI's industry center. Having already implemented a large number of complex migration and conversion projects, our conversion consultants have a wealth of experience that they can utilize to benefit you. Moreover, you can draw on the services of just one supplier for all aspects of the project - from planning to implementation and going live - allowing you to rest assured that everything will run smoothly throughout.
SAP SI is the ideal partner to plan and implement individual conversion scenarios for you - so come to us when you need to change over your SAP systems following mergers or restructuring.
For further details Please Contact
Christine Hillenbrand at [email protected]
Phone +49/3 51/48 11-4200
Hope this helps,
Regards,
Ravi
Please assign points as a way to say thanks

How to close Mobile Mouse Server?

I was doing an update on the App Mobile Mouse Server and when it weas ready to install it indicated I needed to close the App before it could install the update. The app is not in the dock and I don't know how to close it. Help Please!!!

Hi,
In the field for local server you just type in the local dns name for your calendar server, mail server etc... Also select which port you want publish externally and the the correct port your service is actually using on your lan (Selected under advanced tab). Make sure your mobile access server can resolv your hostnames correctly. It should point to an local ip. If an nslookup shows your public ip, you have to correct your local dns server (This is often called split dns configuration.)
To access this from outside your LAN you have setup NAT and permit the port you have configure your mobile access server to be the incomming port. How exactly you do that on the airport I am not sure, but I am sure it is explained in the user manual for the airport.
I found this video about the mobile access server on youtube: http://www.youtube.com/watch?v=_VRgl2bncZU
Hope this helps.
Bernt

Open ports slow down my internet connection. How to close them? What to do?

My MacBook Pro has massive problems with internet connectivity. At times the connection is blazingly fast, at times unbelievably slow.
I've spoken to my internet provider who was able to inform me that my computer opens up 500-700 ports which is probably what's slowing down the network connectivity. When I'm online with the MacBook Pro, the web gets unstable – also for other connected devices like iPad etc.
The web supporter asked me to run an anti-virus scan which I did – with no results. The problem persists. When my MacBook Pro is not online, there are approximately 15 ports open, when I log on the web that number increases to between 500 and 700.
Is this normal?
Can anyone tell me how to solve this issue?
How do I figure out which application opens these ports? (and how to close them?)
I tried logging into another user account on the computer and the problem seemed to disappear, indicating that it is caused by something run only on my user account.
Hope someone can help me..

Open ports don't slow down your computer. The tech support person you spoke to doesn't know what they are talking about.
Basically, when you are using a web browser, opening a page means that the browser needs to open a connection for each element in the page (e.g., it needs to grab each picture, CSS, and JavaScript file that the page requires). This could be a couple of dozen, or it could be hundreds (and there's no telling what Flash content on the page will do). The browser tries to mitigate things a bit using a cache (you might check to make sure the cache is turned on, but this is the default setting). However, this is how all browsers work and how the whole system is designed to operate. You cannot "close" any ports, and they don't linger open, they remain open only as long as data is being transferred. This is expected and appropriate behavior.
The most likely culprit is that you are receiving poor DNS service from your service provider. Every time the computer sees an address like 'http://www.google.com', it needs to send out a request to figure out what numerical address goes with the human-readable name. If the DNS service your system is assigned to use doesn't respond lightning-quick, your experience is going to be very sluggish.
You might want to add an external DNS service to your list of DNS providers. Go to System Preferences > Network, select the network you are using on the left (Ethernet or AirPort), and click the 'Advanced' button. Click on the 'DNS' tab, then press the '+' button under the left panel. I would add the OpenDNS.com DNS servers. Add the following DNS addresses:
{quote}
208.67.222.222
208.67.220.220
{quote}
Click the 'OK' button. And then the 'Apply' button to save the changes.
That will probably fix the problem. If it doesn't the next most likely issue is either network congestion (e.g., your ISP's network is just too busy; a very common thing for small ISPs and cable Internet service), or the remote site that you are trying to contact is simply not performing so well.

How do know which services use up my data on my tablet? 2:How can I avoid this?

How do know which services use up my data on my tablet? 2:How can I avoid this?

@mwbail2,
Great question! Managing your data usage is definitely important. You can view what apps are using data by going to Settings and then Mobile data on your phone. There is will show you the apps using data.
If you want to avoid the data usage on the apps you want to make sure you close out the apps when not in use. You can also make sure that they are not automatically updating whenever there is a new update to the app. To do this simply go to the Play Store and select Menu. Then go to Settings and there you will see the option to change the auto update to update over wifi only.
If you want to complete turn off data, just go to Settings and then mobile network and turn it off. Keep me posted if you need further assistance.
JohnB_VZW
Follow us on Twitter @VZWSupport

How to close extended classic PO in ECC...

Hi Friends...
We are in SRM 7.02 and ECC 6.05 in Extended Classic Scenario. One PO had been created for 1 Quantity 3 years ago. There was no GR/IR document posted against that PO. Now that PO had been archieved from SRM. But still PO is available in ECC with open quantity and also its appearing in the open PO report. Now requester wanted, the PO to be closed in ECC and shouldnot appear in the open PO list.
How to handle this situation.. How to close the extended classic PO in ECC at this scenario. As PO not available in SRM, we can not do anything from SRM side.
Your inputs are appreciated....
Regards
Sivakumar Kandasamy

Hi Sivakumar,
If you mean how to archive PO in MM side, please refer to the following info:
====
In ECC system, if you want to archive a MM PO, please use transaction
SARA->archive object MM_EKKO.
456129 FAQ: Archiving in purchasing
401318 Archiving: Additional information
====
If you want to delete this ECC PO, please use BAPI_PO_CHANGE and
refer to the following test data:
Parameters:    PURCHASEORDER      = XXXXXXXXX
Parameters:    POITEM
PO_ITEM                        = 00010
DELETE_IND                     = X
Parameters:    POITEMX
PO_ITEM                        = 00010
PO_ITEMX                       = X
DELETE_IND                     = X
You also need to run BAPI_TRANSACTION_COMMIT after BAPI_PO_CHANGE for updating the change.
Regards,
Ivy

After the update I don't know how to close running apps? I recall double clicking the main button then hold one app until they begin a jiggling motion. But that no longer works.

How do close running apps?

You still double tap the home button and the apps are lined up across the screen. Swipe up on the app preview thumbnail - drag it up off of the screen - and that will close the app.

How to close iOS7 apps?

Prior to iOS7 you simply double clicked the home button to show open Apps and you could then close them all down. That doesn't seem to happen with iOS7. Any idea how to close open Apps?
... The learning curve beings

Thanks ...
That's what I was trying, but I guess I was doing so to quickly. Once I slowed down they finally moved. Now ... if the former Apps wouldn't crash I'd be all set, ROFL. Going to be a learning curve for the developers as well I think.
So much to learn

Can anyone advise how to close apps on iPad with new iOS? I have multiple open and cannot close them.

Can anyone advise how to close apps with the new iOS? I have multiple open and cannot close them

Double-tap on the Home button. You will see a preview of the app above the actual icon. Slide the preview up to kill it.
Please get the iPhone User Guide (For iOS 7 Software)Sep 19, 2013 - 23 MB.

How to close a service PO

Similar Messages

Maybe you are looking for