How to close all alerts?

Hello ,
when i open plug in and perform opration then alert window show. i want to close that alert on menu item click.how to close all alerts on button or menu item
click?can any body help me?

Double click the home button. Swipe up toward the top of the iPhone each icon that you see over an app icon.
When finished, single clock the home button.
This closes each application one at a time.
To close them all together, restore the iPhone.

Similar Messages

How to delete all ALERTS in iCal at once?

Over the years I have added repeating Events with Alerts to iCal on various devices (some of them passed on to my relatives). As a result I get plenty of Alert emails or sounds. I find it onerous to go through all repeating events to delete the alert. Hence my question: how to delete all Alerts at once?
Thanks for any suggestions/pointers/ideas. Cheers, Veit

Hi John,
Thanks so much for your help with this problem. I am trying to remove alerts for a couple of specific shared calendars (which I can edit) but am having some difficulty due to my inexperience with applescript! I am also not sure where else to go for help solving this problem.
My plan is to run your script a couple of times specifying one calendar at a time by name.
This is the modification I made to your script:
tell application "Calendar"
activate
          delay 0.5
          display alert "Removing all alarms from your editable calendars" message "This process may take some time and is permanent. Are you sure you want to do this?" buttons {"Yes", "No"} cancel button 2
          set calname to "Consultant_on_call"
--- repeat with myCalendar in (calendars whose writable is true)
          repeat with myCalendar in (calendars whose name is calname)
                    repeat with myEvent in events of myCalendar
delete display alarms of myEvent
delete mail alarms of myEvent
delete sound alarms of myEvent
delete open file alarms of myEvent
                    end repeat
          end repeat
          display alert "Removing all alarms from your editable calendars" message "This process is complete." buttons {"OK"} default button 1
end tell
Are you able to tell me what I am doing wrong? Thanks again.
Andrew

How to close all session in OBPM 10gR3

Hi all,
I want to know how to close all sessions in engine.
Because if there is some sessions in engine,the Directory polling is not take effect.
(we can not restart engine.)
Best Regards,
Freeman

BPM Studio (10g) is just a plugin for eclipse. To install other plugins, just use the Help - Software Updates - Find and Install
HTH,
-Kevin

Cannot download application world- how to close all the browser windows

i cannot download the blackberry application world "sorry, your session has expired. Please close all of your browser windows and then return to the welcome page to start again." How to close all the browser windows?

Hello numadia
Welcome to BlackBerry Support Forums
Is your problem resolved or you're still having problem with download BlackBerry world !
If you're having problem then just peform a Battery pull restart by removing the battery while your device is Powered On, wait for a min. then reinsert it back after reboot please try it again.
If problem persists then you can also go through this Knowledge Base KB32113
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

How to close all applications at once in an iPhone ?

how to close all applications at once in an iPhone ?

Double click the home button. Swipe up toward the top of the iPhone each icon that you see over an app icon.
When finished, single clock the home button.
This closes each application one at a time.
To close them all together, restore the iPhone.

How to close all tabs XP/FF6

How do I close all tabs without existing FF6? I can close every tab except the final tab that is opened.

Set the pref browser.tabs.closeWindowWithLastTab to false on the about:config page to prevent closing the last tab from closing the browser and make a close button appear if only one tab is open.
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold(user set).
*Preferences can be reset to the default or changed via the right-click context menu.

How to cancel all alert email in WF_NOTIFICATIONS_OUT Queue.

Hi,
Could any body show how to cancel all the alert email present in WF_NOTIFICATIONS_OUT queue.
We are running 12.0.4. i have seen Doc. id. 433359.1 Tracking Workflow Notification Event Messages.
According to this before i can recreate the queue i need to process the alert emails.
I do not want these alert emails to be processed since it is a clone instance. I want it to either go to a test email account or to be discarded
completely.
I know how to send it to test email account by using setoverrde address functionality in OAM. But for that to be set i need to start the mailer (which is currently down), if i start, it will start firing these pending alert emails in WF_NOTIFICATIONS_OUT.
Kindly suggest.

Hi,
These documents talk about purgin WF_NOTIFICATIONS_OUT queue. But document i mentioned
says.
7. Try rebuilding the WF_NOTIFICATION_OUT queue if necessary
The wfntfqup.sql script rebuilds the WF_NOTIFICATION_OUT queue by dropping and recreating
that queue, removing pending notification messages from the WF_DEFERRED queue, and
repopulating the WF_NOTIFICATION_OUT queue from the Oracle Workflow Notification System
tables.
Wfntfqup.sql Version >=115.9
If you have implemented Oracle Alert and the WFNOTIFICATION_OUT queue contains any pending_
alert e-mail messages, those messages must be processed before the queue can be rebuilt. The
wfntfqup.sql script checks the queue for any alert e-mail messages and, if it finds any, the
script returns an error message that specifies how many alert e-mail messages are pending
and indicates that these messages must be processed before the script can run.
Kindly suggest.

How to close all opened apps?

How do you close all opened apps? I do not think sliding the app card off the screen closes the app, so how do you completely close them?
Post relates to: HP TouchPad (WiFi)

sinanju wrote:
... which does not directly answer the question...
Direct answer: you can't.
Here is what the User Guide says:
To close an application or a screen, in Card view (see Manage
applications in Card view), throw the card off the top of the screen. If
cards are in a stack (see Work with stacked cards), you can only throw
one card at a time.
You close the apps by throwing the card away, plain and simple.
@direstrates: Are you asking how to kill all running apps with one command? Only way I know how is by doing the two-finger reboot.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

RV042 - How to close all ports and leave some specific open

Hello everybody,
Here is the scenario of my network:
- A company with 20 branches in Rio de Janeiro area. The main servers are in a datacenter located in downtown.
Each branch has a RV042 router with firmware version 1.3.12.19-tm (Feb 13 2009 13:03:21) installed.
All users in this network have a proxy configuration pointing to proxy.[blah].com.br port 3128.
The HTTP/HTTPS traffic should go through proxy only.
The network settings for every RV042 are similar:
RV042 LAN IP = 172.16.***.1 /24.
RV042 WAN IP = 192.***.***.*** /30.
Network Setting Status
LAN IP: 172.16.***.1 /24
WAN1 IP: 192.168.***.*** /30
WAN2 IP: Not used
Mode: Router
DNS(WAN1): 208.67.220.220 / 208.67.222.222 [OpenDNS Service]
DNS(WAN2): Not used
Firewall Setting Status
SPI (Stateful Packet Inspection): On
DoS (Denial of Service): On
Block WAN Request: On
Firewall -> Access Rules Section: Please see below
The problem:
- Some "smart" users were caught using Ultrasurf application, which changes the proxy settings to go through port 9666 or even 443.
In other machines, we've found some black proxies [for example: 212.46.27.142 port 8080].
My objective:
- To close all ports in Firewall -> Access Rules section and grant permission only to some selected and specified ports.
- To redirect all HTTP/HTTPS connections to go to proxy's IP address only.
Gentlemen, could you please tell me which Access Rules can I set in these RV042s in order to block and prevent these users to continue abusing this network? Is there anything else am I missing?
P.S.: The users who were caught using Ultrasurf were fired. ;-)
I gladly appreciate your comments.
Thanks in advance,
Luciano

Hello Randy,
Thanks for your answer. But let me tell you better. In this scenario, all machines in LAN can use RDP and VNC normally.
I want to block everything else, just to avoid users to try using other ports.
You might want to try Deny all traffic out, except for the PC's you need to use RDP, and then only allow 80, and 443 to the proxy.[blah].com.br port 3128. This way all web traffic would have to pass through that proxy, otherwise it would be denied.
In this network, we use VNC to provide remote IT support to users in these branches.
They use RDP to access some servers in the datacenter.
I think that the rule below line 6 is letting users go and traverse the proxy.
Priority    Policy Name    Enable    Action    Service        Source Iface    Source    Destination        Time    Day
*                                                  Allow    All Traffic [1]             LAN     Any        Any                  Always
How can I modify this access rule? It seems it cannot be altered.
Thanks in advance,
Luciano

How to close all subfolders in a folder

I have seen this question, or similar, in several places, but haven't seen an answer. Sometimes the question is not well stated or understood. So, here goes one more time.
Suppose you have a folder named House. Inside House are subfolders named Kitchen, Bedroom1, Bedroom2, Bathroom......
Now, after browsing through all the subfolders inside House, they are all open, showing their internal files, and filling up the screen, makeing a cluttered mess.
I would like a simple command to close all the subfolders inside House in order to clean up the mess.
Is there a way to do this with an existing command, script, or Automator?
Thanks

My reply above had a lot more in it, but it got lost, so here goes.
The keystroke combo opt-click closes the main folder and all the subfolders, so you can't actually see what happened until you reopen the main folder. Then you see all the internal folders are closed. My main use for this function it to leave the main folder open while closing all the subfolders. To do this requires reopening the main folder. There are several options:
1) opt-click followed by click closes the main folder and all the subfolders, then repoens the main folder with all the subfolders closed.
2) opt-click followed by opt-click first closes the main folder and all the subfolders, then reopens the main folder with all the subfolders open again (back where you started from).
I tried to make an Automator macro that would do 1) with one mouse click (with suitable modifier keys), but I didn't know enough to make it work. I could get automator to do it while Automator was open by clicking on Run, but I couldn't get a macro that would work directly from a mouse click without opening Automator. Tried the same thing in Keyboard Maestro with the same results.
I would love to have something like ctrl-opt-click that would do the whole sequence 1) above in one stroke.
Oh well, it works fine with several steps.

IOS 8 - How to Close All Open Tabs in Safari?

ioS 8 - Is there a way to close all open tabs in Safari on the iPhone? The workaround in iOS 7 was to hit the "Private" button and then click "Close All Tabs," but that no longer works with the revised private browsing method. Clicking each tab to close multiple tabs is burdensome if there are a lot open.

Yes, this is VERY painful after a few days of using Safari: Having to close one window at a time. Ugh.

How to Close all Oracle services on Win XP?

While I was trying to install Dev/2k on Win XP, I got a message to close all Oracle services before I proceed with the installation. In Windows NT, I simply open Services folder from the control panel and shut down the desired srvice, but there is no such a thing on Win XP...
Any input would be helpful.
Thank you much in advance.

Go to Control Panel --> Administrative Tools --> Services and find all the service names starting with Oracle and right click to manually stop each one.

How to position all alert messages in a particular position?

Hi All,
I have developed a Application where it contains so many Alert Messages and i want display All Alert messages in a particular position of respected screen. I have tried the following code but it works for individual alert messages. I don't want to set x and y properties individually, i want set x and y properties globally. Is there any way that i can apply for all the alert messages in my application.
myAlert = Alert.show('Hello World');
PopUpManager.centerPopUp(myAlert);
myAlert.x = 0;
myAlert.y = 0;
Thanks in Advance

You could override the Alert class. This would like something like:
public class MyAlert extends Alert {
public get x():void {
return 0;
public get y():void {
return 0;

How to close all active connections in Times ten database

Hi,
I am new to Times Ten database.
Uisng ttsatus utility I am able to find our the active conenctions but not sure how to close this. I m using windows as OS
Request your help in this regards
Regards,
Harmeet

Is there a way to manually kill a lock from a transaction or roll back transaction etc.
In oracle, we just kill the user session.
I have an issue with read-only cache, stuck with the below lock.
I end up in bouncing the dameon (!!@!@)
stopping cachemanager took time.. but still this lock was active.
========================
[ttadmin:lmmk672@MARTD] /psimofmmk2/TimesTen/palmttd1/bin > ttXactAdmin palmttd1
2012-05-31 13:48:23.872
/psimofmmk2/TimesTen/data/palmttd1/data/palmttd1
TimesTen Release 11.2.2.2.0
Outstanding locks
PID Context TransID TransStatus Resource ResourceID Mode SqlCmdID Name
Program File Name: timestensubd
12743 0x2aafe00008c0 138.1298 Active Database 0x01312d0001312d00 IX 0
Program File Name: timestenorad
13824 0x2aaff8199410 12.83968 Active Database 0x01312d0001312d00 IX 0
Command 21019064176 S 21019064176
Table 1732240 W 21018623224 PALM_DBO.EXTRNL_AVAILABILITY_COMBD
Row BMUFVUAAAAaAAAAJBu S 21018623224 SYS.TABLES
Row BMUFVUAAAA3AAAAEhq Sn 21018623224 SYS.CACHE_GROUP
Table 1732480 S 21018623224 PALM_DBO.T10_TEST
Row BMUFVUAAAAaAAAAIBv S 21018623224 SYS.TABLES
Row BMUFVUAAAA3AAAADhr Sn 21018623224 SYS.CACHE_GROUP
Table 1732528 S 21018623224 PALM_DBO.EXCHANGE_TIME
Row BMUFVUAAAAaAAAALBv S 21018623224 SYS.TABLES
Row BMUFVUAAAA3AAAAEhr Sn 21018623224 SYS.CACHE_GROUP

[IPhone SDK] How to close all pages after safari exit

Apps close when you hit the home screen, however i find that Safari seems to keep multiple pages open even you close it , which no doubt uses memory. so does anyone know how to close these pages after safari exit ? Thanks very much.

Does anyone know it , please give me some advises , thanks very much.

How to close all alerts?

Similar Messages

Maybe you are looking for